Пікірлер

• 
  @MyLegacyLaserStudio6 күн бұрын

  I just had xtool d1 pro 20 W and I wasn’t happy with it. Now I’m saving up and I was thinking about doing the XT P2, which is pretty classy and allows for up to 9 feet of engraving material passed through it. Does this machine offer the same thing to threw the software, does it have rollers to let the material go through it and roll along to create a large piece or is does it just allow for the material to sit there for the workspace available to it?

• 
  @bosslasersКүн бұрын

  Some of our machine models offer 4 4-way passthrough which allows for an unlimited extended work area. Our work areas on our LS & HP Series machines range from 14" x 20" to 55" x 98" allowing versatility in materials and size.

• 
  @davidgruty15 күн бұрын

  What is the source of the laser? I understand it's not CO2

• 
  @bosslasers15 күн бұрын

  The FM series uses a fiber laser

• 
  @syris20016 күн бұрын

  On my wish list

• 
  @bosslasers4 күн бұрын

  Check out our site and add it to your cart for shipping costs too! bosslaser.com/series/fm-series/

• 
  @buenaventurasanchez531019 күн бұрын

  San po location nyu

• 
  @dantethewhitewolfАй бұрын

  how to say your lazy without saying your lazy. Create a video 10 years ago with detailed instructions and never update it even though you have changed the design of every piece discussed within this video -_- Starting to see why you are all not highly recommended.

• 
  @3starsfellАй бұрын

  power percentage?

• 
  @julieta203Ай бұрын

  so in other words laser printing

• 
  @ASIFALI-gp1beАй бұрын

  Thanks

• 
  @boobrowskyАй бұрын

  Any pricing range. Let's say one you used in video?

• 
  @bosslasersАй бұрын

  You can build a quote and order online using our website: bosslaser.com/fc-fusion-fiber-welder-cutter-cleaner/

• 
  @kriscadАй бұрын

  are these in stock???

• 
  @bosslasersАй бұрын

  These are currently on backorder, they will be available June 20th, if you'd like you can order online and be the first to receive when they're available. bosslaser.com/boss-vue-positioning-camera/

• 
  @adriangradinariu26 күн бұрын

  Do these come with the mounts to install them?

• 
  @swflscratcher58932 ай бұрын

  But what laser

• 
  @bosslasers2 ай бұрын

  This was done on our LS 2440 CO2 laser machine. Any of our LS series machines are capable of this job.

• 
  @paulsainti98792 ай бұрын

  Light trip hone ke bad machine ko vahin se kaise chalayen

• 
  @Brwnsvgentive232 ай бұрын

  How do I get rid of the lines ? Everytime I do a picture there are lines

• 
  @bosslasersАй бұрын

  Please reach out to our support team on our website to get assistance with your machine, using your free lifetime tech support: bosslaser.com/contact-us/

• 
  @muddyram2 ай бұрын

  Very nice, how much lol

• 
  @bosslasersКүн бұрын

  Currently starting at $34,997 and it includes training and installation!

• 
  @muddyramКүн бұрын

  @@bosslasers is install and training a new thing? Never got that with the LS units I have

• 
  @katfishu3 ай бұрын

  Will any new/updated set up tutorials be made? I tried using this tutorial for a recently purchased LS 2440 and it’s very confusing…

• 
  @taskagentzenith7893 ай бұрын

  HI, i have a Oculus quest 2 using oculink with a 5V DC 10W cable. how can I increase my PC's USB OUTPUT power as it is not providing the needed 10W

• 
  @ydkma2 ай бұрын

  i wish, the usb on a pc can only support up to 4.5 watts

• 
  @michellewhite80573 ай бұрын

  The bloopers 😂😂😂

• 
  @LiamC3283 ай бұрын

  Thank you, this is the one I was looking for. So it is Handle --> Bitmap Handle --> Get outline

• 
  @marichavez68793 ай бұрын

  Can you eat it?

• 
  @e3dusa4 ай бұрын

  How many LPI or what was your line spacing?

• 
  @arezou814 ай бұрын

  Settings?

• 
  @user-dr3er8vf4f4 ай бұрын

  That was satisfying😀

• 
  @ajfreeze2154 ай бұрын

  What lens??

• 
  @gracecostello10154 ай бұрын

  What’s an optimal light and velocity

• 
  @jacketpatches4 ай бұрын

  Hi there, would be nice to get a video of how to properly screw on the lense housing. I'm confused about the the screw that squeezes the spring. Does that have to be all the way down? Or just enough. Trying to understand how the auto focus works. Is it sending a signal to the material to see how far away the material is. Or is it sending a horizontal sense to the nozzle as it touches the material and raises up. I have a feeling the position of the spring tightening screw matters if the sensor is getting its focus readings by the way the nozzle moves up. And nozzle position is going to be different depending on where your collar is (the collar that tightens down the screw.) Hope I could make myself clear

• 
  @bosslasers4 ай бұрын

  The retaining nut that sits right above the spring will dictate how much the lens housing is sitting on the lens housing bracket. This is important because if it is set too low (retaining nut screw down onto the spring), when installing the lens housing back onto the lens housing bracket, the autofocus sensor (usually black, orange, or teal block) will also be triggered. If this happens, you won’t be able to move your worktable up because the machine thinks that it’s already touching the lens housing/nozzle. If it is set too high (retaining nut sitting above the spring; decompressed), when installing the lens housing back onto the lens housing bracket, the autofocus senor will never trigger, so in turn, when activating the autofocus feature, the worktable will continue to move up and run into the laser head assembly and can damage it. How the autofocus works is the worktable that has your material comes up towards the tip of the nozzle on the laser head assembly and compresses the lens housing, which then triggers the autofocus sensor that’s sitting behind the lens housing. Then moves the worktable down to the autofocus height that was set on your machine (previously set by our Laser Technicians in-house). This height is set by default that the focal lens that came with the machine

• 
  @dustinconfer41614 ай бұрын

  Just want to confirm, the HP-3655 is able to cut 18 GA Mild Steel Correct? I have seen a lot of back and forth between 16 GA, and 18 GA for this machine. Email says 16, this video shows 18.

• 
  @user-gj9up3tf1y4 ай бұрын

  Congrats, the first video I see someone use non mdf wood to build something like this. A good example since I don't have access to 3mm mdf to laser cut my Warhammer terrain.

• 
  @brianlitner63444 ай бұрын

  WOW That's impressive- plywood even! I'll take it LOL.

• 
  @hamitinan64224 ай бұрын

  Koca bir yalan. Düzgün ayarlandığında nerede ise servo gibi çalışabilir. Buna karşın oldukça ucuz bir maliyet sunar.

• 
  @theredbeardreport5 ай бұрын

  Funny how the company won’t tell us what laser is being used

• 
  @bemnetsileshi52225 ай бұрын

  What do you use to adhere the two parts?

• 
  @stew1tx5 ай бұрын

  How did you set it up to do that

• 
  @romulodonato85995 ай бұрын

  Hello, I am trying to contact you, however i cannot get an response, could you share some contact for online support, please.

• 
  @BradleyChetty6 ай бұрын

  Files not available

• 
  @atvu5986 ай бұрын

  the panel under the paper what do you call it?

• 
  @bosslasers6 ай бұрын

  That is called a Honeycomb Platform. It creates a stable surface for your material to sit on while your laser machine operates.

• 
  @tolstovDmitry6 ай бұрын

  Спасибо!

• 
  @rrmitch1237 ай бұрын

  Where can we get these files?

• 
  @aliebrahimi66387 ай бұрын

  May do all surface of brick? And test water absorption?😢

• 
  @bosslasers7 ай бұрын

  Yes, you can engrave on the surface of brick. The Laser Machine does not test for water absorption.

• 
  @JinanGoodCutCNCMachinery-ht6xg7 ай бұрын

  do you need supplier? we are Chinese CNC machine direct manufacturer. looking for cooperation with you

• 
  @LionTree7 ай бұрын

  Looks amazing!! How many kids does it cost?

• 
  @TylerHarney5 ай бұрын

  Starting at $49,997

• 
  @KBMiller137 ай бұрын

  Can you give details on the settings?

• 
  @bosslasers7 ай бұрын

  Our FC Department will be able to assist with that! If you go to bosslaser.com/contact-us/ you'll be able to contact them and get more information.

• 
  @shaneschuller25138 ай бұрын

  Nice 👍 Is this direct on glass without any solution?

• 
  @bosslasers8 ай бұрын

  Yes it is!

• 
  @JulyYunico8 ай бұрын

  This settings fixed my keyboard double clicking. My keyboard is getting too much power current to my cpu that's why it's double clicking

• 
  @bosslasers8 ай бұрын

  Glad we could help resolve your issue!

• 
  @mw3designs8 ай бұрын

  Are there any concerns with toxins when burning the foam? I have a case I’m working on, and cutting the foam on my CO2 would be optimal.

• 
  @user-xw4cy7zk5x9 ай бұрын

  doesnt the chiller need water????

• 
  @bosslasers9 ай бұрын

  Yes, that's what the inlet provides at the beginning of the video!

• 
  @Happybidr9 ай бұрын

  Put it on Santa’s list!

• 
  @HowYouCanMakeIt9 ай бұрын

  The LSR HYBRID - CNC & CO2 LASER ALL-IN-ONE is a fantastic machine.