My previous video on the bike: • 1993 Nighthawk 250 Har...
Жүктеу.....
Пікірлер: 22
@AussieRandomVideos2 ай бұрын
Its awesome. I want a small chopper like this for around my area
@evosportychop83323 жыл бұрын
Dig the bike, I want to build something like this, got to find a bike to chop up, and track down a welder.
@trdadam23253 жыл бұрын
Love the chopped exhaust sound not this and get rid of the cv carb buy the cm200 manifold and buy a pz26 carb cheap jet it done ad velocity stack too, custom exhaust no baffles the way to go done. Great looking bike!
@KAPANGAAAMASTER3 жыл бұрын
Nice chopper!
@JBidensucks2 жыл бұрын
I'm not far from Philly let's ride ! This video gave me an idea for a very shiny looking rebel 250 I got for practically free and couldn't figure out what I wanted to do with it since most my bikes are Harleys. Now I know, building a chop, cus selling it would be pointless
@ThaDirtyMick2 ай бұрын
Bro I’ve got a 97 that I’m making a bobber out of now , these are bad ass little bikes
@fromthebackyard2415
2 ай бұрын
The engines are bulletproof! It was my first bike over a decade ago and its give me the least problems…
@icandsc2 жыл бұрын
so I made a chopper out of my Rebel as well.....difference is mine is a rat bike (I like when the rattle can paint chips off). The bars are tall, but EXTREMELY narrow. anyway, I noticed one thing that must be common for Rebels if you have tall bars - the tendency to sway when you ride. Maybe its just because we arent likely to push on bars that are shoulder height or above 🤣🤣🤣
@pantsbeontheground1620 Жыл бұрын
Put 23 inch Xr500 ft wheel on my rebel,factory axle from the rebel fit!
@thyartisnick57432 жыл бұрын
It looks all hard until you hear it driving lol
@soulisiron26252 жыл бұрын
I have CM-200 and i made a long fork chopper
@kritromulus68512 жыл бұрын
#BikerForce..Love 21 ins. Wheel !?!
@pantsbeontheground1620 Жыл бұрын
Whats the front tire?
@danhoy8356 Жыл бұрын
I know the nighthawk and rebel share the same engine. Are the wheels and tires the same? I can get a hawk for cheap, wondering if the frame your running is for a rebel and it all swaps over? Thanks man
@fromthebackyard2415
Жыл бұрын
The Nighthawk rear wheel is an inch larger than the Rebel. Also the Nighthawk has a front drum brake and the Rebel has a front disk. So even if the rear wheel managed to fit the forks wouldn’t wouldn’t work with the drum brake. I made my frame from scratch. If you’re an average sized guy or bigger the rebel frame will feel very small.
@danhoy8356
Жыл бұрын
@@fromthebackyard2415 thanks for the info! I appreciate your time getting back to me. Rebel was my first bike and yes it’s small. I think you did it the right way by building your own frame. I’ll check your channel and see if you have a build on that.
@fromthebackyard2415
Жыл бұрын
@@danhoy8356 are you trying to customize/modify in a similar way? I did make another video about the build and how I did it but I didn’t have actual footage of the process
@danhoy8356
Жыл бұрын
@@fromthebackyard2415 yes sir. I was mostly wondering if one of the weld on back half kits for the rebel would work on the nighthawk frame. But after hearing you used a universal kit, I’m sure I can make it happen. Super cool looking bike you have
@icepick8592 жыл бұрын
How did you get the kickstand to work being lower?
@fromthebackyard2415
2 жыл бұрын
It’s been a long time since I attached it but I think I just mocked up how I wanted the bike to lean and then welded the kickstand bracket on accordingly
@fromthebackyard2415
2 жыл бұрын
It’s been a long time since I attached it but I think I just mocked up how I wanted the bike to lean and then welded the kickstand bracket on accordingly
@greysonjune55983 жыл бұрын
Hey I've been checking this out since the original video if you're serious about selling it I'd be Interested in buying it
Пікірлер: 22
Its awesome. I want a small chopper like this for around my area
Dig the bike, I want to build something like this, got to find a bike to chop up, and track down a welder.
Love the chopped exhaust sound not this and get rid of the cv carb buy the cm200 manifold and buy a pz26 carb cheap jet it done ad velocity stack too, custom exhaust no baffles the way to go done. Great looking bike!
Nice chopper!
I'm not far from Philly let's ride ! This video gave me an idea for a very shiny looking rebel 250 I got for practically free and couldn't figure out what I wanted to do with it since most my bikes are Harleys. Now I know, building a chop, cus selling it would be pointless
Bro I’ve got a 97 that I’m making a bobber out of now , these are bad ass little bikes
@fromthebackyard2415
2 ай бұрын
The engines are bulletproof! It was my first bike over a decade ago and its give me the least problems…
so I made a chopper out of my Rebel as well.....difference is mine is a rat bike (I like when the rattle can paint chips off). The bars are tall, but EXTREMELY narrow. anyway, I noticed one thing that must be common for Rebels if you have tall bars - the tendency to sway when you ride. Maybe its just because we arent likely to push on bars that are shoulder height or above 🤣🤣🤣
Put 23 inch Xr500 ft wheel on my rebel,factory axle from the rebel fit!
It looks all hard until you hear it driving lol
I have CM-200 and i made a long fork chopper
#BikerForce..Love 21 ins. Wheel !?!
Whats the front tire?
I know the nighthawk and rebel share the same engine. Are the wheels and tires the same? I can get a hawk for cheap, wondering if the frame your running is for a rebel and it all swaps over? Thanks man
@fromthebackyard2415
Жыл бұрын
The Nighthawk rear wheel is an inch larger than the Rebel. Also the Nighthawk has a front drum brake and the Rebel has a front disk. So even if the rear wheel managed to fit the forks wouldn’t wouldn’t work with the drum brake. I made my frame from scratch. If you’re an average sized guy or bigger the rebel frame will feel very small.
@danhoy8356
Жыл бұрын
@@fromthebackyard2415 thanks for the info! I appreciate your time getting back to me. Rebel was my first bike and yes it’s small. I think you did it the right way by building your own frame. I’ll check your channel and see if you have a build on that.
@fromthebackyard2415
Жыл бұрын
@@danhoy8356 are you trying to customize/modify in a similar way? I did make another video about the build and how I did it but I didn’t have actual footage of the process
@danhoy8356
Жыл бұрын
@@fromthebackyard2415 yes sir. I was mostly wondering if one of the weld on back half kits for the rebel would work on the nighthawk frame. But after hearing you used a universal kit, I’m sure I can make it happen. Super cool looking bike you have
How did you get the kickstand to work being lower?
@fromthebackyard2415
2 жыл бұрын
It’s been a long time since I attached it but I think I just mocked up how I wanted the bike to lean and then welded the kickstand bracket on accordingly
@fromthebackyard2415
2 жыл бұрын
It’s been a long time since I attached it but I think I just mocked up how I wanted the bike to lean and then welded the kickstand bracket on accordingly
Hey I've been checking this out since the original video if you're serious about selling it I'd be Interested in buying it