I use an olfa HD with the plastic stripped off. I put a piece of reflective tape on it, cos it's very slim and easy to lose. Only downside is that the blade can slide out the back if it's loosened because the stop was on the plastic.
@caramelzappaКүн бұрын
If you use your olfas with the blades extended you should really check out the Knipex one. They have a spine that can be extended to support the blade which makes it way better to use with longer extensions. Nice video. I think I'll pick one up. But there's definitely a bunch of things I wish were done differently. Might try to develop my own 18mm version.
@DOC195813 күн бұрын
Just assembled mine today (in Australia). Well made, but needs owner to tidy up to their own specs. Good job AvE.
@BaddAtom4 күн бұрын
using it will make it worn in
@BaddAtom4 күн бұрын
bought and used everyday at work, it only gets better. mine is butter smooth i love it
@AntonioClaudioMichael5 күн бұрын
Nice Clean up I think its a nice Knife
@DG8RS6 күн бұрын
I placed my order in April and it still hasn't shipped. I've now lost 3 finger-like appendages because I'm using a chainsaw to open my packages. GET HERE YOU CANADIAN BASTARD! 🤣
@koga73498 күн бұрын
Is there a 3d printable version?
@mitchcumstein98088 күн бұрын
This type with break off blades are garbage. Not one have I ever owned dies the blade break properly
@Monkstameth9 күн бұрын
Just a blonde-one o' play at the business end there...
@scottsutherland74269 күн бұрын
Not opening package with chainsaw = major fail
@krismorey11 күн бұрын
I wonder when mine will come, its been a month since i ordered.
@fromthebackyard241510 күн бұрын
Mine took about a month maybe more
@darikdatta11 күн бұрын
Mine just shipped and you got yours a month ago? What incestuous tricks did you have to play for such favor?
@y0ur_name_here12 күн бұрын
If you have an auto tumbler with appropriate media it will put a perfect finish on the material and save almost all that sanding. I say almost as it will still need fine tuning here & there. Fantastic tool.
@MrM1CHA3L12 күн бұрын
Still Waiting for mine, in aus
@RandomGuy098712 күн бұрын
I just got mine in the mail, I think of it more like merch but instead of a novelty t shirt its a tool I can use to cut boxes.
@choke66612 күн бұрын
I bought the double bit pencil topper. Badass as all hell! I cant do much with it.. but thats besides the point.🫡
@scofab13 күн бұрын
I flushed and polished my outer edges too, came out really nice. You can also easily flush the protruding screws too, that's what I did. Finally slightly rounded and polished the corner edges, feels great. Well done and regards.
@alterdcustomrc451215 күн бұрын
You needed more heat. Thank you for sharing
@ccubsfan9424 күн бұрын
You could probably overlay random audio from his channel it'd somehow make sense.
@PuppetNerd27 күн бұрын
I know he said 4-6 weeks. But did anyone get a tracking number?
@fromthebackyard241527 күн бұрын
You have to get the “shop” app. It’ll notify you when it ships
@PuppetNerd27 күн бұрын
@@fromthebackyard2415 I have it. No updates on this order.
@m5nut28 күн бұрын
Just got the email an hour ago to say my knife has shipped, WOOHOO! Thanks for the assembly tips....and only for a second.
@dennisyoung463129 күн бұрын
Was “cooking” an SL175 (twin) cylinder @ 300f after applying Gun-Kote, and the liners *slid* out. Pushed them back in with gloved hands.
@NeverMetTheGuy29 күн бұрын
I've got a sneaking suspicion that you're going to get quite a few views on this; it popped up, and I'm not even looking for it.
@DIRTVENTURE29 күн бұрын
I’m still waiting on mine to shore up
@barrylinkiewich9688Ай бұрын
As a laser operator I see things about how this kit was cut that kinda grate against my standards. The cut lead-ins (little divots on the side of the parts) should have been on an inside facing edge or the end of the part and the bridges on the two spacers could have been much thinner for easier cleanup. Speaking of clean up, the operator could have gave the parts a gentle wipe when the slag was hot and it mostly would have brushed off, or refine the cut to reduce how much is produced in the first place. Whining aside, you've done a great job cleaning it up and I love the idea of the knife but these small changes wouldn't have cost any production time to result in a better finished product.
@jcoul1scАй бұрын
Mine came in bubble wrap, interestingly
@travisk5589Ай бұрын
Its like building a model as a kid. You more time that you spend prepping each part before assembly, the better the completed product is.
@lspringerjonesАй бұрын
A thing of beauty is a joy to behold.
@lazerusmfhАй бұрын
I prefer a carpet knife personally
@peterrenn6341Ай бұрын
Who else was shouting "FOCUS YOU F***!" 😀
@electroluxladАй бұрын
I’m having a problem where I live I can’t find the blades
@fromthebackyard2415Ай бұрын
I’ve never seen them in stores around me. I order them online. 25mm or 1” snap-off blades
@lindboknifeandtoolАй бұрын
I just learned I had to confirm order number with phone number… I hope I end up with one… I ordered the instant they were available.
@TheHighpotinuseАй бұрын
Thank you for not showing your vice.
@81fiveАй бұрын
I like that you gave it a fair shake... it's nice to see constutive criticism without totally bashing.. good video. And yes I like AVE.
@therealidaho6094Ай бұрын
Absolutely love ave. Could not be more happy seeing an honest tool review. That's the reason we watched ave 2 start with. Good job on your review.
@craigpreston8260Ай бұрын
I bought one too and agree with most of your observations I enjoyed the assembly and cleanup part
@richardbarnes4699Ай бұрын
I'm still waiting on mine.
@Torgo63Ай бұрын
Great Video, thank you. Great description of how someone who uses these knives often evaluates them. I'm just using it to cut up boxes, and I realize I'm way overpaying, but I don't mind supporting a YT channel that I've enjoyed watching for a long time makes it worthwhile (I have no use for stickers, mugs, etc.)
@boppinsАй бұрын
Looks cool but too much play for me.
@davidfrombrisbane1144Ай бұрын
Utility….no.
@pgtool3047Ай бұрын
Great clip. Thank you. Would the outside layered edges turn out better if the bulk of the edge sanding was done after assembly? I will try that.
@Domester101Ай бұрын
Is it the best knife, no. Is it cool as hell, yes. does it make sense, no. But, for all the laughs and education ive received from watching Ave's channel, i bought one immediately. Also, took me about 10 minutes to assemble. Make cool shit and put it on tinternet.
@NeeboopshАй бұрын
aVe is hilarious. he used a variant of "its like stealing from peter to pay paul" in one of his videos and i still laugh when it pops into my head it's like jerkin off the dog to feed the cat so nasty ;)
@aguyinbackАй бұрын
Graphic illustration of "the other part of the machine shop" that is rarely talked about-Deburring! It's often done by hand and is absolutely necessary to get the fit and finish that is expected of machine parts and assemblies.
@wotnoturboАй бұрын
AvE is overrated.
@jazzmusiccontinues1134Ай бұрын
Hey look a contrarian, how unusual in the youtube comments, surely that's their real opinion and they aren't just looking for attention or trying to make someone else as miserable as they are
@y0ur_name_here12 күн бұрын
Coming from a troll, that's so edgy and insightful.
@wotnoturbo12 күн бұрын
@@y0ur_name_here You don't like my opinion so clearly i am a troll..... let me guess - Democrat ?
@64Pete6 күн бұрын
@@wotnoturbo I''m a lefty, yet I agree with you 100% Who'd a thought it?
@wotnoturbo6 күн бұрын
@@64Pete 👍👍
@carlosdangerfield9477Ай бұрын
an arm and a duck!
@bobaverageАй бұрын
Something about this AvE blade holder ticks my boxes. Ill just stick with the broke arsed plastic one for the time being.
@mikehunt8968Ай бұрын
Hmmm, I have some tungsten disulphide in the workshop, even slipperyer than Molly...
@_TraMorАй бұрын
The one thing that I wasn't sure about on this is if it could be assembled ambidextrous or not, it seems like it could with the swapping of panels?
@fromthebackyard2415Ай бұрын
I think that would work
@colgesuksАй бұрын
I got mine is the mail the other day. I'm also going to post a video on my channel. It's not this account
Пікірлер
I use an olfa HD with the plastic stripped off. I put a piece of reflective tape on it, cos it's very slim and easy to lose. Only downside is that the blade can slide out the back if it's loosened because the stop was on the plastic.
If you use your olfas with the blades extended you should really check out the Knipex one. They have a spine that can be extended to support the blade which makes it way better to use with longer extensions. Nice video. I think I'll pick one up. But there's definitely a bunch of things I wish were done differently. Might try to develop my own 18mm version.
Just assembled mine today (in Australia). Well made, but needs owner to tidy up to their own specs. Good job AvE.
using it will make it worn in
bought and used everyday at work, it only gets better. mine is butter smooth i love it
Nice Clean up I think its a nice Knife
I placed my order in April and it still hasn't shipped. I've now lost 3 finger-like appendages because I'm using a chainsaw to open my packages. GET HERE YOU CANADIAN BASTARD! 🤣
Is there a 3d printable version?
This type with break off blades are garbage. Not one have I ever owned dies the blade break properly
Just a blonde-one o' play at the business end there...
Not opening package with chainsaw = major fail
I wonder when mine will come, its been a month since i ordered.
Mine took about a month maybe more
Mine just shipped and you got yours a month ago? What incestuous tricks did you have to play for such favor?
If you have an auto tumbler with appropriate media it will put a perfect finish on the material and save almost all that sanding. I say almost as it will still need fine tuning here & there. Fantastic tool.
Still Waiting for mine, in aus
I just got mine in the mail, I think of it more like merch but instead of a novelty t shirt its a tool I can use to cut boxes.
I bought the double bit pencil topper. Badass as all hell! I cant do much with it.. but thats besides the point.🫡
I flushed and polished my outer edges too, came out really nice. You can also easily flush the protruding screws too, that's what I did. Finally slightly rounded and polished the corner edges, feels great. Well done and regards.
You needed more heat. Thank you for sharing
You could probably overlay random audio from his channel it'd somehow make sense.
I know he said 4-6 weeks. But did anyone get a tracking number?
You have to get the “shop” app. It’ll notify you when it ships
@@fromthebackyard2415 I have it. No updates on this order.
Just got the email an hour ago to say my knife has shipped, WOOHOO! Thanks for the assembly tips....and only for a second.
Was “cooking” an SL175 (twin) cylinder @ 300f after applying Gun-Kote, and the liners *slid* out. Pushed them back in with gloved hands.
I've got a sneaking suspicion that you're going to get quite a few views on this; it popped up, and I'm not even looking for it.
I’m still waiting on mine to shore up
As a laser operator I see things about how this kit was cut that kinda grate against my standards. The cut lead-ins (little divots on the side of the parts) should have been on an inside facing edge or the end of the part and the bridges on the two spacers could have been much thinner for easier cleanup. Speaking of clean up, the operator could have gave the parts a gentle wipe when the slag was hot and it mostly would have brushed off, or refine the cut to reduce how much is produced in the first place. Whining aside, you've done a great job cleaning it up and I love the idea of the knife but these small changes wouldn't have cost any production time to result in a better finished product.
Mine came in bubble wrap, interestingly
Its like building a model as a kid. You more time that you spend prepping each part before assembly, the better the completed product is.
A thing of beauty is a joy to behold.
I prefer a carpet knife personally
Who else was shouting "FOCUS YOU F***!" 😀
I’m having a problem where I live I can’t find the blades
I’ve never seen them in stores around me. I order them online. 25mm or 1” snap-off blades
I just learned I had to confirm order number with phone number… I hope I end up with one… I ordered the instant they were available.
Thank you for not showing your vice.
I like that you gave it a fair shake... it's nice to see constutive criticism without totally bashing.. good video. And yes I like AVE.
Absolutely love ave. Could not be more happy seeing an honest tool review. That's the reason we watched ave 2 start with. Good job on your review.
I bought one too and agree with most of your observations I enjoyed the assembly and cleanup part
I'm still waiting on mine.
Great Video, thank you. Great description of how someone who uses these knives often evaluates them. I'm just using it to cut up boxes, and I realize I'm way overpaying, but I don't mind supporting a YT channel that I've enjoyed watching for a long time makes it worthwhile (I have no use for stickers, mugs, etc.)
Looks cool but too much play for me.
Utility….no.
Great clip. Thank you. Would the outside layered edges turn out better if the bulk of the edge sanding was done after assembly? I will try that.
Is it the best knife, no. Is it cool as hell, yes. does it make sense, no. But, for all the laughs and education ive received from watching Ave's channel, i bought one immediately. Also, took me about 10 minutes to assemble. Make cool shit and put it on tinternet.
aVe is hilarious. he used a variant of "its like stealing from peter to pay paul" in one of his videos and i still laugh when it pops into my head it's like jerkin off the dog to feed the cat so nasty ;)
Graphic illustration of "the other part of the machine shop" that is rarely talked about-Deburring! It's often done by hand and is absolutely necessary to get the fit and finish that is expected of machine parts and assemblies.
AvE is overrated.
Hey look a contrarian, how unusual in the youtube comments, surely that's their real opinion and they aren't just looking for attention or trying to make someone else as miserable as they are
Coming from a troll, that's so edgy and insightful.
@@y0ur_name_here You don't like my opinion so clearly i am a troll..... let me guess - Democrat ?
@@wotnoturbo I''m a lefty, yet I agree with you 100% Who'd a thought it?
@@64Pete 👍👍
an arm and a duck!
Something about this AvE blade holder ticks my boxes. Ill just stick with the broke arsed plastic one for the time being.
Hmmm, I have some tungsten disulphide in the workshop, even slipperyer than Molly...
The one thing that I wasn't sure about on this is if it could be assembled ambidextrous or not, it seems like it could with the swapping of panels?
I think that would work
I got mine is the mail the other day. I'm also going to post a video on my channel. It's not this account