Can't wait to do this to highlight the "DOUGLAS" on all my tires!
@Randomguy-ld7rr5 ай бұрын
I don’t get do I just live oem tewtter unplugged?
@SurfingWithTheMartian5 ай бұрын
I bought the Sharpie paint pen but I found the tip difficult to work with so I took all 4 tires off and cut open the paint pen and put the paint in a small container and used a very fine tiny little artist paintbrush instead. Another guy in a different video suggested using white flex seal instead of the sharpie oil based paint to prevent cracks. I might use that for touch ups.
@Gone_Rogue3006 ай бұрын
I painted the trunk on my is300 and it's peeling! What's the best way to go about this? I can send you photos. Thanks!
@broza826 ай бұрын
I regret watching all this tutorial videos after I've painted mine. I didn't clean my tires at all before painting 😭 even though the tires are all brand new and never been used, I'm pretty sure they still need to be cleaned.
@gmane77 ай бұрын
I like this dude! N good tutorial mate
@genov23458 ай бұрын
What kind of carbon fiber wrap u use on the 350z roof
@G_Ozare9 ай бұрын
I've seen hundreds of wheel painting tutorials on here, this was one of the best. The only part I would suggest is not painting the inside of the conical faces where the lug nuts sit (just like the rear hub he masked off). I usually just throw some old lug nuts in the wheels to prevent painting them but you can always just go over them with acetone, etc.
@riceboxsupreme Жыл бұрын
I usually just leave the wheels mounted on the car and paint them in the rain at night time.
@alexbratu77 Жыл бұрын
Nice video!!! Wish you the best! I will do in the future a vlog like these painting my X5's rims!
@russellhills5454 Жыл бұрын
How many pens did it take to do all 4 tires?
@VillainGarageWorks Жыл бұрын
I think I used 2
@vernonkaris1524 Жыл бұрын
Did you clear coat them ty Vernon
@VillainGarageWorks Жыл бұрын
No, this is a single stage paint; no clear needed.
@billgates3699 Жыл бұрын
I’ve watched this video from beginning to end five-times. I still can’t understand what he’s saying. This guy is a Marklar. “I used the marklar but marklar turned out not to be as good as marklar so marklar looks great while marklar isn’t holding up so well so I’m glad I bought marklar because it turns out to be better than marklar despite the fact that marklar costs more than marklar.” When you refer to everything as “it” repeatedly and without defining the nouns, it’s called the “Pronoun Game”. Everybody loses. WTF is “it”? You keep saying “it it it”. “It” what? As in the Sharpie or the Dupli-color. The world will never know. Being unaware that one’s self is speaking in pronouns and not clearly defining subjects and nouns is a clear sign of low social intelligence. By this I mean autism.
@luisperez-xd5mo Жыл бұрын
Does the crossover needs power from the battery? Or how it gets the power?
@pavel514mtlQC Жыл бұрын
Looks different must try this :))
@sylvaingosselin1155 Жыл бұрын
I HAVE THE SAME RIMS THAT YOU HAVE AND WILL PANT THEM WHITE
@therealrealshocker Жыл бұрын
Nice video, thanks for sharing! 👍🏼
@lunaticleone8534 Жыл бұрын
I ended up not using the crossovers because the tweeters is where yhe power cam from, so in order for 6.5 to work the tweeters needed to be plugged in, and I didn't wanna take apart all the wiring and all the stuff to connect the base where it splits to the Amp and then that to the speakers sadly
@lunaticleone8534 Жыл бұрын
Literally didn't think anything to expect from you because everyone else did the power from an amp, but you did from factory thank the lord
@Bighotwheelhunter Жыл бұрын
Now I understand how to install it thank you
@eliseolopez9307 Жыл бұрын
For the rear do you reinstall the spring or delete it after installing the coilovers??
@VillainGarageWorks Жыл бұрын
Depends on the coilover kit. Some have the rear spring on strut (like these do) and some have it located in the factory spot. In the case of any spring on strut for the rear, you remove everything spring related on the rear.
@christineberardi4694 Жыл бұрын
I'm a 75 year-old grandmother with an 89 Pontiac Bonneville that I love especially the 6 cylinder 3800 ltr engine. Listened to you to get some education on saving my car. Unfortunately, dude, you said more F words that I can tolerate (and I really can tolerate some colorful language). Maybe you can learn to express yourself with better words ..."educate" yourself. Better yourself and don't use the Lord's name in vain EVER. Read the Bible No American with Christmas and Easter in the culture forever has an excuse for rejecting Jesus. It's later than you think.
@VillainGarageWorks Жыл бұрын
Glad I helped in some way :) Amazingly, I actually am "educated." Did pretty well growing up in private Christian schools actually, taught me to now allow society to dictate my speech or thoughts. As for using the Lords name in vain, I never have. I have never once asked for money using the Lord's name, then used that money for personal gain. We simply have a different view on that subject. BTW: Christmas and Easter were Pagan holidays first, the Church moved Jesus's birthdate and death date/raising period to attempt to cover up another religions holidays.
@JeriDro Жыл бұрын
How to fuck up your trunk in 5 minutes...
@jamesnorris3416 Жыл бұрын
Grout pen and clearcoat works the best
@adriancarter825 Жыл бұрын
Explain how you manage to blend that square in now
@alanpayne7656 Жыл бұрын
Very useful thanks. I was going to run the input straight from the woofer to the cross over. Still not sure if can do that or not??
@TBUDillenger2 жыл бұрын
For The Horde!
@Kman.2 жыл бұрын
It's a "Sharpie" by way of a BRAND, but is this an actual PAINT? I'm guessing these pens can be purchased where art supplies/school supplies are found, yes? I've got RAISED white lettering on my tires, & I would want a _SMOOOOOTH_ finish where it would come off as having been ROLLED on, not dabbed on where it's splotchy/bumpy/etc. Will that be the end result?
@ztyopa2 жыл бұрын
useful!
@paulrhoden44012 жыл бұрын
Really enjoyed your video. Thanks.
@califmike20032 жыл бұрын
Do you still use the crossover if you're hooking up an amp also?
@VillainGarageWorks2 жыл бұрын
Depends on the amp. If you use a 4 channel, no. You can control everything with the amp.
@joselrodriguezotero33282 жыл бұрын
Good job on the how to’ simple and efficient 👏🏾👏🏾
@Wrathchildss2 жыл бұрын
How do you tell which wires are the input wires are from the factory? Did they come out of the speaker? Did I miss that?
@VillainGarageWorks2 жыл бұрын
There is a plug, that goes into the factory speakers. Those are the input wires.
@Wrathchildss2 жыл бұрын
Awesome, thank you!
@alanpayne7656 Жыл бұрын
@@VillainGarageWorks are these the same wire that go into the factory tweeter before the capacitor?
@officialWWM2 жыл бұрын
I will add one more step. Get yourself a spray can of adhesion promoter or plastic primer and spray a couple of very light coats on before you start painting. It dries clear, so you don’t have to mask it. It will help the paint stick A LOT!
@mikesecondo22542 жыл бұрын
Paint pens are n/g no need to sand/grind your tires!! Just clean,use flex seal liquid and small brush.. been doing it for years..paint pens fade,crack...
@VillainGarageWorks2 жыл бұрын
Interesting, you can get a crap ton of it for less then 20 bucks. I'd have to give that one a try. On the point of paint pens fade and crack, that I have not experienced before. Mine lasted damn near the entire time I had a set of tires. Only reason I did touch ups were due to my dirt road and gravel driveway ripping off small pieces, not sure anything can hold up to that.
@renegadesway1532 жыл бұрын
Super helpful!! Was trying to figure out how im gonna bypass the original tweeter wire and this helped
@gilsondia2 жыл бұрын
Sick mate
@mattyoverweel44442 жыл бұрын
is it safe to use tyre shine on oil based paint lettering?
@damonolson22112 жыл бұрын
I have some harmony audio triaxel speakers and I’m trying to install them into an existing JBL speaker system. How would I do that and what parts would I need?
@Tuchh2 жыл бұрын
You are the only video after hours of looking on KZread Google everywhere that shows how to wire the crossover box haha, I knew tweeter and woofer but couldn't workout how to do the amp/in wiring, the factory wire was the answer... how did I not realise haha. Thanks
@starblazer642 жыл бұрын
I used a credit card in place of the squeegee and it worked okay for my truck but that might not be great for every application. Thanks for the sharing your knowledge
@jmstanza2 жыл бұрын
I’ll be attempting soon. Thanks for the know how!
@drin94362 жыл бұрын
what do you do with the original tweeter connector?
@AZGaming962 жыл бұрын
hey i got a question, i brought the universal carbon spoiler from apr performance, looks pretty much the same but the brackets are a bit smaller, would you still follow the same instructions as to what you have done, thank you
@VillainGarageWorks2 жыл бұрын
Yeah. The concept of the installation is still the same.
@AZGaming962 жыл бұрын
@@VillainGarageWorks wou;d you still suggest i use the hole saw an do what you've done? also a friend of mine has suggested that i use some square plated washers to aid more strength for the area the spoiler will be sitting on, would you agree? also have you had any issues with how you have done yours since the install?
@VillainGarageWorks2 жыл бұрын
@@AZGaming96 Hole saw is what I have and used for the hardware to clear and still keep everything decently clean. I'd suggest to use anything that does increase strength. Wouldn't hurt. Had zero issues from this point until I removed it, filled the holes and repainted the car about a year or so later.
@channeln84232 жыл бұрын
I saw a hard line in primer that would show in the paint
Пікірлер
Can't wait to do this to highlight the "DOUGLAS" on all my tires!
I don’t get do I just live oem tewtter unplugged?
I bought the Sharpie paint pen but I found the tip difficult to work with so I took all 4 tires off and cut open the paint pen and put the paint in a small container and used a very fine tiny little artist paintbrush instead. Another guy in a different video suggested using white flex seal instead of the sharpie oil based paint to prevent cracks. I might use that for touch ups.
I painted the trunk on my is300 and it's peeling! What's the best way to go about this? I can send you photos. Thanks!
I regret watching all this tutorial videos after I've painted mine. I didn't clean my tires at all before painting 😭 even though the tires are all brand new and never been used, I'm pretty sure they still need to be cleaned.
I like this dude! N good tutorial mate
What kind of carbon fiber wrap u use on the 350z roof
I've seen hundreds of wheel painting tutorials on here, this was one of the best. The only part I would suggest is not painting the inside of the conical faces where the lug nuts sit (just like the rear hub he masked off). I usually just throw some old lug nuts in the wheels to prevent painting them but you can always just go over them with acetone, etc.
I usually just leave the wheels mounted on the car and paint them in the rain at night time.
Nice video!!! Wish you the best! I will do in the future a vlog like these painting my X5's rims!
How many pens did it take to do all 4 tires?
I think I used 2
Did you clear coat them ty Vernon
No, this is a single stage paint; no clear needed.
I’ve watched this video from beginning to end five-times. I still can’t understand what he’s saying. This guy is a Marklar. “I used the marklar but marklar turned out not to be as good as marklar so marklar looks great while marklar isn’t holding up so well so I’m glad I bought marklar because it turns out to be better than marklar despite the fact that marklar costs more than marklar.” When you refer to everything as “it” repeatedly and without defining the nouns, it’s called the “Pronoun Game”. Everybody loses. WTF is “it”? You keep saying “it it it”. “It” what? As in the Sharpie or the Dupli-color. The world will never know. Being unaware that one’s self is speaking in pronouns and not clearly defining subjects and nouns is a clear sign of low social intelligence. By this I mean autism.
Does the crossover needs power from the battery? Or how it gets the power?
Looks different must try this :))
I HAVE THE SAME RIMS THAT YOU HAVE AND WILL PANT THEM WHITE
Nice video, thanks for sharing! 👍🏼
I ended up not using the crossovers because the tweeters is where yhe power cam from, so in order for 6.5 to work the tweeters needed to be plugged in, and I didn't wanna take apart all the wiring and all the stuff to connect the base where it splits to the Amp and then that to the speakers sadly
Literally didn't think anything to expect from you because everyone else did the power from an amp, but you did from factory thank the lord
Now I understand how to install it thank you
For the rear do you reinstall the spring or delete it after installing the coilovers??
Depends on the coilover kit. Some have the rear spring on strut (like these do) and some have it located in the factory spot. In the case of any spring on strut for the rear, you remove everything spring related on the rear.
I'm a 75 year-old grandmother with an 89 Pontiac Bonneville that I love especially the 6 cylinder 3800 ltr engine. Listened to you to get some education on saving my car. Unfortunately, dude, you said more F words that I can tolerate (and I really can tolerate some colorful language). Maybe you can learn to express yourself with better words ..."educate" yourself. Better yourself and don't use the Lord's name in vain EVER. Read the Bible No American with Christmas and Easter in the culture forever has an excuse for rejecting Jesus. It's later than you think.
Glad I helped in some way :) Amazingly, I actually am "educated." Did pretty well growing up in private Christian schools actually, taught me to now allow society to dictate my speech or thoughts. As for using the Lords name in vain, I never have. I have never once asked for money using the Lord's name, then used that money for personal gain. We simply have a different view on that subject. BTW: Christmas and Easter were Pagan holidays first, the Church moved Jesus's birthdate and death date/raising period to attempt to cover up another religions holidays.
How to fuck up your trunk in 5 minutes...
Grout pen and clearcoat works the best
Explain how you manage to blend that square in now
Very useful thanks. I was going to run the input straight from the woofer to the cross over. Still not sure if can do that or not??
For The Horde!
It's a "Sharpie" by way of a BRAND, but is this an actual PAINT? I'm guessing these pens can be purchased where art supplies/school supplies are found, yes? I've got RAISED white lettering on my tires, & I would want a _SMOOOOOTH_ finish where it would come off as having been ROLLED on, not dabbed on where it's splotchy/bumpy/etc. Will that be the end result?
useful!
Really enjoyed your video. Thanks.
Do you still use the crossover if you're hooking up an amp also?
Depends on the amp. If you use a 4 channel, no. You can control everything with the amp.
Good job on the how to’ simple and efficient 👏🏾👏🏾
How do you tell which wires are the input wires are from the factory? Did they come out of the speaker? Did I miss that?
There is a plug, that goes into the factory speakers. Those are the input wires.
Awesome, thank you!
@@VillainGarageWorks are these the same wire that go into the factory tweeter before the capacitor?
I will add one more step. Get yourself a spray can of adhesion promoter or plastic primer and spray a couple of very light coats on before you start painting. It dries clear, so you don’t have to mask it. It will help the paint stick A LOT!
Paint pens are n/g no need to sand/grind your tires!! Just clean,use flex seal liquid and small brush.. been doing it for years..paint pens fade,crack...
Interesting, you can get a crap ton of it for less then 20 bucks. I'd have to give that one a try. On the point of paint pens fade and crack, that I have not experienced before. Mine lasted damn near the entire time I had a set of tires. Only reason I did touch ups were due to my dirt road and gravel driveway ripping off small pieces, not sure anything can hold up to that.
Super helpful!! Was trying to figure out how im gonna bypass the original tweeter wire and this helped
Sick mate
is it safe to use tyre shine on oil based paint lettering?
I have some harmony audio triaxel speakers and I’m trying to install them into an existing JBL speaker system. How would I do that and what parts would I need?
You are the only video after hours of looking on KZread Google everywhere that shows how to wire the crossover box haha, I knew tweeter and woofer but couldn't workout how to do the amp/in wiring, the factory wire was the answer... how did I not realise haha. Thanks
I used a credit card in place of the squeegee and it worked okay for my truck but that might not be great for every application. Thanks for the sharing your knowledge
I’ll be attempting soon. Thanks for the know how!
what do you do with the original tweeter connector?
hey i got a question, i brought the universal carbon spoiler from apr performance, looks pretty much the same but the brackets are a bit smaller, would you still follow the same instructions as to what you have done, thank you
Yeah. The concept of the installation is still the same.
@@VillainGarageWorks wou;d you still suggest i use the hole saw an do what you've done? also a friend of mine has suggested that i use some square plated washers to aid more strength for the area the spoiler will be sitting on, would you agree? also have you had any issues with how you have done yours since the install?
@@AZGaming96 Hole saw is what I have and used for the hardware to clear and still keep everything decently clean. I'd suggest to use anything that does increase strength. Wouldn't hurt. Had zero issues from this point until I removed it, filled the holes and repainted the car about a year or so later.
I saw a hard line in primer that would show in the paint
So
This feels straight out of fast and furious 1
Thank you for your time, l Learn a lot 🙏
What color green is that
Thanks! Great info.