You should not be loosing reel line to the wreck ! 50 lbs reel line and 30lbs weak link before the rubbing leader.
@F20_foragerАй бұрын
Aye, thanks mate, we should probably switch to this 👍🏼 cheers for comment
@steverpcbАй бұрын
@@F20_forager The weak link can go anywhere, if you need a 50lbs or wire hook length then attach it with the weak link.
@fishypieАй бұрын
i was down cornwall 2 weeks ago, 9 hour coach trip, never again, went on a 2 hour mackerel trip from newquey 11 anglers 5 fish and i had 2 of um, bloody hard work
@F20_foragerАй бұрын
Ah yehhh ha your talking about the unfortunate reality with sea fishing, sometimes your filling boxes up and other times struggli g for a fish. Least you didn't have a blank day 👍🏼
@eoinhwrdirlАй бұрын
weather looks great! Looking forward to seeing some big monsters getting reeled in!
@F20_foragerАй бұрын
Watch this space matey ;)
@PaulLumbardАй бұрын
pouting also make a super tasty fish cake!
@F20_foragerАй бұрын
Few folk saying they make good fish cakes 👍🏼 spot on
@stumagoo3372Ай бұрын
pouting make a great fish pie!
@F20_foragerАй бұрын
Great idea, can't beat a fish pie 👍🏼
@FamasFTW98Ай бұрын
pouting are lovely to eat
@F20_foragerАй бұрын
Very sustainable too, cheers
@davidwalker3500Ай бұрын
Braid it’s a no brainer 👍
@F20_foragerАй бұрын
Thanks David, I'll add your vote to my tally for braid :)
@F20_foragerАй бұрын
Is that because you can feel the fish better ? I can't help thinking it will rot out if it gets a rough life.. we do rinse the reels, but they get beasted
@archstanton6310Ай бұрын
Dont like braid but each to their own.
@claudiumarin55503 ай бұрын
Super
@F20_forager3 ай бұрын
Thanks 👍🏼
@technicstim3 ай бұрын
is that your carbon mon alarm up high in wheelhouse ?
@F20_forager3 ай бұрын
You have sharp eyes, the MCA surveyor said we had to have one when we got the boat
@technicstim3 ай бұрын
@@F20_forager needs to be down lower mate in an inclosed space by time it goes off up there you have already passed out !!
@F20_forager3 ай бұрын
Cheers for getting in touch Tim, think maybe I'll get a second one and stick it lower to be covered. Cheers. Yeh, we initially put it there as I read CO is slightly lighter than air, and these alarms are designed to be installed head height or just below the ceiling. That said, we nearly always have the wheelhouse door pinned open whilst at sea, for speed of getting in and out, so hopefully no fumes. How's the shark fishing ? :)
@technicstim3 ай бұрын
@@F20_forager im same mate doors always open. mines just above where the kettle boils sort of waist height
@technicstim3 ай бұрын
no sharking yet got to swap out gear box and fit new ring gear mate
@stephenriordan26163 ай бұрын
🤠
@stephenriordan26163 ай бұрын
Nice one! Good to see ye havin the craic!!🥳
@F20_forager3 ай бұрын
😁
@eoinhwrdirl3 ай бұрын
Awesome 👍
@F20_forager3 ай бұрын
Thank you! Cheers 👍🏼
@Outta_Towna823 ай бұрын
😎👍🏻
@F20_forager3 ай бұрын
👍🏼😎
@hesalovelybuoy59443 ай бұрын
good upload again
@F20_forager3 ай бұрын
Thank you
@user-ze5pg9ho6n4 ай бұрын
Who manufactured the FH 20 forager?
@F20_forager4 ай бұрын
Believe the Hull to be a Newhaven Fisher. Was told 3 were made but not seen another one yet.
@Outta_Towna824 ай бұрын
😎👍🏻
@F20_forager4 ай бұрын
😎🤙🏼
@derek65794 ай бұрын
Good stance in lumpy conditions, and if you went overboard it would be recorded nicely😂
@F20_forager4 ай бұрын
Haha, pitching baseballs
@theforexresistance92094 ай бұрын
do you have instagram? where are you based?
@F20_forager4 ай бұрын
#Fh20_forager based in Cornwall
@theforexresistance92094 ай бұрын
@@F20_forager Nice im based in falmouth saw your boat is FH does it operate out of falmouth?
@F20_forager4 ай бұрын
Ah nice 👍🏼 yeh, we are registered to Falmouth and currently fishing out of the Helford River
@paulphillips37444 ай бұрын
Pretty neat! Love the underwater bit as it gives a better idea of how they work. As I'm Somerset based I tend to use the wild willow withies for my projects. Keep it up.
@F20_forager4 ай бұрын
Cheers 👍🏼 aye, willow withies are an amazing material. Thanks for the feedback
@blindhowlingdrunk4 ай бұрын
That mistake with the compass could have been deadly…
@F20_forager4 ай бұрын
It's a very easy one to make too ! Have to watch out for any metal that affects them. Sounds obvious, but it caught me out that time
@acswales4 ай бұрын
I'm saying the fish are are scad/horse mackerel. Do I get a prize? Very interesting video.
@F20_forager4 ай бұрын
You're the first to ID the fish. Full points :) Cheers
@Ournewlife5904 ай бұрын
I’m also starting to experiment with pots mines from a kayak so on a much smaller scale but it’s all learning and I’m loving the videos
@F20_forager4 ай бұрын
Cheers. Good skills launching pots from a kayak. Nice and sustainable 👍🏼
@user-ze5pg9ho6n4 ай бұрын
The bait bag must be anchored to the middle bottom of the willow pot. Perhaps trap makers could add a wood bar across trap bottom. Bait bag quickly tucks under bar.
@F20_forager4 ай бұрын
Like it, will make the suggestion, cheers 👍🏼
@user-ze5pg9ho6n4 ай бұрын
I like your site. I’ve seen you legally catch, and keep mackerel, hake, pollack, crab, lobster. What other spices can you legally land? Do you have individual species quotas, or is it a fixed tonnage with a free for all to fill it? Curious minds want to know. Cheers
@F20_forager4 ай бұрын
It's to do with the type of license entitlement. This is then registered against the commercial fishing boat (has to match the boat KW and Tonnage). Can read more here: www.gov.uk/guidance/do-i-need-a-fishing-vessel-licence
@F20_forager4 ай бұрын
The species list and catch limits are variable, too. Take this year, for example. Pollock is no take due to low stock levels
@user-ze5pg9ho6n4 ай бұрын
@@F20_forager as the pollack quota is closed to you, does your daily mackerel catch allowance increase? What is your daily mackerel allowance? Also, am I the only one who thinks those wicker traps, might catch better, if fished on there side? Oak lathes for protection may be required.
@markmartin63654 ай бұрын
I'd be terrified to fish those. If you lose a wire mesh pot it's a money thing. If I lost one of these I would suffer emotional damage.
@F20_forager4 ай бұрын
😂😂 brilliant comment.. Have to say tho, a modern pot, when lost continues to fish on its own, becoming a death pot. Waste. Whereas one of these will break down much faster if lost.. ;)
@markmartin63654 ай бұрын
Northeast region United States lobster pots must have a biodegradable escape hatch. They are not too dependable. The old school half round lathe pots converted to a coffee table are beautiful.
@F20_forager4 ай бұрын
Yeh, a good idea on the escape hatch. What's the half round lathe pots ? Had a Google but didn't pop up 👍🏼
@markmartin63654 ай бұрын
@F20_forager Look up 1970s New England lobster pots. Very nice looking but not as nice as those willow traps.
@markmartin63654 ай бұрын
Very tough fishery. You had to leave your gear unattended to soak. Sometimes you would lose gear to draggers , ships wheels and other traffic. There has been high seas gun fire when someone messes with another man's gear.
@fishypie4 ай бұрын
thats an art in its self. and i bet the pots dont come cheap
@F20_forager4 ай бұрын
Aye, skilful and unique 👌🏼
@debbiejoynson4 ай бұрын
Brilliant video! I've been researching my local Anglesey Ynys Mon lobster pot, I'm about to start experimenting making them soon, jig is made, willow ready. Will keep an eye out for more videos. Great work.
@F20_forager4 ай бұрын
Thank you 👍🏼 the lads making these pots were telling me that traditionally different areas of the coast have different styles of pots, partly due to the different types of grounds they were fished on. Would be interesting to see the Anglesey pots 👍🏼 Hope the making goes well, cheers
@richardcannings98224 ай бұрын
Just well made what's the price of one
@F20_forager4 ай бұрын
I was discussing this with the guys who made them. They are quite labour intensive, but they seem to be getting faster at it. The pots I'm using here were as a trial, and I've not had to pay for them. Will be using them and seeing what I think and giving feedback. If you're looking for a price, it's probably best to give Aaron a shout on his Instagram; treetosea_withypots 👍🏼
@stevel17335 ай бұрын
Brings back memories. If it's 3 ft and choppy, I'm vomiting! Lol
@F20_forager5 ай бұрын
Lol, yes, it definitely gets a bit rough out there in a small boat sometimes :) 👍🏼
@samjones80255 ай бұрын
Fond memories crewing on the Irene. Was on board that day probably making breakfast for the guests.
@F20_forager5 ай бұрын
The Irene, lovely boat! Thanks for comment, good to add to the day from another perspective 👍🏼
@markcourtney72515 ай бұрын
Glad you are back posting videos!
@F20_forager5 ай бұрын
Thank you 👍🏼
@weymufffisher5 ай бұрын
get some nets out!
@F20_forager5 ай бұрын
Aye, we probably should. The boat has a netted bass entitlement. Cheers
@palmarolavlklingholm96845 ай бұрын
Shameless Clickbait.
@F20_forager5 ай бұрын
That's fishing ;) bit of fun and goes with the videos content. Did you enjoy the video anyway ?
@technicstim5 ай бұрын
you can land conger at market help cover your fuel
@F20_forager5 ай бұрын
Aye, thanks 👍🏼 will give landing them a go next time. It all helps, definitely. Should probably go back to this one and have another go to be fair :)
@fishypie5 ай бұрын
god i miss the taste of a mackerel fresh off the hook, can not beet that flavor
@F20_forager5 ай бұрын
It is a cracking fish to eat super fresh ! :)
@lozzfish5 ай бұрын
Great video I love mackerel and sardines. Tight lines lozzfish
@F20_forager5 ай бұрын
Thanks, lozzfish ! May the wind and tide be in your favour 👍🏼
@dom81515 ай бұрын
Cool! But have you found my dive watch yet Tom??
@F20_forager5 ай бұрын
Yooo, hello matey :) noo I haven't actually dived for it yet. Still have the marks on my plotter tho, it's in 16m. We could go take a look with the metal detectors when we get a calm day. Fancy it ? 😀
@TheXJRMAN5 ай бұрын
I would buy all the small mackerel and sardine for pike fishing baits! Awesome way of fishing!
@F20_forager5 ай бұрын
Be welcome to some, can contact me via Instagram fh20_forager 👍🏼 cheers
@robinsvensson-vr3ju5 ай бұрын
😅😅😅😅😅😅😅👍👍👍👍👍
@F20_forager5 ай бұрын
👍🏼🐟
@MrAlexandre32135 ай бұрын
Awesome Tom 😃
@F20_forager5 ай бұрын
Cheers Alex
@markmartin63655 ай бұрын
Definitely sustainable. A box or 2 a day. Artisinal fishery.
@F20_forager5 ай бұрын
Cheers 🍻
@zacluvin765 ай бұрын
Hi mate, I’m a commercial fisherman in St,Ives, I’ve been looking for one of those strippers for ages, if you want to sell it, please let me know
@F20_forager5 ай бұрын
Hi matey, sorry your comment didn't show to me for a while.. just read it. Yeh no worries, not currently looking to sell it but can let you know if I do. Do you know what make it is ? might be handy for spare parts. Cheers
@zacluvin765 ай бұрын
By the looks of it, it was a company called AFWFAB, he stopped making them years ago so I wouldn’t have thought you’d get any spare parts. Please do let me know if you ever want to part with it
@F20_forager5 ай бұрын
@zacluvin76 ahhh yeh cool. Thanks for the information. You're welcome to first refusal on it if I sell it. Cheers
@scottdavies43366 ай бұрын
One handsome Mofo 😊
@F20_forager4 ай бұрын
How's the fishing in Ozzy matey ?
@woodys_woodwork6 ай бұрын
Yeah you put video up ...way too short tho😅
@F20_forager6 ай бұрын
Haha, some more vids soon dude :)
@acswales6 ай бұрын
Also, nice to see you back. Looking forward to the tour of the new bits and bobs you've fitted. I have to say I am very jealous. Your own boat in my favourite part of the world. You are a very lucky man. All the best, till next time.
@F20_forager6 ай бұрын
Thanks very much 👍🏼 aye, still have the hauler to fit back on, might see if can do that with the boat tour vid soon. Then some fishing again 😂 cheers matey
@philbigcod6 ай бұрын
Nice to see you back mate hope you've got lots of footage of engine fitting etc looking forward to the next video and maybe some fishing later all the best
@F20_forager6 ай бұрын
Nice one, cheers matey. Aye, will look to get a few more vids up soonish :) tight lines
@hesalovelybuoy59447 ай бұрын
how did you get into commercial fishing mate? im really interested in this channel. you seem like a great guy
@F20_forager6 ай бұрын
Am commercial diver originally, we bought the boat to give scallop diving a go. The fishing goes hand in hand. Cheers
@F20_forager5 ай бұрын
Hello mate, just saw your comment. Yeh, wanted to give diving for scallops a go. And always liked fishing 👍🏼
@theunknownexplorer83658 ай бұрын
Any new videos planned bud. Hopefully she’s up and running now 👍🏻
@F20_forager7 ай бұрын
Yes for sure, boat is currently stuck in a boat yard. Over a year, super slow. Hoping we get it back ASAP. Hopefully some more fishing vids in New year . Might have a diving one upcoming too
@F20_forager5 ай бұрын
Back up and running :)
@philbigcod10 ай бұрын
Hello mate how's the refit going looking forward to it love the old displacement boats
@F20_forager5 ай бұрын
Hello mate, yes, refit is done. The new engine is in, and the other bits are all finally sorted. Took a long time, but we are there now. I'm still adjusting things and putting the boat in order, but only small stuff now :) Cheers. Will get a video of the refit items up at some point.
@fhorst4111 ай бұрын
Well, I would hope the sound quality gets better. It's difficult to imagine it going in the other direction 😂 That said, good luck with your adventure. I advise you to let your audience know what led you to embark on it in the first place. It's a good place to begin.
@F20_forager11 ай бұрын
Thanks for watching (and putting up with the sound 😂). Was tempted to take the early vids down but decided to leave them as part of the story. Aye, thanks for feedback too
@F20_forager5 ай бұрын
Sound improving now pal ;)
@strollingwithsi11 ай бұрын
Looking forward to seeing the finished refit mate 👍
Пікірлер
You should not be loosing reel line to the wreck ! 50 lbs reel line and 30lbs weak link before the rubbing leader.
Aye, thanks mate, we should probably switch to this 👍🏼 cheers for comment
@@F20_forager The weak link can go anywhere, if you need a 50lbs or wire hook length then attach it with the weak link.
i was down cornwall 2 weeks ago, 9 hour coach trip, never again, went on a 2 hour mackerel trip from newquey 11 anglers 5 fish and i had 2 of um, bloody hard work
Ah yehhh ha your talking about the unfortunate reality with sea fishing, sometimes your filling boxes up and other times struggli g for a fish. Least you didn't have a blank day 👍🏼
weather looks great! Looking forward to seeing some big monsters getting reeled in!
Watch this space matey ;)
pouting also make a super tasty fish cake!
Few folk saying they make good fish cakes 👍🏼 spot on
pouting make a great fish pie!
Great idea, can't beat a fish pie 👍🏼
pouting are lovely to eat
Very sustainable too, cheers
Braid it’s a no brainer 👍
Thanks David, I'll add your vote to my tally for braid :)
Is that because you can feel the fish better ? I can't help thinking it will rot out if it gets a rough life.. we do rinse the reels, but they get beasted
Dont like braid but each to their own.
Super
Thanks 👍🏼
is that your carbon mon alarm up high in wheelhouse ?
You have sharp eyes, the MCA surveyor said we had to have one when we got the boat
@@F20_forager needs to be down lower mate in an inclosed space by time it goes off up there you have already passed out !!
Cheers for getting in touch Tim, think maybe I'll get a second one and stick it lower to be covered. Cheers. Yeh, we initially put it there as I read CO is slightly lighter than air, and these alarms are designed to be installed head height or just below the ceiling. That said, we nearly always have the wheelhouse door pinned open whilst at sea, for speed of getting in and out, so hopefully no fumes. How's the shark fishing ? :)
@@F20_forager im same mate doors always open. mines just above where the kettle boils sort of waist height
no sharking yet got to swap out gear box and fit new ring gear mate
🤠
Nice one! Good to see ye havin the craic!!🥳
😁
Awesome 👍
Thank you! Cheers 👍🏼
😎👍🏻
👍🏼😎
good upload again
Thank you
Who manufactured the FH 20 forager?
Believe the Hull to be a Newhaven Fisher. Was told 3 were made but not seen another one yet.
😎👍🏻
😎🤙🏼
Good stance in lumpy conditions, and if you went overboard it would be recorded nicely😂
Haha, pitching baseballs
do you have instagram? where are you based?
#Fh20_forager based in Cornwall
@@F20_forager Nice im based in falmouth saw your boat is FH does it operate out of falmouth?
Ah nice 👍🏼 yeh, we are registered to Falmouth and currently fishing out of the Helford River
Pretty neat! Love the underwater bit as it gives a better idea of how they work. As I'm Somerset based I tend to use the wild willow withies for my projects. Keep it up.
Cheers 👍🏼 aye, willow withies are an amazing material. Thanks for the feedback
That mistake with the compass could have been deadly…
It's a very easy one to make too ! Have to watch out for any metal that affects them. Sounds obvious, but it caught me out that time
I'm saying the fish are are scad/horse mackerel. Do I get a prize? Very interesting video.
You're the first to ID the fish. Full points :) Cheers
I’m also starting to experiment with pots mines from a kayak so on a much smaller scale but it’s all learning and I’m loving the videos
Cheers. Good skills launching pots from a kayak. Nice and sustainable 👍🏼
The bait bag must be anchored to the middle bottom of the willow pot. Perhaps trap makers could add a wood bar across trap bottom. Bait bag quickly tucks under bar.
Like it, will make the suggestion, cheers 👍🏼
I like your site. I’ve seen you legally catch, and keep mackerel, hake, pollack, crab, lobster. What other spices can you legally land? Do you have individual species quotas, or is it a fixed tonnage with a free for all to fill it? Curious minds want to know. Cheers
It's to do with the type of license entitlement. This is then registered against the commercial fishing boat (has to match the boat KW and Tonnage). Can read more here: www.gov.uk/guidance/do-i-need-a-fishing-vessel-licence
The species list and catch limits are variable, too. Take this year, for example. Pollock is no take due to low stock levels
@@F20_forager as the pollack quota is closed to you, does your daily mackerel catch allowance increase? What is your daily mackerel allowance? Also, am I the only one who thinks those wicker traps, might catch better, if fished on there side? Oak lathes for protection may be required.
I'd be terrified to fish those. If you lose a wire mesh pot it's a money thing. If I lost one of these I would suffer emotional damage.
😂😂 brilliant comment.. Have to say tho, a modern pot, when lost continues to fish on its own, becoming a death pot. Waste. Whereas one of these will break down much faster if lost.. ;)
Northeast region United States lobster pots must have a biodegradable escape hatch. They are not too dependable. The old school half round lathe pots converted to a coffee table are beautiful.
Yeh, a good idea on the escape hatch. What's the half round lathe pots ? Had a Google but didn't pop up 👍🏼
@F20_forager Look up 1970s New England lobster pots. Very nice looking but not as nice as those willow traps.
Very tough fishery. You had to leave your gear unattended to soak. Sometimes you would lose gear to draggers , ships wheels and other traffic. There has been high seas gun fire when someone messes with another man's gear.
thats an art in its self. and i bet the pots dont come cheap
Aye, skilful and unique 👌🏼
Brilliant video! I've been researching my local Anglesey Ynys Mon lobster pot, I'm about to start experimenting making them soon, jig is made, willow ready. Will keep an eye out for more videos. Great work.
Thank you 👍🏼 the lads making these pots were telling me that traditionally different areas of the coast have different styles of pots, partly due to the different types of grounds they were fished on. Would be interesting to see the Anglesey pots 👍🏼 Hope the making goes well, cheers
Just well made what's the price of one
I was discussing this with the guys who made them. They are quite labour intensive, but they seem to be getting faster at it. The pots I'm using here were as a trial, and I've not had to pay for them. Will be using them and seeing what I think and giving feedback. If you're looking for a price, it's probably best to give Aaron a shout on his Instagram; treetosea_withypots 👍🏼
Brings back memories. If it's 3 ft and choppy, I'm vomiting! Lol
Lol, yes, it definitely gets a bit rough out there in a small boat sometimes :) 👍🏼
Fond memories crewing on the Irene. Was on board that day probably making breakfast for the guests.
The Irene, lovely boat! Thanks for comment, good to add to the day from another perspective 👍🏼
Glad you are back posting videos!
Thank you 👍🏼
get some nets out!
Aye, we probably should. The boat has a netted bass entitlement. Cheers
Shameless Clickbait.
That's fishing ;) bit of fun and goes with the videos content. Did you enjoy the video anyway ?
you can land conger at market help cover your fuel
Aye, thanks 👍🏼 will give landing them a go next time. It all helps, definitely. Should probably go back to this one and have another go to be fair :)
god i miss the taste of a mackerel fresh off the hook, can not beet that flavor
It is a cracking fish to eat super fresh ! :)
Great video I love mackerel and sardines. Tight lines lozzfish
Thanks, lozzfish ! May the wind and tide be in your favour 👍🏼
Cool! But have you found my dive watch yet Tom??
Yooo, hello matey :) noo I haven't actually dived for it yet. Still have the marks on my plotter tho, it's in 16m. We could go take a look with the metal detectors when we get a calm day. Fancy it ? 😀
I would buy all the small mackerel and sardine for pike fishing baits! Awesome way of fishing!
Be welcome to some, can contact me via Instagram fh20_forager 👍🏼 cheers
😅😅😅😅😅😅😅👍👍👍👍👍
👍🏼🐟
Awesome Tom 😃
Cheers Alex
Definitely sustainable. A box or 2 a day. Artisinal fishery.
Cheers 🍻
Hi mate, I’m a commercial fisherman in St,Ives, I’ve been looking for one of those strippers for ages, if you want to sell it, please let me know
Hi matey, sorry your comment didn't show to me for a while.. just read it. Yeh no worries, not currently looking to sell it but can let you know if I do. Do you know what make it is ? might be handy for spare parts. Cheers
By the looks of it, it was a company called AFWFAB, he stopped making them years ago so I wouldn’t have thought you’d get any spare parts. Please do let me know if you ever want to part with it
@zacluvin76 ahhh yeh cool. Thanks for the information. You're welcome to first refusal on it if I sell it. Cheers
One handsome Mofo 😊
How's the fishing in Ozzy matey ?
Yeah you put video up ...way too short tho😅
Haha, some more vids soon dude :)
Also, nice to see you back. Looking forward to the tour of the new bits and bobs you've fitted. I have to say I am very jealous. Your own boat in my favourite part of the world. You are a very lucky man. All the best, till next time.
Thanks very much 👍🏼 aye, still have the hauler to fit back on, might see if can do that with the boat tour vid soon. Then some fishing again 😂 cheers matey
Nice to see you back mate hope you've got lots of footage of engine fitting etc looking forward to the next video and maybe some fishing later all the best
Nice one, cheers matey. Aye, will look to get a few more vids up soonish :) tight lines
how did you get into commercial fishing mate? im really interested in this channel. you seem like a great guy
Am commercial diver originally, we bought the boat to give scallop diving a go. The fishing goes hand in hand. Cheers
Hello mate, just saw your comment. Yeh, wanted to give diving for scallops a go. And always liked fishing 👍🏼
Any new videos planned bud. Hopefully she’s up and running now 👍🏻
Yes for sure, boat is currently stuck in a boat yard. Over a year, super slow. Hoping we get it back ASAP. Hopefully some more fishing vids in New year . Might have a diving one upcoming too
Back up and running :)
Hello mate how's the refit going looking forward to it love the old displacement boats
Hello mate, yes, refit is done. The new engine is in, and the other bits are all finally sorted. Took a long time, but we are there now. I'm still adjusting things and putting the boat in order, but only small stuff now :) Cheers. Will get a video of the refit items up at some point.
Well, I would hope the sound quality gets better. It's difficult to imagine it going in the other direction 😂 That said, good luck with your adventure. I advise you to let your audience know what led you to embark on it in the first place. It's a good place to begin.
Thanks for watching (and putting up with the sound 😂). Was tempted to take the early vids down but decided to leave them as part of the story. Aye, thanks for feedback too
Sound improving now pal ;)
Looking forward to seeing the finished refit mate 👍
You and me both! 😁 Thanks mate