Пікірлер

• 
  @brianhz34 күн бұрын

  What’s the update on this? How’s it looking now?

• 
  @matthewloew230918 күн бұрын

  Your fuel economy is gone.

• 
  @DevonsGarage18 күн бұрын

  @@matthewloew2309 surprisingly no, I had the opposite happen because of my low end torque with the 4.56. At least this is in regards of the gearing for my tire size. Now if you want to say my fuel economy went down because of 37’s, sure, that is expected. And if you are comparing highway speed only, also sure. But overall average I was not putting that stress on the drivetrain trying to get up to speed and saw minimal difference on mpg before and after but was able to get a better number during city driving comparisons when just comparing gear ratios.

• 
  @adrianespinoza44319 күн бұрын

  What spray did you use & where can I buy it

• 
  @DevonsGarage18 күн бұрын

  @@adrianespinoza443 I should have a link in the description to the product itself but it is an automotive fabric dye from Mashimarho

• 
  @Doc185522 күн бұрын

  We are SICK and TIRED of Gloomy Grey and Death Black interior colors that became popular in 1990 and Every automaker has been shoving down everyone’s throats for 34 FREAKING YEARS ! My 23 Tacoma TRD Off Road has the Horrible Black Leather interior. Thank God Katzkin made me Lava Red Leather seat covers with black trim and stitching. I’m over the moon to get rid of some of that old outdated Death Black interior.

• 
  @DevonsGarage18 күн бұрын

  @@Doc1855 I’m totally all for the different color leather and seats especially red, I’ve always been a fan, but for upper interior like headliner and pillars, I personally have always disliked the tan/beige and greys. To me they feel cheap and commercial. Bland(not that black couldn’t be considered bland as well to others). I understand a lighter interior is there to make the space feel larger or more open and brighter but to me a darker interior feels more luxury and sporty. Gives it an edgy feel. I think it’s all about preference to each person. Also for me, black leather has one great feature that I can’t dirty it up as easily as a lighter option. I work as a laborer and often get in my vehicles covered in grease, mud, dirt, etc and would hate to stain a white or light colored leather. Again totally preference though as some white seats out there look very crisp and sharp! ..mine would eventually be grey anyway haha

• 
  @Doc185518 күн бұрын

  @@DevonsGarage I understand what you’re saying. We live in the country and we take our Tacoma TRD off roading on dusty forest and back roads. The tan dust shows Everything on my black leather seats

• 
  @deeeezel27 күн бұрын

  Too bad nobody told you the upper radiator support comes off in like 2 minutes and saves like an hour on this install.

• 
  @josephdufrene1886Ай бұрын

  Dude! Same thing happened to my maxpeeding rod coil overs in the rear. Not even 50 miles and the bushings almost shot out in the rear. I was lucky I had to adjust the height some more or else I would’ve been in big trouble. I read on a thread to just put the bolt in from the other side and that metal piece still slides into the back of the hub. Has been good so far.

• 
  @wilfredodelossantos9069Ай бұрын

  Gorgeous and dependable truck❤

• 
  @rreal1k_Ай бұрын

  I want to do this when I get my car but why not just spray the black spray over everything that was grey when you seen the spray worked instead of putting the black pieces on ?

• 
  @ownitdontwasteit2 ай бұрын

  I did the same way without moving some things 😅

• 
  @duartestudios2 ай бұрын

  you can totally remove the headliner without removing any glass....

• 
  @urbanmechanic92542 ай бұрын

  My silverado is basically this I used ppf but the flares changed the total look

• 
  @coreysieminowski94742 ай бұрын

  Why we all keep the antenna in the same spot

• 
  @amairiahmed68912 ай бұрын

  No oil for PTFE seal

• 
  @rogeriafrois96012 ай бұрын

  What type of paint did you use?

• 
  @bbehzadi4132 ай бұрын

  I run redline shockproof in my STI

• 
  @sythnapubg79262 ай бұрын

  How did it hold up? You still happy with it or would rather leave it alone if you could go back in time?

• 
  @RickRijuanaPro2 ай бұрын

  Thats how my car is. WTF would they 2 tone the interior

• 
  @xxxxRelentlessxxxx3 ай бұрын

  Same truck but doing a 2 inch level kit will same specs work?

• 
  @gwolf77163 ай бұрын

  The truck can handle the numerically lower ratio very well. I see leaving stock and enlarging the tires as a higher gear and savings on miles on the clock if you are still in warranty.

• 
  @MrDrag1on3 ай бұрын

  Speed is not accurate unless they reprogrammed...

• 
  @theavgjoe54853 ай бұрын

  Do you think you could get away with same tire and wheel setup but with a 2inch level kit with no rubbing?

• 
  @DevonsGarage3 ай бұрын

  I believe it would rub depending on actual tire size (manufacturers vary within an inch) because I was border line close to rubbing especially if going up a driveway at a turn. You could probably do it but you will have to be really slow when turning and going off camber at the same time or you’ll catch a corner of the fender

• 
  @rylanhutfless92403 ай бұрын

  i’m so glad this video exists, made up my mind to do this on my 1500, already have all the paint and dye. Gonna start the process in a few weeks

• 
  @DavidMunozVasquez3 ай бұрын

  too much sh*t talking.

• 
  @DevonsGarage3 ай бұрын

  Well dang... luckily many other people thought otherwise

• 
  @bobsmithinson20504 ай бұрын

  Thanks for posting this. Was On the fence of going cheap again like my first e39, but remembered all the shenanigans like cutting the sleeves and the stiffness. BC’s it is!

• 
  @DevonsGarage4 ай бұрын

  You won’t regret it!

• 
  @boost72364 ай бұрын

  I have a question bro! Do you have to use that sealant from fcp specifically? Is there any other sealant I can use? Thanks in advance

• 
  @DevonsGarage4 ай бұрын

  It’s been a little while since we did it and my buddy bought the kit, I think honestly we used that sealant because it came with it however I bet if I did some research some high quality black RTV would work too but don’t quote me on that, I would have to compare them before I gave my own approval haha

• 
  @boost72364 ай бұрын

  I like how you actually show the process literally , nice vid bro thanks

• 
  @Jaayraaay4 ай бұрын

  Another Jerry with a J that daily's a 03 ep3 that was originally silver😂 right here

• 
  @DevonsGarage4 ай бұрын

  That is so rad, I was just rewatching this video last Friday! How coincidental haha

• 
  @jacobm95744 ай бұрын

  Will I blow up my truck or screw anything up running 37s and 3.42?

• 
  @jacobm95744 ай бұрын

  (45hp tune, 3 inch lift)

• 
  @codygalloway53862 ай бұрын

  You shouldn't have any problems with it. You may notice a decrease in fuel mileage and a little more lug under a load. But it won't hurt the truck.

• 
  @jacobm95742 ай бұрын

  @@codygalloway5386 thanks

• 
  @felipesalas29395 ай бұрын

  any difference in mpg?

• 
  @matthewloew230918 күн бұрын

  Lower mpg for sure

• 
  @erniegregor83945 ай бұрын

  Great video. It took me many attempts to, with all bc the screws. I had to rotate the crank to use a new location on the seal with the screws for each attempt. I used a torch to heat up the block around the seal, may or may not have helped. Finally got it

• 
  @chevyriding46465 ай бұрын

  Dudes a nerd 🤓 nice truck tho bro i just got a rebel an tryna find a kew lil build

• 
  @DevonsGarage5 ай бұрын

  Haha thanks bro yeah I get a bit goofy

• 
  @chevyriding46465 ай бұрын

  ​@DevonsGarage lol just when u was explaining the mirriors was funny I just thought dam my guy is a dork 😅

• 
  @chevyriding46465 ай бұрын

  And one question how did you paint the skid plate

• 
  @DevonsGarage5 ай бұрын

  @@chevyriding4646 Raptor Black UP4883 Bedliner 13.02 Oz 2K Aerosol Search that on Amazon, some Oreillys carry it too. That stuff is insane! Works so well! Never chipped or anything

• 
  @danielphillipsmusic91455 ай бұрын

  Did you ever compile a parts list for this project?

• 
  @DevonsGarage5 ай бұрын

  Yes, located in the description under the video 👍🏻

• 
  @danielphillipsmusic91455 ай бұрын

  Oh, man, I just picked up a 2020 Warlock so I could retire my 16 Rubicon as my daily driver. Only thing I don’t like about the truck is that awful beige on the top half of the cab.

• 
  @Sdukes0015 ай бұрын

  How do you like the 4.56s? Would it be a huge difference to 4.10s or possibly 4.30s?

• 
  @2ndAmendmentGlock6 ай бұрын

  So did this actually fix your problem?

• 
  @DevonsGarage6 ай бұрын

  Yes, the code never came back after that

• 
  @MrTitobanana6 ай бұрын

  thanks for this vid bro. a godsend for a dude with an 04 with a leaky valve cover gasket dripping oil onto his exhaust and the synchros on their way out. good to know that these are both known issues with this car.

• 
  @DevonsGarage6 ай бұрын

  Love comments like this man thank you!

• 
  @user-uq3vw2pd2y6 ай бұрын

  Nice truck! What’s the part number for that s type muffler? Sounds great!

• 
  @user-xw9gs7gy9j6 ай бұрын

  I’ve been trying to find a video to replace the interior with out paint but with cloth interior

• 
  @javiersosa39447 ай бұрын

  I’m kinda sad for that m3 🤦🏻‍♂️

• 
  @DevonsGarage7 ай бұрын

  How so? BC coils were too cheap or? The car was very well kept after and is still being enjoyed by another owner on the same setup minus the wheels

• 
  @KennethWashington-oc4tz7 ай бұрын

  Send me ur number please I need u

• 
  @harryl82347 ай бұрын

  Lame

• 
  @RichValentine19727 ай бұрын

  Sweet ride!

• 
  @flamingorock7 ай бұрын

  Awesome effort with the video but I'm so sorry... No cigar. See, i was about to try this but you don't detail exactly where you need to put the jack in order to keep it (the engine?) suspended. If I'm missing something please let me know. I feel like you skimmed over that part a bit.

• 
  @pvl3617 ай бұрын

  Great video. I have a 2014 1500 tradesman and I can’t seem to find any of the black pillars. Even all the part out trucks I’ve come across have just beige. I’m getting close to just getting a can of spray paint from Walmart 😂😂

• 
  @DevonsGarage7 ай бұрын

  If you do get to where you just want to paint them as I’m sure the parts are getting hard to come by, they DO have a trim specific paint and I’ve heard very good things about it! I would give that a shot before just the generic spray paint. I want to say Rustoleum makes the trim paint but that’s just a guess, it’s been a while since I had seen a friend use some and it came out great!

• 
  @MrSilentman088 ай бұрын

  buying the Havoc edition soon, full color match to the truck.probably run 22x10 wheels

• 
  @kevinjl22028 ай бұрын

  Right up until the ball joint breaks.... change the uppers ASAP

• 
  @DevonsGarage8 ай бұрын

  60k miles later and still waiting for it to break

• 
  @kevinjl22028 ай бұрын

  @DevonsGarage ... your very lucky Seen plenty of them.... it's not pretty

• 
  @DevonsGarage8 ай бұрын

  @@kevinjl2202 I could imagine that outcome, glad none of my friends or I ever had that problem. I always planned to do it as it looks weak anyway but I got a different truck recently. The Ram did great though on that setup for the 65k miles I had it

• 
  @Bigdaddyy699 ай бұрын

  before you regeared, did you have any flare between shifts? If so, did it go away when you put the 4.56's in?

• 
  @YippeeKyyay4 ай бұрын

  Every 68rfe has flare between shifts it’s how the transmission was designed.

• 
  @Bigdaddyy694 ай бұрын

  @@YippeeKyyay really? Interesting

• 
  @killitcrew9 ай бұрын

  Good video! Thanks

• 
  @TheHorsepowerHoff10 ай бұрын

  Could have been a 20 second video Stick to the repair Maybe start taking Ritalin just an idea

• 
  @DevonsGarage10 ай бұрын

  LOL sure thing. …except that this explains all that I went through to help with troubleshooting for someone else that could be going through similar.

• 
  @davidgomez511611 ай бұрын

  I agree with ya never understood why so many cars have a light and dark 2 tone interior. Why not all blacked out. Or all grey and let us choose one.