Pro Tech Machinery here to bring you walk throughs, how to videos, machine demonstrations, install tips, reviews of important products, and much more. Like and subscribe to keep the content going!
The website that sold the trestle bed designs is gone? Bummer
@joeknowz48985 күн бұрын
yes.. pairing my cameras was/is ridiculous. I had a USB power supply for 3 years.. I did the panel puling and door seal hide and ran it along the head liner near the top of windshield..It was pretty well hid, I had a Garmin 66 W on the windshield and a Dash Cam Mini 2 on the back glass. Last month the 66 W was not shutting off like it did for 3 years , drained the suv's battery because I didn't day it for 3 days. I'm using the same power cord for the new Mini 2 on the windshield now but I ran the cable under the door sill to the rear seat passengers 12volt USB power supply. They are off when the ignition is off. While attempting to pair the new camera ..I had 4 cameras in "my devices" on my iPhone.. even after using "forget this device " over and over. I deleted the Garmin Drive app off my iPhone, shut it off for 5 minutes and then downloaded the app again. I still haven't paired the old Mini 2 and the new Mini 2 yet to my phone. I'm going to pair them with the other discounted from power.and don't try to ""NAME"" them like ( front or back ) that added another device to my phone..5 minute hook up and 30 minutes of upset trying to pair them....After every update too.......
@TomatitosSnakspizzaspostres6 күн бұрын
Same problem here. You saved my life
@protechmachinery12 күн бұрын
awesome! Glad we could help someone!
@jeffkimble885710 күн бұрын
Good video. Interesting you mention wanting your pipe perfectly level. I typically run my pipe with a bit of fall toward the drain/blow out. Since water condenses in the airline as the compressed air cools, it needs to have a way out. Putting some slant in the line lets the water run to the drain to be blown out.
@protechmachinery12 күн бұрын
I'm sure that can help. I haven't had any issues. Knock on wood... I haven't had any moisture in the line to speak of at all at any connection point. I have clear traps on all machines in our showroom and again, thankful I've never seen a drop of oil, debris, or water in any of the lines.
@BETTNmachine11 күн бұрын
Normal edge bander, Will u go to Atlanta exhibition?
@protechmachinery12 күн бұрын
Yes we will be in Atlanta for sure!
@BETTNmachine2 күн бұрын
@@protechmachinery1 this supplier is next to our factory
@dontblameme632822 күн бұрын
$500???!!!!! For just the RapidAir kit! Holy crap. This can be made with PEX for less than $140
@protechmachinery12 күн бұрын
It was probably half that price when we installed years ago in our showroom. But this is a hard aluminum pipe with all the fittings. Very high quality. Years later and still ZERO LEAKS! I'm very impressed. Also, they offer a flexible pipe option but it comes in coils and you straighten it yourself the best you can. I just really liked the solid straight pipe look and quality.
@user-eh3cc3yu7fАй бұрын
Great video on the VantEdge
@protechmachinery12 күн бұрын
Thanks!
@sabrinaseacrist5308Ай бұрын
You did not show how you actually fixed it, where the rod is supposed to go.
@protechmachinery12 күн бұрын
Sorry about that. All the rods match and look the same. It goes where the indent is for the rod to slide back into place. But you're right I should have shown more detail of getting that rod back into place.
@LiaLee-33Ай бұрын
Good
@LiaLee-33Ай бұрын
Good
@orcollins51Ай бұрын
Thanks for this video! A lifesaver. Had the same issue and was about to take to a repair shop after trying everything. Was able to get the push rod back in by rotating the cylinder with pull rope and using a screw driver to slightly pry up the lifter. Started on first pull. Would also like to know how this happens.
@protechmachinery12 күн бұрын
Great! Glad you got it fixed. Thankfully hasn't happened again but I bought a smaller unit for camping from Costco so haven't used this much and of course the power stopped going out after I purchased this and added a transfer switch to the exterior of the house.
@LiaLee-33Ай бұрын
Look great!I can provide a wide range vacuum pumps 、air compressor and accessories, also agent for major brand vacuum pumps at competitive price!(etc: Busch/Leybold/Becker/Edwards/Riestchle/Atlas Copco ...)
@LiaLee-33Ай бұрын
Look great!I can provide a wide range vacuum pumps 、air compressor and accessories, also agent for major brand vacuum pumps at competitive price!(etc: Busch/Leybold/Becker/Edwards/Riestchle/Atlas Copco ...)
@austinblevins3590Ай бұрын
What is the minimum width (mm) that a vane can be? Sorry, maybe I missed that.
@protechmachinery12 күн бұрын
Each model may be slightly different but should be listed in the manual that came with the pump. Let me know if you want the spec for this VTLF 2.25 and I can post it here!
@andriiprychepa7023Ай бұрын
useless video
@arielmaxx81262 ай бұрын
Hello friend, you don't know what I was looking for a channel that would be dedicated to showing and informing about machines since it is not something so common, I congratulate you for your work, I am a carpenter and I have a machine very similar to this generic Chinese brand the only thing What is not available is the cleaning spray, the rest of the groups are the same, I have that problem at the beginning with the glue applicator roller, my MDF board collides with the roller and the glue does not appear as if it were paint applied with a roller, which is noticeable. The hairs, this leaves it ready because it touches the board with the roller.. I will try this solution from the beginning by regulating that skate Another question, which do you think are the best brands of gluing machines HOMAG, SCM, Biesse, the one with the least problems, thank you friend and I congratulate you for the channel, keep it up.
@protechmachinery12 ай бұрын
I'll be posting a new video on the Hebrock Alrendorf F5 which I just recently installed in my showroom. It's been a very impressive machine thus far.
@jasonstanislaus53622 ай бұрын
Where do you get bits for your groover
@chicagolandcc3 ай бұрын
Great video on the VantEdge
@vanthien19523 ай бұрын
Auto tool length setter
@taylorlindsey49313 ай бұрын
Did this sell?
@protechmachinery12 күн бұрын
Yes this was an older machine and someone got a steal on a very clean and working machine! I have a machine I'm adding to inventory this week! Look for the next CNC Router video coming very soon.
@MukeshKumar-mq2ps3 ай бұрын
Hi. Sir. I need. H help please let me know what time works one. This. I need. Help thank you. This. Machine. Have. Problem
@jamalhoseiny24894 ай бұрын
hello sir i have a problem with osai controller can u help us please
@user-cs6ce8dc3q4 ай бұрын
Would that cause the motor to backfire with a popping sound when trying to crank
@draagsi33084 ай бұрын
What file format is that SD card? I bought a 256GB for my Dash Cam Mini 2, and it work read it..
@vanthien19524 ай бұрын
Can you make a video on how to operate the osai cnc?
@kenberger55434 ай бұрын
So mine is about 1 year old, only used once. Wouldn't start so I removed cover. Push rod in place. After replacing the cover, it started very next pull, go figure
@derekmelle5 ай бұрын
Is there an option for pusher/outfeed on the spectrum?
@protechmachinery14 ай бұрын
Absolutely. Not only is their an option but all our new models are future proof and come pre drilled and pre wired to accept our pusher sweeper AND automatic offload with conveyor table! You can add them at time of order OR you can add them in the future. Would you like to take a closer look via short zoom meeting? Shoot me an email today: [email protected]
@OBeezyNB5 ай бұрын
It would help if you showed how to fix it sir
@agarsha5 ай бұрын
Did you repair that pushrod yourself or take it in to dealer/shop?
@protechmachinery12 күн бұрын
I'm so sorry. Should have shown the process of actually fixing it in the video. I was so excited to find the problem I didn't think to include the actual fixing part. But it was fairly simple and straight forward to tell where it came from. Literally just pushed it back into place.
@JohnDoe-kk2vm5 ай бұрын
Thanks for this! I just got a Excitech I’m learning to use. Had this alarm. Did you ever finish videos on tool offsets setting Z?
@shadowrunner45266 ай бұрын
What is this machine used for ?
@protechmachinery16 ай бұрын
To apply a banding on the raw edge of a board.
@derrickmartinez9166 ай бұрын
whats the smallest length and depth of panel size to run , say walls fillers or toe skins?
@protechmachinery16 ай бұрын
Minimum panel length on this machine is 6.7" and minimum panel width is 3.54".
@derrickmartinez9166 ай бұрын
warranty?
@protechmachinery16 ай бұрын
Yes one year machine warranty. Email me [email protected] and I would be happy to reply with a quote with full specs.
@protechmachinery15 ай бұрын
Would you like to see this machine tomorrow?
@derrickmartinez9166 ай бұрын
how's the customer support?
@protechmachinery16 ай бұрын
Cantek offers great customer support but I also support all of my customers in additon to the manufacturers warranty.
@derrickmartinez9166 ай бұрын
cost?
@Vermaarts7866 ай бұрын
I need enroute can you share me
@dalee.goodwin39136 ай бұрын
Tonight, I was trying to do a test run on my portable backup generator: microwave versus computer! Who will win? And apparently the microwave won bc it made a sound that felt like a fuse could’ve blown
@noekeever26447 ай бұрын
Nice video! about greasing, The recommendation says the pump should be greased every 3,000 hours, but I've seen others doing it every month. What could happen if it was over-greased?
@protechmachinery16 ай бұрын
You could check with Becker but I believe too much of a good thing can be harmful. The grease would need to go somewhere. I've seen failures from greasing too much but they also ran out of the Becker specific grease then starting using off the shelf stuff and they were greasing constantly. (Not informed)
@samkaplitz90367 ай бұрын
We have the same issues! Nothing was helping.We will look at push rod.How could that happen?
@protechmachinery16 ай бұрын
If it's not doing anything and you have spark and fuel definitely check under that cover!!!
@Aleczanderm8 ай бұрын
How do you address a Motor Fault ( 0x 10) drive 5 (XB) teknic comm error? Also would love to see a video on squaring a multicam 3000
@protechmachinery18 ай бұрын
Usually on those servo motors they don't have an error code (no LCD screen) but most of them WILL give you a BLINK code. This can then be compared to a blink code service manual and should give you SOME additional info that may help point to a cause. From my experience if the motor is removed and under ZERO stress and the servo is still giving you a fault then the servo drive itself could be bad. You could try swapping some cables to eliminate a bad cable or bad motor. The 3000 MultiCam is rarely out of square as the homing procedure has a built in squaring procedure but if its too far out it will put the system under stress and cause faults. Next time I have a mutlicam with any similar issues I'll produce a video and get it uploaded! The procedure isn't terrible but does require loosening up the gantry to relieve the stress OR bring the bridge back into alignment. Then this usually means you'll need to adjust the tool change pick up locations.
@Aleczanderm8 ай бұрын
@@protechmachinery1 I got the error code i mentioned on my pendant, which locks up the machine and requires a hard restart
@protechmachinery17 ай бұрын
motor fault ..... my best guess would be a cable issue. They wear out and develop breaks over time. In my experience the cable is most often the issue versus a hardware failure in the motor OR servo drive but they do happen. What year is your machine? 2005?
@airbornearchitect70629 ай бұрын
wow cool cnc how much $$$$
@protechmachinery18 ай бұрын
sorry just saw this... this machine sold but we should have another one very soon!
@LuzMartinez-ch3ju9 ай бұрын
hi there i would like to know how can I get maintnance user manual for multicam router.
@protechmachinery18 ай бұрын
Check with MultiCam they should have user manuals available that usually cover a page or two of maintenance. If they can't help you shoot me an email and I can share an older on with you based on the model machine you have.
@irelmo69 Жыл бұрын
Great stuff! I hava a question... I have a pump that goes through vanes every 2-3 months due to blades exploding. I changed again this week and keep seeing grooves warn into them. I always clean it before installation and on occasion have had to get some caked on carbon off the inside of the pump. Why do they keep breaking?
@protechmachinery110 ай бұрын
Using any coolant mist for cutting aluminum? That will eat up vanes very quickly. How is your filter going to the pump? Clean?
@khanh9735 Жыл бұрын
Donga adapter will work with Mercedes ES 350 2013 ?
@timriddle1401 Жыл бұрын
Great video!
@protechmachinery1 Жыл бұрын
Glad you enjoyed it
@Lenexyandcamilaforever Жыл бұрын
Does it matter which one is line 1 lin line tool in line 3
@matthewvs9336 Жыл бұрын
Thanks so very much for this video. Helped alot!!! I was cutting cabinet doors and they were all 3/16" off on the Y axis and I was able to fix it. Thank you.
@protechmachinery1 Жыл бұрын
Fantastic! thanks for watching
@steinbierz Жыл бұрын
Curious what pressure you use when blowing dust out of these filters? Thanks.
@protechmachinery1 Жыл бұрын
no real measurement taking place on air gun trigger squeeze. I don't recall using full pressure. IF you damage the filter you'll just need to replace. Sorry I can't provide a more specific answer.
Пікірлер
What an amazing machine!
Website is dead
The website that sold the trestle bed designs is gone? Bummer
yes.. pairing my cameras was/is ridiculous. I had a USB power supply for 3 years.. I did the panel puling and door seal hide and ran it along the head liner near the top of windshield..It was pretty well hid, I had a Garmin 66 W on the windshield and a Dash Cam Mini 2 on the back glass. Last month the 66 W was not shutting off like it did for 3 years , drained the suv's battery because I didn't day it for 3 days. I'm using the same power cord for the new Mini 2 on the windshield now but I ran the cable under the door sill to the rear seat passengers 12volt USB power supply. They are off when the ignition is off. While attempting to pair the new camera ..I had 4 cameras in "my devices" on my iPhone.. even after using "forget this device " over and over. I deleted the Garmin Drive app off my iPhone, shut it off for 5 minutes and then downloaded the app again. I still haven't paired the old Mini 2 and the new Mini 2 yet to my phone. I'm going to pair them with the other discounted from power.and don't try to ""NAME"" them like ( front or back ) that added another device to my phone..5 minute hook up and 30 minutes of upset trying to pair them....After every update too.......
Same problem here. You saved my life
awesome! Glad we could help someone!
Good video. Interesting you mention wanting your pipe perfectly level. I typically run my pipe with a bit of fall toward the drain/blow out. Since water condenses in the airline as the compressed air cools, it needs to have a way out. Putting some slant in the line lets the water run to the drain to be blown out.
I'm sure that can help. I haven't had any issues. Knock on wood... I haven't had any moisture in the line to speak of at all at any connection point. I have clear traps on all machines in our showroom and again, thankful I've never seen a drop of oil, debris, or water in any of the lines.
Normal edge bander, Will u go to Atlanta exhibition?
Yes we will be in Atlanta for sure!
@@protechmachinery1 this supplier is next to our factory
$500???!!!!! For just the RapidAir kit! Holy crap. This can be made with PEX for less than $140
It was probably half that price when we installed years ago in our showroom. But this is a hard aluminum pipe with all the fittings. Very high quality. Years later and still ZERO LEAKS! I'm very impressed. Also, they offer a flexible pipe option but it comes in coils and you straighten it yourself the best you can. I just really liked the solid straight pipe look and quality.
Great video on the VantEdge
Thanks!
You did not show how you actually fixed it, where the rod is supposed to go.
Sorry about that. All the rods match and look the same. It goes where the indent is for the rod to slide back into place. But you're right I should have shown more detail of getting that rod back into place.
Good
Good
Thanks for this video! A lifesaver. Had the same issue and was about to take to a repair shop after trying everything. Was able to get the push rod back in by rotating the cylinder with pull rope and using a screw driver to slightly pry up the lifter. Started on first pull. Would also like to know how this happens.
Great! Glad you got it fixed. Thankfully hasn't happened again but I bought a smaller unit for camping from Costco so haven't used this much and of course the power stopped going out after I purchased this and added a transfer switch to the exterior of the house.
Look great!I can provide a wide range vacuum pumps 、air compressor and accessories, also agent for major brand vacuum pumps at competitive price!(etc: Busch/Leybold/Becker/Edwards/Riestchle/Atlas Copco ...)
Look great!I can provide a wide range vacuum pumps 、air compressor and accessories, also agent for major brand vacuum pumps at competitive price!(etc: Busch/Leybold/Becker/Edwards/Riestchle/Atlas Copco ...)
What is the minimum width (mm) that a vane can be? Sorry, maybe I missed that.
Each model may be slightly different but should be listed in the manual that came with the pump. Let me know if you want the spec for this VTLF 2.25 and I can post it here!
useless video
Hello friend, you don't know what I was looking for a channel that would be dedicated to showing and informing about machines since it is not something so common, I congratulate you for your work, I am a carpenter and I have a machine very similar to this generic Chinese brand the only thing What is not available is the cleaning spray, the rest of the groups are the same, I have that problem at the beginning with the glue applicator roller, my MDF board collides with the roller and the glue does not appear as if it were paint applied with a roller, which is noticeable. The hairs, this leaves it ready because it touches the board with the roller.. I will try this solution from the beginning by regulating that skate Another question, which do you think are the best brands of gluing machines HOMAG, SCM, Biesse, the one with the least problems, thank you friend and I congratulate you for the channel, keep it up.
I'll be posting a new video on the Hebrock Alrendorf F5 which I just recently installed in my showroom. It's been a very impressive machine thus far.
Where do you get bits for your groover
Great video on the VantEdge
Auto tool length setter
Did this sell?
Yes this was an older machine and someone got a steal on a very clean and working machine! I have a machine I'm adding to inventory this week! Look for the next CNC Router video coming very soon.
Hi. Sir. I need. H help please let me know what time works one. This. I need. Help thank you. This. Machine. Have. Problem
hello sir i have a problem with osai controller can u help us please
Would that cause the motor to backfire with a popping sound when trying to crank
What file format is that SD card? I bought a 256GB for my Dash Cam Mini 2, and it work read it..
Can you make a video on how to operate the osai cnc?
So mine is about 1 year old, only used once. Wouldn't start so I removed cover. Push rod in place. After replacing the cover, it started very next pull, go figure
Is there an option for pusher/outfeed on the spectrum?
Absolutely. Not only is their an option but all our new models are future proof and come pre drilled and pre wired to accept our pusher sweeper AND automatic offload with conveyor table! You can add them at time of order OR you can add them in the future. Would you like to take a closer look via short zoom meeting? Shoot me an email today: [email protected]
It would help if you showed how to fix it sir
Did you repair that pushrod yourself or take it in to dealer/shop?
I'm so sorry. Should have shown the process of actually fixing it in the video. I was so excited to find the problem I didn't think to include the actual fixing part. But it was fairly simple and straight forward to tell where it came from. Literally just pushed it back into place.
Thanks for this! I just got a Excitech I’m learning to use. Had this alarm. Did you ever finish videos on tool offsets setting Z?
What is this machine used for ?
To apply a banding on the raw edge of a board.
whats the smallest length and depth of panel size to run , say walls fillers or toe skins?
Minimum panel length on this machine is 6.7" and minimum panel width is 3.54".
warranty?
Yes one year machine warranty. Email me [email protected] and I would be happy to reply with a quote with full specs.
Would you like to see this machine tomorrow?
how's the customer support?
Cantek offers great customer support but I also support all of my customers in additon to the manufacturers warranty.
cost?
I need enroute can you share me
Tonight, I was trying to do a test run on my portable backup generator: microwave versus computer! Who will win? And apparently the microwave won bc it made a sound that felt like a fuse could’ve blown
Nice video! about greasing, The recommendation says the pump should be greased every 3,000 hours, but I've seen others doing it every month. What could happen if it was over-greased?
You could check with Becker but I believe too much of a good thing can be harmful. The grease would need to go somewhere. I've seen failures from greasing too much but they also ran out of the Becker specific grease then starting using off the shelf stuff and they were greasing constantly. (Not informed)
We have the same issues! Nothing was helping.We will look at push rod.How could that happen?
If it's not doing anything and you have spark and fuel definitely check under that cover!!!
How do you address a Motor Fault ( 0x 10) drive 5 (XB) teknic comm error? Also would love to see a video on squaring a multicam 3000
Usually on those servo motors they don't have an error code (no LCD screen) but most of them WILL give you a BLINK code. This can then be compared to a blink code service manual and should give you SOME additional info that may help point to a cause. From my experience if the motor is removed and under ZERO stress and the servo is still giving you a fault then the servo drive itself could be bad. You could try swapping some cables to eliminate a bad cable or bad motor. The 3000 MultiCam is rarely out of square as the homing procedure has a built in squaring procedure but if its too far out it will put the system under stress and cause faults. Next time I have a mutlicam with any similar issues I'll produce a video and get it uploaded! The procedure isn't terrible but does require loosening up the gantry to relieve the stress OR bring the bridge back into alignment. Then this usually means you'll need to adjust the tool change pick up locations.
@@protechmachinery1 I got the error code i mentioned on my pendant, which locks up the machine and requires a hard restart
motor fault ..... my best guess would be a cable issue. They wear out and develop breaks over time. In my experience the cable is most often the issue versus a hardware failure in the motor OR servo drive but they do happen. What year is your machine? 2005?
wow cool cnc how much $$$$
sorry just saw this... this machine sold but we should have another one very soon!
hi there i would like to know how can I get maintnance user manual for multicam router.
Check with MultiCam they should have user manuals available that usually cover a page or two of maintenance. If they can't help you shoot me an email and I can share an older on with you based on the model machine you have.
Great stuff! I hava a question... I have a pump that goes through vanes every 2-3 months due to blades exploding. I changed again this week and keep seeing grooves warn into them. I always clean it before installation and on occasion have had to get some caked on carbon off the inside of the pump. Why do they keep breaking?
Using any coolant mist for cutting aluminum? That will eat up vanes very quickly. How is your filter going to the pump? Clean?
Donga adapter will work with Mercedes ES 350 2013 ?
Great video!
Glad you enjoyed it
Does it matter which one is line 1 lin line tool in line 3
Thanks so very much for this video. Helped alot!!! I was cutting cabinet doors and they were all 3/16" off on the Y axis and I was able to fix it. Thank you.
Fantastic! thanks for watching
Curious what pressure you use when blowing dust out of these filters? Thanks.
no real measurement taking place on air gun trigger squeeze. I don't recall using full pressure. IF you damage the filter you'll just need to replace. Sorry I can't provide a more specific answer.
Wow impressive !