Пікірлер

• 
  @drewledford93488 күн бұрын

  What is your tire and wheel set up!? Those look great!

• 
  @smallscaleadventures8 күн бұрын

  Cheers, here the wheel build... kzread.info/dash/bejne/eKGZucqkgdPanpc.html MN D90-99s Wheels and Tyres: s.click.aliexpress.com/e/_DdKh6lV Metal 1/16 Truck Wheels: s.click.aliexpress.com/e/_DCiBUir

• 
  @drewledford93488 күн бұрын

  @@smallscaleadventures thank you!

• 
  @TheSprul859 күн бұрын

  Do you still use the original wpl c64-1 remote control after you done upgrade it?

• 
  @smallscaleadventures9 күн бұрын

  No I use a B36-3 controller because it has the winch controller Chanel lever.

• 
  @MH4family17 күн бұрын

  Wow! Mn getting ahead!

• 
  @klngkongcorey17 күн бұрын

  Order 2/ two today 🤪😏🙂😎

• 
  @GuySasha202229 күн бұрын

  What metal upgrades are available? Thanks!

• 
  @smallscaleadventures29 күн бұрын

  The WPL metal axle and shaft kits go straight on. The two speed fits or the 370 gearbox from the C74 is a straight swap. I'm not going to bother with metal links on mine unless the plastic ones are a problem. www.wpl-rc.com/products/metal-upgrade-for-4x4?ref=ssa

• 
  @GuySasha202229 күн бұрын

  Ordered one

• 
  @rcreactioner29 күн бұрын

  Nice car

• 
  @RetryWin_480Ай бұрын

  Cool customization👍 Where did You buy those stickers?

• 
  @smallscaleadventuresАй бұрын

  Thanks, they are my own design and cut. I'll add the plot paths to my Thingiverse and put a link in the video description later today.

• 
  @brsrc759Ай бұрын

  You can't post functioning links in the description of shorts videos. Can you post it here in the comments please? The truck looks awesome but those wheels are just way too big

• 
  @smallscaleadventuresАй бұрын

  Yeah, those wheels! I have one ordered and it will be getting narrower WPL axles and smaller wheels, which should help the proportions no end! Give this link a try: www.aliexpress.com/item/1005007090715398.html?spm=a2g0o.order_list.order_list_main.4.793d1802he1qKy

• 
  @brsrc759Ай бұрын

  @@smallscaleadventures thank you 😎🤙🏽

• 
  @robertveeneman9229Ай бұрын

  I'm thinking about getting the control board for an E1 and putting it into my sons C14 and having the dual functionality. Could it be that easy? I haven't looked into it deeply yet, and I am not sure if the board from the E1 would work. I don't see why not...

• 
  @KidNomuraАй бұрын

  Did you clear coat after sticking those decals?

• 
  @smallscaleadventuresАй бұрын

  No they are just cut vinyl applied directly to the plastic body - no paint or clear coat.

• 
  @KidNomuraАй бұрын

  @@smallscaleadventures i wanna do the same! 😁😁

• 
  @N0CKTERNULАй бұрын

  What tires and wheels are those and do they fit the 5mm stock axles?

• 
  @smallscaleadventuresАй бұрын

  They are WPL V1 tyres and wheels on a custom wide wheel build using 1/16 truck wheels. Check out the video: kzread.info/dash/bejne/aZqI1M6OkqyTk6g.htmlsi=cwyS5JCXrb-wFSUH

• 
  @N0CKTERNULАй бұрын

  Ordered one today! Can't wait to get it out on the rocks and trails

• 
  @brsrc759Ай бұрын

  Beautiful build!

• 
  @rcocmАй бұрын

  Nice, I like the look of this one. The detail in that hardbody is superb 👌 will be ordering mine soon 😊

• 
  @rcocmАй бұрын

  A very cool and capable truck 👌 nice work!

• 
  @smallscaleadventuresАй бұрын

  Thanks man!

• 
  @muhdarfanzaki1434Ай бұрын

  Does the C64-1 have the same or different stock electronics compared to C54-1? I have multiple issues with C54-1 260 motor.. even with 370 motor , they tend to burn out easily if pushed too hard for crawling. They say it could be the stock electronics not being adequate/optimised Anyways, loved your rig design !

• 
  @smallscaleadventuresАй бұрын

  It has upgraded electronics to the C54-1. This board has a built in switchable drag brake.

• 
  @thierryg6475Ай бұрын

  Salut Peut on trouver les vinyls dans le commerce ?

• 
  @jamesbatso4092Ай бұрын

  does it ever drop connection?

• 
  @smallscaleadventuresАй бұрын

  This one was a pre-release version, the same as you may have seen mentioned by other reviewers. Yes it did suffered the premature thermal cut out - however when it was running the original board I made a simple solder bridge modification to one of the resistors which cured the problem entirely. Customer versions from the official store have an updated board, so this is not an issue for rigs bought from the store after the official release. Mine has now been swapped for a B36-3 board to operate the winch.

• 
  @jamesbatso4092Ай бұрын

  @@smallscaleadventures nice. I am still going to get one but its good to know they sorted it , if mine cuts out i will be on to you for the solder mod 😅

• 
  @smallscaleadventuresАй бұрын

  Cool, if it does, which is unlikely, you'll need to bridge the contacts of either the R3 or R11 resistor. I did this by laying a leg I cut off of a spare LED next to the resistor (R3 in my case) then soldering across from the original surface mount resistor tabs.

• 
  @jamesbatso4092Ай бұрын

  @@smallscaleadventurescool. nice one mate, mine is on its way so we shall see 👀😀

• 
  @redzudsbke5082Ай бұрын

  TRD stripe rocks!

• 
  @smallscaleadventuresАй бұрын

  Cheers!

• 
  @VermontScaleCustomsАй бұрын

  Digging your paint scheme.

• 
  @smallscaleadventuresАй бұрын

  Thanks man, though there's no paint It's the original body colour and some cut vinyl.

• 
  @case8729Ай бұрын

  Following this is better than the wpl instructions on their site thanks man 👊🏽👍

• 
  @mowglippmlАй бұрын

  This is so cool!

• 
  @SparrohАй бұрын

  This looks really good

• 
  @oioindoor8155Ай бұрын

  keep up the good work subbed

• 
  @Drbrian7582Ай бұрын

  Same Jimny wheels

• 
  @smallscaleadventuresАй бұрын

  Yeah they are, but with the RTR V1 tyres on this model.

• 
  @RCManiacsАй бұрын

  Excellent video, Mark! Cant wait to get mine 😍

• 
  @EdwardChewАй бұрын

  Wawwww!

• 
  @carloshnunezАй бұрын

  The previous version was more realistic 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

• 
  @smallscaleadventuresАй бұрын

  C14/24 is still available and it looks like the body will swap across onto this much better chassis fairly easily.

• 
  @carloshnunezАй бұрын

  @@smallscaleadventures Yea those are great I mean the C64 with the IRS suspension on the front it is more realistic

• 
  @randyryanson1711Ай бұрын

  What are the wheels n tires

• 
  @smallscaleadventuresАй бұрын

  Here's how they are built... kzread.info/dash/bejne/aZqI1M6OkqyTk6g.htmlsi=AxuaBhsoJwyES3R-

• 
  @CustomRcGarage2 ай бұрын

  Ool😊

• 
  @ChrissibabyUK2 ай бұрын

  This. Is. It.

• 
  @osmanaydin33342 ай бұрын

  Hi, I need some help with wpl b24. Actually, we turned that on today after one week. It worked but suddenly stopped. Now, it has less or no power, and some smell from motor. It cannot start itself, I rotate the shaft and it starts. Then after ten seconds stops again.

• 
  @PaPi.72 ай бұрын

  How do you make the tire like that?

• 
  @smallscaleadventures2 ай бұрын

  Sorry missed this question - check this out.... kzread.info/dash/bejne/aZqI1M6OkqyTk6g.html

• 
  @papatuna2 ай бұрын

  how'd you get the rod out of the housing? I tried to unscrew it from the inside but it just spins

• 
  @smallscaleadventures2 ай бұрын

  Take the top cap off, then remove the spring. Push the rod all the way up and you will see that it has a cross head screw on the top. hold the plastic mount at the bottom and use a screwdriver to unscrew the rod.

• 
  @aeroelastic67363 ай бұрын

  Great video, good articulation! What servo mount did you use?

• 
  @smallscaleadventures3 ай бұрын

  Thanks, that's my own design using PCB standoffs fixed to the axle mounting points and a flat GRP plate with the servo attatched.

• 
  @aeroelastic67363 ай бұрын

  @@smallscaleadventures thanks. You have to cut a fair bit if the original servo tray off to fit?

• 
  @smallscaleadventures3 ай бұрын

  Yeah, quite a bit of cutting to the tray. There's some pictures here of how I've fitted my more recent design mount that bolts on under the axle inspection cover. facebook.com/share/p/XXehqKfVtiTzex2G/

• 
  @aeroelastic67363 ай бұрын

  @@smallscaleadventures Thanks. 👍.So the new false floor is glued to the top of the servo? So at full compression this can move up further.

• 
  @smallscaleadventures3 ай бұрын

  @@aeroelastic6736 In that instance the false floor was just glued to the top of the remains of the original servo tray. It gave just enough room for the servo to move up underneath. However on another build I did just cut the original servo tray out completely and stick the esc directly to the top of the steering servo because there was not enough room for the false floor method.

• 
  3 ай бұрын

  what paint did you use for the gold?

• 
  @smallscaleadventures3 ай бұрын

  I think it was a Uni branded paint pen, but it might have been a gold automotive spray paint - sorry I can't remember.

• 
  @user-jb6pt2wx9c3 ай бұрын

  It can be upgrade with shock absorber??

• 
  @spacegirlproduction95064 ай бұрын

  Was is hard to remove the sides of the chassi?

• 
  @smallscaleadventures3 ай бұрын

  Sorry only just seen this, no not at all. On one I used a cutting disk in a Dremel type rotary tool. On another I have cut along the edge several times lightly with a craft knife to gradually increase the depth of the cut.

• 
  @mcemtpockets17754 ай бұрын

  Very fun toys

• 
  @mattp78724 ай бұрын

  I’m into this chassis! Guess I’ll take my chances and order one. Great video!

• 
  @cavgonzales4 ай бұрын

  Aloha, love the look of your rig! Where did you get your fender flares?

• 
  @smallscaleadventures4 ай бұрын

  Thanks! The flares are a WPL upgrade parts. www.wpl-rc.com/products/front-rear-fenders-for-c74?ref=ssa

• 
  @user-cl4zh4fl5p4 ай бұрын

  Зря разобрал а так прикольно 👍

• 
  @taufanprawira28464 ай бұрын

  Where did you buy those wheels?

• 
  @smallscaleadventures4 ай бұрын

  They are custom made. Links to the parts are in the description of this video: kzread.info/dash/bejne/eKGZucqkgdPanpc.htmlsi=FR8gCPdPrsWFMX9S

• 
  @mattp78724 ай бұрын

  Sweet rig!! I ordered the body only, I’m thinking of trying to fit a different set of axles under that bad boy

• 
  @rainstorm52454 ай бұрын

  👍🏾👍🏾

• 
  @winteronice4 ай бұрын

  $200 on upgrades on a $50 RC car. That is one very good platform. It's crazy capable by the looks of it.

• 
  @91forever5 ай бұрын

  What wheels are those?

• 
  @rc4life5785 ай бұрын

  am i right that extanded fenders were only on 4wd hilux (so turn signals), So WPL isnt really correct making 2wd with index-1. Like in your picture at 6.00 2wd with thin fenders and triangle turn light with angle at the bottom while on 4WD ( because of extended fenders ) this "triangle's angle looks down"