What trailer do you have that on that it sits so low. My waverunner sits super high on the trailer
@SimicBros17 күн бұрын
They are on a jetski dolly which makes it sit lower and take up less space in the garage
@johnwathen8804Ай бұрын
Is the spark plug opening a “tube” so that any fumbles stay in the tube or are you screwed…
@nemoromero61792 ай бұрын
DONT add in all the oil thats in the kit. Your manual will tell you how much oil to add (with or without oil filter change) when finished your oil level should be between the min and max markers on the dipstick. Great video.
@courtneydalton44063 ай бұрын
Thanks guys 🙏🏼. Is there a torque setting for the plugs?
@SimicBros3 ай бұрын
We typically hand tighten them. There is a torque spec for them - 25Nm / 18 ft-lb
@railrider14224 ай бұрын
Thanks - good video
@marmadukewynn98264 ай бұрын
😢 *PromoSM*
@raylamarche26885 ай бұрын
I think he had it wrong. Clockwise will raise the belt.
@emotionalnugget4335 ай бұрын
omg u ride so gooood
@milk77195 ай бұрын
Weighing in 226
@majesticzealous3695 ай бұрын
ily
@rdbetta5 ай бұрын
Most fun and practical ski NO DOUBT i have a 2023 trixx 3up excellent perfectly garage maintained i live in Pennsylvania lehigh valley area let me know if your are interested
@kutuq276120 күн бұрын
Where do you ride it ? Most of the rivers won’t allow in Lehigh valley
@ltfirefighter5 ай бұрын
Great video the only thing that's incorrect is the placement of the clip. The clip should be on the opposite side of the latch where you see two little raised plastic lines with a space going across the both of them. The round end of the clip sits in that space. The large round part does not sit around the latch, the open end of the clip does. That puts pressure on the latch and allows it to turn into the stops... If that makes any sense. I wish there was a way to attach a picture.
@witnessprotectionforwhat17555 ай бұрын
Really good video, only thing I think would be good for your channel if you take more “uh” and “um” out it would I make it sound a little better
@s.douglas95315 ай бұрын
I couldnt watch more than 30 seconds bc of the “ahhs” and “umms”.
@witnessprotectionforwhat17555 ай бұрын
1:26 uhhh so what happened is I’m not sure what happened 💀
@rodbk5 ай бұрын
yur
@bigboynicolas16175 ай бұрын
I would definitely pipe NGL
@milk77195 ай бұрын
Editor needs a raise what a great video 👍🏿
@BGUFF5 ай бұрын
Installed this on my sled but have no power at the USB ports. Is there a fuse or a trick to get it working?
@SimicBros5 ай бұрын
For us, after the installation, we turned the snowmobile on (turned the engine on) and plugged in a phone and worked perfectly. You should check if you plugged the correct wire to each connection (negative to negative) and (positive to positive). There also may be a fuse but for us it worked without having to do anything else but the installation
@BGUFF5 ай бұрын
@@SimicBros do you know where the fuse panel is? Usually it’s near the coolant overflow bottle but I cannot locate it anywhere
@SimicBros5 ай бұрын
What year and model is your snowmobile?@@BGUFF
@ultralightflyer98495 ай бұрын
Excellent tutorial. Thanks.
@mystic-16 ай бұрын
what does cc mean on my snowmobile?
@SimicBros6 ай бұрын
CC typically refers to the displacement of the engine. It is a smaller measurement used on these types of recreational vehicles because of their small engine displacement. This is an example in simple terms. Litres or “L” is used as a measurement for car engines because of their tendency to have larger engines. This Litre “L” is the sum of all the air that can fit into each cylinder. Snowmobiles on the other hand have smaller engine sizes and because of that uses a smaller measurement unit called CC. CC’s deliver the same information on the engine size but in a different and smaller measurement.
@mystic-16 ай бұрын
@@SimicBros oh okay I'm having a hard time finding a level place to change my oil because I dont have a garage I was thinking of changing it outside with all that snow but use a shovel to shovel the snow where the bottom part is hahaha idk
@pcmetro23ify6 ай бұрын
Great video, exactly what I was after, nice job.
@adenfresh92076 ай бұрын
Drop the link for the Surf-Dek foot mats
@SimicBros6 ай бұрын
We got them from SC Wake. This link is the exact ones we purchased. But make sure you choose the correct model for your Jet-ski scwake.com/product/sea-doo-spark-trixx-2-up-traction-mats/
@WrestlingUntamed7 ай бұрын
Hi, what is the size for the screws for oil filter housing, thread pitch, how long it is and size of the torx? Thank you.
@SimicBros7 ай бұрын
We use an 8mm socket, any length should work for the screw.
@kevinp172726 күн бұрын
It requires an E8 External Torx socket.
@OwenRozeboom7 ай бұрын
Anyone ever been able to wheelie a 900 ace? I have the 2017 enduro and I haven’t been able to. Maybe I just need some suspension adjustments?
@SimicBros7 ай бұрын
Its difficult to wheelie the 900 ace because of the power-weight ratio as well as the torque. It doesn't have enough torque and a long enough track with deep lugs (paddles) on the track to be able to wheelie it. It may be possible with adjustments to the suspension but I don't believe it would work.
@OwenRozeboom7 ай бұрын
@@SimicBros I figured. Thanks.
@user-xs6sj4qh8x7 ай бұрын
Do you have a link for the glovebox extension. The one I ordered doesn’t fit, my sled is the same as the one in the video
@islandman58028 ай бұрын
11:05 The 900 ACE actually takes 3.25 to 3.5 quarts, not 2.5 quarts. The kit comes with 3 1/2 quart jugs.
@firedawg19988 ай бұрын
I love reading all the kiddie commemts about how he did this wrong, just suck it out, lol. This is totally the way to do it. It gives u a chance to do it properly. You can inspect all your clamps and grease the shaft. Also find leaks and other concerns along fhe way... sure, if its just a quick mid season oil change then giver, but this folks , is the way!
@saffaseraj8 ай бұрын
The Yamaha WaveRunner GP1800R, 2023 model has a bridging plastic support (cross brace on the middle) (when the seats are removed), which is passed over the engine cover. I removed the engine cover and three of the spark plugs, but the one which is under the bridge and socket wrench, with any adaptors I tried, I cannot unscrew the spark plug, and I'm in severe trouble cause my socket and extension in stuck inside and I can neither unscrew the spark plug nor remove the extension and socket! I thought of removing the seat supports around with all its screws, but...uh!!! WELCOME TO THE WORLD!!! PLEASE HELP, PLEASE PLEASE
@rodbk8 ай бұрын
👌
@milk77198 ай бұрын
YOU ABSOLUTE BEAUTY
@emotionalnugget4338 ай бұрын
absolute beut u scrumptius canadian
@emiledaudet52559 ай бұрын
Good review and editing, keep making videos, you're good at it.
@ryanconn27619 ай бұрын
Good video, does anyone know if Ryco make a direct oil filter replacement for the Yamaha one?
@brockb44529 ай бұрын
I’ve heard of spraying the inside holes with some kind of spray- what’s this about?
@SimicBros9 ай бұрын
We haven't heard about spraying anything into the Spark Plug hole, You may be talking about spraying something like carb cleaner to take out debris. But we personally don't spray anything, we just replace the spark plugs and thats it
@brockb44529 ай бұрын
@@SimicBros what about marine grease or dielectric grease? Nothing like that either? I Just bought a new fx svho so I’m making sure I’m covering everything I need for maintenance supplies
@farrtp294 ай бұрын
When winterizing, some will spray fogging oil into the cylinders to prevent condensation/rust over the winter. I just sprayed fogging oil into the throttle body on mine until it stalled. First year with mine. Can't wait for spring!
@brockb44529 ай бұрын
I’ve added this video in my go-to follow-alongs as a first time 2024 fx cruiser svho owner. Thanks!
@latamexports963710 ай бұрын
u need to warm up the engine first before doing an oil change then start the engine and measure it when the engine is warm otherwise would give wrong oil measurement
@dmihovilovic4 ай бұрын
Why does it matter giving that you are going to replace all oil anyways?
@Thesocialgarage10 ай бұрын
Pro tip, hold your oil can the opposite way, hole on top, and the oil will pour smooth instead of glugging.
@davidatwell528211 ай бұрын
Great video, When you replace the oil filter and new oil, the dipstick level won't be accurate until you run the engine to get the oil into the new oil filter.
@johnniemeyer313911 ай бұрын
Great video
@gabesoutdooradventures637711 ай бұрын
I'm thinking about buying a skidoo spark 3up this summer or next. Thoughts?
@SimicBros11 ай бұрын
I think its a great idea, we love our spark trixx. I would ask though, what are you going to be using it for. Like riding with 2/more people, riding on the ocean or lake. Things like that
@gabesoutdooradventures637711 ай бұрын
@simicbros3951 mostly lake riding with family and friends. Liking the 3up option as it has more weight capacity for multiple people on it at same time.
@gabesoutdooradventures637711 ай бұрын
@simicbros3951 also could you make a video sometime about maintenance required for new jetski owners? I can't seem to find any good videos like that.
@SimicBros11 ай бұрын
@@gabesoutdooradventures6377Sounds like the spark 3up would be perfect. I would suggest before buying, go rent one so you can get the feel and see if you fully like it
@rdbetta5 ай бұрын
@gabesoutdooradventures6377 I have a 3p trixx In flawless condition and I want to sell it I am in PA lehigh valley are let me know if you are interested
@emotionalnugget43311 ай бұрын
oooooh yea bud just bought my seadoo cuz of u
@milk771911 ай бұрын
Ewwww Buddy
@rodbk Жыл бұрын
🔥🔥🔥
@milk7719 Жыл бұрын
Oh Eh?
@daniellacassaro8659 Жыл бұрын
ok lucas
@jamesalmeida9285 Жыл бұрын
lucas rlly became the main character
@jamesalmeida9285 Жыл бұрын
beautiful video
@bogoff99 Жыл бұрын
hi.. you looked like you just ripped your seat up.. you know it's a matter of lifting the tab at the back and slide the seat back.. plus oil change can be done without removing the top deck. Good video in general tbf
@mitty7578 Жыл бұрын
Nice video guys. Clear and concise.
@seanalmeida9191 Жыл бұрын
The second guy needs more video appearances he tuff Fr Fr
Пікірлер
What trailer do you have that on that it sits so low. My waverunner sits super high on the trailer
They are on a jetski dolly which makes it sit lower and take up less space in the garage
Is the spark plug opening a “tube” so that any fumbles stay in the tube or are you screwed…
DONT add in all the oil thats in the kit. Your manual will tell you how much oil to add (with or without oil filter change) when finished your oil level should be between the min and max markers on the dipstick. Great video.
Thanks guys 🙏🏼. Is there a torque setting for the plugs?
We typically hand tighten them. There is a torque spec for them - 25Nm / 18 ft-lb
Thanks - good video
😢 *PromoSM*
I think he had it wrong. Clockwise will raise the belt.
omg u ride so gooood
Weighing in 226
ily
Most fun and practical ski NO DOUBT i have a 2023 trixx 3up excellent perfectly garage maintained i live in Pennsylvania lehigh valley area let me know if your are interested
Where do you ride it ? Most of the rivers won’t allow in Lehigh valley
Great video the only thing that's incorrect is the placement of the clip. The clip should be on the opposite side of the latch where you see two little raised plastic lines with a space going across the both of them. The round end of the clip sits in that space. The large round part does not sit around the latch, the open end of the clip does. That puts pressure on the latch and allows it to turn into the stops... If that makes any sense. I wish there was a way to attach a picture.
Really good video, only thing I think would be good for your channel if you take more “uh” and “um” out it would I make it sound a little better
I couldnt watch more than 30 seconds bc of the “ahhs” and “umms”.
1:26 uhhh so what happened is I’m not sure what happened 💀
yur
I would definitely pipe NGL
Editor needs a raise what a great video 👍🏿
Installed this on my sled but have no power at the USB ports. Is there a fuse or a trick to get it working?
For us, after the installation, we turned the snowmobile on (turned the engine on) and plugged in a phone and worked perfectly. You should check if you plugged the correct wire to each connection (negative to negative) and (positive to positive). There also may be a fuse but for us it worked without having to do anything else but the installation
@@SimicBros do you know where the fuse panel is? Usually it’s near the coolant overflow bottle but I cannot locate it anywhere
What year and model is your snowmobile?@@BGUFF
Excellent tutorial. Thanks.
what does cc mean on my snowmobile?
CC typically refers to the displacement of the engine. It is a smaller measurement used on these types of recreational vehicles because of their small engine displacement. This is an example in simple terms. Litres or “L” is used as a measurement for car engines because of their tendency to have larger engines. This Litre “L” is the sum of all the air that can fit into each cylinder. Snowmobiles on the other hand have smaller engine sizes and because of that uses a smaller measurement unit called CC. CC’s deliver the same information on the engine size but in a different and smaller measurement.
@@SimicBros oh okay I'm having a hard time finding a level place to change my oil because I dont have a garage I was thinking of changing it outside with all that snow but use a shovel to shovel the snow where the bottom part is hahaha idk
Great video, exactly what I was after, nice job.
Drop the link for the Surf-Dek foot mats
We got them from SC Wake. This link is the exact ones we purchased. But make sure you choose the correct model for your Jet-ski scwake.com/product/sea-doo-spark-trixx-2-up-traction-mats/
Hi, what is the size for the screws for oil filter housing, thread pitch, how long it is and size of the torx? Thank you.
We use an 8mm socket, any length should work for the screw.
It requires an E8 External Torx socket.
Anyone ever been able to wheelie a 900 ace? I have the 2017 enduro and I haven’t been able to. Maybe I just need some suspension adjustments?
Its difficult to wheelie the 900 ace because of the power-weight ratio as well as the torque. It doesn't have enough torque and a long enough track with deep lugs (paddles) on the track to be able to wheelie it. It may be possible with adjustments to the suspension but I don't believe it would work.
@@SimicBros I figured. Thanks.
Do you have a link for the glovebox extension. The one I ordered doesn’t fit, my sled is the same as the one in the video
11:05 The 900 ACE actually takes 3.25 to 3.5 quarts, not 2.5 quarts. The kit comes with 3 1/2 quart jugs.
I love reading all the kiddie commemts about how he did this wrong, just suck it out, lol. This is totally the way to do it. It gives u a chance to do it properly. You can inspect all your clamps and grease the shaft. Also find leaks and other concerns along fhe way... sure, if its just a quick mid season oil change then giver, but this folks , is the way!
The Yamaha WaveRunner GP1800R, 2023 model has a bridging plastic support (cross brace on the middle) (when the seats are removed), which is passed over the engine cover. I removed the engine cover and three of the spark plugs, but the one which is under the bridge and socket wrench, with any adaptors I tried, I cannot unscrew the spark plug, and I'm in severe trouble cause my socket and extension in stuck inside and I can neither unscrew the spark plug nor remove the extension and socket! I thought of removing the seat supports around with all its screws, but...uh!!! WELCOME TO THE WORLD!!! PLEASE HELP, PLEASE PLEASE
👌
YOU ABSOLUTE BEAUTY
absolute beut u scrumptius canadian
Good review and editing, keep making videos, you're good at it.
Good video, does anyone know if Ryco make a direct oil filter replacement for the Yamaha one?
I’ve heard of spraying the inside holes with some kind of spray- what’s this about?
We haven't heard about spraying anything into the Spark Plug hole, You may be talking about spraying something like carb cleaner to take out debris. But we personally don't spray anything, we just replace the spark plugs and thats it
@@SimicBros what about marine grease or dielectric grease? Nothing like that either? I Just bought a new fx svho so I’m making sure I’m covering everything I need for maintenance supplies
When winterizing, some will spray fogging oil into the cylinders to prevent condensation/rust over the winter. I just sprayed fogging oil into the throttle body on mine until it stalled. First year with mine. Can't wait for spring!
I’ve added this video in my go-to follow-alongs as a first time 2024 fx cruiser svho owner. Thanks!
u need to warm up the engine first before doing an oil change then start the engine and measure it when the engine is warm otherwise would give wrong oil measurement
Why does it matter giving that you are going to replace all oil anyways?
Pro tip, hold your oil can the opposite way, hole on top, and the oil will pour smooth instead of glugging.
Great video, When you replace the oil filter and new oil, the dipstick level won't be accurate until you run the engine to get the oil into the new oil filter.
Great video
I'm thinking about buying a skidoo spark 3up this summer or next. Thoughts?
I think its a great idea, we love our spark trixx. I would ask though, what are you going to be using it for. Like riding with 2/more people, riding on the ocean or lake. Things like that
@simicbros3951 mostly lake riding with family and friends. Liking the 3up option as it has more weight capacity for multiple people on it at same time.
@simicbros3951 also could you make a video sometime about maintenance required for new jetski owners? I can't seem to find any good videos like that.
@@gabesoutdooradventures6377Sounds like the spark 3up would be perfect. I would suggest before buying, go rent one so you can get the feel and see if you fully like it
@gabesoutdooradventures6377 I have a 3p trixx In flawless condition and I want to sell it I am in PA lehigh valley are let me know if you are interested
oooooh yea bud just bought my seadoo cuz of u
Ewwww Buddy
🔥🔥🔥
Oh Eh?
ok lucas
lucas rlly became the main character
beautiful video
hi.. you looked like you just ripped your seat up.. you know it's a matter of lifting the tab at the back and slide the seat back.. plus oil change can be done without removing the top deck. Good video in general tbf
Nice video guys. Clear and concise.
The second guy needs more video appearances he tuff Fr Fr