Absolutely love the look of that bike. I just picked up a really nice all original 1983 XJ750. But it was non-running. Sat in an old man's garage for years. Carbs all gummed up and brakes were toast. Rebuilt the carbs and brakes. Now she runs like new. I noticed you never capped off the intake nipples. I'm guessing you probably did after the video but just wanted to mention it in case you overlooked it. That would definitely make it lean and hard to tune.
@user-sc6to4yj8i8 ай бұрын
Cool,hi from Omsk
@christianstevens052110 ай бұрын
it wasn't even spinninh
@drawingwithmike526510 ай бұрын
Plugging the pods great tip I'll try on my seca 750 too!
@allstreetlab195410 ай бұрын
Let me know how you like it!
@user-tp2gw2og6g11 ай бұрын
Link for seat ?
@Scoobarruu Жыл бұрын
When that Subie grabbed 2nd gear 😮💨
@bboybreaker101 Жыл бұрын
Love those bars, is there a specific name for the style I can look up to find them?
@jacobgastelum2061 Жыл бұрын
Where can i find that frame? Pls
@allstreetlab1954 Жыл бұрын
The frame is custom, hand made.
@allstreetlab1954 Жыл бұрын
The hard tail section, not the whole bike.
@tobaccosun Жыл бұрын
What tank are you running? I just got an 82 and looking for tank options
@arrowshootkill1879 Жыл бұрын
What size is the smaller filter for the case
@PainterD54 Жыл бұрын
I owned one I got cheap and went thru the whole bike. The only part I didn't like was the fact that those engines need shims to adjust the valves, which is a real pain in the ass to adjust. Other than that, they are fun as hell to ride with plenty of power.
@fredfrancisco6840 Жыл бұрын
Luv the word classic lol good music 🎶
@Bdigital9482 Жыл бұрын
Why show an d rust bucket truck on the internet? The world is laughing at this garbage
@allstreetlab1954 Жыл бұрын
😂😂
@PrincessOPD_Utah Жыл бұрын
Vroom 🏎️
@PrincessOPD_Utah Жыл бұрын
Vroom 🏎️
@hectorsanchez5218 Жыл бұрын
If you ever want to you can swap out your swing arm extend it out with fat tire it'll also give you extra room to work with.. I new the bike motor had a problem.. Some good advice to no so you no you getting a good motor and bike.. is to watch front of motor and frame behind front rake... Watch for cracks, rust and loose exhaust.. If loose and muffler looks messed with skip buying it's sign of internal work and bad valve issues more then likely. But I'd think about swapping swing arm.. Also those motors are very inexpensive to replace get a swap for $600.
@Augcliffe Жыл бұрын
Hi, I'm from the future. You made the right choice!
@thunder6912 Жыл бұрын
looks DOPE bro !!!
@daturbo4life711 Жыл бұрын
Damn that STI took off! Build EJs are no joke 🚀
@allstreetlab1954 Жыл бұрын
Yeah the STI did well
@supramk4A80 Жыл бұрын
V tech kick in yo
@supramk4A80 Жыл бұрын
Midnight purple r34 with black rims
@supramk4A80 Жыл бұрын
Found it
@allstreetlab1954 Жыл бұрын
Glad you found what you’re looking for lol 😅
@supramk4A80 Жыл бұрын
@@allstreetlab1954 xD
@supramk4A80 Жыл бұрын
Weres the full video?
@allstreetlab1954 Жыл бұрын
It’s on the next short
@tirosavage3437 Жыл бұрын
No thanks looks boring
@allstreetlab1954 Жыл бұрын
I guess you’ll never know then
@faustinogarcia4736 Жыл бұрын
So who won 😮
@allstreetlab1954 Жыл бұрын
STI took the win! Evo owners can’t shift the cars to save their life 😂
@keenenhornby4162 жыл бұрын
Do you have a vid of the finished bike running
@MotoNaomi2 жыл бұрын
it’s a silvia s13 lmao
@waynedickett57802 жыл бұрын
How did you sink the carbs with out the bike running
@allstreetlab19542 жыл бұрын
Just did a bench sync. Syncing the throttle blades
@davidtindle69732 жыл бұрын
I didnt even think about restricting flow, I picked up a XJ750 Maxim that had pods and I just got a new air box haha
@davidtindle69732 жыл бұрын
Trash those pods and make a air box as close to the oem as you can, the battery box is in the way but it looks like theres room for a box. Awesome build man, Keep it goin!! My favorite bikes are the XJ series, the Secas are fun and the Maxim is such an awesome cruiser/sports bike. Im on my 2nd Maxim 750 right now
@beardedcatguitarplus94852 жыл бұрын
Great video man. I have the same exact bike I’ve been working on. Torn down to the frame now but hopefully it’ll be running soon. Have to patch a hole in the frame and get a replacement left side engine cover and the left circle cover with the stamped letters on it. I’m excited to see yours finally finished you’re doing great.
@boosasuresrex10162 жыл бұрын
Didn’t do a burn out
@stevehiggins29142 жыл бұрын
hi there> great looking bike. How did the pod filter trick work out?
@antlantis2 жыл бұрын
Sick
@allstreetlab19542 жыл бұрын
Thanks man!
@dylandestackelberg26952 жыл бұрын
Where’d you get the peg extensions?
@allstreetlab19542 жыл бұрын
It's a kit that I bought from TC BROS website.
@allstreetlab19542 жыл бұрын
FULL VIDEO: kzread.info/dash/bejne/k35kzpltqrGzYNY.html
@devyn6462 жыл бұрын
I want to put forward controls on my xj700. Where'd you get the linkages?
@allstreetlab19542 жыл бұрын
I bought a kit from TC BROS. It comes with the linkage but you have to cut it to size and assemble it aswell.
@ct75352 жыл бұрын
Link for exhaust?
@allstreetlab19542 жыл бұрын
I bought it on ebay a while back, if you search for Motorcycle exhaust tip you should find it.
@jakelong7812 жыл бұрын
I commented on the last video. Ignore the question I asked cuz you answered it in this video. May I ask though what jets your running? Great video. Bike is getting better and better!
@allstreetlab19542 жыл бұрын
I believe it's 126 main and a 45 pilot.
@jakelong7812 жыл бұрын
I have a 82 xj 750 maxim. Only thing left on the bike is the pod filters and trying to jet for them. The bike will idle and rev good. But coming just when you first blip the throttle, there is a stutter and then will rev after that. Maybe jets aren’t big enough, running 126 mains and 43 or 45 pilots can’t remember. Any suggestions? Your bike is coming out beautiful. Love the content. Good luck with the build!
@allstreetlab19542 жыл бұрын
Pod Filter Mod should help out
@allstreetlab19542 жыл бұрын
Thanks man!
@Ali-gd2jl2 жыл бұрын
Nice clean lbz . I got a 2007 lbz dually tow truck with 229.000 miles on it just recently purchased it its 2 months so far so good.
@allstreetlab19542 жыл бұрын
Yeah i love it. Never let me down on any road trip!
@bman22865 ай бұрын
Did you buy it cash or finance it?
@Ali-gd2jl2 жыл бұрын
Subscribed
@ezekielgavieres66282 жыл бұрын
Hey nice build! What size is that breather on the camshaft?
@allstreetlab19542 жыл бұрын
Thanks man! I appreciate it! It's 7/8th inch at the fitting I believe. You should subscribe to keep updated!
@deathtoming22012 жыл бұрын
Yeah maybe because your still in neutral 🥱🥴 that subie sounds fkn mean all it needs is some anti lag and then your words would change wouldn it
@allstreetlab19542 жыл бұрын
Anti lag will have the rods hanging out the motor
@styrex42612 жыл бұрын
@@allstreetlab1954 antilag isn’t hard on rods. it’s hard on the turbo and exhaust. not so much the internals unless boost is cranked way too high.
@allstreetlab19542 жыл бұрын
@@styrex4261 More maintenance than you can afford pal. Subaru
@styrex42612 жыл бұрын
@@allstreetlab1954 i have a wrx lool I think i know what I'm talking about
![I Bought An XJ750 Bobber. BIG MISTAKE!? [PART 2]](/img/d.gif)
Пікірлер
Please more videos on this beauty of a duramax
Thats a xv750
that is not an xj650
How would one fix this? I did this and It does vibrate the cap but doesn’t fall off
Having some blow by is normal, an engine rebuild is required when it becomes a problem.
Hola, me gustaría saber cómo puedo obtener esos posapies, podrías ayudarme???
Absolutely love the look of that bike. I just picked up a really nice all original 1983 XJ750. But it was non-running. Sat in an old man's garage for years. Carbs all gummed up and brakes were toast. Rebuilt the carbs and brakes. Now she runs like new. I noticed you never capped off the intake nipples. I'm guessing you probably did after the video but just wanted to mention it in case you overlooked it. That would definitely make it lean and hard to tune.
Cool,hi from Omsk
it wasn't even spinninh
Plugging the pods great tip I'll try on my seca 750 too!
Let me know how you like it!
Link for seat ?
When that Subie grabbed 2nd gear 😮💨
Love those bars, is there a specific name for the style I can look up to find them?
Where can i find that frame? Pls
The frame is custom, hand made.
The hard tail section, not the whole bike.
What tank are you running? I just got an 82 and looking for tank options
What size is the smaller filter for the case
I owned one I got cheap and went thru the whole bike. The only part I didn't like was the fact that those engines need shims to adjust the valves, which is a real pain in the ass to adjust. Other than that, they are fun as hell to ride with plenty of power.
Luv the word classic lol good music 🎶
Why show an d rust bucket truck on the internet? The world is laughing at this garbage
😂😂
Vroom 🏎️
Vroom 🏎️
If you ever want to you can swap out your swing arm extend it out with fat tire it'll also give you extra room to work with.. I new the bike motor had a problem.. Some good advice to no so you no you getting a good motor and bike.. is to watch front of motor and frame behind front rake... Watch for cracks, rust and loose exhaust.. If loose and muffler looks messed with skip buying it's sign of internal work and bad valve issues more then likely. But I'd think about swapping swing arm.. Also those motors are very inexpensive to replace get a swap for $600.
Hi, I'm from the future. You made the right choice!
looks DOPE bro !!!
Damn that STI took off! Build EJs are no joke 🚀
Yeah the STI did well
V tech kick in yo
Midnight purple r34 with black rims
Found it
Glad you found what you’re looking for lol 😅
@@allstreetlab1954 xD
Weres the full video?
It’s on the next short
No thanks looks boring
I guess you’ll never know then
So who won 😮
STI took the win! Evo owners can’t shift the cars to save their life 😂
Do you have a vid of the finished bike running
it’s a silvia s13 lmao
How did you sink the carbs with out the bike running
Just did a bench sync. Syncing the throttle blades
I didnt even think about restricting flow, I picked up a XJ750 Maxim that had pods and I just got a new air box haha
Trash those pods and make a air box as close to the oem as you can, the battery box is in the way but it looks like theres room for a box. Awesome build man, Keep it goin!! My favorite bikes are the XJ series, the Secas are fun and the Maxim is such an awesome cruiser/sports bike. Im on my 2nd Maxim 750 right now
Great video man. I have the same exact bike I’ve been working on. Torn down to the frame now but hopefully it’ll be running soon. Have to patch a hole in the frame and get a replacement left side engine cover and the left circle cover with the stamped letters on it. I’m excited to see yours finally finished you’re doing great.
Didn’t do a burn out
hi there> great looking bike. How did the pod filter trick work out?
Sick
Thanks man!
Where’d you get the peg extensions?
It's a kit that I bought from TC BROS website.
FULL VIDEO: kzread.info/dash/bejne/k35kzpltqrGzYNY.html
I want to put forward controls on my xj700. Where'd you get the linkages?
I bought a kit from TC BROS. It comes with the linkage but you have to cut it to size and assemble it aswell.
Link for exhaust?
I bought it on ebay a while back, if you search for Motorcycle exhaust tip you should find it.
I commented on the last video. Ignore the question I asked cuz you answered it in this video. May I ask though what jets your running? Great video. Bike is getting better and better!
I believe it's 126 main and a 45 pilot.
I have a 82 xj 750 maxim. Only thing left on the bike is the pod filters and trying to jet for them. The bike will idle and rev good. But coming just when you first blip the throttle, there is a stutter and then will rev after that. Maybe jets aren’t big enough, running 126 mains and 43 or 45 pilots can’t remember. Any suggestions? Your bike is coming out beautiful. Love the content. Good luck with the build!
Pod Filter Mod should help out
Thanks man!
Nice clean lbz . I got a 2007 lbz dually tow truck with 229.000 miles on it just recently purchased it its 2 months so far so good.
Yeah i love it. Never let me down on any road trip!
Did you buy it cash or finance it?
Subscribed
Hey nice build! What size is that breather on the camshaft?
Thanks man! I appreciate it! It's 7/8th inch at the fitting I believe. You should subscribe to keep updated!
Yeah maybe because your still in neutral 🥱🥴 that subie sounds fkn mean all it needs is some anti lag and then your words would change wouldn it
Anti lag will have the rods hanging out the motor
@@allstreetlab1954 antilag isn’t hard on rods. it’s hard on the turbo and exhaust. not so much the internals unless boost is cranked way too high.
@@styrex4261 More maintenance than you can afford pal. Subaru
@@allstreetlab1954 i have a wrx lool I think i know what I'm talking about
@Royal Creations 🤡🤡🤡
SUBSCRIBE!