Hi Edward, when I go into Calibration my left joy stick is registering Left and Right 100% but it does not register anything when pressing the joy stick Up and Down. I have not had any issues with my controller--no dropping it on the ground, no damage. Any idea what the problem is?
@edwardfigura22 күн бұрын
Are your controller sticks screwed in properly? Do you screw and unscrew them often? It’s tough to say, but you could try asking chatGPT what it thinks. I’ve never encountered that issue.
@cristo341Ай бұрын
nice one
@edwardfigura22 күн бұрын
Thank you!
@billdombАй бұрын
NOT completely applicable to Mavic Pro
@edwardfigura6 күн бұрын
The first Mavic Pro? 😂 definitely not!
@reggiestrachan33782 ай бұрын
Bullshitter long video brain surgery is what he said so simple These guys are ridiculous
@dronetv22663 ай бұрын
To much blah blah blah show it
@edwardfigura6 күн бұрын
You can use the skip buttons 😂 I like to inform people of why they’re doing what they’re doing before they’re doing it. That’s how I personally learn the best.
@timmarshall63666 ай бұрын
Can NOT download app on my Mac OS of 11.7.1. Any way to do this?
@edwardfigura6 күн бұрын
Did you end up figuring this out?
@paintball69106 күн бұрын
Nope
@edwardfigura6 күн бұрын
@@paintball6910 make sure you download the correct software. The correct software works on all latest versions of OS.
@riverbankfisher7 ай бұрын
Due to sheer laziness on my part, I neglected anti-collision sensor calibration on all my Mavics, thinking that because I fly all my drones with the obstacle avoidance sensors deactivated, I shouldn't have to bother calibrating them. That logical presumption of mine turned out to be dead wrong because even with all the sensors always turned off my Mavic 1 Pro confounded me for months by stopping randomly during waypoint missions, often with the result that the battery came perilously close to draining low enough for the drone to force-land far from home due to battery charge levels dropping below that critical 10% level. By finally biting the bullet and laboriously calibrating the anti-collision sensors on my DJI drones, the stuttering stop-and-go flight behavior of my Mavic 1 Pro ceased immediately and the drone has flown smooth as silk ever since, while also filming sharply focused footage that was inconsistent at best before the obstacle sensor calibration I belatedly carried out. I simply had no idea that failure to calibrate obstacle avoidance sensors is ESSENTIAL regardless of whether those sensors are toggled on or off during flight. In trying to calibrate the sensors on my Mavic 2 Pro for the first time, the main problem I have encountered is that after completing the calibration of all sensors front, back, and sides, the calculation phase of the process remains stuck at the 0% stage, and does not budge thereafter. I'll give it another shot but now that I know how absolutely VITAL the calibration of obstacle avoidance sensors is to preventing the loss of the drone, I won't dare fly my Mavic 2 Pro until I succeed in this calibration process and see that calculation indicator scrolls up to the full 100% completion status before I power off the drone and disconnect it.
@edwardfigura6 күн бұрын
Thank you for the very insightful comment. I’ve had similar situations happen to me caused by division sensors needing calibration, which is why I made this video! We were able to calibrate your Mavic 2 Pro?
@riverbankfisher6 күн бұрын
@@edwardfigura Yes I finally did calibrate my Mavic 2 Pro. Turns out that I was using the wrong version of DJI Assistant 2. The version of DJI Assistant 2 that works with the Mavic 1 Pro will NOT work in calibrating the Mavic 2 Pro because the Mavic 2 Pro MUST be calibrated with the DJI Assistant 2 FOR MAVICS, which is different from the "regular" DJI Assistant 2 that ironically works for the Mavic 1 Prro but NOT the Mavic 2 Pro. This peculiarity is not specifically mentioned in any of DJI's user notes on the DJI Assistant 2, and I stumbled on it after a long and baffling trial-and-error episode a while back.
@edwardfigura6 күн бұрын
@riverbankfisher awesome I’m glad that you ended up figuring it out. I know there’s a lot of trial and error with the Mavic 2 Pro. I was forced to figure everything out out of my own due to the nature of my job. Which is what drove me to creating these videos. I wanted to help people with my own findings and also have videos that I could personally refer back to!
@dhansel48359 ай бұрын
You need to rotate the wheels one at a time otherwise you may not have your control sticks calibrated. Be sure you have the drown powered off.
@edwardfigura6 күн бұрын
What do you mean?
@user-vy5mu3dk4w10 ай бұрын
Hi I need help on my mavic 2 pro I have left vision sensor error but both show disabled in app and also my front ones show no errors but do not work even tho app shows front and back should work I tried calibration in asistant 2 app on pc and it couldn't pick the green box up please help its on latest software version
@edwardfigura6 күн бұрын
Did you end up figuring this out?
@Takie_Tam_Filmiki10 ай бұрын
One problem i have: mavic 2 pro hyperlaps has only 4:3 ratio which isn't accepted on stock webs. No 16:9 available for hyperlaps.
@edwardfigura10 ай бұрын
You have to create the hyperlapse yourself with the raw photos. Or simply import the automatic hyperlapse into a 16x9 timeline and export it.
@Takie_Tam_Filmiki10 ай бұрын
Edward, thanks for answer quickly. Always i do from raw in post production in adobe pro. Some reason final rendered material is letter box resolution.
@edwardfigura10 ай бұрын
You need to change that from your editing software.
@Takie_Tam_Filmiki10 ай бұрын
Yes it works ! During export from Lr need resize manualy to 3297x2160. Thanks Edi !
@CaptPaulH11 ай бұрын
Hi Edward, quick question, Mavic 2 asking for compass calibration more often, when clicking Start Calibration sometime times nothing happens?!! Quit in flight one day, spooky!!
@edwardfigura11 ай бұрын
Mavic 2 Pro will often ask for recalibration, especially if you’re in an area with a lot of magnetic interference. Make sure you are away from metal, including a parking lot full of cars. Also make sure you are not in the middle of a city with sky scrapers surrounding you. All these things will make it very difficult for Mavic 2 to calibrate. Not sure what you mean by it quit in flight, can you elaborate?
@vincentcotnoir1356 Жыл бұрын
Hello ! Would you please tell me why my drone won't finish the calibration ... I do all the step, but went it come to the final ( Calibration information colleted, Calibrating ... ) Calculating ... window always stay at Zéro ( 0 ), even if it said that it could take 1 minute ... still the same after 10 minutes, and never I can get it full. Thank
@vincentcotnoir1356 Жыл бұрын
Ok, just found out I had a old DJI assistant program version .... now it work ;)
@SyedMohammedHadi Жыл бұрын
Really helpful 🙌🏻
@mitorajAstar Жыл бұрын
Hi 🙂 Thank you for your help👍👌✌
@UiBhrianEnterprises Жыл бұрын
Peace it is !
@qwoods12345 Жыл бұрын
Hi Edward. Where can I find your intro music?
@edwardfigura6 күн бұрын
Artlist!
@UiBhrianEnterprises Жыл бұрын
Very helpful thank you !
@edwardfigura6 күн бұрын
You’re very welcome!!
@qwoods12345 Жыл бұрын
Hi Edward what is the name of the intro song here?
@edwardfigura6 күн бұрын
I don’t remember the exact name. I got it from Artlist
@qwoods12345 Жыл бұрын
What is name of your intro song? where can I find it?
@edwardfigura6 күн бұрын
I don’t remember the exact name. I got it from Artlist.
@thevascularguy Жыл бұрын
Mine keeps getting stuck at 0% when calculating. what am i doing wrong?
@nellus22728 ай бұрын
Hi, same to me, did you resolve?
@edwardfigura6 күн бұрын
Did you end up figuring this out?
@thevascularguy5 күн бұрын
@@edwardfigura unfortunately no I just flew it without calibrating
@ffoulem Жыл бұрын
Hey Edward, I like your drone presentations. Is there a way to customize the Helix quick shot so that the drone will do multiple outward spirals, instead of just 1?
@edwardfigura Жыл бұрын
Thank you François! I do not believe you can do that, but I could be wrong!! Try it out on the app next time you are flying, and let us all know if it worked or not!
@gennarobastard9995 Жыл бұрын
HELP ME PLEASE Congratulations for your video more than exhaustive I did my procedure for my mavic pro 2 just following your instructions I must say that first of all I don't find a double window like you in dji assistance 2 for mavic then once I finish the calibration procedure of all the sensors at the end of the construction of the log file the procedure rikane stops at 0% and is unable to close the procedure I was wondering if you could help me understand why this ever happens and possibly how I can solve it I state that like you I have both an imac and a notebook with windows 11 and on my imac I also installed windows 10 but with both the problem remains thanks for everything and I look forward to your info
@edwardfigura6 күн бұрын
Did you end up figuring this out?
@vagueforeverentertainment7401 Жыл бұрын
I am following the same process and my battery is also 100% charged. But still it is not connecting. Please help me through this, it will be a great help sir...
@edwardfigura6 күн бұрын
Did you end up figuring this out?
@luisnova60 Жыл бұрын
Txs man 🎉
@thomasdowen9959 Жыл бұрын
How do you get all the information in yellow next to the DJI app on your top information bar ? Any help would be greatly appreciated, Thomas
@edwardfigura6 күн бұрын
What information are you referring to? Please be more specific
@chrissgm1047 Жыл бұрын
Fuck off the camera is fine
@justiniho1 Жыл бұрын
Very interesting and informative. Thank you
@nmiller1967 Жыл бұрын
I guess no one has figured out a solution to this happening frequently to this point have they? Pretty much every time I start a new day of flying I have to do this.
@edwardfigura6 күн бұрын
Yeah, same here until I bought a new drone. It’s just one of those things that are unique to specific models. For example, the magic three does not have this issue at all.
@SmartPerspective Жыл бұрын
I was about to ask why didn’t you take off the gimbal cover - does leaving it on destroy the gimbal when it turns on?
@edwardfigura Жыл бұрын
It doesn’t destroy it, but it won’t do it any good 😊
@alitatunertc1775 Жыл бұрын
Great video!! Lots of useful information!!
@northeastdroneproductions Жыл бұрын
Hey there mate. Hope you see this as it's an old video but, one problem I am having is that on the SD card after doing a hyperlapse, I have DCIM, then when I open that the only folders I have to choose from is 100MEDIA and Panorama. !00Media contains the rendered file of the Hyperlapse, the 1080p version, so no problem there and Panorama contains a few pano shots I did but I have no Hyperlapse folder. Any ideas? Cheers mate
@edwardfigura Жыл бұрын
What drone are you using? What’s the SD card?
@northeastdroneproductions Жыл бұрын
@@edwardfigura thanks for getting back to me. mavic 2 pro and a SanDisk extreme pro
@edwardfigura Жыл бұрын
Are you in photo settings? Did you select DNG format (raw) for the photos?
@northeastdroneproductions Жыл бұрын
@@edwardfigura I have got jpg + raw selected so when ever I take an image, I get both files
@edwardfigura Жыл бұрын
Try only raw and see if that makes HYPERLAPSE folder appear. Also, what is the max storage in your SD card? And what kind of specs does it have?
@finecutpost Жыл бұрын
Won't work on Mavic Pro
@Futbalunlimited Жыл бұрын
Da Vinci can color grade DNG/RAW format.
@pritamaries Жыл бұрын
Very nicely explained
@youmasontube Жыл бұрын
Feel like I got told off at the end. I’m going outside
@edwardfigura6 күн бұрын
That’s the spirit!!
@Full-Spectrum-Testing Жыл бұрын
great video, i was confused by the process but you got me through it !
@sergiomoyaselva Жыл бұрын
Me salvaste la vida!!
@anlaosichuan1 Жыл бұрын
Love your video ! you have not created new ones for one year !!! DJI mini 3 Pro and DJI Mavic 3 Classic please.
@awdgizmo84 Жыл бұрын
Does anyone know what you are suppose to do when your OS is after 11 and the app wont launch?? i have been trying to find work arounds but no clue what to do.
@JohnleightondeanАй бұрын
yep, unless you have a really old Mac, I don't know the solution. I am stuck. does current Windows work, or do you need a really old windows computer as well ?
@edwardfigura6 күн бұрын
You have the wrong version. Make sure you find the correct software.
@YTFPV Жыл бұрын
Good info
@edwardfigura Жыл бұрын
Thank you! :)
@YTFPV Жыл бұрын
@@edwardfigura No worry keep up the good work!
@WHSBarronPride Жыл бұрын
I can't install the software - I can't get past the entering the password part. Help!
@edwardfigura Жыл бұрын
What’s asking you for a password?
@WHSBarronPride Жыл бұрын
@@edwardfigura Terminal - I was able to figure it out. You have to type the password by adding a command.
@northaustraliamedia Жыл бұрын
Curious. Why did you block out your battery time remaining?
@edwardfigura Жыл бұрын
As good as the Mavic 2 Pro is, it still has hardware issues, especially the batteries. Mavic 2 batteries tend to easily over heat if you plug them in to charge right after a flight. In this instance, this battery has been used so many times that it has lost the ability to calculate the estimated energy remaining, so it stopped displaying the time! I didn’t block it myself in post if that’s what you were wondering :) The Mavic 3 doesn’t have this issue because the batteries are much more durable and reliable.
@northaustraliamedia Жыл бұрын
@@edwardfigura Ah, no problem. Thanks!
@makhassanieh8429 Жыл бұрын
I couldn't calibrate the side sensor because of the usb cable. The assistant can't detect the calibration image. The usb place is totly wrong. What can I do. There is no way to properly fold the arm
@thumper8128 Жыл бұрын
it calibrates just fine with the cable plug in placement. The only issue should be if you dont fold the arms in as the arms, or the props if not removed, may get in the line of sight of the sensor, as long as they are folded in, just up to the cable, it works perfectly fine. Now once you are done with the complete screen follow through, if like me, you get lucky and get a sensor calibration issue, even though every screen was done corrrectly
@edwardfigura6 күн бұрын
I know it’s extremely inconvenient the way that they designed the drone. as you can see in my video I fold the arm in a very specific way. I recommend you try the same.
@alexcornofficial Жыл бұрын
We miss your videos! Come back
@edwardfigura Жыл бұрын
Thanks for the kind words! I am currently going through some stuff but I definitely want to come back eventually. Thanks for the support!!
@ryarbrough1000 Жыл бұрын
But the dji fpv is so much fun to fly compared to the mavic 2 pro!!
@edwardfigura6 күн бұрын
I 100% agree. However, as a professional Drone Pilot and cinematographer, I prefer flying drones with superior camera quality.
@DroneShots81 Жыл бұрын
Great video ☺️ the only thing I would like to understand is how to choose the correct white balance for the shot.
@edwardfigura6 күн бұрын
To be safe, always choose 5600 white balance. That is the standard daylight balance, which works in pretty much all outdoor settings. For indoor shooting, 5600 is also recommended but at that point you need to make sure that your image is not too cold or too warm. That is when I would start tweaking the white balance manually.
@rec_insano Жыл бұрын
🔥🔥🔥
@Takie_Tam_Filmiki Жыл бұрын
All good Edi, but how to explain why can not play exported file ? Comp up to date, super graphic card, ram 16 etc...still error code 3001033 or comething like that.
@edwardfigura Жыл бұрын
Hey, how are you exporting the video? Give me the settings and file format and I’ll see if I can help!
@Takie_Tam_Filmiki Жыл бұрын
I think there is some codec missing ? Actualy file is rendered properly, as i was manage upload to youtube and there is working fine. Just i can not play on my device. Playback in troubleshoot does not show any issues, windows up to date, can play 4k file etc. My preset in premiere is gopro, quicktime, max render quality
@edwardfigura Жыл бұрын
You use QuickTime for your PC? I thought Windows users used something else to play-back videos on their computers. I’m not sure what the native software it’s called. Try opening the videos with a different software, does that play the video?
@Takie_Tam_Filmiki Жыл бұрын
I have installed quicktime, vlc media player, media classic player, windows media player. No idea what else i could
@pedrobravo978 Жыл бұрын
Very cool
@PaulSmith-mh2yq Жыл бұрын
Really helpful, thanks - but incredibly frustrating !!
Пікірлер
Hi Edward, when I go into Calibration my left joy stick is registering Left and Right 100% but it does not register anything when pressing the joy stick Up and Down. I have not had any issues with my controller--no dropping it on the ground, no damage. Any idea what the problem is?
Are your controller sticks screwed in properly? Do you screw and unscrew them often? It’s tough to say, but you could try asking chatGPT what it thinks. I’ve never encountered that issue.
nice one
Thank you!
NOT completely applicable to Mavic Pro
The first Mavic Pro? 😂 definitely not!
Bullshitter long video brain surgery is what he said so simple These guys are ridiculous
To much blah blah blah show it
You can use the skip buttons 😂 I like to inform people of why they’re doing what they’re doing before they’re doing it. That’s how I personally learn the best.
Can NOT download app on my Mac OS of 11.7.1. Any way to do this?
Did you end up figuring this out?
Nope
@@paintball6910 make sure you download the correct software. The correct software works on all latest versions of OS.
Due to sheer laziness on my part, I neglected anti-collision sensor calibration on all my Mavics, thinking that because I fly all my drones with the obstacle avoidance sensors deactivated, I shouldn't have to bother calibrating them. That logical presumption of mine turned out to be dead wrong because even with all the sensors always turned off my Mavic 1 Pro confounded me for months by stopping randomly during waypoint missions, often with the result that the battery came perilously close to draining low enough for the drone to force-land far from home due to battery charge levels dropping below that critical 10% level. By finally biting the bullet and laboriously calibrating the anti-collision sensors on my DJI drones, the stuttering stop-and-go flight behavior of my Mavic 1 Pro ceased immediately and the drone has flown smooth as silk ever since, while also filming sharply focused footage that was inconsistent at best before the obstacle sensor calibration I belatedly carried out. I simply had no idea that failure to calibrate obstacle avoidance sensors is ESSENTIAL regardless of whether those sensors are toggled on or off during flight. In trying to calibrate the sensors on my Mavic 2 Pro for the first time, the main problem I have encountered is that after completing the calibration of all sensors front, back, and sides, the calculation phase of the process remains stuck at the 0% stage, and does not budge thereafter. I'll give it another shot but now that I know how absolutely VITAL the calibration of obstacle avoidance sensors is to preventing the loss of the drone, I won't dare fly my Mavic 2 Pro until I succeed in this calibration process and see that calculation indicator scrolls up to the full 100% completion status before I power off the drone and disconnect it.
Thank you for the very insightful comment. I’ve had similar situations happen to me caused by division sensors needing calibration, which is why I made this video! We were able to calibrate your Mavic 2 Pro?
@@edwardfigura Yes I finally did calibrate my Mavic 2 Pro. Turns out that I was using the wrong version of DJI Assistant 2. The version of DJI Assistant 2 that works with the Mavic 1 Pro will NOT work in calibrating the Mavic 2 Pro because the Mavic 2 Pro MUST be calibrated with the DJI Assistant 2 FOR MAVICS, which is different from the "regular" DJI Assistant 2 that ironically works for the Mavic 1 Prro but NOT the Mavic 2 Pro. This peculiarity is not specifically mentioned in any of DJI's user notes on the DJI Assistant 2, and I stumbled on it after a long and baffling trial-and-error episode a while back.
@riverbankfisher awesome I’m glad that you ended up figuring it out. I know there’s a lot of trial and error with the Mavic 2 Pro. I was forced to figure everything out out of my own due to the nature of my job. Which is what drove me to creating these videos. I wanted to help people with my own findings and also have videos that I could personally refer back to!
You need to rotate the wheels one at a time otherwise you may not have your control sticks calibrated. Be sure you have the drown powered off.
What do you mean?
Hi I need help on my mavic 2 pro I have left vision sensor error but both show disabled in app and also my front ones show no errors but do not work even tho app shows front and back should work I tried calibration in asistant 2 app on pc and it couldn't pick the green box up please help its on latest software version
Did you end up figuring this out?
One problem i have: mavic 2 pro hyperlaps has only 4:3 ratio which isn't accepted on stock webs. No 16:9 available for hyperlaps.
You have to create the hyperlapse yourself with the raw photos. Or simply import the automatic hyperlapse into a 16x9 timeline and export it.
Edward, thanks for answer quickly. Always i do from raw in post production in adobe pro. Some reason final rendered material is letter box resolution.
You need to change that from your editing software.
Yes it works ! During export from Lr need resize manualy to 3297x2160. Thanks Edi !
Hi Edward, quick question, Mavic 2 asking for compass calibration more often, when clicking Start Calibration sometime times nothing happens?!! Quit in flight one day, spooky!!
Mavic 2 Pro will often ask for recalibration, especially if you’re in an area with a lot of magnetic interference. Make sure you are away from metal, including a parking lot full of cars. Also make sure you are not in the middle of a city with sky scrapers surrounding you. All these things will make it very difficult for Mavic 2 to calibrate. Not sure what you mean by it quit in flight, can you elaborate?
Hello ! Would you please tell me why my drone won't finish the calibration ... I do all the step, but went it come to the final ( Calibration information colleted, Calibrating ... ) Calculating ... window always stay at Zéro ( 0 ), even if it said that it could take 1 minute ... still the same after 10 minutes, and never I can get it full. Thank
Ok, just found out I had a old DJI assistant program version .... now it work ;)
Really helpful 🙌🏻
Hi 🙂 Thank you for your help👍👌✌
Peace it is !
Hi Edward. Where can I find your intro music?
Artlist!
Very helpful thank you !
You’re very welcome!!
Hi Edward what is the name of the intro song here?
I don’t remember the exact name. I got it from Artlist
What is name of your intro song? where can I find it?
I don’t remember the exact name. I got it from Artlist.
Mine keeps getting stuck at 0% when calculating. what am i doing wrong?
Hi, same to me, did you resolve?
Did you end up figuring this out?
@@edwardfigura unfortunately no I just flew it without calibrating
Hey Edward, I like your drone presentations. Is there a way to customize the Helix quick shot so that the drone will do multiple outward spirals, instead of just 1?
Thank you François! I do not believe you can do that, but I could be wrong!! Try it out on the app next time you are flying, and let us all know if it worked or not!
HELP ME PLEASE Congratulations for your video more than exhaustive I did my procedure for my mavic pro 2 just following your instructions I must say that first of all I don't find a double window like you in dji assistance 2 for mavic then once I finish the calibration procedure of all the sensors at the end of the construction of the log file the procedure rikane stops at 0% and is unable to close the procedure I was wondering if you could help me understand why this ever happens and possibly how I can solve it I state that like you I have both an imac and a notebook with windows 11 and on my imac I also installed windows 10 but with both the problem remains thanks for everything and I look forward to your info
Did you end up figuring this out?
I am following the same process and my battery is also 100% charged. But still it is not connecting. Please help me through this, it will be a great help sir...
Did you end up figuring this out?
Txs man 🎉
How do you get all the information in yellow next to the DJI app on your top information bar ? Any help would be greatly appreciated, Thomas
What information are you referring to? Please be more specific
Fuck off the camera is fine
Very interesting and informative. Thank you
I guess no one has figured out a solution to this happening frequently to this point have they? Pretty much every time I start a new day of flying I have to do this.
Yeah, same here until I bought a new drone. It’s just one of those things that are unique to specific models. For example, the magic three does not have this issue at all.
I was about to ask why didn’t you take off the gimbal cover - does leaving it on destroy the gimbal when it turns on?
It doesn’t destroy it, but it won’t do it any good 😊
Great video!! Lots of useful information!!
Hey there mate. Hope you see this as it's an old video but, one problem I am having is that on the SD card after doing a hyperlapse, I have DCIM, then when I open that the only folders I have to choose from is 100MEDIA and Panorama. !00Media contains the rendered file of the Hyperlapse, the 1080p version, so no problem there and Panorama contains a few pano shots I did but I have no Hyperlapse folder. Any ideas? Cheers mate
What drone are you using? What’s the SD card?
@@edwardfigura thanks for getting back to me. mavic 2 pro and a SanDisk extreme pro
Are you in photo settings? Did you select DNG format (raw) for the photos?
@@edwardfigura I have got jpg + raw selected so when ever I take an image, I get both files
Try only raw and see if that makes HYPERLAPSE folder appear. Also, what is the max storage in your SD card? And what kind of specs does it have?
Won't work on Mavic Pro
Da Vinci can color grade DNG/RAW format.
Very nicely explained
Feel like I got told off at the end. I’m going outside
That’s the spirit!!
great video, i was confused by the process but you got me through it !
Me salvaste la vida!!
Love your video ! you have not created new ones for one year !!! DJI mini 3 Pro and DJI Mavic 3 Classic please.
Does anyone know what you are suppose to do when your OS is after 11 and the app wont launch?? i have been trying to find work arounds but no clue what to do.
yep, unless you have a really old Mac, I don't know the solution. I am stuck. does current Windows work, or do you need a really old windows computer as well ?
You have the wrong version. Make sure you find the correct software.
Good info
Thank you! :)
@@edwardfigura No worry keep up the good work!
I can't install the software - I can't get past the entering the password part. Help!
What’s asking you for a password?
@@edwardfigura Terminal - I was able to figure it out. You have to type the password by adding a command.
Curious. Why did you block out your battery time remaining?
As good as the Mavic 2 Pro is, it still has hardware issues, especially the batteries. Mavic 2 batteries tend to easily over heat if you plug them in to charge right after a flight. In this instance, this battery has been used so many times that it has lost the ability to calculate the estimated energy remaining, so it stopped displaying the time! I didn’t block it myself in post if that’s what you were wondering :) The Mavic 3 doesn’t have this issue because the batteries are much more durable and reliable.
@@edwardfigura Ah, no problem. Thanks!
I couldn't calibrate the side sensor because of the usb cable. The assistant can't detect the calibration image. The usb place is totly wrong. What can I do. There is no way to properly fold the arm
it calibrates just fine with the cable plug in placement. The only issue should be if you dont fold the arms in as the arms, or the props if not removed, may get in the line of sight of the sensor, as long as they are folded in, just up to the cable, it works perfectly fine. Now once you are done with the complete screen follow through, if like me, you get lucky and get a sensor calibration issue, even though every screen was done corrrectly
I know it’s extremely inconvenient the way that they designed the drone. as you can see in my video I fold the arm in a very specific way. I recommend you try the same.
We miss your videos! Come back
Thanks for the kind words! I am currently going through some stuff but I definitely want to come back eventually. Thanks for the support!!
But the dji fpv is so much fun to fly compared to the mavic 2 pro!!
I 100% agree. However, as a professional Drone Pilot and cinematographer, I prefer flying drones with superior camera quality.
Great video ☺️ the only thing I would like to understand is how to choose the correct white balance for the shot.
To be safe, always choose 5600 white balance. That is the standard daylight balance, which works in pretty much all outdoor settings. For indoor shooting, 5600 is also recommended but at that point you need to make sure that your image is not too cold or too warm. That is when I would start tweaking the white balance manually.
🔥🔥🔥
All good Edi, but how to explain why can not play exported file ? Comp up to date, super graphic card, ram 16 etc...still error code 3001033 or comething like that.
Hey, how are you exporting the video? Give me the settings and file format and I’ll see if I can help!
I think there is some codec missing ? Actualy file is rendered properly, as i was manage upload to youtube and there is working fine. Just i can not play on my device. Playback in troubleshoot does not show any issues, windows up to date, can play 4k file etc. My preset in premiere is gopro, quicktime, max render quality
You use QuickTime for your PC? I thought Windows users used something else to play-back videos on their computers. I’m not sure what the native software it’s called. Try opening the videos with a different software, does that play the video?
I have installed quicktime, vlc media player, media classic player, windows media player. No idea what else i could
Very cool
Really helpful, thanks - but incredibly frustrating !!