I'm Ratarossa, I've been a automotive addict for 20 years now, I have tried to kick my habit but failed miserably so instead I created this KZread channel to justify purchasing cars (it's simply a mask for my car addiction)
Scott - I had wondered. Family is the most important thing and it’s brave to share. Looking forward to the BBI update and best of luck.
@matthapaq96184 сағат бұрын
Hi mate thanks for video 💪, Mate I have a tiny question for you,, three days ago me and my brother took his son Mazzi 2002 F1 gearbox and he modified it like crazy it has a 41 kms only still like new , anyway so we stop filling petrol , we start cat fantastic with no drama and my brother let it roll then he shift to 1 we want to take off it take of 1 meter then it won’t go on gears at all 🤦♂️🤷♂️,, We parked aside to see what happens, car won’t shift at all no sound for gear click as it should be it just stays on N” we turn it off then he try’s to start it unfortunately it won’t starts at all 🤦♂️ we check all kind fuses an relay nothing burned fuel pump is new ,, we put it on scanner it give us Code P1747: Reverse Gear Switch Absent ? Code P1746: Switch Stby , Absent !! Any idea what’s happening here ?? Many thanks Matt ☺️
@markscars10695 сағат бұрын
Sounds like you’ve been through it. Dropped off the channel for a while as the endless adverts (considering I’m a KZread Premium user) got very tedious. Don’t mind sponsor mentions. But cheap ‘kerching’ type mentions for tools and so on are not what I pay for. Yeah, awkward balancing act. Believe me, I know… Resubbed.
@qekelelemike46088 сағат бұрын
A key factor here is the relative slow following. Time to spread the word about this channel.
@anthonypicone18212 сағат бұрын
Need to reset the hvac , 348 ferrari 1991 , blower just stays on hi mode , can't control the speed at all, 1- is there a reset or 2- how to turn it off without removing the fuse ,
@workinprogress109816 сағат бұрын
Lol. Looking at the state of your front bumper, I needn't have worried about mine. I'd scrap the headlight wash. They are useless anyway. Good to see you back. 👍🏼
@realbogus18 сағат бұрын
I would use the washers... things get icky in the UK...
@kjhgliuguiugКүн бұрын
Good to see you back and hope you’re doing well! I wonder if your bins labeled ‘F40 build’ have anything to do with your upcoming project 😂
@marky9117Күн бұрын
Been watching for years and love the cars and content! Don’t want to kick a man when he’s down but why on earth would you not be buying your own home?! It’s the single biggest thing you can do for your families security. All of us petrolheads are addicted to cars but home and family have to come first. Cars are for when everything else is going nicely. Glad you’re navigating a way through your challenges but get a house bought before you mess about with anymore cars. Mislaid priorities. All the best going forward though and I look forward to what’s coming. 👍🏻
@EnglishManinPragueКүн бұрын
Hi I am so pleased you are finally working on your daily cars. I have been with you since the start of your KZread page (My channel names have changed a lot). Sorry to hear in previous videos you have had a difficult time of late. Best of luck going forward, glad you stuck with YT and did not get a normal job. Keep up the good work.
@sc1837Күн бұрын
Spotted the f40 build box and Wondered was that a subtle clue before you went out and said it in the end
@alman65812 күн бұрын
Great vlog - barely a Laufenn tyre in sight.
@alman65812 күн бұрын
Who needs headlight washers - LOSE THEM 🙂
@jamesduff36612 күн бұрын
Welcome back 🇮🇹 🏎️
@Stephano832 күн бұрын
Keep oem!!
@AdamForeman2 күн бұрын
If I was in charge of the projects, I'd be prioritising the Testarossa over EVERYTHING else. If you say that it's worth over £1 million pound in Spyder form, surely this is the best way to not only free up one the garage by selling a car, but freeing up cash to pay for the F40 project and more.
@peterechimi76462 күн бұрын
Keep it up ratta You know you’re flying the flag for us Ferrari enthusiasts they just can’t do what you’re doing so I appreciate your work
@lessayers86533 күн бұрын
I think that HID/Xenon headlights have to have washers installed. I think that it is legislated and will probably be an MOT fail if omitted. Maybe your regs are different To NI
@Kavster923 күн бұрын
I can't believe you didn't line up the center cap vertical axis with the star of the wheels. #asmr pain
@fullspectrum27523 күн бұрын
Keep
@anonymousonlineuser65433 күн бұрын
I dont think it is a good idea to repaint the car and then start fixing it.
@schwags19693 күн бұрын
The Car Wizard has one running on an aftermarket ECU, for the 308.
@schwags19693 күн бұрын
Well done sir, thrive through adversity.
@ajcarterfilms3 күн бұрын
1. That guard roller is a POS. It was painful just watching it not work. 2. Stick the baseball bat in at the back of the tyre, and gently drive the car forward. The tire will grab the bat and roll it over the top and to the front, rolling your guard along the way. You're welcome.
@Dr.Bigglesworth4 күн бұрын
Machine the front pins from the "extra" kit to shorten them so they work for the rear?
@andybarnes4374 күн бұрын
I thought that with xenon headlights it was an MOT failure if the washers didn't work. Not having them doesn't mean it's a pass. Not like removing a spare wheel with no tread and getting a pass. I could be wrong....
@durbansouthafrica30444 күн бұрын
I couldn't care less what you advertise.. as long as it keeps the channel going and puts more money in your pockets to continue to give us QUALITY content like you always do . I'd watch anything you put up on this channel . Those looking for a quick fix can easily find that on other channels but for pure ferrari content .. this is it right here!
@jwilson16594 күн бұрын
some glaziers sell lexan as it is an anti-vandal product, get thickness and take them a pattern, probably save you £4300 of that £4600!!!!😎
@sylvainsauvage83014 күн бұрын
Is it legal in UK to remove the pop-up washers on Xenon headlights installed from Factory? Not in Sweden at least!
@jimf51604 күн бұрын
i rolled the arches on my 914 back in the 90s with a baseball bat between the wheel and the arches... you squeeze in the bat and roll the car back and forth...
@bbarber68454 күн бұрын
Loose the pop ups
@sleepingwarrior46184 күн бұрын
If these tyres were made in 2016 and almost 8 years old...how can this car be your daily? A daily would go through a set of tyres on a drive axle in 8 months and on a Ferrari, driven moderately, it's less..... Is the Ferrari really a daily....or just rough?
@jamesdemuro59234 күн бұрын
That's so cute to have your little girl helping you in your project 😂
@vicar194 күн бұрын
Whats with the purple tinted glasses you absolute melt. Loose some weight too
@jamesdemuro59234 күн бұрын
I bet you spent your youth watching Miami Vice 🚘
@tompackage4 күн бұрын
I believe vehicles with xenon's have headlight washers as part of type appproval/legal requirement. Removing them may result in an MOT fail.
@organiccold4 күн бұрын
My Audi S4 has them but they don't work and never had issues in the MOT
@tompackage4 күн бұрын
@@organiccold headlamp washer & levelling systems are only required on vehicles with headlamps with a luminous intensity exceeding 2000 lumens.
@the5th20004 күн бұрын
Are the xenon washers not a legal requirement?
@AMG8554 күн бұрын
Loose the holes. Never used mine.
@geoffaries4 күн бұрын
I must have been lucky with my 2004 Ferrari 360, it had regular servicing whether it needed it or not😅 it never broke down in the 7 years that had it, it was manual coupe, i budgeted for £3k per year, but didn't spend £21k on servicing and replacements. I mainly used the Ferrari specialist indies😊
@bazpatto4 күн бұрын
Loose the pop ups mate, smooth look is way better
@birgerg4 күн бұрын
I thought headlight washers was mandatory for xenon headlights.. Will fail MOT without.
@911marcus4 күн бұрын
Nooooo, wie didnt See the F40😂
@malcholden53574 күн бұрын
Don’t bother with the headlight washers. Scott, does that rear under tray normally come away with the bumper?
@AndrewKay-fg1bj4 күн бұрын
3:07 oof, that car cover has seen better days..
@paulkingeu5 күн бұрын
lose the squirters
@jacksunville5 күн бұрын
Struggles or not you have a sick life. Can’t wait for the future of the channel
@dennismassey32595 күн бұрын
Loose the washers, clean lines is the way to go.
@lincolnpinkoln3595 күн бұрын
Was there any structual stregnthening needed?
@peglegmotoring5 күн бұрын
I notice the Laufenn tyres have been swapped for Michelins lol. Saves a trip into a ditch when the roads get greasy
Пікірлер
Scott - I had wondered. Family is the most important thing and it’s brave to share. Looking forward to the BBI update and best of luck.
Hi mate thanks for video 💪, Mate I have a tiny question for you,, three days ago me and my brother took his son Mazzi 2002 F1 gearbox and he modified it like crazy it has a 41 kms only still like new , anyway so we stop filling petrol , we start cat fantastic with no drama and my brother let it roll then he shift to 1 we want to take off it take of 1 meter then it won’t go on gears at all 🤦♂️🤷♂️,, We parked aside to see what happens, car won’t shift at all no sound for gear click as it should be it just stays on N” we turn it off then he try’s to start it unfortunately it won’t starts at all 🤦♂️ we check all kind fuses an relay nothing burned fuel pump is new ,, we put it on scanner it give us Code P1747: Reverse Gear Switch Absent ? Code P1746: Switch Stby , Absent !! Any idea what’s happening here ?? Many thanks Matt ☺️
Sounds like you’ve been through it. Dropped off the channel for a while as the endless adverts (considering I’m a KZread Premium user) got very tedious. Don’t mind sponsor mentions. But cheap ‘kerching’ type mentions for tools and so on are not what I pay for. Yeah, awkward balancing act. Believe me, I know… Resubbed.
A key factor here is the relative slow following. Time to spread the word about this channel.
Need to reset the hvac , 348 ferrari 1991 , blower just stays on hi mode , can't control the speed at all, 1- is there a reset or 2- how to turn it off without removing the fuse ,
Lol. Looking at the state of your front bumper, I needn't have worried about mine. I'd scrap the headlight wash. They are useless anyway. Good to see you back. 👍🏼
I would use the washers... things get icky in the UK...
Good to see you back and hope you’re doing well! I wonder if your bins labeled ‘F40 build’ have anything to do with your upcoming project 😂
Been watching for years and love the cars and content! Don’t want to kick a man when he’s down but why on earth would you not be buying your own home?! It’s the single biggest thing you can do for your families security. All of us petrolheads are addicted to cars but home and family have to come first. Cars are for when everything else is going nicely. Glad you’re navigating a way through your challenges but get a house bought before you mess about with anymore cars. Mislaid priorities. All the best going forward though and I look forward to what’s coming. 👍🏻
Hi I am so pleased you are finally working on your daily cars. I have been with you since the start of your KZread page (My channel names have changed a lot). Sorry to hear in previous videos you have had a difficult time of late. Best of luck going forward, glad you stuck with YT and did not get a normal job. Keep up the good work.
Spotted the f40 build box and Wondered was that a subtle clue before you went out and said it in the end
Great vlog - barely a Laufenn tyre in sight.
Who needs headlight washers - LOSE THEM 🙂
Welcome back 🇮🇹 🏎️
Keep oem!!
If I was in charge of the projects, I'd be prioritising the Testarossa over EVERYTHING else. If you say that it's worth over £1 million pound in Spyder form, surely this is the best way to not only free up one the garage by selling a car, but freeing up cash to pay for the F40 project and more.
Keep it up ratta You know you’re flying the flag for us Ferrari enthusiasts they just can’t do what you’re doing so I appreciate your work
I think that HID/Xenon headlights have to have washers installed. I think that it is legislated and will probably be an MOT fail if omitted. Maybe your regs are different To NI
I can't believe you didn't line up the center cap vertical axis with the star of the wheels. #asmr pain
Keep
I dont think it is a good idea to repaint the car and then start fixing it.
The Car Wizard has one running on an aftermarket ECU, for the 308.
Well done sir, thrive through adversity.
1. That guard roller is a POS. It was painful just watching it not work. 2. Stick the baseball bat in at the back of the tyre, and gently drive the car forward. The tire will grab the bat and roll it over the top and to the front, rolling your guard along the way. You're welcome.
Machine the front pins from the "extra" kit to shorten them so they work for the rear?
I thought that with xenon headlights it was an MOT failure if the washers didn't work. Not having them doesn't mean it's a pass. Not like removing a spare wheel with no tread and getting a pass. I could be wrong....
I couldn't care less what you advertise.. as long as it keeps the channel going and puts more money in your pockets to continue to give us QUALITY content like you always do . I'd watch anything you put up on this channel . Those looking for a quick fix can easily find that on other channels but for pure ferrari content .. this is it right here!
some glaziers sell lexan as it is an anti-vandal product, get thickness and take them a pattern, probably save you £4300 of that £4600!!!!😎
Is it legal in UK to remove the pop-up washers on Xenon headlights installed from Factory? Not in Sweden at least!
i rolled the arches on my 914 back in the 90s with a baseball bat between the wheel and the arches... you squeeze in the bat and roll the car back and forth...
Loose the pop ups
If these tyres were made in 2016 and almost 8 years old...how can this car be your daily? A daily would go through a set of tyres on a drive axle in 8 months and on a Ferrari, driven moderately, it's less..... Is the Ferrari really a daily....or just rough?
That's so cute to have your little girl helping you in your project 😂
Whats with the purple tinted glasses you absolute melt. Loose some weight too
I bet you spent your youth watching Miami Vice 🚘
I believe vehicles with xenon's have headlight washers as part of type appproval/legal requirement. Removing them may result in an MOT fail.
My Audi S4 has them but they don't work and never had issues in the MOT
@@organiccold headlamp washer & levelling systems are only required on vehicles with headlamps with a luminous intensity exceeding 2000 lumens.
Are the xenon washers not a legal requirement?
Loose the holes. Never used mine.
I must have been lucky with my 2004 Ferrari 360, it had regular servicing whether it needed it or not😅 it never broke down in the 7 years that had it, it was manual coupe, i budgeted for £3k per year, but didn't spend £21k on servicing and replacements. I mainly used the Ferrari specialist indies😊
Loose the pop ups mate, smooth look is way better
I thought headlight washers was mandatory for xenon headlights.. Will fail MOT without.
Nooooo, wie didnt See the F40😂
Don’t bother with the headlight washers. Scott, does that rear under tray normally come away with the bumper?
3:07 oof, that car cover has seen better days..
lose the squirters
Struggles or not you have a sick life. Can’t wait for the future of the channel
Loose the washers, clean lines is the way to go.
Was there any structual stregnthening needed?
I notice the Laufenn tyres have been swapped for Michelins lol. Saves a trip into a ditch when the roads get greasy
Laufenn = ditch finders