My name is Jeff, and I'm the proud owner of a historic blacksmith shop that I've restored into my woodworking shop. Come along and see what nonsense I get into.
Tww brought me your way... subbed and looking forward to seeing how this shop comes along!!!
@HaylonWoodworking22 күн бұрын
Welcome! Glad to have you :)
@daveallen92425 күн бұрын
Glad you had help; imagine the doors are heavy. Looks great!
@HaylonWoodworking22 күн бұрын
No kidding! They probably weigh more than I do, each, and they're big boys. Still open and close just fine two years later with no adjustment to the hinges!
@rexmckinnonАй бұрын
Here from TWW. You have a dream shop. Hope to see more from you.
@HaylonWoodworkingАй бұрын
I'll be back, have no fear! Thanks and welcome :D
@Rich32262Ай бұрын
I also saw you on The Wood Whisperer's channel. Just a nugget since you have exterior walls. I have a Jet vacuum in my shop and read a lot about the upper bags and filters. The filters are expensive and cleaning sounds like a pain. My solution was I removed the top bag, cut a piece of plywood in a circle slightly larger in diameter than the rim the bag attaches to. I used my router to cut a channel to fit perfectly over the rim and then cut a hole in the center top to have an elbow come out (I used stove pipe) with a short piece of 4" flex hose that attaches to a clothes dryer vent that vents outside. Now all of the large chips fall to the bottom and the fine dust goes outside. I've been using this for years and super happy with it.
@HaylonWoodworkingАй бұрын
I debated an outside vent but postponed it for the sake of getting a workable system in place--I may well go that route in the future! Thanks for the tip!
@allan5721Ай бұрын
Here from the shop tour video from The Wood Whisperer. Very nice shop and you have an enjoyably calm presentation manner. I hope you do more videos.
@HaylonWoodworkingАй бұрын
Thanks much! I'll be back for sure. Life is a chaos heap at the moment but I'm getting through it!
@DennisDekker2288Ай бұрын
Good to see you're doing alright! Looking forward to more content :)
@DennisDekker2288Ай бұрын
Awesome, been binging this series the last two hours. All the work and effort being put into restoring this building is great. Deserves more views.
@HaylonWoodworkingАй бұрын
Thanks very much! I should be returning to less episodic content in the hopefully near future, which people seem to prefer, but I'm happy either way.
@DennisDekker2288Ай бұрын
Very cool proces to see you restoring the old blacksmith shop into a woodshop. Saw you being mentioned on the Wood Whisperer and immediately fell in love with your space, hopefully more viewers will follow!
@HaylonWoodworkingАй бұрын
Thanks very much, and welcome!
@alejandrocarrillo8322 ай бұрын
No sabes tornear principiante
@HaylonWoodworkingАй бұрын
Si no vas a decir nada bueno, mejor no digas nada.
@bfg2163 ай бұрын
Out of curiosity, how long did the peices take you? Im working on 1 and trying to figure out how much time i need to set aside for it
@HaylonWoodworking3 ай бұрын
This video was from a few years ago so I don't remember specifics, but once I got in the groove the pawns didn't take too long each. The more complex pieces, particularly the knights, take probably the better part of an hour. If I were to do this again, I would spend more time jigging things up so it would all be more repeatable.
@dianabennett58203 ай бұрын
Nice restoration. What do you set the bevels in with? Some sort of white compound?
@HaylonWoodworking3 ай бұрын
Glazing compound! Typically used on window glazing, but it's a good way to hold glass like the bubble cylinders in place.
@PoategProductions7 ай бұрын
HE'S BACK! So good to see the shop again! (And you too I suppose)
@HaylonWoodworking7 ай бұрын
I'm secondary in this equation and I accept that
@vectorax_7 ай бұрын
Wow, my spidey sense must have went off when you were editing this video as I left that last comment to check in out you. So glad to hear you have recovered and can't wait to see more. Love to see all the progress you've made!
@HaylonWoodworking7 ай бұрын
Grateful both for your spidey senses and your support :D
@nickihaylon42447 ай бұрын
WOOOO heat! I still can't get over how good the sign looks against the wood on the front of the shop, it really came together. Very cool that the granddaughter is coming to collect the old one!
@HaylonWoodworking7 ай бұрын
Big ups for painting said sign! All very cool stuff :D
@vectorax_7 ай бұрын
Decided to check in on your channel. Hope you are doing well. Would love an update. :)
@HaylonWoodworking7 ай бұрын
Good timing! Update coming out later today :)
@FilthyPancakes8 ай бұрын
Mine is almost exactly the same, this gives me a good place to start. Great video
@HaylonWoodworking7 ай бұрын
Best of luck!
@joefitzy Жыл бұрын
Knight to E2? Thanks for the video... I expected to see some sanding while on the lathe - did you sand the pieces at all? I'm not a fan of the brass tacks.
@HaylonWoodworking7 ай бұрын
I did sand--the dust it was throwing off made for poor footage. I've gotten mixed reviews on the brass, it seems.
@aaronarchibald673 Жыл бұрын
I just picked up one of these today, how do you determine the date it was manufactured. All I see are those same patent dates
@HaylonWoodworking Жыл бұрын
See about a minute into the video; the manufacturing date was stamped on the center brass piece.
@aaronarchibald673 Жыл бұрын
@@HaylonWoodworking perfect. Thank you. I missed that during the video!
@JayReidy Жыл бұрын
That rook is killing it!
@PoategProductions Жыл бұрын
Hope you can get back to it soon Jeff. Can't wait to come visit, help out, and see what has changed!
@HaylonWoodworking Жыл бұрын
Thanks very much! You know as well as I do I'll rope you into something next time you're in town.
@PoategProductions Жыл бұрын
Dats a good door bud
@HaylonWoodworking Жыл бұрын
Gets the job done!
@vectorax_ Жыл бұрын
Man, hate to hear that about your health. I hope you find some answers and a way to return to your hobby quickly. I totally understand the frustration of not knowing what's wrong, my daughter has a stomach condition that the doctors can't figure out and so they don't know how to treat it, but it's been absolutely brutal when she has an episode, one of the worst things I have ever experienced.
@HaylonWoodworking Жыл бұрын
Thanks very much for your support! It's definitely frustrating, but I'm just very lucky I didn't have a seizure while driving or using the lathe--could've been a lot worse. I'm in good hands but trying to listen to my doctors' advice and don't want to rush things. I'm hoping I can use this time to get a lot of other ducks in a row so when I'm cleared to do proper work again I can hit the ground running. P.S. I wish your daughter well. I'm in no way a medical professional, but a friend of mine suffers from endometriosis and had a similar issue that took a long time to get diagnosed.
@TheFrogfeeder Жыл бұрын
you’re straightforward, you’re fast, not a lot of bs in the video, and you’re good, I’ll sub
@HaylonWoodworking Жыл бұрын
Thanks very much!
@MrChipclip12345 Жыл бұрын
Instead of poly finish on food surfaces use mineral oil or boos block oil.
@vectorax_ Жыл бұрын
Great work, the doors look awesome.
@HaylonWoodworking Жыл бұрын
Thank you!
@lindathrall5133 Жыл бұрын
THAT LEVEL IS AN OLD MAN
@vectorax_ Жыл бұрын
Hope things are going well! Hope to see another update soon :D
@HaylonWoodworking Жыл бұрын
God willing, I'll have one out in the next couple weeks. This summer has been kicking my butt! As always, appreciate your constant support :D
@pradeepfreda5385 Жыл бұрын
Hi bro I am pradeep from India 🇮🇳 I Love this
@HaylonWoodworking Жыл бұрын
Glad you liked it, Pradeep! Thanks for watching.
@HaylonWoodworking2 жыл бұрын
Hi everyone! As this is my most-viewed video, I wanted to pop in and ask you to consider subscribing and checking out some of my newer content; I've been working on renovating a historic building into my dream shop. Thanks for watching!
@madisonevans99102 жыл бұрын
This is so awesome! Also oiling is definitely entertaining as well ;)
@HaylonWoodworking2 жыл бұрын
I wish my knees and back agreed with you! I earned a spa day after this one
@vectorax_2 жыл бұрын
Glad to see you back and see the project coming along! Going to be nice to have that space and be able to start to get things organized! Looking great!
@HaylonWoodworking2 жыл бұрын
Thanks as always for your kind words :D
@vectorax_2 жыл бұрын
How's the restoration going?
@HaylonWoodworking2 жыл бұрын
Hey, thanks for checking in! It's proceeding--Vermont winter really slowed me down, and I've had a busy spring in my real job. The video about restoring the floor (probably one of the more complex pieces of work I've done so far) should be out within a couple weeks. I have big plans for this summer and videos should be proceeding a little more quickly (though I'm still redirecting a bit for quality-over-quantity).
@Sam-tg4ii2 жыл бұрын
Hmm not sure if making frames strong is the point of miter joints. The point is having beautiful joints :)
@HaylonWoodworking2 жыл бұрын
I don't necessarily disagree, but I like different approaches to things too :)
@tharemyhopkins58732 жыл бұрын
Nice set; thank you for sharing.
@HaylonWoodworking2 жыл бұрын
Thanks for watching!
@rosascreativeworks54032 жыл бұрын
Nice. That's a cute little Media stand. 💪
@vectorax_2 жыл бұрын
coming along. but man you should have got yourself a nail gun
@HaylonWoodworking2 жыл бұрын
No disagreement here, but once I had done half of it I just figured I'd save the money--don't have much other use for a framing nailer!
@PoategProductions2 жыл бұрын
Can't wait to see it in it's final form!
@HaylonWoodworking2 жыл бұрын
Thanks for the help on this one :)
@vectorax_2 жыл бұрын
can't tell you how many xacto knives have flown by my head after rolling off the top of the ladder. so easy to forget you left things up there!
@HaylonWoodworking2 жыл бұрын
It's a real avalanche hazard! (Embarrassingly, I did the exact same thing two other times in the process of this video--fortunately had no head contact with either of them)
@chrism70672 жыл бұрын
you inspired me. I'm going to look into using this design but make both sides lift up and lock, this way you can place a leaf inbetween them I'm trying to find a way to have a coffee table in the living room that turns into a board game table
@HaylonWoodworking2 жыл бұрын
That sounds like an awesome project! Send me photos when it's done :D
@chrism70672 жыл бұрын
@@HaylonWoodworking will do!
@vectorax_2 жыл бұрын
nice work. is the door/opening as out of square as it looks or is it just the angle the camera is at?
@HaylonWoodworking2 жыл бұрын
It's a little of both, but mostly it's because that small wall section is dangling free at the moment and is bent out of the way. I'll be re-framing it in the next episode :)
@MrFRSHClan2 жыл бұрын
This is so awesome, can't wait to see future progress!
@HaylonWoodworking2 жыл бұрын
Thanks, Pat!
@vectorax_2 жыл бұрын
Looking forward to seeing this project progress. Can't imagine how much of a financial setback this is.
@HaylonWoodworking2 жыл бұрын
It was in the budget, but I might be eating ramen for a couple months :)
@garth_43672 жыл бұрын
Amazing to see a building lifted like that, can't wait for more progress
@HaylonWoodworking2 жыл бұрын
Thanks, Garth! 8x8s for the sill beams are being delivered tomorrow, expect a video on that process within a week or two :)
@jamesrobbins262 жыл бұрын
I likecwhat you did here. It looks good.
@HaylonWoodworking2 жыл бұрын
Thanks, James!
@MebelArtha2 жыл бұрын
Semoga makin sukses bang
@familyread78892 жыл бұрын
Nice shop 👍🏽
@HaylonWoodworking2 жыл бұрын
Thanks 👍
@TheSGBrown2 жыл бұрын
Fwiw, it's TWO queens of each color for unhindered, proper play. (pawn promotion.) -Ask your brother and his friends. :)
@HaylonWoodworking2 жыл бұрын
Noted!
@TheSGBrown2 жыл бұрын
Beginner lathe project? Naw, making chess pieces can become an art. In fact, India has a growing cottage industry around creating chess pieces for the 20+ million chess players and collectors around the globe. 'Grats on your enthusiasm; your deft, growing skills, and your thoughtful expression of goodwill towards your brother! -Yeah, now maybe your brother will mow your lawn into the next forever! /grins
@HaylonWoodworking2 жыл бұрын
Well, I'm a beginner on the lathe and it was a project :) Thank you for your kind words!
@Woodside2352 жыл бұрын
Oddly charming to see a set so inconsistent. Makes it feel a lot more personal.
@HaylonWoodworking2 жыл бұрын
The inconsistencies are what makes it (and us) human :)
Пікірлер
Tww brought me your way... subbed and looking forward to seeing how this shop comes along!!!
Welcome! Glad to have you :)
Glad you had help; imagine the doors are heavy. Looks great!
No kidding! They probably weigh more than I do, each, and they're big boys. Still open and close just fine two years later with no adjustment to the hinges!
Here from TWW. You have a dream shop. Hope to see more from you.
I'll be back, have no fear! Thanks and welcome :D
I also saw you on The Wood Whisperer's channel. Just a nugget since you have exterior walls. I have a Jet vacuum in my shop and read a lot about the upper bags and filters. The filters are expensive and cleaning sounds like a pain. My solution was I removed the top bag, cut a piece of plywood in a circle slightly larger in diameter than the rim the bag attaches to. I used my router to cut a channel to fit perfectly over the rim and then cut a hole in the center top to have an elbow come out (I used stove pipe) with a short piece of 4" flex hose that attaches to a clothes dryer vent that vents outside. Now all of the large chips fall to the bottom and the fine dust goes outside. I've been using this for years and super happy with it.
I debated an outside vent but postponed it for the sake of getting a workable system in place--I may well go that route in the future! Thanks for the tip!
Here from the shop tour video from The Wood Whisperer. Very nice shop and you have an enjoyably calm presentation manner. I hope you do more videos.
Thanks much! I'll be back for sure. Life is a chaos heap at the moment but I'm getting through it!
Good to see you're doing alright! Looking forward to more content :)
Awesome, been binging this series the last two hours. All the work and effort being put into restoring this building is great. Deserves more views.
Thanks very much! I should be returning to less episodic content in the hopefully near future, which people seem to prefer, but I'm happy either way.
Very cool proces to see you restoring the old blacksmith shop into a woodshop. Saw you being mentioned on the Wood Whisperer and immediately fell in love with your space, hopefully more viewers will follow!
Thanks very much, and welcome!
No sabes tornear principiante
Si no vas a decir nada bueno, mejor no digas nada.
Out of curiosity, how long did the peices take you? Im working on 1 and trying to figure out how much time i need to set aside for it
This video was from a few years ago so I don't remember specifics, but once I got in the groove the pawns didn't take too long each. The more complex pieces, particularly the knights, take probably the better part of an hour. If I were to do this again, I would spend more time jigging things up so it would all be more repeatable.
Nice restoration. What do you set the bevels in with? Some sort of white compound?
Glazing compound! Typically used on window glazing, but it's a good way to hold glass like the bubble cylinders in place.
HE'S BACK! So good to see the shop again! (And you too I suppose)
I'm secondary in this equation and I accept that
Wow, my spidey sense must have went off when you were editing this video as I left that last comment to check in out you. So glad to hear you have recovered and can't wait to see more. Love to see all the progress you've made!
Grateful both for your spidey senses and your support :D
WOOOO heat! I still can't get over how good the sign looks against the wood on the front of the shop, it really came together. Very cool that the granddaughter is coming to collect the old one!
Big ups for painting said sign! All very cool stuff :D
Decided to check in on your channel. Hope you are doing well. Would love an update. :)
Good timing! Update coming out later today :)
Mine is almost exactly the same, this gives me a good place to start. Great video
Best of luck!
Knight to E2? Thanks for the video... I expected to see some sanding while on the lathe - did you sand the pieces at all? I'm not a fan of the brass tacks.
I did sand--the dust it was throwing off made for poor footage. I've gotten mixed reviews on the brass, it seems.
I just picked up one of these today, how do you determine the date it was manufactured. All I see are those same patent dates
See about a minute into the video; the manufacturing date was stamped on the center brass piece.
@@HaylonWoodworking perfect. Thank you. I missed that during the video!
That rook is killing it!
Hope you can get back to it soon Jeff. Can't wait to come visit, help out, and see what has changed!
Thanks very much! You know as well as I do I'll rope you into something next time you're in town.
Dats a good door bud
Gets the job done!
Man, hate to hear that about your health. I hope you find some answers and a way to return to your hobby quickly. I totally understand the frustration of not knowing what's wrong, my daughter has a stomach condition that the doctors can't figure out and so they don't know how to treat it, but it's been absolutely brutal when she has an episode, one of the worst things I have ever experienced.
Thanks very much for your support! It's definitely frustrating, but I'm just very lucky I didn't have a seizure while driving or using the lathe--could've been a lot worse. I'm in good hands but trying to listen to my doctors' advice and don't want to rush things. I'm hoping I can use this time to get a lot of other ducks in a row so when I'm cleared to do proper work again I can hit the ground running. P.S. I wish your daughter well. I'm in no way a medical professional, but a friend of mine suffers from endometriosis and had a similar issue that took a long time to get diagnosed.
you’re straightforward, you’re fast, not a lot of bs in the video, and you’re good, I’ll sub
Thanks very much!
Instead of poly finish on food surfaces use mineral oil or boos block oil.
Great work, the doors look awesome.
Thank you!
THAT LEVEL IS AN OLD MAN
Hope things are going well! Hope to see another update soon :D
God willing, I'll have one out in the next couple weeks. This summer has been kicking my butt! As always, appreciate your constant support :D
Hi bro I am pradeep from India 🇮🇳 I Love this
Glad you liked it, Pradeep! Thanks for watching.
Hi everyone! As this is my most-viewed video, I wanted to pop in and ask you to consider subscribing and checking out some of my newer content; I've been working on renovating a historic building into my dream shop. Thanks for watching!
This is so awesome! Also oiling is definitely entertaining as well ;)
I wish my knees and back agreed with you! I earned a spa day after this one
Glad to see you back and see the project coming along! Going to be nice to have that space and be able to start to get things organized! Looking great!
Thanks as always for your kind words :D
How's the restoration going?
Hey, thanks for checking in! It's proceeding--Vermont winter really slowed me down, and I've had a busy spring in my real job. The video about restoring the floor (probably one of the more complex pieces of work I've done so far) should be out within a couple weeks. I have big plans for this summer and videos should be proceeding a little more quickly (though I'm still redirecting a bit for quality-over-quantity).
Hmm not sure if making frames strong is the point of miter joints. The point is having beautiful joints :)
I don't necessarily disagree, but I like different approaches to things too :)
Nice set; thank you for sharing.
Thanks for watching!
Nice. That's a cute little Media stand. 💪
coming along. but man you should have got yourself a nail gun
No disagreement here, but once I had done half of it I just figured I'd save the money--don't have much other use for a framing nailer!
Can't wait to see it in it's final form!
Thanks for the help on this one :)
can't tell you how many xacto knives have flown by my head after rolling off the top of the ladder. so easy to forget you left things up there!
It's a real avalanche hazard! (Embarrassingly, I did the exact same thing two other times in the process of this video--fortunately had no head contact with either of them)
you inspired me. I'm going to look into using this design but make both sides lift up and lock, this way you can place a leaf inbetween them I'm trying to find a way to have a coffee table in the living room that turns into a board game table
That sounds like an awesome project! Send me photos when it's done :D
@@HaylonWoodworking will do!
nice work. is the door/opening as out of square as it looks or is it just the angle the camera is at?
It's a little of both, but mostly it's because that small wall section is dangling free at the moment and is bent out of the way. I'll be re-framing it in the next episode :)
This is so awesome, can't wait to see future progress!
Thanks, Pat!
Looking forward to seeing this project progress. Can't imagine how much of a financial setback this is.
It was in the budget, but I might be eating ramen for a couple months :)
Amazing to see a building lifted like that, can't wait for more progress
Thanks, Garth! 8x8s for the sill beams are being delivered tomorrow, expect a video on that process within a week or two :)
I likecwhat you did here. It looks good.
Thanks, James!
Semoga makin sukses bang
Nice shop 👍🏽
Thanks 👍
Fwiw, it's TWO queens of each color for unhindered, proper play. (pawn promotion.) -Ask your brother and his friends. :)
Noted!
Beginner lathe project? Naw, making chess pieces can become an art. In fact, India has a growing cottage industry around creating chess pieces for the 20+ million chess players and collectors around the globe. 'Grats on your enthusiasm; your deft, growing skills, and your thoughtful expression of goodwill towards your brother! -Yeah, now maybe your brother will mow your lawn into the next forever! /grins
Well, I'm a beginner on the lathe and it was a project :) Thank you for your kind words!
Oddly charming to see a set so inconsistent. Makes it feel a lot more personal.
The inconsistencies are what makes it (and us) human :)
Great job, very fast
Thanks!