Remove the assy check for any moving parts that are broken or have extreme play
@JamesMorel-yw2fdАй бұрын
I thought the same shit hahaha
@lherout4 ай бұрын
this happened to me when I installed new clutch. There is a one-way bearing behind the primery clutch and when this bearing is damaged this sound occures. And also the bearing has to be installed of course in the correct direction. (first time I somehow succeded to install it wrong). After I turned the one-way bearing in the correct direction everything turned perfect. The first sign of damaged one-way bearing is that the clutch runs all the time even without throttle. Normally when everything works well when the throttle is not pushed then the clutch shouldnt rotate.
@Legend.Cam426 ай бұрын
bearing or bushing, check the belt, on the bottom side it might have a broken peace flapping around
@Landrews20236 ай бұрын
Mine makes a clicking noise when you start driving and it’s right underneath the seat idk what it is
@amused2deth6 ай бұрын
Only while driving?
@jared6114 ай бұрын
Probably valve clearances
@jaydowwg81509 ай бұрын
So what was the problem?? Mine us doing the same making that noise
@amused2deth9 ай бұрын
The shims inside needed to be replaced every 1k miles. It ruined something, can't remember the name, but it was $500 just for that part so I bought a new clutch for around the same price.
@jaydowwg81509 ай бұрын
@@amused2deth damn and did u put it on? And thanks for getting back
@amused2deth9 ай бұрын
@@jaydowwg8150also I had a shop near by that took the bottom part off. I could do the top but I didn't have anything to take the bottom off.
@jaydowwg81509 ай бұрын
@@amused2deth thank u
@kaydenpla271510 ай бұрын
Does it go into drive
@amused2deth10 ай бұрын
Yes. Even like this it went forward.
@user-xv7ch7qo5d Жыл бұрын
que medida debe ser la banda q lleba ?
@MikeJ-xq7oc Жыл бұрын
Old Ward Canyon Road - Buckland Ridge Trail
@MikeJ-xq7oc Жыл бұрын
Not Farmington Canyon - Bountiful - Skyline Drive
@mikepaciorek3412 жыл бұрын
Had the same issue. Removed clutch. Started the mule back up,noise gone. Replaced with new clutch,the noise came back. Took the vehicle to the dealership,45 minutes later it was solved. They replaced a defective spark plug wire. Now I have a spare clutch.
@travisculpepper209110 ай бұрын
😅😅
@5kservice2 жыл бұрын
WhTs the ticking noise have same noise plz tell me
@HaveUSeenMyBaseball862 жыл бұрын
Little red plastic Shims are bad. Or white
@mixedvids8132 жыл бұрын
Did you ever figure out the problem? Mine does the same thing please help!! Thanks.
@amused2deth2 жыл бұрын
Yeah, my shims inside the clutch wore out. Gotta to check or replace them every 1k miles.
@mixedvids8132 жыл бұрын
@@amused2deth Okay thank you, long time ago but you wouldn't recall the part number for the shims would you haha? Thanks!
@amused2deth2 жыл бұрын
@@mixedvids813 I ended up just getting a new clutch since replacing something on it would cost just as much. I can't remember the part.
@mixedvids8132 жыл бұрын
@@amused2deth Right on my clutch is brand new turns out transmissions shot. Use to drive now its stuck in reverse shift linkage is great. Only other thing it can be is the trans. Bummer! Thanks for the responses, take it easy!!
@soulmedicine2 жыл бұрын
The clutch weights are stuck so it won't disengage lol
@tackdriverCA2 жыл бұрын
She’s clapped
@noopy91642 жыл бұрын
Older video but hopefully you might respond, when does the gates open for the summer and do they open at all during winter? Thanks!
@amused2deth2 жыл бұрын
Summer I'd say Memorial Day weekend. There is a way around the gate if they haven't fixed it. Closes during winter since there is no road maintenance.
@chadhobbs71952 жыл бұрын
Mine does this and I’ve put 3 brand new clutches on any suggestions
@amused2deth2 жыл бұрын
Take the clutch in every 1k miles and have the maintenance done.
@chadhobbs71952 жыл бұрын
It’s brand new and still does it
@amused2deth2 жыл бұрын
Does it idle high?
@chadhobbs71952 жыл бұрын
No it just started doing this out of nowhere. Take the clutch off sound goes away put clutch back on it starts again only when you give it gas
@amused2deth2 жыл бұрын
@@chadhobbs7195 I'm not sure, I don't have the tools to take a clutch apart. The only think I can think of is maybe the weights? Have you asked on the forums?
@ExtremeMetalproducts3 жыл бұрын
here is a fix kzread.info/dash/bejne/d4dl2qSaYtWrobw.html
@eldeguasavevalenciacazarez85273 жыл бұрын
Lo mismo le pasa a un rzr 800 que tengo 👌
@abelcruz85302 жыл бұрын
Como saber que necesito cambiar el cluch? Le agradecería su comentario yo apenas compre una 4 wheeler....cuando esta en parking y la aceleró empieza como que la banda no se tensa rápido
@vader-order6644 Жыл бұрын
Slider shoes clutch cambialos
@coreyboles89063 жыл бұрын
Does yours flip over or come off ever
@amused2deth3 жыл бұрын
What do you mean? The belt? No.
@adamdesalvo69493 жыл бұрын
These clutches really need to be rebuilt like every 800 miles or so. And I know 800 miles doesn't sound like a lot but it really is on an ATV. Especially if you have swamped it and you've ever gotten water or mud in the clutch. My sportsman 570 has about 400 mi on it and I have sucked muddy water in my CVT and my clutch is getting rebuilt before it even causes an issue.
@guerom13673 жыл бұрын
Mine has a loud squeal. Don't know if its the clutch tho. Sure not the band cuz i changed it
@reallife28493 жыл бұрын
Mine has a stuck one way bearing between the sheaves and it does the same thing .
@guerom13673 жыл бұрын
@@reallife2849 i don't know much about being a mechanic but eventually ill muster up the courage and take it apart
@stephenupchurch80253 жыл бұрын
My polaris 425 magnum takes of when I start if in drive or reverse. Will run fine in neutral. Put in gear takes off. Clutch bad?
@TOPSHOTDroneFilms3 жыл бұрын
Neat scenery mate👊.
@amused2deth3 жыл бұрын
Thanks! Experimenting a little here in editing.
@dermitdemalles3 жыл бұрын
Thats a Great Video 👌 Big Like ❤️ Subscribe your Chanel ✌️I flight Drone too 🍻
@amused2deth3 жыл бұрын
Thank you! I'd like to see some videos if you have any.
@OwlEyeDroneServices3 жыл бұрын
Ooooooh this footage is amazinggg 😍😍😍 such a beautiful place!
@amused2deth3 жыл бұрын
Thank you, it's ok lol. I like this place more when it's greener.
@OwlEyeDroneServices3 жыл бұрын
@@amused2deth oh yea, I'm sure it is beautiful in the spring 😍
@kfuller14193 жыл бұрын
Gonna have much larger problems when that loose bolt (top left) falls inside the clutch
@dave1the1deer1hunter3 жыл бұрын
it makes me feel uneasy watching it dangling waiting to fall in
@money_murda2212 жыл бұрын
Lmfao holy fuck I screamed out loud when I read this and then seen the bolt dangling
@steveshook73313 жыл бұрын
This is why I sold my polaris and bought a Honda.honda doesn't use a belt drive golf cart system.
@amused2deth3 жыл бұрын
Yeah one of my friends swears by Honda. I got to take it out and loved it. If and when I get a new one, Honda is definitely on my list!
@robin641903 жыл бұрын
did you solve it and what was the problem ?
@amused2deth3 жыл бұрын
Yes, there are shims in the clutch that need to be replaced every 1000 miles.
@jjohnston6645 Жыл бұрын
@@amused2deth Did they do the primary or the secondary clutch?
@amused2deth Жыл бұрын
@@jjohnston6645 primary
@jjohnston6645 Жыл бұрын
@@amused2deth I rebuilt my clutch and installed new spring, primary clutch engages to soon like the spring is weak, I think I need a stiffer spring or shims, i can't find any info on this
@amused2deth Жыл бұрын
@@jjohnston6645 I did the same. Very happy I did it. I went with more low than high. I like enjoying the scenery.
@gaygore14143 жыл бұрын
Would this make your rzr to shot off every time you put in gear???
@amused2deth3 жыл бұрын
No it just made it so I had to give it more throttle to move.
@joshuamullins97243 жыл бұрын
Your belt is too tight buddy. But I'm sure you've figured that out by now
@reviloford50723 жыл бұрын
Wow. That is impressive! Fitting music selection. Well done 👏
@NRV.MediaLLC3 жыл бұрын
Awesome shots Dave! Super cool!
@austingreenthumb3 жыл бұрын
Looks sweet! Found this Video because I am actually going to take my gravel bike there today and just doing some re-con. Ill post a video of my ride!
@davidjones45813 жыл бұрын
Right on! Let me know when you upload. I'd like to check it out!
@dronature4 жыл бұрын
Insane
@brickhawaii56614 жыл бұрын
very smooth flight well done
@amused2deth4 жыл бұрын
Thank you
@nostuckmarc86824 жыл бұрын
I noticed you had comments turned off on Ogden Canyon. However random nice little video it was.
@amused2deth4 жыл бұрын
I noticed that. I'll go find it and change it. Thank you!
@nostuckmarc86824 жыл бұрын
@@amused2deth just saying was a good video though.
@AdolfHitler-tq6cy4 жыл бұрын
Yessah my clutch was making the same noise today, thought the belt ripped but when I was limping it home, a loud bang came from the belt case and it rolled to a stop, revs up fine tho just won’t move
@georgevaughn85064 жыл бұрын
Helix I'm sure
@binksrobert3 жыл бұрын
I had the same thing happen to me and it turned out to be a screw from the back dust cover walk out and was hitting the back of the cluch
@isaacbeauchamp90383 жыл бұрын
Bearings blew out happend to mine, i just had to put um back in
@chrisdrennan41023 жыл бұрын
@Billy Hickey If reverse works but froward doesn't, I'd start at the chain case or the track drives.
@wicked.mainah59942 жыл бұрын
Are you from Maine bub? Lol
@hesjevoll5 жыл бұрын
the problem is its a polaris cluch
@ringogreene96815 жыл бұрын
Take face of the clutch and take out spring and do not but spring back in and put back on the face and then should rub
@lostonlongisland68454 жыл бұрын
say what?
@adamkazmar86296 жыл бұрын
What did you edit this with email me your answer like in my KZread bio
@jmj2676 жыл бұрын
No really what was the problem I'm very curious
@amused2deth6 жыл бұрын
John jay drott lol. This clutch has a maintenance schedule which I didn't know. The shims inside wore out and started to wear another. So now I just did a whole new clutch and take it in every 1k miles. It was cheaper to do a new clutch and I can do custom springs.
@1000MSean3 жыл бұрын
Dave Lucero did you put the shims in the secondary?
@amused2deth3 жыл бұрын
@@1000MSean the secondary didn't have shims
@douglee96026 жыл бұрын
The clutch is like a Arctic cat, I would guess that it is stripped and or cracked spider .
@keithmanvell67516 жыл бұрын
Check for lint in pirmary clutch from rodents. Clutch isn't coming all the way out to disingage the belt.
@stevegarbacz85736 жыл бұрын
Sounds like a ticking time bomb. Buy a shorter belt as it's always engaged on the clutch shaft.
@joefazio39427 жыл бұрын
I would highly recommend removing that dangling screw in the upper right .......your clutch sounds shot, you certainly don't need a screw dropped and launched. Could really hurt someone...
@nolanmitchell73196 жыл бұрын
Buddy that's your LEFT
@joelstephens23325 жыл бұрын
And un likely will it fly at some one if it fell
@juanvaca23627 жыл бұрын
Son los pesos de balance
@fernandocobos71356 жыл бұрын
Juan Vargas Carranza comoes q funcionan esos. Me lo podrias decir. Mi moto ase exactamente lo mismo
@fernandoheras14506 жыл бұрын
Son los k lleva adentro k son 5
@eldeguasavevalenciacazarez85273 жыл бұрын
El tronido no es normal ?
@josealonsosolorzanopinot2722 жыл бұрын
Cual es la reparación Juan mi Cuatrimoto hace el mismo ruido
@LukeLibby7 жыл бұрын
do people take jeeps up there? or is it mostly a quad/bike trail?
@amused2deth7 жыл бұрын
Luke Libby yes. they take anything that has 4 wheel drive.
@stankdog13577 жыл бұрын
thats a torque converter cvt
@quadrophobia65357 жыл бұрын
Nice Video! Keep them coming!
@amused2deth7 жыл бұрын
Thank you! I have a couple I need to edit and put up.
Пікірлер
Remove the assy check for any moving parts that are broken or have extreme play
I thought the same shit hahaha
this happened to me when I installed new clutch. There is a one-way bearing behind the primery clutch and when this bearing is damaged this sound occures. And also the bearing has to be installed of course in the correct direction. (first time I somehow succeded to install it wrong). After I turned the one-way bearing in the correct direction everything turned perfect. The first sign of damaged one-way bearing is that the clutch runs all the time even without throttle. Normally when everything works well when the throttle is not pushed then the clutch shouldnt rotate.
bearing or bushing, check the belt, on the bottom side it might have a broken peace flapping around
Mine makes a clicking noise when you start driving and it’s right underneath the seat idk what it is
Only while driving?
Probably valve clearances
So what was the problem?? Mine us doing the same making that noise
The shims inside needed to be replaced every 1k miles. It ruined something, can't remember the name, but it was $500 just for that part so I bought a new clutch for around the same price.
@@amused2deth damn and did u put it on? And thanks for getting back
@@jaydowwg8150also I had a shop near by that took the bottom part off. I could do the top but I didn't have anything to take the bottom off.
@@amused2deth thank u
Does it go into drive
Yes. Even like this it went forward.
que medida debe ser la banda q lleba ?
Old Ward Canyon Road - Buckland Ridge Trail
Not Farmington Canyon - Bountiful - Skyline Drive
Had the same issue. Removed clutch. Started the mule back up,noise gone. Replaced with new clutch,the noise came back. Took the vehicle to the dealership,45 minutes later it was solved. They replaced a defective spark plug wire. Now I have a spare clutch.
😅😅
WhTs the ticking noise have same noise plz tell me
Little red plastic Shims are bad. Or white
Did you ever figure out the problem? Mine does the same thing please help!! Thanks.
Yeah, my shims inside the clutch wore out. Gotta to check or replace them every 1k miles.
@@amused2deth Okay thank you, long time ago but you wouldn't recall the part number for the shims would you haha? Thanks!
@@mixedvids813 I ended up just getting a new clutch since replacing something on it would cost just as much. I can't remember the part.
@@amused2deth Right on my clutch is brand new turns out transmissions shot. Use to drive now its stuck in reverse shift linkage is great. Only other thing it can be is the trans. Bummer! Thanks for the responses, take it easy!!
The clutch weights are stuck so it won't disengage lol
She’s clapped
Older video but hopefully you might respond, when does the gates open for the summer and do they open at all during winter? Thanks!
Summer I'd say Memorial Day weekend. There is a way around the gate if they haven't fixed it. Closes during winter since there is no road maintenance.
Mine does this and I’ve put 3 brand new clutches on any suggestions
Take the clutch in every 1k miles and have the maintenance done.
It’s brand new and still does it
Does it idle high?
No it just started doing this out of nowhere. Take the clutch off sound goes away put clutch back on it starts again only when you give it gas
@@chadhobbs7195 I'm not sure, I don't have the tools to take a clutch apart. The only think I can think of is maybe the weights? Have you asked on the forums?
here is a fix kzread.info/dash/bejne/d4dl2qSaYtWrobw.html
Lo mismo le pasa a un rzr 800 que tengo 👌
Como saber que necesito cambiar el cluch? Le agradecería su comentario yo apenas compre una 4 wheeler....cuando esta en parking y la aceleró empieza como que la banda no se tensa rápido
Slider shoes clutch cambialos
Does yours flip over or come off ever
What do you mean? The belt? No.
These clutches really need to be rebuilt like every 800 miles or so. And I know 800 miles doesn't sound like a lot but it really is on an ATV. Especially if you have swamped it and you've ever gotten water or mud in the clutch. My sportsman 570 has about 400 mi on it and I have sucked muddy water in my CVT and my clutch is getting rebuilt before it even causes an issue.
Mine has a loud squeal. Don't know if its the clutch tho. Sure not the band cuz i changed it
Mine has a stuck one way bearing between the sheaves and it does the same thing .
@@reallife2849 i don't know much about being a mechanic but eventually ill muster up the courage and take it apart
My polaris 425 magnum takes of when I start if in drive or reverse. Will run fine in neutral. Put in gear takes off. Clutch bad?
Neat scenery mate👊.
Thanks! Experimenting a little here in editing.
Thats a Great Video 👌 Big Like ❤️ Subscribe your Chanel ✌️I flight Drone too 🍻
Thank you! I'd like to see some videos if you have any.
Ooooooh this footage is amazinggg 😍😍😍 such a beautiful place!
Thank you, it's ok lol. I like this place more when it's greener.
@@amused2deth oh yea, I'm sure it is beautiful in the spring 😍
Gonna have much larger problems when that loose bolt (top left) falls inside the clutch
it makes me feel uneasy watching it dangling waiting to fall in
Lmfao holy fuck I screamed out loud when I read this and then seen the bolt dangling
This is why I sold my polaris and bought a Honda.honda doesn't use a belt drive golf cart system.
Yeah one of my friends swears by Honda. I got to take it out and loved it. If and when I get a new one, Honda is definitely on my list!
did you solve it and what was the problem ?
Yes, there are shims in the clutch that need to be replaced every 1000 miles.
@@amused2deth Did they do the primary or the secondary clutch?
@@jjohnston6645 primary
@@amused2deth I rebuilt my clutch and installed new spring, primary clutch engages to soon like the spring is weak, I think I need a stiffer spring or shims, i can't find any info on this
@@jjohnston6645 I did the same. Very happy I did it. I went with more low than high. I like enjoying the scenery.
Would this make your rzr to shot off every time you put in gear???
No it just made it so I had to give it more throttle to move.
Your belt is too tight buddy. But I'm sure you've figured that out by now
Wow. That is impressive! Fitting music selection. Well done 👏
Awesome shots Dave! Super cool!
Looks sweet! Found this Video because I am actually going to take my gravel bike there today and just doing some re-con. Ill post a video of my ride!
Right on! Let me know when you upload. I'd like to check it out!
Insane
very smooth flight well done
Thank you
I noticed you had comments turned off on Ogden Canyon. However random nice little video it was.
I noticed that. I'll go find it and change it. Thank you!
@@amused2deth just saying was a good video though.
Yessah my clutch was making the same noise today, thought the belt ripped but when I was limping it home, a loud bang came from the belt case and it rolled to a stop, revs up fine tho just won’t move
Helix I'm sure
I had the same thing happen to me and it turned out to be a screw from the back dust cover walk out and was hitting the back of the cluch
Bearings blew out happend to mine, i just had to put um back in
@Billy Hickey If reverse works but froward doesn't, I'd start at the chain case or the track drives.
Are you from Maine bub? Lol
the problem is its a polaris cluch
Take face of the clutch and take out spring and do not but spring back in and put back on the face and then should rub
say what?
What did you edit this with email me your answer like in my KZread bio
No really what was the problem I'm very curious
John jay drott lol. This clutch has a maintenance schedule which I didn't know. The shims inside wore out and started to wear another. So now I just did a whole new clutch and take it in every 1k miles. It was cheaper to do a new clutch and I can do custom springs.
Dave Lucero did you put the shims in the secondary?
@@1000MSean the secondary didn't have shims
The clutch is like a Arctic cat, I would guess that it is stripped and or cracked spider .
Check for lint in pirmary clutch from rodents. Clutch isn't coming all the way out to disingage the belt.
Sounds like a ticking time bomb. Buy a shorter belt as it's always engaged on the clutch shaft.
I would highly recommend removing that dangling screw in the upper right .......your clutch sounds shot, you certainly don't need a screw dropped and launched. Could really hurt someone...
Buddy that's your LEFT
And un likely will it fly at some one if it fell
Son los pesos de balance
Juan Vargas Carranza comoes q funcionan esos. Me lo podrias decir. Mi moto ase exactamente lo mismo
Son los k lleva adentro k son 5
El tronido no es normal ?
Cual es la reparación Juan mi Cuatrimoto hace el mismo ruido
do people take jeeps up there? or is it mostly a quad/bike trail?
Luke Libby yes. they take anything that has 4 wheel drive.
thats a torque converter cvt
Nice Video! Keep them coming!
Thank you! I have a couple I need to edit and put up.