This is a channel is for anyone that has an interest in auto repair. If your a do it yourselfer trying to save a buck or a person that has a serious interest in automobiles and auto repair this channel is for you. .
My steering wheel, floor and right seat vibrate between 70 and 90 mph. I changed new tires and new rims and the problem persists.I have balanced them about 8 times, the last time they came out 0 with 0, that is perfect and it still does.😢Hard to find good mechanics. Have a great day, thanks for the video.👍
@edpowell57545 сағат бұрын
From Buffalo, N.Y. Thank You so much for thus information. So it is OK to disconnect the plug without having to reset any kind of code?
@billbucktube6 сағат бұрын
Excellent closeup inserts showing the clips and clamps!
@BarboursAutoHelp2 сағат бұрын
Glad you liked it!
@dannyzr12148 сағат бұрын
Hello my question is will the air bubbles still come out even if the cooling system is full? Or does the system need to be empty thanks
@CRsquared18 сағат бұрын
Really good way of not only explaining what yoou are doing but ever better for those that dont know the process, you explain why you do things, Kudos my man
@seadrifter897510 сағат бұрын
Mine had a pinging noise when locking the steering wheel . Strut bearing seized . Thanks for the explanation 👍
@bgee509812 сағат бұрын
Very good info...
@MVPisME38319 сағат бұрын
This is why i still drive a 97 Silverado there's nothing on it i can't fix and it will be under $200 except for engine, trans or rear diff
@Lude-LifeКүн бұрын
what kind of car is this
@ecarrero01Күн бұрын
Thank you! My Grand Cherokee makes that sound.
@user-vf1jx7jh8lКүн бұрын
Are all the camshaft sensors all the same
@Thereal50inchDLPКүн бұрын
2011 is the cut off. Anyone who has a car newer than 2011 is either rich or an idiot.
@abdullahipad7664Күн бұрын
$1000 is pretty cheap considering how many parts are built into that assembly. If you want to see real expensive electronics, try a VW, BMW, or Mercedes. This isn’t a common point of failure either. The comparison to older vehicles is somewhat unfair considering the fact that this is a much more capable system that the crappy ABS and T/C that older vehicles had.
@BarboursAutoHelpКүн бұрын
I see where you’re coming from but they didn’t have to join 4 parts and make them one unit. The one shown in video is a cheap one. The chances of having to replace those part went up when they combined them.
@sidserv1978Күн бұрын
All the new traction control and abs is run through that unit. 1k is not too expensive for what it is. Try replacing one of those on a freightliner. The bleeding is not exactly quick and easy. Plus the software to program it to the vehicle. Nothing on a newer vehicle is cheap. The old brake systems had garbage for abs compared to the new systems. On a relatively small school bus fleet (36) I average 8k in parts per week. Plus i average 50 hours a week in labor to install those parts.
@BarboursAutoHelpКүн бұрын
lol. I’m not saying compared to other vehicles this one is expensive. Im saying they didn’t have to combine them and increase the cost. They also increased the probability that the unit as a whole will have to be replaced when they joined everything in my opinion.
@MiloTorres-yx5jwКүн бұрын
Just more to go wrong electrically sensors speaking , rounder wheel so to speak....🤔✌️🙏☝️💪
@peterlee1992Күн бұрын
It's true. I own a 05 tc and that shit is cheap to fix. Compared to other cars that will cost a whole week or 2 weeks of paycheck
@sarawentworth7967Күн бұрын
Meineje is saying I can drive with bad struts..it's making a horrible noise
@jcpettit1028Күн бұрын
Liked & Subscribed. Every planet came into alignment for me w/ this video - this marks the *first time* that a how-to video exactly matched the issue I'm trying to resolve (same make/model/ yr/ engine type - I mean, down to the part & it's breaking point). Hoping it's a good omen if those are even a thing.
@BarboursAutoHelpКүн бұрын
Don’t forget the planets in retrograde. Lol
@ScoomEntertainment2 күн бұрын
This was literally the best description of the purge valve well done!
@JadeChandlerGreco2 күн бұрын
Thanks so much! This was really informative & helpful
@BarboursAutoHelp2 күн бұрын
You are so welcome!
@wauncartierbenjamin21272 күн бұрын
Thanks you helped me out with the firing order i had 2 mixed up 🔥🔥🔥🔥
@nopehope76002 күн бұрын
I replaced my balljoiny on my crown Vic and it’s starting to make that noise again after a week
@cameroncabrera64762 күн бұрын
Why is this not common knowledge or in videos. I’ve done lots of bearings and always got lucky till now I gotta redo my front right bearing. Thank you sir
@trucker91572 күн бұрын
New subscriber,that’s a good video 👍
@portagepete12 күн бұрын
Before you take the head off you can put air pressure in the cylinder with the valves closed and hear air coming out but this is a good test also.
@thar73472 күн бұрын
Thanks, this is exactly what's wrong with my car.
@Kriscosmic2 күн бұрын
I’ve been trying to figure out what that noise was for the past year. I thought it was the ball joints and replaced them but it didn’t get rid of the noise. I even took it to a mechanic and they couldn’t figure it out
@magdalenoz33393 күн бұрын
This is what my bed sounds like when 🍆🍑❤😂
@HotRod-wv4vm3 күн бұрын
Thanks I had this issue with my 2004 Honda Element. Symptoms were exactly how you described. I replaced it myself with OEM transmission mount. However I had to get a special long socket (7 inches) from Amazon and problem solvef.
@BarboursAutoHelp3 күн бұрын
Heck yea! Great job!
@hunterallen25323 күн бұрын
Its the rattle im hearing in the video also from exhaust bolt?
@BarboursAutoHelp3 күн бұрын
I’m not sure what you’re asking. Can you clarify? Sorry for the inconvenience.
@titanniki4123 күн бұрын
Do you wait til it dries. Also what about the electrical connection. Or does it matter? Great video!
@SharonKirven3 күн бұрын
Hi, Thank you so much for this video it really showed me where I screwed up!! Omg.. so quick question. Since I literally unscrewed that 15mm bolt to release the belt while installing a new water pump and now I Can’t get the belt tight when putting it back on. I’ve tried too much to tighten this belt nd nothing seems to work. So should I just purchase a new pulley or do you have any suggestions to get this belt tight again? Thanks in Advice. Great video you have here by the way 😊 2005 SRX caddi
@henrydement84654 күн бұрын
Thank you! Your voice and tone are perfect. Simple yet detailed explanations. Love it!
@tonynoneya40224 күн бұрын
So how much would it cost me to replace on a 98 Chevy
@BarboursAutoHelp4 күн бұрын
You’ll have to ask the place you choose to have it replaced at. Prices vary greatly based on a myriad of factors.
@JJK-le2yj4 күн бұрын
Back in the 80's, I was taught to compress the pistons with a clamp or pliers without opening the bleeders, but it makes complete sense to open them, especially on cars with an HCU. It's crazy how many professional mechanics on you tube still dont open them, saying its not required. Thanks for the video!
@HALWG514 күн бұрын
We used Lucas Transmission Fix on my 2018 Explorer. Made a huge difference.
@jameswalker13345 күн бұрын
Fan belt with out a c pump
@BarboursAutoHelp5 күн бұрын
Ok
@gabrielaguilera42795 күн бұрын
What size bolts?
@Bedsitdweller5 күн бұрын
I did the test and as many have experienced, it turned green. I would say this is negative, since if you do the same test in the open air or in the house, it will also turn green.
@MartyBasss5 күн бұрын
Hey i loosened my bleeder screw and fluid came out and it looked clean but my piston still want budge idk but I’ve been trying to get this piston in for two days the otter side worked like charm no problems but that one piston is pissing me off idk
@BarboursAutoHelp5 күн бұрын
Sounds like you have a bad caliper. It’s not a twist in style is it?
@x_real_wit_it_x76056 күн бұрын
What’s size bolts fit where the rivets were
@aceking9x6 күн бұрын
My 2 block spark plug won't lock in place 😤 different problem
There was not an o-ring on the bolt going through the oil cooler.
@RoseSaenz-dk5xt7 күн бұрын
Thank you so much 🙏 this helped me right after I did my tune up on my Impala LS 02. 😮 I thought I totally screwed it up for sure. But u helped 😀
@BarboursAutoHelp7 күн бұрын
Glad to help!!
@rapinncapin1237 күн бұрын
Wow Great video!
@BarboursAutoHelp7 күн бұрын
Thank you.
@brownmuta75377 күн бұрын
thank you for doing the back and forth sound comparison
@BarboursAutoHelp6 күн бұрын
You bet!
@skg_jeweler7 күн бұрын
For removing the plastic cover, some of those cars with the Supercharger have a bolt that screws into the top, in the supercharger that'll need to be removed as well
Пікірлер
My steering wheel, floor and right seat vibrate between 70 and 90 mph. I changed new tires and new rims and the problem persists.I have balanced them about 8 times, the last time they came out 0 with 0, that is perfect and it still does.😢Hard to find good mechanics. Have a great day, thanks for the video.👍
From Buffalo, N.Y. Thank You so much for thus information. So it is OK to disconnect the plug without having to reset any kind of code?
Excellent closeup inserts showing the clips and clamps!
Glad you liked it!
Hello my question is will the air bubbles still come out even if the cooling system is full? Or does the system need to be empty thanks
Really good way of not only explaining what yoou are doing but ever better for those that dont know the process, you explain why you do things, Kudos my man
Mine had a pinging noise when locking the steering wheel . Strut bearing seized . Thanks for the explanation 👍
Very good info...
This is why i still drive a 97 Silverado there's nothing on it i can't fix and it will be under $200 except for engine, trans or rear diff
what kind of car is this
Thank you! My Grand Cherokee makes that sound.
Are all the camshaft sensors all the same
2011 is the cut off. Anyone who has a car newer than 2011 is either rich or an idiot.
$1000 is pretty cheap considering how many parts are built into that assembly. If you want to see real expensive electronics, try a VW, BMW, or Mercedes. This isn’t a common point of failure either. The comparison to older vehicles is somewhat unfair considering the fact that this is a much more capable system that the crappy ABS and T/C that older vehicles had.
I see where you’re coming from but they didn’t have to join 4 parts and make them one unit. The one shown in video is a cheap one. The chances of having to replace those part went up when they combined them.
All the new traction control and abs is run through that unit. 1k is not too expensive for what it is. Try replacing one of those on a freightliner. The bleeding is not exactly quick and easy. Plus the software to program it to the vehicle. Nothing on a newer vehicle is cheap. The old brake systems had garbage for abs compared to the new systems. On a relatively small school bus fleet (36) I average 8k in parts per week. Plus i average 50 hours a week in labor to install those parts.
lol. I’m not saying compared to other vehicles this one is expensive. Im saying they didn’t have to combine them and increase the cost. They also increased the probability that the unit as a whole will have to be replaced when they joined everything in my opinion.
Just more to go wrong electrically sensors speaking , rounder wheel so to speak....🤔✌️🙏☝️💪
It's true. I own a 05 tc and that shit is cheap to fix. Compared to other cars that will cost a whole week or 2 weeks of paycheck
Meineje is saying I can drive with bad struts..it's making a horrible noise
Liked & Subscribed. Every planet came into alignment for me w/ this video - this marks the *first time* that a how-to video exactly matched the issue I'm trying to resolve (same make/model/ yr/ engine type - I mean, down to the part & it's breaking point). Hoping it's a good omen if those are even a thing.
Don’t forget the planets in retrograde. Lol
This was literally the best description of the purge valve well done!
Thanks so much! This was really informative & helpful
You are so welcome!
Thanks you helped me out with the firing order i had 2 mixed up 🔥🔥🔥🔥
I replaced my balljoiny on my crown Vic and it’s starting to make that noise again after a week
Why is this not common knowledge or in videos. I’ve done lots of bearings and always got lucky till now I gotta redo my front right bearing. Thank you sir
New subscriber,that’s a good video 👍
Before you take the head off you can put air pressure in the cylinder with the valves closed and hear air coming out but this is a good test also.
Thanks, this is exactly what's wrong with my car.
I’ve been trying to figure out what that noise was for the past year. I thought it was the ball joints and replaced them but it didn’t get rid of the noise. I even took it to a mechanic and they couldn’t figure it out
This is what my bed sounds like when 🍆🍑❤😂
Thanks I had this issue with my 2004 Honda Element. Symptoms were exactly how you described. I replaced it myself with OEM transmission mount. However I had to get a special long socket (7 inches) from Amazon and problem solvef.
Heck yea! Great job!
Its the rattle im hearing in the video also from exhaust bolt?
I’m not sure what you’re asking. Can you clarify? Sorry for the inconvenience.
Do you wait til it dries. Also what about the electrical connection. Or does it matter? Great video!
Hi, Thank you so much for this video it really showed me where I screwed up!! Omg.. so quick question. Since I literally unscrewed that 15mm bolt to release the belt while installing a new water pump and now I Can’t get the belt tight when putting it back on. I’ve tried too much to tighten this belt nd nothing seems to work. So should I just purchase a new pulley or do you have any suggestions to get this belt tight again? Thanks in Advice. Great video you have here by the way 😊 2005 SRX caddi
Thank you! Your voice and tone are perfect. Simple yet detailed explanations. Love it!
So how much would it cost me to replace on a 98 Chevy
You’ll have to ask the place you choose to have it replaced at. Prices vary greatly based on a myriad of factors.
Back in the 80's, I was taught to compress the pistons with a clamp or pliers without opening the bleeders, but it makes complete sense to open them, especially on cars with an HCU. It's crazy how many professional mechanics on you tube still dont open them, saying its not required. Thanks for the video!
We used Lucas Transmission Fix on my 2018 Explorer. Made a huge difference.
Fan belt with out a c pump
Ok
What size bolts?
I did the test and as many have experienced, it turned green. I would say this is negative, since if you do the same test in the open air or in the house, it will also turn green.
Hey i loosened my bleeder screw and fluid came out and it looked clean but my piston still want budge idk but I’ve been trying to get this piston in for two days the otter side worked like charm no problems but that one piston is pissing me off idk
Sounds like you have a bad caliper. It’s not a twist in style is it?
What’s size bolts fit where the rivets were
My 2 block spark plug won't lock in place 😤 different problem
This guy really knows his stuff!
Excellent presentation...camera views...and dialogue. Nice Job.
Thank you very much!
Nicely well done 👍 tks for the tutorial
No problem 👍
Very well done video. Thank you!
No o ring on the bolt going threw the oil cooler?
There was not an o-ring on the bolt going through the oil cooler.
Thank you so much 🙏 this helped me right after I did my tune up on my Impala LS 02. 😮 I thought I totally screwed it up for sure. But u helped 😀
Glad to help!!
Wow Great video!
Thank you.
thank you for doing the back and forth sound comparison
You bet!
For removing the plastic cover, some of those cars with the Supercharger have a bolt that screws into the top, in the supercharger that'll need to be removed as well