Пікірлер

• 
  @RobbyPerezRivera2 күн бұрын

  What wing do you have in your car

• 
  @GenerateLance15 күн бұрын

  I think the adhesive stickers better if you spray both part and fabric then allow to go tacky.

• 
  @kaacpros15 күн бұрын

  Is that a mazdaspeed bumper ? Looks nice

• 
  @Mx5modified15 күн бұрын

  @@kaacpros yes it is 😁 thank you!

• 
  @kgnll8716 күн бұрын

  That aint make no sense

• 
  @Mx5modified15 күн бұрын

  @@kgnll87 what do you mean? 😂

• 
  @kgnll8715 күн бұрын

  @@Mx5modified it's under the hood always and it will get dirty

• 
  @Mx5modified10 күн бұрын

  The bonnet will be up at car shows

• 
  @Tony-fr8fy22 күн бұрын

  Hey man, was your bumper an oem fit? I got the same one for my nc1 and it doesn’t fit right

• 
  @Mx5modified10 күн бұрын

  Hey most of it yeah fit okay. The wheel arches there wasn’t anything to connect it too. Other than that wasn’t too bad. Where are you finding issues?

• 
  @Tbnrplayz1423 күн бұрын

  What roll bar are you running?

• 
  @Mx5modified10 күн бұрын

  It’s a Gc fabrication soft top roll bar

• 
  @fratialessandroАй бұрын

  I bought a new tank to replace mine at 55K (16 years). Any issues with the hoses or the clamps? I was wondering if this should be done after running the engine and then let it sit for a bit to avoid the plastic to be completely dry and cold.

• 
  @Mx5modifiedАй бұрын

  We found all the clamps and hoses to be okay. Had both mine and my brothers done with no issues (Nc1 Mx5s) we tested it and kept checking it to make sure there was no leaks 👍🏻

• 
  @_LiminallАй бұрын

  Hi man! Do they comes pre-mount or do you have to install the spring with the shock absorber?

• 
  @Mx5modifiedАй бұрын

  Hey these come as one assembly. That’s the reason we opted for these ones as we didn’t have to mess about with it all been separate

• 
  @_LiminallАй бұрын

  ​@@Mx5modified thank you! So I don't have to buy new top mount as well very nice 😁

• 
  @ozzyosborn6121Ай бұрын

  Hey just out of curiosity do you think the NC two will require this much work for a good fitment?

• 
  @Mx5modifiedАй бұрын

  Hey I believe it shouldn’t need any work around the headlights as it’s made apparently for the nc2/3 the fitment to the arches probably will need some work

• 
  @ibrahimputra5781Ай бұрын

  Hey man i have nc1 you think this bumper will fit on my nc1?

• 
  @Mx5modifiedАй бұрын

  Hey, mine is a nc1 so will fit will some adjustments. I’ve seen a few people run them on nc1 headlights

• 
  @esco2433Ай бұрын

  can you hear the snap on clip rattling?

• 
  @Mx5modifiedАй бұрын

  I haven’t heard it. It needs to be tight when driving

• 
  @mercsssadisticАй бұрын

  Met you guys at the M40 services, charming bunch of people. Credit card took a hammering that day

• 
  @Mx5modifiedАй бұрын

  Was nice meeting you too 😁 yeah I can imagine haha! Few things I wanted 😂

• 
  @dxme47Ай бұрын

  Nice video and Miata, just happen to have the same problem and found this video, thanks!!

• 
  @Mx5modifiedАй бұрын

  Thank you! Yeah it’s a common issue. Will also be doing a video on cleaning the drain holes and sealing the boot light as they can cause interior leaks

• 
  @jacktaylor8588Ай бұрын

  Anyone know the socials of the guy with the ISR system??

• 
  @Mx5modifiedАй бұрын

  At the bottom right of the video is everyone’s Instagram account.

• 
  @jeff8ballАй бұрын

  Enjoyed watching. Thanks...

• 
  @jeff8ballАй бұрын

  Thanks for the vid. Some nice 5's!

• 
  @Mx5modifiedАй бұрын

  Was a great night and some great 5s 😁

• 
  @TATONKA-THE-ETERNALАй бұрын

  Where did you get the spoiler?

• 
  @Mx5modifiedАй бұрын

  It’s the one you get off eBay.

• 
  @TomhotАй бұрын

  oh damn, I didn't even spot your one I only live 10 minutes down the road so I popped down for 30 minutes, took a peek in mx5parts tent, spent too much money then left haha. I had to park on the hill because I'm not a member.

• 
  @Mx5modifiedАй бұрын

  Yeah we weren’t really in the show properly 😂 even tho it was a display stand haha

• 
  @TheKsharmАй бұрын

  Excellent turnout. Nice to see the cars in the flesh

• 
  @samvickers6162Ай бұрын

  Thanks so much we really appreciate it ☺️ we hope you enjoyed it 😄

• 
  @AMundaneLifeАй бұрын

  gutted i missed this, but hoping to come along to the next one!

• 
  @Mx5modifiedАй бұрын

  Yeah it’s a great evening definitely worth coming 😁

• 
  @lonk9651Ай бұрын

  It was absolutely wicked, thanks for having me !!! (I’m luke btw)

• 
  @samvickers6162Ай бұрын

  We’re so glad you enjoyed it, and thank you so much for joining our stand, we really appreciate it 😄

• 
  @miatajack_Ай бұрын

  What a day 💙

• 
  @samvickers6162Ай бұрын

  Was an amazing time! Thank you for joining 💙

• 
  @jasondixon9095Ай бұрын

  Nice video

• 
  @Mx5modifiedАй бұрын

  Thank you 😁

• 
  @thejdmstashАй бұрын

  Cars all looked great at the event. Nice one all! 🎉

• 
  @Mx5modifiedАй бұрын

  Thank you 😁

• 
  @danielblyth2841Ай бұрын

  Mazda

• 
  @Mx5modifiedАй бұрын

  Mazda

• 
  @sarikarughoobur6596Ай бұрын

  The best car’s number plate is mx55 mod

• 
  @Mx5modifiedАй бұрын

  Thank you that’s mine 😁

• 
  @andypollard7024Ай бұрын

  Thank you guys for an amazing turnout and kind words. ❤

• 
  @marshall_miata5356Ай бұрын

  Thanks to both of you (Jack & Sam) for coming down to sunny east sussex. Can't wait to have you both down again before the summer is out, and make sure you bring more of the northern boys.

• 
  @MX-ModiFivedАй бұрын

  Great video

• 
  @Mx5modifiedАй бұрын

  Thank you 😁

• 
  @angusbloxham6066Ай бұрын

  Thank you so much for making the long trip south and coming along to the Memorial meet/drive as well as making this video, so it is there for not only us at Moneypit5's, John and Matt's family but also for anyone who has followed their stories. They both have youtube channels if anyone wants to look them up, 'MattsMotors' where he has filmed car projects and 'John Lawson' with Caz the Maz. A great tribute video. Nice to see you guys again and see you at the National Rally.

• 
  @Mx5modifiedАй бұрын

  Thanks for all been so welcoming 😁 I’ve now added both there KZread channels into the description thanks for that. Cya at the national!

• 
  @royedwards-ransom7989Ай бұрын

  A fiiting tribute ! Thank you so much @mx5modified for making the journey down, as said at the meet next time you come down we will put you guys up.for the wkend.

• 
  @Mx5modifiedАй бұрын

  Any time!

• 
  @garycongdon5540Ай бұрын

  A fitting tribute, great to meet you guys again. You've done a great job on the video 👏

• 
  @Mx5modifiedАй бұрын

  Thanks! You too!

• 
  @_mattx5_500Ай бұрын

  What a great way to remember them ❤️

• 
  @Mx5modifiedАй бұрын

  Yeah it was mate 🥹

• 
  @jamiegarrod2237Ай бұрын

  Is that southsea

• 
  @Mx5modifiedАй бұрын

  Eastbourne then drive out to seaford

• 
  @earl8590Ай бұрын

  i think this is one of the nicest looking NCs ive ever seen

• 
  @Mx5modifiedАй бұрын

  Thank you! Appreciate it 🙏

• 
  @earl8590Ай бұрын

  @@Mx5modified planning to do some similar mods once i fix the engine 🤣 what front bumper is that if u mind me asking

• 
  @eprohodaАй бұрын

  Mx5modified, Yo, unusual dji-have a good one!😊

• 
  @TheKsharmАй бұрын

  What are you using to hold the camera on the car?

• 
  @Mx5modifiedАй бұрын

  It’s a flat go pro mount. Then added the standard go pro slide mount on and added a go pro- screw mount. Then screwed it from the underside

• 
  @angusbloxham6066Ай бұрын

  Just subscribed. Great video. I like the way you show and subtitle every part of the job in hand. More videos of how to do stuff is always welcome. Also it was great to meet you both at this months Moneypit5's Monthly Breaky Meet and Run. See you at the National Rally.

• 
  @Mx5modifiedАй бұрын

  Thank you appreciate it 🙏 that’s great to hear 😁 yeah we are planning on doing more videos like these. Even the simplest of jobs it’s so much better to have a tutorial so you know what’s involved. Was great meet you guys too! See you there!

• 
  @15DurangoRT2 ай бұрын

  Me no speak Japanese

• 
  @michielvandorsser76912 ай бұрын

  What wheels are that? They are looking pretty good under there. Enkei's? OZ Ultraleggera's?

• 
  @Mx5modified2 ай бұрын

  Hey there are works emotion kiwami 17x8 et47 👌🏻

• 
  @michielvandorsser76912 ай бұрын

  @@Mx5modified They are looking sweet. Thnx man.. Appreciate you getting back to me on that. Going to look into those. Keep it up!

• 
  @InitialB2 ай бұрын

  Pretty jealous of that sorta trip!

• 
  @Mx5modified2 ай бұрын

  It was a amazing trip! One to remember for sure

• 
  @lassydogpie53902 ай бұрын

  Looks like 4-2-1

• 
  @Mx5modified2 ай бұрын

  It’s definitely a 4-1, It’s by gravity you don’t get the longer tubes with them

• 
  @matteocaironi38632 ай бұрын

  sick miatas!! song name, sick too

• 
  @Mx5modified2 ай бұрын

  Thanks! And I’m not sure about the song name was a sound on tiktok Rollers

• 
  @cinnamonroll27432 ай бұрын

  To anyone experience this with an nc1 (or newer maybe) check to make sure the drains behind the driver and passenger seats are not clogged to check grab a strong vacume (if unavailable try going to a car wash and using one there) open the top halfway and their should be one hole just behind the roll bar just stick the nozel as far down inside as possible and suck the debre out repeat on both sides as necessary. If it is the drains it may also leak into the trunk

• 
  @Mx5modified2 ай бұрын

  Yeah these are a problem aswell we will be doing a video on how to clean them 😁

• 
  @cinnamonroll27432 ай бұрын

  @@Mx5modified thats great when i was having this issue i could never find anything on where to even start on the problem so i think these vids will help a lot of people

• 
  @martinbrock64672 ай бұрын

  When is the next meet up? I would love to get to finally meet everyone but its a fair old journey down from Scotland so need to prepare myself.....and the car lol

• 
  @Mx5modified2 ай бұрын

  I’m not sure, they normally do the next meet around August time. If you follow them on Facebook or Instagram. That’s where they will release the event details.

• 
  @jonjonr62 ай бұрын

  I replaced my door speakers and center channel with 3 inch full range Dayton Audio speakers, and a pair of slim mount 6.5 inch woofers. My factory door woofers were the 8 inch Bose. For power, I used a 4 channel amp, with the 3 inchers crossed over at 200hz and up on the front channels, and the woofers crossed over at about 200hz and down on the rear channels. Sounds pretty darn good If you choose to do a center channel, use a 8ohm speaker there, and a mixed bridge capable amp. The run it in bridged mode on the front channels with the other full range speakers.

• 
  @Mx5modified2 ай бұрын

  Bet that sounds amazing! One day I’ll be upgrading my sound system properly and would love a setup like that

• 
  @tonycad60772 ай бұрын

  Good vid first time I have seen the front end of the car lit up on the move ………….

• 
  @Mx5modified2 ай бұрын

  Thank you 😁 which is your car?

• 
  @DavideDeRosa33832 ай бұрын

  3:00 where to find that bumper?

• 
  @Mx5modified2 ай бұрын

  It’s a carbon miata Mazdaspeed replica with carbon parts

• 
  @thejdmstash2 ай бұрын

  Great video dude! 3 hours! I'm happy to be down the road! Your cars looked amazing 👏

• 
  @Mx5modified2 ай бұрын

  Thanks alot mate! Yeah used to doing the long trips now 😂 thank you 😁

• 
  @miatajack_2 ай бұрын

  Made the cut🔥 awesome video

• 
  @Mx5modified2 ай бұрын

  Cheers mate 😁