This works I used scrub daddy / sponge worked much better
@edrisvega74812 күн бұрын
Where can I get the Shirt?
@harrisonnofoa66024 күн бұрын
😂 comedy and learning is a good combination.
@slsutherland14 күн бұрын
everything set up fine but it says it can't connect to Kia Motors? I'm missing some info here..
@skyforge4 күн бұрын
Mine cylinder 4 misfire was caused by my 02 censors on my exhaust. I just replaced the censors and converter myself
@franciscosoto13657 күн бұрын
good video you can learn a lot from this thank you
@MichaeljFalo7 күн бұрын
Too cute...didnt hear a word she said!
@Sourpatch07157 күн бұрын
Thank you ☺️
@kimchee941128 күн бұрын
How many driving days for P0128 to be gone?
@dean2swagg738 күн бұрын
i changed the o2 sensor, spark plug and ignition coil after i changed everything i manually cleared the code and it goes away for about 90 miles and then the light comes back on
@crazy-jake8 күн бұрын
Bad video.
@panchovilla64839 күн бұрын
This company will install the FIXD PREMIUM for later charge you automatically from your account over $8 dollars monthly when you jus setting up the scanner and impossible to cancel. I had to contact PayPal to open a case, and resolved my problem with this funny company!!
@texasRoofDoctor11 күн бұрын
Can anyone explain how to locate the cylinder based upon number ? How to find cylinder 6
@rockstone531313 күн бұрын
could also be low compression on that cylinder. if it's just a miss fire on one cylinder, it would not be a vacuum leak or bad fuel filter that would make a miss fire on all the cylinders, not just one. could also be a valve not seating completely, a bad lifter, or that cylinders rocker arm needing to be adjusted .
@jthiel071114 күн бұрын
Replaced all 4 spark plugs and coils. Had autozone reset the code. Drove 700 miles and now the damn P0302 code is back. Ugh!
@jeffhelton273514 күн бұрын
You are wrong on couple things
@jonmo269414 күн бұрын
Mine was a map sensor and ignition module control.My check engine started blinking when i got to 60 on the highway and i felt some drop in power and the rpms went up and i had to press the gas more, after i finally got in town it started shaking like it was going to stall, i pulled over to a parking lot and restarted it and the second time it stalled.I called a tow. Thats my experience with PO 300 .05 Pontiac grand prix, runs like new again after that $750 fix.
@altafbashir415516 күн бұрын
I still have a po302 after changing the sparkplugs and coil packs on my nissan pulsar 1.2 petrol 2016. Car drives fine for 5 minutes with a missfire then cuts out.
@third_party_zero355018 күн бұрын
Ive chnaged all thise things but yet nothing
@shinobitatsujin113620 күн бұрын
You made no mention of actually cleaning the sensors, and cat. which you can do for 20 bucks and 80% of the time it corrects the issue. Don't tell me you've never heard of CATACLEAN?
@kevstamc367621 күн бұрын
I don't remember asking youtube what a cat converter is and how it works..I want to know what the code is and how to get rid of it -.-
@NoLiesToldTV22 күн бұрын
Well i have the P0300 and the P0122 code which is for the tps sensor which i replaced because it came with the new throttle body i just put on along with spark plugs wires coils 02 sensors map sensor iac valve air filter fuel filter and fuel pump. I have an 02 buick century with over 250,000 miles it idles low and high
@davidwyllie333023 күн бұрын
What a dick...just on with it
@trippmcneally438223 күн бұрын
And lets not forget straight 6 old son
@mwald519424 күн бұрын
Compression test where do you get your prices wow
@billwiebe157924 күн бұрын
Problem with swaping coils is you have to take the intake off, and if you get it wrong, you got to do it all over again like I did
@javoncurry6831Ай бұрын
So here's what I did, I swapped out the ignition coils from bank 1 and bank 2 clean them up with some brake cleaner and the cold went away. So is my problem my ignition coils? I already replaced the spark plugs and the control valve solenoids.
@pastrellejennings8366Ай бұрын
I subscribed just because this video. Educational Straight Forward Useful
@I.be.the.g.Ай бұрын
:)
@nickhyslop5743Ай бұрын
You forgot the the fuel tank pressure switch.
@Jorgehjr22Ай бұрын
Firing order is incorrect
@Jorgehjr22Ай бұрын
No shit sherlock i really a p0307 code would come out of a 4 cyl engine.. PS anyone that replies KEEP DIGGING WATSON FU 2 ... FYI Your FIRING IS WRONG DEWMOSS...
@DrummerDanVaАй бұрын
I got this code on a Mazda 5 less than two weeks after it had been serviced. I found something online and sure enough the tech must have opened the air filter housing to check it and didn't get the entire housing back in its proper place. After making sure everything was secure and clearing the code it has been fine. I check gas mileage every fillup and as long as the car is running fine these codes can be bullsh*t. Another money grab to get you to come in to pay $150 for the dealer to read the codes.
@TheonlytahboiАй бұрын
How do you fix it tho
@sairamgottipati1004Ай бұрын
How did you get these many subscribers. not at all useful vedio dude.
@seanj.mulvaney6367Ай бұрын
Where Ami’s that Simple Fix you promoted with the title of this video.. and every other cylinder video which Btw Are all THE Exact SAME VIDEOs!! Wtf. How annoying and to be straight with you insulting.. as I didn’t hear any simple quick fixes. But a laundry list of somewhat difficult system checks which specialized tools are needed along with the experienced eye of a seasoned mechanic to point out the subtleties of the operation performed and what they are telling him about the misfires and there root causes.
@lukewilson4824Ай бұрын
My Jeep has been throwing this code for 3 plus years. Good thing I live in Florida and they don’t give a crap about inspections.
@StoryShadow380Ай бұрын
There could me many more reasons. Starting with timing chain/belt to electrical issues…
@handymanhoney-do6881Ай бұрын
I’m currently shopping for a used work truck. Surprising how few owners have ever changed coils & plugs. People really expect cars to run forever without maintenance.
@timmy2310Ай бұрын
She’s cute
@ButtaLordАй бұрын
Anyone with a gen 3 eclipse god speed
@clbdycАй бұрын
Replaced all 4 plugs on my 2016 Hyundai Elantra. Still getting the code. They still needed changing though. Saw a thing on another video. Get a low voltage pen. $15 at a hardware store. Touch it to the coil while the engine is running. If the light doesn't come on it's bad.
@violentshemp7776Ай бұрын
hey fixd, will your code reader tell you why the code is present? meaning, can it tell you a wire is broken, sensor failed, etc? can it also tell you that the vehicle has been in an accident that wasn't reported to insurance?
@matth9359Ай бұрын
Fixd tool is garbage from a snake oil company. Topdon top scan is $45 and does way more.
@joseespinoza28302 ай бұрын
Hey people be careful whit this website were they sales this FIXD sensor I buy one last week and they been trying to take money of my debit card I have three charges for $99.00 I been trying to find a contact number for this website or company be careful with this rats 🐀
@kglorysingsyoutube46172 ай бұрын
I have a jeep patriot 2010. Showing some strange lights on the dashboard, which was, """throttle body problem and stability control indicator""" which i knew bfr buying FIXD. After all minutes of scanning and diagnosed it could not it could not help to fixed the problem and not clear all the error lights.
Пікірлер
This works I used scrub daddy / sponge worked much better
Where can I get the Shirt?
😂 comedy and learning is a good combination.
everything set up fine but it says it can't connect to Kia Motors? I'm missing some info here..
Mine cylinder 4 misfire was caused by my 02 censors on my exhaust. I just replaced the censors and converter myself
good video you can learn a lot from this thank you
Too cute...didnt hear a word she said!
Thank you ☺️
How many driving days for P0128 to be gone?
i changed the o2 sensor, spark plug and ignition coil after i changed everything i manually cleared the code and it goes away for about 90 miles and then the light comes back on
Bad video.
This company will install the FIXD PREMIUM for later charge you automatically from your account over $8 dollars monthly when you jus setting up the scanner and impossible to cancel. I had to contact PayPal to open a case, and resolved my problem with this funny company!!
Can anyone explain how to locate the cylinder based upon number ? How to find cylinder 6
could also be low compression on that cylinder. if it's just a miss fire on one cylinder, it would not be a vacuum leak or bad fuel filter that would make a miss fire on all the cylinders, not just one. could also be a valve not seating completely, a bad lifter, or that cylinders rocker arm needing to be adjusted .
Replaced all 4 spark plugs and coils. Had autozone reset the code. Drove 700 miles and now the damn P0302 code is back. Ugh!
You are wrong on couple things
Mine was a map sensor and ignition module control.My check engine started blinking when i got to 60 on the highway and i felt some drop in power and the rpms went up and i had to press the gas more, after i finally got in town it started shaking like it was going to stall, i pulled over to a parking lot and restarted it and the second time it stalled.I called a tow. Thats my experience with PO 300 .05 Pontiac grand prix, runs like new again after that $750 fix.
I still have a po302 after changing the sparkplugs and coil packs on my nissan pulsar 1.2 petrol 2016. Car drives fine for 5 minutes with a missfire then cuts out.
Ive chnaged all thise things but yet nothing
You made no mention of actually cleaning the sensors, and cat. which you can do for 20 bucks and 80% of the time it corrects the issue. Don't tell me you've never heard of CATACLEAN?
I don't remember asking youtube what a cat converter is and how it works..I want to know what the code is and how to get rid of it -.-
Well i have the P0300 and the P0122 code which is for the tps sensor which i replaced because it came with the new throttle body i just put on along with spark plugs wires coils 02 sensors map sensor iac valve air filter fuel filter and fuel pump. I have an 02 buick century with over 250,000 miles it idles low and high
What a dick...just on with it
And lets not forget straight 6 old son
Compression test where do you get your prices wow
Problem with swaping coils is you have to take the intake off, and if you get it wrong, you got to do it all over again like I did
So here's what I did, I swapped out the ignition coils from bank 1 and bank 2 clean them up with some brake cleaner and the cold went away. So is my problem my ignition coils? I already replaced the spark plugs and the control valve solenoids.
I subscribed just because this video. Educational Straight Forward Useful
:)
You forgot the the fuel tank pressure switch.
Firing order is incorrect
No shit sherlock i really a p0307 code would come out of a 4 cyl engine.. PS anyone that replies KEEP DIGGING WATSON FU 2 ... FYI Your FIRING IS WRONG DEWMOSS...
I got this code on a Mazda 5 less than two weeks after it had been serviced. I found something online and sure enough the tech must have opened the air filter housing to check it and didn't get the entire housing back in its proper place. After making sure everything was secure and clearing the code it has been fine. I check gas mileage every fillup and as long as the car is running fine these codes can be bullsh*t. Another money grab to get you to come in to pay $150 for the dealer to read the codes.
How do you fix it tho
How did you get these many subscribers. not at all useful vedio dude.
Where Ami’s that Simple Fix you promoted with the title of this video.. and every other cylinder video which Btw Are all THE Exact SAME VIDEOs!! Wtf. How annoying and to be straight with you insulting.. as I didn’t hear any simple quick fixes. But a laundry list of somewhat difficult system checks which specialized tools are needed along with the experienced eye of a seasoned mechanic to point out the subtleties of the operation performed and what they are telling him about the misfires and there root causes.
My Jeep has been throwing this code for 3 plus years. Good thing I live in Florida and they don’t give a crap about inspections.
There could me many more reasons. Starting with timing chain/belt to electrical issues…
I’m currently shopping for a used work truck. Surprising how few owners have ever changed coils & plugs. People really expect cars to run forever without maintenance.
She’s cute
Anyone with a gen 3 eclipse god speed
Replaced all 4 plugs on my 2016 Hyundai Elantra. Still getting the code. They still needed changing though. Saw a thing on another video. Get a low voltage pen. $15 at a hardware store. Touch it to the coil while the engine is running. If the light doesn't come on it's bad.
hey fixd, will your code reader tell you why the code is present? meaning, can it tell you a wire is broken, sensor failed, etc? can it also tell you that the vehicle has been in an accident that wasn't reported to insurance?
Fixd tool is garbage from a snake oil company. Topdon top scan is $45 and does way more.
Hey people be careful whit this website were they sales this FIXD sensor I buy one last week and they been trying to take money of my debit card I have three charges for $99.00 I been trying to find a contact number for this website or company be careful with this rats 🐀
I have a jeep patriot 2010. Showing some strange lights on the dashboard, which was, """throttle body problem and stability control indicator""" which i knew bfr buying FIXD. After all minutes of scanning and diagnosed it could not it could not help to fixed the problem and not clear all the error lights.
The spark plug was upside down in the diagram😂