Beige to Black interior with Dying my Headliner!! (4th Gen RAM)
Full install video! (Interior tear down)
I've always hated the beige upper interior in my 2018 RAM 2500 Laramie so instead of buying a new truck, I changed all of it to black. I tried to get everything I could OEM while also dying my headliner with a fabric dye.
Want to do the same to your truck?
3:52 Dye Test
7:00 Tear Down
18:43 Prep for Dye
19:47 After Dye Application
23:15 Final Reveal
DYE:
64oz size (2 bottles, $199 total)
mashimarho.com/collections/bm...
INTERIOR PARTS:
I bought them from AllMoparParts.com HOWEVER as of 2021, many of the original part numbers are showing as discontinued but I will still post them below... remember this is for 2500 and 2500 CREW CAB trucks!
L A-Pillar $55.35 5LQ99DX9AC
R A-Pillar $48.28 5LQ98DX9AC
L B-Pillar $62.02 1MH97DX9AC
R B-Pillar $63.73 1MH96DX9AC
L C-Pillar $32.78 1DX61DX9AA
R C-Pillar $33.63 1DX60DX9AA
L window Trim: $23.60 1GD83DX9AC
R window Trim: $23.60 1GD82DX9AC
Rear coat hooks: $1.60 x 2 5VT85DX9AA
Rear Lamp dome: $104.03 5VT87DX9AA
Overhead console: $73.36 6AE51DX9AA
Seat belt cover $3.88 x 2 1DS78DX9AA
Seat belt slider $28.33 x 2 1HM16DX9AB
Sunvisor Left: $119.70 5VT89DX9AA
Sunvisor Right: $126.54 5VT88DX9AA
Sunvisor Clips: $2.00 x 2 5VT86DX9AA
Optional: (just changes the little top loop from beige to black, it was almost $450 with shipping for me so I decided not to)
L seatbelt ass $157.32 5KP99DX9AH
R seatbelt ass $157.32 5KP96DX9AI
Did not need for my truck specifically(already black):
Rear outer belt ass $139.08 x 2 5KS49DX9AB
Rear center belt plastic $23.09 5KQ41DX9AB
Official Instagram:
/ devonsgarage
Official Twitter:
/ devonsgarage
Main Insta:
/ devzw3
In this video:
Canon 6D mark ii
Canon EF 16-35mm F2.8L
Rode VideoMicro
Adobe Premiere CC
Пікірлер: 344
Maybe it was a little stiff because you didn’t use a fabric medium called GAC900. Super common, which holds the softness of fabric with the addition of dye
@DevonsGarage
3 жыл бұрын
This is very cool, I’ve never heard of that before but would definitely give it a shot next time around!
@osmairymedrano3581
3 жыл бұрын
Do you use the fabric medium before or after u apply the dye?
@ruleyboii4746
3 жыл бұрын
@@osmairymedrano3581 When mixing the paint/dye you want to mix in a 1:1 ratio of paint/dye and medium before applying to fabric
@witchcraftauto
2 жыл бұрын
I plan on doing my headliner too ,had no idea about this stuff either! Thanks for the heads up
@GodisGood941
2 жыл бұрын
Someone told me that u have to use something to brush/loosen the fiber in opposite directions with each coat to keep it oem soft. Otherwise the pant clumps on the fibers and hardens rather than evenly spreading across the whole thing
Holy crap that was crazy looks good I'm happy need to order another bottle just alittle short but thanks worked out great!!!
beautiful, doing this to my headliner once it gets warm again 😍😍😍
i’m so glad this video exists, made up my mind to do this on my 1500, already have all the paint and dye. Gonna start the process in a few weeks
What a transformation !! I love the way it looks man. I’m planing on doing the same thing to my power wagon. Except I’m going to be paining more trip pieces to keep the cost down. Thanks for taking one for the team and being the guinea pig 😂🤣
Im in the process of doing the same thing, Its coming along great, Awesome video too!
That looks amazing. I literally had the exact same idea of doing it, but everyone told me it was too stupid so I kind of forgot about it. I have a 1500 and in Europe the only 4th gens that came with a black headliner were the special editions Sports, Rebel, and Limiteds I believe. I have a regular blacked out Sport, and the beige interior made it look so much older. If I didn't already order a new one that comes with a black interior, I would've 200% considered this. It ended up looking absolutely amazing.
@ronniebenoit4081
2 жыл бұрын
Hey partner...don't let other people tell you what you want to do on your own vehicle. I'd burn mine to the ground if I thought it was a good idea 😁
New sub in the building with big 💪 support. Wow awesome job it looks amazing. I going to do this to my 2nd gen 1500. Thanks for sharing bro
Dude that’s one of the cleanest Dodges I’ve ever seen
Came out great! You’ve inspired me to do my truck now lol
Looks sick!! Nice job
Dope video man thanks for the inspo
You did an amazing job your truck looks good both on the in and out
I vinyl wrapped my Chrome door handles and every other little bit of Chrome in the cab also vinyl wrapped the gray bits on the dash I highly recommend it
Glad to see I’m not the only one who did this 👌🏼💯
@karenyoung5317
2 жыл бұрын
how's the dye holding up?
@C-Lawww
2 жыл бұрын
Great
Awesome transformation!! Wow! Definitely going to check this out for my 5th gen Ram 1500. I have that same tan headliner and don’t like it at all. Lol.
This was awesome I want to take my truck to you so you can do the same exact thing lol!
Nice job. I’d love to see how it held up 2+ years after you took this video
You can pull that headliner no problem. I pulled mine in my crew cab to do my starlight headliner without any issue just takes a little persuasion. The only trucks you have to take the glass out on are mega cabs because of the extra length and also you can do suede visors as well that’s what I don’t so everything matches
Don’t own a Ram but I can relate w/ the disgust on that two tone interior from my 2015 GM bro. GREAT video dude 👌🏽👌🏽👌🏽. U should make some gm ones I guarantee that’d be a major hit with how detailed your content is bro
@DevonsGarage
Жыл бұрын
Thank you a ton for this comment, this is such a huge motivator!
Sick truck
Wow you only have 400 subs, I’m surprised. You should have way more
Looks insane I wanna do mine
Nice truck by the way
wow super dope!
Man that looks great. I'm about to do the same thing to my 2020 Bighorn.
@MrTonyMontana1177
3 жыл бұрын
Dude I need a breakdown of all the parts you purchased in order to make this happen.
@197robust
3 жыл бұрын
@@MrTonyMontana1177 Check the description of the video, he listed all the parts and prices.
@MrTonyMontana1177
3 жыл бұрын
@@197robust Thanks!!!!
Looks really 👍I want to spray my headliner black but I'm wondering if I can tape up the lights, moon roof control n every thing else. I was gonna ask how to remove over spray by clay bar.
looks awesome! now replace that yellow dome light lol
I’m going to try this wish me luck 😂
Love it! I'm tryin to put lipstick on a pig of a kia sportage. I'd love a starlight headliner but I have the ugly beige of doom. First car, and an '05 so I wanna do it cheap. Luckily I should be able to take out the headliner so I don't get the overspray. Then of course the starlight conversion.
My 5th gen southwest 1500 has beige top head liner…not a fan so Im definitely redoing it in black
I did all the plastic parts, seat belts about 10 months ago just wasn’t sure if I wanted to dye it or replace the headliner due to having to remove the front glass. Glad this worked out for you as I will now try it.
@ray8380
3 жыл бұрын
What did you use to paint the plastic parts?
@bryancooper8201
3 жыл бұрын
@@ray8380 I bought all new plastic parts and seat belts. I would have bought new headliner but it was 1k and you gave to remove wind shield to replace which is why I’m looking at dying it.
@joeyphaze7509
3 жыл бұрын
@@bryancooper8201 where did you get all of your black trim pieces? Link if you’d be so kind please
@bryancooper8201
3 жыл бұрын
@@joeyphaze7509 www.ramforum.com/threads/black-interior-pieces-on-2016-rams.80931/ I ordered a lot from the dealer before I found this forum. This forum has links but if you don’t want to order from them you can use the part number. Hope this helps.
I absolutely want to do this with my jeep renegade. Having trouble finding the same dye that you used. Can you tell me where you found it at? Luckily for me, all the plastic is black. But the roof is stupid white. 🙄 NVM, I see that it's in the description 😂
This is a huge help! How's the smell? Does it linger in the heat?
Great video. I have a 2014 1500 tradesman and I can’t seem to find any of the black pillars. Even all the part out trucks I’ve come across have just beige. I’m getting close to just getting a can of spray paint from Walmart 😂😂
@DevonsGarage
6 ай бұрын
If you do get to where you just want to paint them as I’m sure the parts are getting hard to come by, they DO have a trim specific paint and I’ve heard very good things about it! I would give that a shot before just the generic spray paint. I want to say Rustoleum makes the trim paint but that’s just a guess, it’s been a while since I had seen a friend use some and it came out great!
How did it hold up? You still happy with it or would rather leave it alone if you could go back in time?
I have the same headliner in my 2016 ram sport and it fit out the rear door with the seats removed
Rit fabric dye does the same thing ..mix with hot hot water and sponge on . It’s also $3 a bottle . Don’t think you need it concentrated lol still came out nice
@DevonsGarage
2 жыл бұрын
This is good to know, might give it a try since it is easier to come by.. I will say the odd difference with this dye I used, it has some sort of rubber-like texture to it... not sure if that is the same with Rit
Where did you order the black parts? Want to do the same to my truck. The less I have to dye the better. Your Truck looks great
where did you buy all of your OEM black interior? I've looked all of the place but can't find anything.
Nice video, doing the same with my 2015, but also replacing the headliner.
@DevonsGarage
3 жыл бұрын
I will be doing the same. The dye was to sort of see how things go but I’d rather have it OEM no doubt! It’s just not the same
@ralfhiller9043
3 жыл бұрын
@@DevonsGarage hope I can get the headliner out without taking the glass out.
@DevonsGarage
3 жыл бұрын
Ralf Hiller that was my main reason for doing it the way I did... I called my local RAM body shop (the one the dealer uses) and they as well as the upholstery shop told me that’s the only way unless you fold it like a taco and it may retain the crease so I wasn’t down for that. And for the moonroof cover, the glass has to be taken out from the inside to then remove the cover from the roof. It all just sounded way too crazy just to make it black. So I am seeing how long I can handle the dye 😅 Another KZreadr was installing dynamat on his roof and even took out all the seats and said there’s absolutely no way to get it out unless the thing is folded or the glass is removed. Such a poor design. I guess this is the ONLY time having a Tundra would of been a benefit (full rear window movement)
@DL101ca
3 жыл бұрын
@@DevonsGarage why not remove the rear glass instead of the windshield ?
@DevonsGarage
3 жыл бұрын
@@DL101ca this is what I had thought of doing when I first heard of needing to remove glass however the glass replacement company said that my rear glass is a lot harder to remove with the power slider and everything vs the front windshield. I just took his word for it
which dye do you use. looks really good man.
Lots of great information in this video. 👍👍 At first I was unsure I could watch the whole video because it seems like a fairly straightforward job other than the painful part of Dying the roof lining ??? But, you took the time to explain everything perfectly that anyone could understand. Currently looking at buying a new RAM 1500. My only complaint is the Beige interior ??? I could buy the next model up with a Black interior, this would be my only reason ?? Thanks for taking the time to put this video together, making and editing videos can be fun. Although it can be very time consuming ???
@DevonsGarage
11 ай бұрын
I really appreciate this comment! Thank you a ton for the words! It was definitely a long video that I almost didn’t film or produce/finish but it turned out to be my most watched even with how long it is! Glad I could be of help!
Where did you buy your black interior pieces? I’m looking to do the same in my 11 3500
I been wanting to change mines to black
Would it have been a cleaner process if you had used a brush or sponge brush to spread it on ?
Would it be less messy to use a sponge, and dab the dye on..?
hey man , any chance you have links to all the black trim pieces, a b c pillar and etc. thanks man
I want to do this when I get my car but why not just spray the black spray over everything that was grey when you seen the spray worked instead of putting the black pieces on ?
Almost every non premium car has a light upper liner w black and ive always hated that. Of course if you opt for sport packages or higher end models they offer black headliners. I wish it was more of an option on your regular non-luxury non-sporty cars
you should do a update video on your thoughts so far and the quality of it now that time has passed
@DevonsGarage
3 жыл бұрын
Hands down I still HIGHLY recommend this dye, no fading, no discoloration, has been standing up very well 🤘🏻
Where did you order all of your black interior stuff from?? Bc I want to do the same thing
@DevonsGarage
3 жыл бұрын
In the description now 🤘🏻
Do you have any reccomendations on changing my dashboard color? It’s a plastic and it’s the gross tan/grey/beige color, but four different variants 😭😭
I used to do upholstery work and if you take out the seats you can get the headline out without taking out the window and you could have dyed the plastic pieces to save a little money
@DevonsGarage
3 жыл бұрын
Only way to take out the headliner with removing the seats is folding it like a taco. I even asked someone who just redid the headliner and that is exactly what they had to do as well without removing the windshield. I did not want to fold mine. I was told by ram and 3 upholstery shops that unless you fold it, there is no other way than to remove glass. Ram installs them without the glass in when made. And I didn’t go with dye because it wears off of the “usual touch” spots. I looked into this for a while before spending the huge chunk of change and the ultimate “wear and tear proof” way was to buy the black plastic. But I definitely agree that other methods could be done, I just wanted to do it the most OEM and least damage to any existing parts (kinda messed up on that one with my over spray but I got that off lol)
@brandonhunt5804
3 жыл бұрын
Hey Gene- is the process the same for dying the plastics? Spray and let it dry? What's suggested prep-wise? Any clear coat or anything after dying the plastics? Thanks!
@KDlGG
3 жыл бұрын
@@DevonsGarage check 6.7 limes video. He removed it without folding on a 4th gen
I’ve been trying to find a video to replace the interior with out paint but with cloth interior
How has this held up over time?
Where did you source all of the interior plastics?
What I will never understand is when vehicle manufacturers design two of the same car with opposite trim designs. For example my 2005 Cobalt (Don't roast me pls) has some black trim and mostly beige for the interior, GM also made cobalts with black headliner and pretty much all of the trim that I have beige as black and all of the trim that I have black as beige. Just, why? Anyways, enough ranting. Time to dye the headliner :) Edit: 560th sub 🔥 Also just a quick tip for anybody struggling with interior trim removal, if you know there are no screws pull sharply, if you pull the trim out too slow you can risk cracking clips
@DevonsGarage
3 жыл бұрын
I definitely agree, thanks for the sub and helpful tips! And I second on the *make sure there aren’t any screws or pre-removable clips* before pulling 👌🏻😉
What was your cost for all the plastic parts?
I spent $75 on vinyl and fabric spray paint, came out really well and a lot cheaper than buying oem black parts. They hold up to scratches and dents as well.
@DevonsGarage
2 жыл бұрын
That was going to be my next option if I couldn’t get the black plastics. But I wanted an OEM look and wanted all the wear areas to be black at all times. Either way though, the cost is definitely way greater than doing an overlay so I think that’s actually a pretty cool idea!
@What_iv_Don3
2 жыл бұрын
@@DevonsGarage Believe it or not, they look oem. It goes down into the groves and makes it look factory sprayed. Still has the original texture and everything.
@DevonsGarage
2 жыл бұрын
@@What_iv_Don3 oh no way? Do you have an instagram by chance? I’d love to see some photos of that if you were to send me a DM. Or email if you don’t. Very interested in seeing that option for future vehicles where black plastics don’t exist lol
@What_iv_Don3
2 жыл бұрын
@@DevonsGarage _aaron_plank_, dm me and I'll send some pics. I did some yesterday and doing the rest of the grey in a few days (including door panels and a few other harder to get to trims)
@What_iv_Don3
2 жыл бұрын
@@DevonsGarage did it on a friend's car 3 years back and it's all holding really well.
hows this holding up a couple years later ?
Duplicolor vinyl and fabric flat black should help get rid of that crease that was in the one black pannel
Came out really great! What % tint do you have? It looks so stealth and clean
@DevonsGarage
Жыл бұрын
Thanks a ton! I had 5% all around except the windshield where I just had a 5% visor
Instead of buying new plastic pieces. You could have purchased black trim spray paint from auto zone and saved alot of money. My whole interior ( including door panels ) were that beige color , and it came out awesome ( except for the liner ).. but I'm going to purchase that dye and do it also. How much dye did it take to do just the headliner ?
@tbelliveau3312
Жыл бұрын
How is the trim holding up?
@kalebwestover9329
Жыл бұрын
How’s the trim look now?
@jasonherwig7907
Жыл бұрын
@@tbelliveau3312my buddy did it about 2 years ago and none of it has peeled except one piece and that’s because he did one coat on it. the rest he did three coats
@jasonherwig7907
Жыл бұрын
@@kalebwestover9329look below
Where are you located? And do you do this to other trucks. Price????
Great video... my 15 2500 is identical, black interior and beige ceiling and trim and it drives me nuts. I was skeptical about dying it but now I'm beyond ready. Thanks 🤣
@brentonarceneaux6108
2 жыл бұрын
What color black did you paint the plastics? Hard to see in video, do they match well. Also would you recommend different color or texture black to match better?
what spray did you use 💨 🖤🖤🖤 ?
I did mines before with spray can black and brushed it in and it was not stiff mind u I use spray can
For the white crease on your back seat belt pannel hit it with a heat gun and it will remove the white just be careful as you do it. KZread is your friend great work too bad many of these pieces are coming up as discontinued, would love to do this to my Sport
@DevonsGarage
3 жыл бұрын
Yeah I just recently found out about the discontinuation with another commenter. I’m in the process of trying some plastic dies on my old plastics to see if anything lasts or holds the color well so that I can still help the community with a solution. I appreciate the tip for the crease! I didn’t even think of that but I definitely agree that it will work!
What type of paint did you use?
How long does it take to dry?
What site did you get these pieces from??
Yo where do I buy the black die looks great lol friends said I was nuts buying all new black parts I love it now I need to do headliner and just the seatbelts
@DevonsGarage
3 жыл бұрын
I actually got the die from Mashimarho(dot)com and it’s called: Black Headliner/Carpet Dye for $99. I ordered the 64oz size (two bottles) for a total of $200 and it worked out pretty much perfectly 👍🏻
Are the part numbers the same for 1500?
can use the simili leather for car ceiling ? thank you
Awesome video bro thank you I was able to get all the part numbers except the headliner parts hooks rear and front light bezel and front seatbelts do you happen to have that part number ? Thank you In advance
@DevonsGarage
3 жыл бұрын
Rear coat hooks: $1.60 x 2 5VT85DX9AA Overhead console: $73.36 6AE51DX9AA L seatbelt ass $157.32 5KP99DX9AH R seatbelt ass $157.32 5KP96DX9AI
You did a Great Job God Jesus Bless You and Your Family
Did the dye have an odor or anything and do you think there’s a better way to apply it to the headliner like maybe with a brush or dipping a rag into the dye and applying it like stain?
@DevonsGarage
3 жыл бұрын
I think the spray method keeps it pretty uniform but I would definitely be interested in an easier application as it gets messy. Now for odor, none whatsoever. I’ve actually had worse odor from the headliner glue at a shop rather than this dye. It smelled of nothing at all 👍🏻
What did you use. Sorry if I missed it
Did you unplug the battery while changing that pillars? And the headliner? Or no?
@DevonsGarage
11 ай бұрын
No, I left the battery connected, but being so close to the curtain airbags if someone isn’t used to working near them, it wouldn’t hurt to disconnect the battery for an extra layer of safety
That’s sick man Was there a smell? Lol
@DevonsGarage
2 жыл бұрын
No smell at all from the dye 👍🏻
What dye did you use for this ?
How much did you spend on all the plastic s ?
There's several guys on youtube who to ok out "All" the seats and the console. And the headliner comes out the back door. And no they didn't "bend it like a taco". Takes patience like tetris but it can be done. 😂
@DevonsGarage
3 жыл бұрын
Hmm interesting because I haven’t found a single video on a crew cab being able to do this. Also 4 professional shops including the dealers body shop all said this has to come out of the window without folding the liner “like a taco” and I would have no problem whatsoever taking out ALL seats and middle console but as a guy did here on KZread, it still would not fit out of any door without folding. I also had a guy reach out to me on Instagram and his upholstery shop folded his in half to remove it as well. Luckily he said there is no damage and it looks good for now 👍🏻
@saddawgy
3 жыл бұрын
@@DevonsGarage kzread.info/dash/bejne/oothz5qjpLCnZrA.html
@saddawgy
3 жыл бұрын
@@DevonsGarage kzread.info/dash/bejne/pmWolNqLZdKqmdI.html
@saddawgy
3 жыл бұрын
@@DevonsGarage Get it the best way you know how man. I'm not trying to come at you wrong. I have love for all my RAM brothers! I'm not saying you're wrong I don't wanna destroy my vehicle doing upgrades either. So I don't blame you for being cautious.
@DevonsGarage
3 жыл бұрын
@@saddawgy it wasn’t even just that, it is impossible without folding for this model/gen truck. At least from every professional shop. I would of done ANYTHING to do it without removing the glass or folding the liner. But in this gen crew cab 2500, any person I’ve talked to so far has gotten it done by folding it 🤷🏻♂️ idk beats me. The first video you put is a 5th gen and the second video is a 1500, I’m not sure if there is any difference and I’m not upset or trying to talk you down, just that as of this moment, no one has a video showing the physical removal and I’m thinking it’s because they don’t want the hate for folding the liner. I have 100% honestly talked to 4 professionals and 2 out of state people from this video that have all folded the liner to remove. I’m just trying to give a heads up to people out there with this truck which I am sure you are as well. Honestly I may even eventually get bored enough and attempt it. On camera. Just for fun.. the entire start to end on removing it. I didn’t believe the information either until even my glass guy said he gets a lot of calls for this method of removing the window for the upholstery shops that he charges $100 flat rate. I promise though man, All love and hell yeah to the RAMs!🤘🏻😎
Hey, what dye did u use?
Where did you get the headliner dye from? I really want to do this to my 2500
@DevonsGarage
3 жыл бұрын
Located in the description now! 🤘🏻
Would this work in the intior seats?
What type of dye did you use
I wanna do this because it will hide the waters stains on my seats.
I’m about to buy a 5th gen Camaro & the only downside about the car is that it’s tan on the inside. I’ve watched this vid so many times & i was just wondering if you’d recommend me doing this ? & how well did it hold up ?
@DevonsGarage
Жыл бұрын
I wish I still had the truck to give you a definite 3 year update, but I can say that in the time I had it, it lasted with no issues whatsoever. I don’t see it fading or anything either since it’s not in direct sunlight. I would love to try again with using the stuff before hand that someone mentioned in the comments (it’s one of the highest liked comments) that will keep the headliner soft rather than get stiff and see how that works as well. As for all the plastics, you can either use a plastic trim paint (still have yet to try that) or probably could spend some $$$ and find black OEM plastics from say an SS or so? That’s just my assumption though
do you happen to have the factory part numbers you ordered?
@DevonsGarage
3 жыл бұрын
Located in the description now! 🤘🏻
I ended up using the duplicolor vinyl and fabric spray for the sun visers and plastics turned out great and it was only 9$
@DevonsGarage
2 жыл бұрын
I’ve wondered about that spray for a long while.. did you do the handles? Would love to know how it keeps up with use (being serious). I always wondered if it would flake or peel off/get scratched
@diegoh3713
2 жыл бұрын
@@DevonsGarage well I have a regular cab so it only has the one handle but it just comes down to the prepping the surface , I just used an all purpose cleaner beforehand and It turned out great should hold up for a while I have pics if you wanna see the results
@DevonsGarage
2 жыл бұрын
@@diegoh3713 yeah man I’d love to! If you use Instagram, I’m @devzw3 or @devonsgarage, shoot me a pic or so! Would be awesome to see what other options are out there
@capo5582
2 жыл бұрын
@@diegoh3713 how’s it holding now
@alexl710
2 жыл бұрын
How’s it holding?
Did you ever compile a parts list for this project?
@DevonsGarage
4 ай бұрын
Yes, located in the description under the video 👍🏻
Where did you get your driver side visor and black parts?
@DevonsGarage
3 жыл бұрын
allmoparparts(dot)com and I have a full parts list on a reply to a comment on here
Yeah, just notice the comment below but I wanted to ask the same thing.... How's it holding up!?? Jus' fukken gorgeous!
@DevonsGarage
3 жыл бұрын
Been looking awesome as day one! I absolutely love it to this day 🤘🏻
Can you link the dye used.
That looks great !!! 👍 Where did you get the fabric dye from ?
@DevonsGarage
3 жыл бұрын
Here’s the dye, I used 2 bottles for my truck which turned out to be the 64oz option mashimarho.com/collections/bmw/products/new-black-headliner-carpet-dye
What's the brand of Dye
does the dye work on caroet
I agree with ya never understood why so many cars have a light and dark 2 tone interior. Why not all blacked out. Or all grey and let us choose one.