I had this problem as well, called out an engineer. He immediately diagnosed a split lower rotating arm, the big grey plastic arm the smaller green arm spins on. The split was spraying water sideways, directly at the seals causing them to leak. It was such a narrow slot along the join between the upper and lower arm moldings and wasn't noticeable at a quick glance. He took the front lower panel off and drained the pooled water off with a towel, which cleared the Aquastop. Must be a common fault because he had brought the part along with him and it was the first thing he looked at. I've got to laugh, I'm having all the same problems with my SMEG dishwasher as you! I think the next time the small green arm goes, I'll replace the lower grey arm at the same time. That is, if the dishwasher lasts another 5 years!
@gazm2k55 ай бұрын
Thanks I love you
@petert89315 ай бұрын
Just wanted to say, thank you! This video helped me and got my SMEG working + that useful warning about that fragile tab. I'll save up and budget in for an eventual replacement. Thanks x2
@user-lp7gr9eu7n6 ай бұрын
Take the bottom arm out, just pulls out. Then the spinning arm screws into the nut in the arm. Don’t bang it. It’s easy once you realise that the arm has a screw connection.
@cheljace7 ай бұрын
4:59 thx for sharing this video, I was able to fix my dishwasher. Much appreciated 😊
@bekkavalley11517 ай бұрын
ta mate. even though it appesrs you shot the vid on a heirloom potato, I was able to solve the same issue. not anywhere as much water as you must've had. 2nd time in 8 years, last time it just magically solved itself but it'd been 2 days so glad I sussed out the cause. appreciated.
@abed0519808 ай бұрын
This one is an Indesit IWME127 Integrated Washing Machine
@johnnyweep598 ай бұрын
Mine started having a burning smell,took half the load out cleaned the filters switched on and so far seems fine..possible overloading issue?
@weeniemakesstuff57595 ай бұрын
Same happened to me right now. Did it happen again?
@user-xc5ld2gr3b8 ай бұрын
There was smoke filling the drum & pouring out of mine last night. The smoke & smell of toxic burning filled the house & ruined the clothes, we had to unplug it and leave it out on the patio.
@Max_Ufc Жыл бұрын
Its the capacitor motor i fixed mine myself i have the same model its a 7UF capacitor motor you need
@appliancesandstuffmisbehav197411 ай бұрын
thanks for the update
@hotpointbrownlover3365 Жыл бұрын
this one is an indesit iwme126
@user-eu5sr1es1o Жыл бұрын
Hotpoint/Indesit
@appliancesandstuffmisbehav1974 Жыл бұрын
Or if you cannot be bothered just get a new dishwasher: "www.amazon.co.uk/s?k=new+dishwasher&ref=nb_sb_noss_1&_encoding=UTF8&tag=stellarbridge-21&linkCode=ur2&linkId=5f98f4da7b40c40aea2dd245c9c55e1a&camp=1634&creative=6738"
@appliancesandstuffmisbehav1974 Жыл бұрын
Use these kirkland paper towels: www.amazon.co.uk/Kirkland-Signature-Roll-Towel-Sheet/dp/B00TK3DKY6/ref=sr_1_5?crid=3TL5UIO68IUPY&keywords=kirkland+paper+towels+kitchen+roll&qid=1687981603&sprefix=kirkland+paper%252Caps%252C91&sr=8-5&_encoding=UTF8&tag=stellarbridge-21&linkCode=ur2&linkId=0dd6b9eaa21eda905553a8a101d15a64&camp=1634&creative=6738"
@simonwiltshire8941 Жыл бұрын
What the link so we buy right one,thanks
@appliancesandstuffmisbehav197411 ай бұрын
7UF capacitor
@remomilani5862 Жыл бұрын
Grazie
@stephenjoseph1244 Жыл бұрын
It is the capacitor for the motor, you need to use a 7 micro farad capacitor, its not easy if you have not tried it but my advice is to call a candy engineer or get it insured and then call them out if you feel the call out fees is high and then you can pay as small installments
@Andrew-gd5jp Жыл бұрын
Mine does the same…😢
@kirby1282 Жыл бұрын
Same! What to do?
@johnworf Жыл бұрын
If you look at the other comments - an engineer suggests buying a device off youtube fir about £5 that should fix the problem.
@laurenwitham8000 Жыл бұрын
My machine is doing the same but it isn't showing the number 1 when I turn it on. What was the problem please? Did you fix it?
@appliancesandstuffmisbehav1974 Жыл бұрын
went to the tip in the end and we stopped using a dryer
@maggieoneill8755 Жыл бұрын
I've had that same problem this morning drum won't turn burning smell and the element and the back was glowing I've booked domestic and general to have a look at it I'm hoping they condem it as its been nothing but bother from the start
@kirby1282 Жыл бұрын
What was the outcome?
@JonathanGrainger1975 Жыл бұрын
same problem.. seems like a common fault given the comments!
@yiberarias937 Жыл бұрын
You cleaned the water and done? I ve lost my time
@appliancesandstuffmisbehav1974 Жыл бұрын
yes just soak up the water with a kitchen towel and it will start again.
@bencahill1094 Жыл бұрын
Great stuff, got it sorted based on your video. 👌
@appliancesandstuffmisbehav1974 Жыл бұрын
Thanks
@JessJourneaux2 жыл бұрын
Did you manage to fix it? I have the same problem now
@BinanceStuff2 жыл бұрын
I didn't repair it...not had time...it should just be a £5 capacitor replacement though that you can get off ebay.
@johnworf Жыл бұрын
i ended up chucking it because i moved house...i think i could have fixed it with a £5 replacement part of youtube...check the rest of the comments that an engineer made.
@hotpointbrownlover33652 жыл бұрын
what happened to the other one
@charliesworld9806 Жыл бұрын
Yes a very easy repair problematic on candy/hoover dryer normally after 18 months onwards done hundreds
@hotpointbrownlover33652 жыл бұрын
you have to take the drum out to repair this one
@charliesworld9806 Жыл бұрын
You can easily replace the capacitor by removing the fan cover bottom l right hand side . Then twist the fan cowling ,remove the fan and access the 13 mm nut on the capacitor. Reach in remove the 2 wires on the capacitor and reverse the process 10 minute job . 30 years time served whitegoods engineer
@simonwiltshire8941 Жыл бұрын
This on the back off the tumble dryer?
@chidori0905 ай бұрын
@@charliesworld9806very late reply but I had this problem with this exact machine. This comment worked perfectly for me! Thank you sir you are a gentle man and a scholar. You saved a lot of money being paid out
@appliancesandstuffmisbehav19742 жыл бұрын
Update - I bought the right locking nut and it snapped on perfectly...My dishwasher now works properly again! Hoorah!
@groovyshrubbery Жыл бұрын
Hi, same stuff with ours, do you have a link on where you bought the right part ?
@appliancesandstuffmisbehav1974 Жыл бұрын
@@groovyshrubbery SMEG Spares
@skiBumJ2 жыл бұрын
Did the issue come back after you cleared the fault? Wondering whether you had a persistent leak.
@BinanceStuff2 жыл бұрын
it came back every now and then... but i got another 2 years out of it.
@skiBumJ2 жыл бұрын
@@BinanceStuff seems like you had a slow leak that needed plugging?
@BinanceStuff2 жыл бұрын
@@skiBumJ it would be dry and then suddenly full of water... so it wasnt a slow persistant leak
@skiBumJ2 жыл бұрын
@@BinanceStuff how many times did that happen over the two years (roughly)?
@BinanceStuff2 жыл бұрын
@@skiBumJ 6 say...but it literally took 20 seconds to sought out once i'd done it a couple of times. I'd avoid smeg - the one i've bought now the arm keeps flying off it!
@tyralegge81242 жыл бұрын
Hello hope you are well.. I have this exact problem and wondered if you have managed to get an answer from anyone on what to do. Thanks
@appliancesandstuffmisbehav19742 жыл бұрын
Sort of got somewhere with it - i just haven't phoned them up! [email protected] My serial number is 50701 06921 on my dishwasher The locking nut on the green arm is number: 82733 on the pdf diagram that the spares department sent to me. This is their email they sent back to me: Good afternoon, Thank you for confirming. The part number for this item is 760570371 and the total price including the VAT and delivery is £7.39. We have the part in stock and would quote approximately 2-3 working days for delivery. If you would like to place an order please call our spares team on 0330 094 7779 (option 2)
@appliancesandstuffmisbehav19742 жыл бұрын
Problem solved - £7.35 for a new locking nut and it worked - I honestly cannot see the difference between the old one and the new one but clearly it now works!
@tyralegge81242 жыл бұрын
@@appliancesandstuffmisbehav1974 I had to buy both parts and I spent £24 and it seems to be working now thank you. The other problem I have is sometimes the tablet does not leave the table compartment. It opens but the tablet just sits there :(
@johnworf2 жыл бұрын
@@tyralegge8124 don't bother with the compartment.... just throw it in the bottom.
@Andrew-gd5jp Жыл бұрын
@@tyralegge8124 I use powder and it all gets washed out cleanly. I am wondering if just putting the tablet in the compartment would just waste the tablet on the pre-rinse cycle with nothing left for the longer hot wash phase - that’s why there’s a compartment for it…?
@charliesworld98062 жыл бұрын
Capacitor needs replacement
@appliancesandstuffmisbehav19742 жыл бұрын
how easy is that to do and where do i get one for my machine? Also how do you know for sure it is capacitor?
@charliesworld98062 жыл бұрын
@@appliancesandstuffmisbehav1974 💯 sour normally 8uf capacitor normally on ebay or Amazon . I’ve been a whitegoods engineer for over 30 years and replaced 100 of on these machines .
@charliesworld98062 жыл бұрын
Hopefully this link might help I can do this with my eyes closed but trying to explain is a different matter
@johnworf2 жыл бұрын
@@charliesworld9806 cheers mate... ill try and see if i can fix it myself then.
@appliancesandstuffmisbehav19742 жыл бұрын
@@charliesworld9806 i think you might have forgotten to put a link in....i looked up the capacitor and there seems to be a lot on there - are they specific - or is it for any machine...thanks for your help - can't wait to get some spare time to tackle this...and show the wife a thing or two - lol!!! the last dryer i tried to fix fell apart lol.
@appliancesandstuffmisbehav19742 жыл бұрын
Help - How does the green spinner fit snugly on the lower arm - I've checked the internet and loads of other people seem to be having exactly the same problem - this is ridiculous. E-spares please help me out?
Пікірлер
Get a Samsung dryer
Never buy a candy dryer again
I had this problem as well, called out an engineer. He immediately diagnosed a split lower rotating arm, the big grey plastic arm the smaller green arm spins on. The split was spraying water sideways, directly at the seals causing them to leak. It was such a narrow slot along the join between the upper and lower arm moldings and wasn't noticeable at a quick glance. He took the front lower panel off and drained the pooled water off with a towel, which cleared the Aquastop. Must be a common fault because he had brought the part along with him and it was the first thing he looked at. I've got to laugh, I'm having all the same problems with my SMEG dishwasher as you! I think the next time the small green arm goes, I'll replace the lower grey arm at the same time. That is, if the dishwasher lasts another 5 years!
Thanks I love you
Just wanted to say, thank you! This video helped me and got my SMEG working + that useful warning about that fragile tab. I'll save up and budget in for an eventual replacement. Thanks x2
Take the bottom arm out, just pulls out. Then the spinning arm screws into the nut in the arm. Don’t bang it. It’s easy once you realise that the arm has a screw connection.
4:59 thx for sharing this video, I was able to fix my dishwasher. Much appreciated 😊
ta mate. even though it appesrs you shot the vid on a heirloom potato, I was able to solve the same issue. not anywhere as much water as you must've had. 2nd time in 8 years, last time it just magically solved itself but it'd been 2 days so glad I sussed out the cause. appreciated.
This one is an Indesit IWME127 Integrated Washing Machine
Mine started having a burning smell,took half the load out cleaned the filters switched on and so far seems fine..possible overloading issue?
Same happened to me right now. Did it happen again?
There was smoke filling the drum & pouring out of mine last night. The smoke & smell of toxic burning filled the house & ruined the clothes, we had to unplug it and leave it out on the patio.
Its the capacitor motor i fixed mine myself i have the same model its a 7UF capacitor motor you need
thanks for the update
this one is an indesit iwme126
Hotpoint/Indesit
Or if you cannot be bothered just get a new dishwasher: "www.amazon.co.uk/s?k=new+dishwasher&ref=nb_sb_noss_1&_encoding=UTF8&tag=stellarbridge-21&linkCode=ur2&linkId=5f98f4da7b40c40aea2dd245c9c55e1a&camp=1634&creative=6738"
Use these kirkland paper towels: www.amazon.co.uk/Kirkland-Signature-Roll-Towel-Sheet/dp/B00TK3DKY6/ref=sr_1_5?crid=3TL5UIO68IUPY&keywords=kirkland+paper+towels+kitchen+roll&qid=1687981603&sprefix=kirkland+paper%252Caps%252C91&sr=8-5&_encoding=UTF8&tag=stellarbridge-21&linkCode=ur2&linkId=0dd6b9eaa21eda905553a8a101d15a64&camp=1634&creative=6738"
What the link so we buy right one,thanks
7UF capacitor
Grazie
It is the capacitor for the motor, you need to use a 7 micro farad capacitor, its not easy if you have not tried it but my advice is to call a candy engineer or get it insured and then call them out if you feel the call out fees is high and then you can pay as small installments
Mine does the same…😢
Same! What to do?
If you look at the other comments - an engineer suggests buying a device off youtube fir about £5 that should fix the problem.
My machine is doing the same but it isn't showing the number 1 when I turn it on. What was the problem please? Did you fix it?
went to the tip in the end and we stopped using a dryer
I've had that same problem this morning drum won't turn burning smell and the element and the back was glowing I've booked domestic and general to have a look at it I'm hoping they condem it as its been nothing but bother from the start
What was the outcome?
same problem.. seems like a common fault given the comments!
You cleaned the water and done? I ve lost my time
yes just soak up the water with a kitchen towel and it will start again.
Great stuff, got it sorted based on your video. 👌
Thanks
Did you manage to fix it? I have the same problem now
I didn't repair it...not had time...it should just be a £5 capacitor replacement though that you can get off ebay.
i ended up chucking it because i moved house...i think i could have fixed it with a £5 replacement part of youtube...check the rest of the comments that an engineer made.
what happened to the other one
Yes a very easy repair problematic on candy/hoover dryer normally after 18 months onwards done hundreds
you have to take the drum out to repair this one
You can easily replace the capacitor by removing the fan cover bottom l right hand side . Then twist the fan cowling ,remove the fan and access the 13 mm nut on the capacitor. Reach in remove the 2 wires on the capacitor and reverse the process 10 minute job . 30 years time served whitegoods engineer
This on the back off the tumble dryer?
@@charliesworld9806very late reply but I had this problem with this exact machine. This comment worked perfectly for me! Thank you sir you are a gentle man and a scholar. You saved a lot of money being paid out
Update - I bought the right locking nut and it snapped on perfectly...My dishwasher now works properly again! Hoorah!
Hi, same stuff with ours, do you have a link on where you bought the right part ?
@@groovyshrubbery SMEG Spares
Did the issue come back after you cleared the fault? Wondering whether you had a persistent leak.
it came back every now and then... but i got another 2 years out of it.
@@BinanceStuff seems like you had a slow leak that needed plugging?
@@skiBumJ it would be dry and then suddenly full of water... so it wasnt a slow persistant leak
@@BinanceStuff how many times did that happen over the two years (roughly)?
@@skiBumJ 6 say...but it literally took 20 seconds to sought out once i'd done it a couple of times. I'd avoid smeg - the one i've bought now the arm keeps flying off it!
Hello hope you are well.. I have this exact problem and wondered if you have managed to get an answer from anyone on what to do. Thanks
Sort of got somewhere with it - i just haven't phoned them up! [email protected] My serial number is 50701 06921 on my dishwasher The locking nut on the green arm is number: 82733 on the pdf diagram that the spares department sent to me. This is their email they sent back to me: Good afternoon, Thank you for confirming. The part number for this item is 760570371 and the total price including the VAT and delivery is £7.39. We have the part in stock and would quote approximately 2-3 working days for delivery. If you would like to place an order please call our spares team on 0330 094 7779 (option 2)
Problem solved - £7.35 for a new locking nut and it worked - I honestly cannot see the difference between the old one and the new one but clearly it now works!
@@appliancesandstuffmisbehav1974 I had to buy both parts and I spent £24 and it seems to be working now thank you. The other problem I have is sometimes the tablet does not leave the table compartment. It opens but the tablet just sits there :(
@@tyralegge8124 don't bother with the compartment.... just throw it in the bottom.
@@tyralegge8124 I use powder and it all gets washed out cleanly. I am wondering if just putting the tablet in the compartment would just waste the tablet on the pre-rinse cycle with nothing left for the longer hot wash phase - that’s why there’s a compartment for it…?
Capacitor needs replacement
how easy is that to do and where do i get one for my machine? Also how do you know for sure it is capacitor?
@@appliancesandstuffmisbehav1974 💯 sour normally 8uf capacitor normally on ebay or Amazon . I’ve been a whitegoods engineer for over 30 years and replaced 100 of on these machines .
Hopefully this link might help I can do this with my eyes closed but trying to explain is a different matter
@@charliesworld9806 cheers mate... ill try and see if i can fix it myself then.
@@charliesworld9806 i think you might have forgotten to put a link in....i looked up the capacitor and there seems to be a lot on there - are they specific - or is it for any machine...thanks for your help - can't wait to get some spare time to tackle this...and show the wife a thing or two - lol!!! the last dryer i tried to fix fell apart lol.
Help - How does the green spinner fit snugly on the lower arm - I've checked the internet and loads of other people seem to be having exactly the same problem - this is ridiculous. E-spares please help me out?