Beautiful truck Jesse i love it man. Ive got the exact same truck in metallic brown although i fitted the 1.9 inch wheels from the Landrover Defender. Do you know if the Traxxas titan 12 or maybe 14 turn brushed mitor will work to get a little bit extra speed? When Traxxas says the stock 21 turn titan is reversed rotation is that just reversed wiring? Like if i got a normal motor thats not reversed rotation and then reversed the polarity can it be made to work? I believe this is because the portal axkes reverse the direction of axle rotation so a reversed rotation motor was required to remedy this. Thats a really nice great looking truck Jesse 👍👌
@X1j516 күн бұрын
Best looking F150 I’ve seen yet
@peterdame20 күн бұрын
Thanks for the mod mate😊
@joedipietro2559Ай бұрын
This is beautiful 👌💪
@IonNightАй бұрын
The issue with negative camber at the bottom and the positive camber at the top is caused by the a-arms not being parallell.
@andrewnar54872 ай бұрын
The upper arm ball that connects to the spindle needs to be shaved a couple mil to get rid of a little positive camber. Overall it looks fine. If you crawl it shouldn’t mess with anything much. Shim that wheel hex with some thou shims.
@crocsonletsgo96652 ай бұрын
Just a heads up from a comp guy, a good plastic bumper is designed to hit the rock first to help bump you up the heavy obstacles.
@AFishBicycle3 ай бұрын
Nice 👌
@AFishBicycle3 ай бұрын
Awesome content and tremendous work! Hard to tell it’s your first try 😉
@yvesstocky99364 ай бұрын
Colt Seavers!
@JimbobJames-n2p4 күн бұрын
I used to watch Lee Majors in the Fall Guy. Great show and the blonde girl was beautiful too. Heather Graham was her name if I'm remembering correctly. Never saw her do any other TV shows or films again after that. Colts truck was a GMC though. Strange I remember that but here in Australia as a kid I had never heard of GMC. It was General Motors Chevrolet wasn't it? Yeas this build from Jesse Bussinger looks awesome 👌👍
@henryxdam5 ай бұрын
Thanks for this video! How has this been working out so far? Are the 4m spacers 3d printed and are they required? Part Number for the knuckles for those interested ASC42342
@eugeniolopez91895 ай бұрын
No step by step vido lol....
@DrBwacko6 ай бұрын
gotta like that Element EWWWWtron
@eileenhinsley74436 ай бұрын
Great Vid, Lots of useful info, will be giving them a try. Many Thanks
@jessebussinger50582 ай бұрын
No problem 👍
@supranomicon6 ай бұрын
Looks great, thanks for sharing!
@aftermathmotomxrc6 ай бұрын
Honorable mention is in Your Future🎉
@Bassaholik6 ай бұрын
My stock TRX4 will do that
@OGRadGrow6 ай бұрын
Nice 💯👍🏾
@johnsnowdenjr71696 ай бұрын
Nice looking ford truck
@jessebussinger50585 ай бұрын
Thanks 👍
@vansantsam7 ай бұрын
A cheap way to attain overdrive is with tire size.. put the taller ones on the front.. No rule that says your tread patterns need to match..
@EricsRC7 ай бұрын
Good stuff! Loked and subbed brother! I have the K10 but just ordered the brown f150 for my wife.
@moimeme88647 ай бұрын
windshield glasses and side windows have to be transparent !
@JimbobJames-n2p4 күн бұрын
Not really that hard to do though. If Traxxas used just normal Lexan paint it's only a matter of using some Tamiya polycarbonate Lexan cleaner to remove the pain carefully without scratching the Lexan. It might require a few tries but should work. Then simply remove the decals. But then you probably will have to make up a scale interior too. Otherwise your just going to be looking at the chassis and battery and electronics. I don't think the black windows look that bad though.
@jessjoshwyatt35717 ай бұрын
Another question, are the 2 speed and diff servos rated for 7.2 also or is that eventually gonna cause a problem having the esc turned up to 7.2?
@jessebussinger50585 ай бұрын
im not sure honestly but ive seen people run the big 2.6 monster truck tires on trx4s with no issues
@jessjoshwyatt35717 ай бұрын
Looks good. I don't think the cheyenne comes with a roll bar only the ford comes with it. The k10 has to be bought for the cheyenne.
@dustin68287 ай бұрын
The 1/10 K10 doesn’t but the 1/18 K10 does have the bar. I’m deleting it from my TRX4m
@makestuffbetter197 ай бұрын
Love the info on IFS! Thank you! You got anew sub from me!
@davekastner35907 ай бұрын
Very nice and you did an excellent job detailing what it took to move the servo to the axle.
@westernsharpie7 ай бұрын
Looks good! Yes brown for the win. I shoulda gone with that cream decal on mine too. I got a few cool upgrades done to mine as well you might like.
@Ray_Dizon7 ай бұрын
Thank you!!!!
@lesterduhon61247 ай бұрын
Great job. Gave me some good ideas.😊
@JiluMiah-ek2rd8 ай бұрын
Great video, bud! Arches look just right with the bumperless design
@Backyardcrawler8 ай бұрын
Looks good
@waynetate98958 ай бұрын
The build looks incredible.
@jessebussinger50588 ай бұрын
thanks! ill have a video soon showing the wheel/tire combo on it
@gypsydanger53458 ай бұрын
would that body work on trx 4 sport !?
@jessebussinger50588 ай бұрын
i think the wheelbase is longer than trx4, it could if you get the longer rear link kit
@Conservativeblackman8 ай бұрын
Very Nice, that's spectacular!
@jessebussinger50588 ай бұрын
thank you, got the new wheels and tires on so ill post a short soon to show what it looks like now
@jeffdedrick23128 ай бұрын
Great job, where did you get the spacers?
@jessebussinger50588 ай бұрын
@jeffdedrick2312 i got them from a hobby store in next town over but you can find factory spacers on any axial rc extra parts trees and you can very easily find a assorted pack of aluminum spacers like the ones i used on Amazon/Ebay
@40thNestang9 ай бұрын
Nice job! Showroom Hobbies is the name for the decals btw.
@jessebussinger50589 ай бұрын
really?! ill have to check that out, thanks
@jessebussinger50589 ай бұрын
stay tuned, there will be a part 2 on this truck comming soon
@charlesreeves14749 ай бұрын
You getting into rc cars now!
@apophisjones436110 ай бұрын
Cool. Maybe a test drive follow up ?
@jessebussinger50589 ай бұрын
Yes, soon
@landonmarlow754610 ай бұрын
This is totally random but I bought your 224cc go cart almost a year ago. We put a tachometer on it and it hit somewhere between 95** and 10k
@MrRui33333 Жыл бұрын
good mods !
@theowilkins3641 Жыл бұрын
great video bro really helped, hoping to get a trx 4 soon!
@Chet7474 Жыл бұрын
What Shock towers are you using? I want to remove my inner fender wells.
@jessebussinger50589 ай бұрын
they are cheapo ebay specials unbranded chinese, i dont believe in the name brand stuff for everything
@armandofigueroa9966 Жыл бұрын
What tires do you have on sir ?
@jessebussinger5058 Жыл бұрын
those are modded factory canyon trail tires
@jacobmessmer Жыл бұрын
getting underdrive first is easier on you and the drivetrain
@greenie43 Жыл бұрын
I'm using the rubber bands on my scx24. 😎👍
@RCDisiac Жыл бұрын
That battery tray seems like it sits higher than the stock tray?
@autoglossncmobiledetailing8812 Жыл бұрын
Definitely sits lower
@LunchBox504 Жыл бұрын
What shock towers are these?
@jessebussinger5058 Жыл бұрын
ebay specials lol no brand name and they were like $20
@Charlieoil Жыл бұрын
What is the advantage of the full droop???
@jessebussinger5058 Жыл бұрын
waaayyyyyy lower c.g.
@paulmastone6886 Жыл бұрын
So how did you address the poor steering radius. Yep, definitely would take scx10 2 over sport.
@jessebussinger5058 Жыл бұрын
it turns up to 50° each way after some adjustments
@flippers160 Жыл бұрын
did you know about the crawl mode, hold down the on button until it blinks 5 times and it now has drag brake
Пікірлер
Beautiful truck Jesse i love it man. Ive got the exact same truck in metallic brown although i fitted the 1.9 inch wheels from the Landrover Defender. Do you know if the Traxxas titan 12 or maybe 14 turn brushed mitor will work to get a little bit extra speed? When Traxxas says the stock 21 turn titan is reversed rotation is that just reversed wiring? Like if i got a normal motor thats not reversed rotation and then reversed the polarity can it be made to work? I believe this is because the portal axkes reverse the direction of axle rotation so a reversed rotation motor was required to remedy this. Thats a really nice great looking truck Jesse 👍👌
Best looking F150 I’ve seen yet
Thanks for the mod mate😊
This is beautiful 👌💪
The issue with negative camber at the bottom and the positive camber at the top is caused by the a-arms not being parallell.
The upper arm ball that connects to the spindle needs to be shaved a couple mil to get rid of a little positive camber. Overall it looks fine. If you crawl it shouldn’t mess with anything much. Shim that wheel hex with some thou shims.
Just a heads up from a comp guy, a good plastic bumper is designed to hit the rock first to help bump you up the heavy obstacles.
Nice 👌
Awesome content and tremendous work! Hard to tell it’s your first try 😉
Colt Seavers!
I used to watch Lee Majors in the Fall Guy. Great show and the blonde girl was beautiful too. Heather Graham was her name if I'm remembering correctly. Never saw her do any other TV shows or films again after that. Colts truck was a GMC though. Strange I remember that but here in Australia as a kid I had never heard of GMC. It was General Motors Chevrolet wasn't it? Yeas this build from Jesse Bussinger looks awesome 👌👍
Thanks for this video! How has this been working out so far? Are the 4m spacers 3d printed and are they required? Part Number for the knuckles for those interested ASC42342
No step by step vido lol....
gotta like that Element EWWWWtron
Great Vid, Lots of useful info, will be giving them a try. Many Thanks
No problem 👍
Looks great, thanks for sharing!
Honorable mention is in Your Future🎉
My stock TRX4 will do that
Nice 💯👍🏾
Nice looking ford truck
Thanks 👍
A cheap way to attain overdrive is with tire size.. put the taller ones on the front.. No rule that says your tread patterns need to match..
Good stuff! Loked and subbed brother! I have the K10 but just ordered the brown f150 for my wife.
windshield glasses and side windows have to be transparent !
Not really that hard to do though. If Traxxas used just normal Lexan paint it's only a matter of using some Tamiya polycarbonate Lexan cleaner to remove the pain carefully without scratching the Lexan. It might require a few tries but should work. Then simply remove the decals. But then you probably will have to make up a scale interior too. Otherwise your just going to be looking at the chassis and battery and electronics. I don't think the black windows look that bad though.
Another question, are the 2 speed and diff servos rated for 7.2 also or is that eventually gonna cause a problem having the esc turned up to 7.2?
im not sure honestly but ive seen people run the big 2.6 monster truck tires on trx4s with no issues
Looks good. I don't think the cheyenne comes with a roll bar only the ford comes with it. The k10 has to be bought for the cheyenne.
The 1/10 K10 doesn’t but the 1/18 K10 does have the bar. I’m deleting it from my TRX4m
Love the info on IFS! Thank you! You got anew sub from me!
Very nice and you did an excellent job detailing what it took to move the servo to the axle.
Looks good! Yes brown for the win. I shoulda gone with that cream decal on mine too. I got a few cool upgrades done to mine as well you might like.
Thank you!!!!
Great job. Gave me some good ideas.😊
Great video, bud! Arches look just right with the bumperless design
Looks good
The build looks incredible.
thanks! ill have a video soon showing the wheel/tire combo on it
would that body work on trx 4 sport !?
i think the wheelbase is longer than trx4, it could if you get the longer rear link kit
Very Nice, that's spectacular!
thank you, got the new wheels and tires on so ill post a short soon to show what it looks like now
Great job, where did you get the spacers?
@jeffdedrick2312 i got them from a hobby store in next town over but you can find factory spacers on any axial rc extra parts trees and you can very easily find a assorted pack of aluminum spacers like the ones i used on Amazon/Ebay
Nice job! Showroom Hobbies is the name for the decals btw.
really?! ill have to check that out, thanks
stay tuned, there will be a part 2 on this truck comming soon
You getting into rc cars now!
Cool. Maybe a test drive follow up ?
Yes, soon
This is totally random but I bought your 224cc go cart almost a year ago. We put a tachometer on it and it hit somewhere between 95** and 10k
good mods !
great video bro really helped, hoping to get a trx 4 soon!
What Shock towers are you using? I want to remove my inner fender wells.
they are cheapo ebay specials unbranded chinese, i dont believe in the name brand stuff for everything
What tires do you have on sir ?
those are modded factory canyon trail tires
getting underdrive first is easier on you and the drivetrain
I'm using the rubber bands on my scx24. 😎👍
That battery tray seems like it sits higher than the stock tray?
Definitely sits lower
What shock towers are these?
ebay specials lol no brand name and they were like $20
What is the advantage of the full droop???
waaayyyyyy lower c.g.
So how did you address the poor steering radius. Yep, definitely would take scx10 2 over sport.
it turns up to 50° each way after some adjustments
did you know about the crawl mode, hold down the on button until it blinks 5 times and it now has drag brake
i have hobby wing 1080 esc