Пікірлер

• 
  @markboza6215Күн бұрын

  wow i never seen a axle shaft wear that deep!

• 
  @stevenmoser5113 күн бұрын

  Adding a oil stabilizer reduces your additive package in your oil, the reason for the engine knock is because of a stablizer.

• 
  @RATMotoX9 күн бұрын

  Great video! How well is the duplicolor vinyl paint holding up after 3 years? If you were to do this again, would you do anything differently? Thanks!!

• 
  @franksgarage134 күн бұрын

  It's good, everything held up still but the top of the door panels flaked off after a while from rain. I’ll have to do a 3yr review to show it. Thanks for watching!

• 
  @geraldmachado580710 күн бұрын

  Thank you your video. Saved me a lot of headache. Keep up the good work thank you.

• 
  @franksgarage1310 күн бұрын

  Glad it helped. Thanks for watching

• 
  @UnskilledGrappler14 күн бұрын

  Looks good. I think you should have gotten rid of that rust or at least put some converter on it. With just primer and Raptor, it’ll probably be a problem again at some point. Nice work overall. Edit: Man, I just noticed that you didn’t wear a respirator. Not a good choice. Please protect yourself better. That stuff is very poisonous.

• 
  @franksgarage1314 күн бұрын

  Not a bad idea. It’s been about 3 years and still holding up great. Prep is the most important for sure.

• 
  @user-dv7nk7hy3f14 күн бұрын

  Got drive it 300 miles to get the results

• 
  @danielhixson371716 күн бұрын

  Thanks pal...

• 
  @franksgarage1316 күн бұрын

  Happy to help. Thanks for watching.

• 
  @tedjordan903817 күн бұрын

  Dude, I must have watched a hundred videos on removing the front seats and NOBODY mentioned the little lever that tilts the seat forward. You are my hero!

• 
  @franksgarage1316 күн бұрын

  Awesome. Glad I could help. Thanks for watching

• 
  @Mikefidle24 күн бұрын

  Hey. I stumbled onto this post and wanted to see if you could tell me how you were able to order this color? I know it was a few years ago but when I contacted TCP they told me they couldn't help me. I provided them with the number on your can. Wondering if maybe I didn't communicate what I needed so they could provide me with the gunmetal pearl color. Thanks!

• 
  @franksgarage1324 күн бұрын

  Yeah I called TCP and ordered PQ7 tintable bedliner tint/paint back in 2021. You may have to research other companies that sell it

• 
  @isaacriley6264Ай бұрын

  Thank you man this was very helpful

• 
  @rockod8880Ай бұрын

  Grat job what size compressor did you use

• 
  @franksgarage13Ай бұрын

  Thanks for watching! 21 gallon

• 
  @stevenhill22042 ай бұрын

  Thanks for the run through. I have a different problem on my '06 LJ... One of my long-legged sons jammed the driver's seat back so far on the track it won't slide or lift forward. Wish he lived closer so I could give him the tools and have him pull the seat, cuz that is the only way I'm going to be able to get under there and hopefully free it up.🙄

• 
  @gamrkidd2 ай бұрын

  Dammit.. I thought I could fix my TJ passenger seatbelt with this video - it does retract but it does not catch when I pull on it - but the whole cover is missing it doesn’t even have that little ball anymore!

• 
  @user-ue3ef4lg4s2 ай бұрын

  0 back lash??

• 
  @Erviniumd2 ай бұрын

  My fucking MAN I’ve been trying to figure out how to lift the back of the seat up for like an hour. Yours is the first video that actually shows the lever!

• 
  @franksgarage132 ай бұрын

  Hey I’m glad I could help! Thanks for watching!

• 
  @brianharding73692 ай бұрын

  Front right 475° just a little hot. Left about 275°. Always front right apparently. Very thorough video.

• 
  @LarryBowser-iw6js3 ай бұрын

  11:51 I changed my calipers before and I used two rubber hoses cut off and placed over the upper and lower jaws of a pair of small needle nose vise grips to pinch the brake line and it doesn't damage the lines at all makes bleeding a little bit easier.

• 
  @flordemuerto3 ай бұрын

  I hear the same

• 
  @genehughes48503 ай бұрын

  Excellent step by step process...Thank You for taking your time to do this. Epic Job sir! Five Stars.

• 
  @user-ri3bj7wo2y3 ай бұрын

  I have a 1999 TJ currently painted in PQ7 Gunmetal Pearl. I want to do the same as you and paint the same color with Raptor Liner. How many pints did f the base color did you use?

• 
  @franksgarage133 ай бұрын

  Only needed one pint PQ7. Mix 3oz per bottle. Used 4 bottles for a total of 12oz of paint. I might have the other pint leftover if you want it, send me a message back.

• 
  @JoseMartinez-vs1fg3 ай бұрын

  Thanks Bro!!! Its True 100%

• 
  @jorgezuni28183 ай бұрын

  Great video !

• 
  @franksgarage133 ай бұрын

  Glad you enjoyed it. Thanks.

• 
  @leewilliams45193 ай бұрын

  But your original one was a 5 pin

• 
  @bL33ds4 ай бұрын

  What color is that?

• 
  @kcor43 ай бұрын

  Are you deaf?

• 
  @twansnow68204 ай бұрын

  Could you make a video for tightening the chain

• 
  @mitchliggett4 ай бұрын

  Thanks!!!! Much Appreciated!

• 
  @franksgarage134 ай бұрын

  Glad it helped!

• 
  @theydontknow8064 ай бұрын

  Bruh, spot on! Thanks a lot.🤝

• 
  @franksgarage134 ай бұрын

  Glad it helped! Thanks for watching!!

• 
  @isaacb51334 ай бұрын

  It’s the same mechanism for a YJ. the vid actually helped quite a bit I appreciate it

• 
  @franksgarage134 ай бұрын

  Awesome. Glad it helped. Thanks for watching.

• 
  @user-hm8xd7dt8x4 ай бұрын

  Thank you! I couldn’t figure how to get that dang wire out, appreciate the help!!

• 
  @franksgarage134 ай бұрын

  I’m glad this helps. Thanks for watching!

• 
  @yuriyhudz3 ай бұрын

  Same thing 😂 Thanks!

• 
  @tonybernheim83654 ай бұрын

  My idea...No Lucas.. 150,000+ mi.....Valvoline Racing 50W....

• 
  @CraneGuru4 күн бұрын

  Your hurting the engine at start up with that thick of oil the first number represents the thickness while cold running a 50W in the winter months is NOT a good idea The oil will not be able to make it's way through all the smaller oil ports in the engine as well

• 
  @heather_____1824 ай бұрын

  Must not be a 3.7

• 
  @skaterz18694 ай бұрын

  Thank you so much bro saved me a lotta time

• 
  @franksgarage134 ай бұрын

  Great to hear. Glad this helped

• 
  @rprice74944 ай бұрын

  Did you raptor liner your roll bars also?

• 
  @franksgarage134 ай бұрын

  Only the spots that are not covered by the padding

• 
  @pedroaguerrevere91184 ай бұрын

  Thank you for this video. Very hard to see in this little space where the things are. Maybe someone from Liliput can help fix it

• 
  @franksgarage134 ай бұрын

  Glad this video helps. Thanks for watching.

• 
  @Sedge19624 ай бұрын

  As shown here it is completely wrong. You should never add LUCAS straight, but always mix it with the engine oil beforehand and only then fill it in! is also recommended by the LUCAS company!

• 
  @bingobandit4 ай бұрын

  Thanks, just bought a 98 TJ, and didn't know my passenger seat would do that, lot of help, thanks.

• 
  @franksgarage134 ай бұрын

  It’s a great feature. Glad this helped. Thanks for watching!

• 
  @marsdale4 ай бұрын

  saviour

• 
  @franksgarage134 ай бұрын

  Glad this helped. Thanks for watching!

• 
  @rolandbeauphotography88664 ай бұрын

  Thanks, this fixed my issue

• 
  @franksgarage134 ай бұрын

  Awesome. Glad to hear this helped !

• 
  @Red_right_hand14 ай бұрын

  How long did you wait for fully drying?

• 
  @franksgarage134 ай бұрын

  I let it sit in the garage for a few days. It dries fast

• 
  @codyaevans4 ай бұрын

  Thanks for the info. I was gonna say f-it & get new ones, until I saw TJ front seat belt kits are going for $220-$400!!! That’s insane!!

• 
  @franksgarage134 ай бұрын

  Glad this helped!

• 
  @Gunmetalbluejeeptjs5 ай бұрын

  🔥🔥🔥

• 
  @tanikaewell99865 ай бұрын

  @franks garage plesse help

• 
  @tanikaewell99865 ай бұрын

  I judt did this how long does it take yo to work the knocking noise has stopoed but when i oress da gas its a rattling sound still

• 
  @franksgarage135 ай бұрын

  The noise will probably never completely go away but this helps reduce the knock

• 
  @ryansmith2035 ай бұрын

  I bought a 2004 wrangler about a year ago. I have been restoring it and this exact noise started happening. Im so happy and thankful i found this video. Thank you for the detailed and high quality video!

• 
  @franksgarage135 ай бұрын

  I’m happy I could pass on the info! Thanks for watching!

• 
  @HluphiLetsoalo5 ай бұрын

  Can I use it on my Toyota venture

• 
  @franksgarage135 ай бұрын

  Probably yes

• 
  @colingold38215 ай бұрын

  Just had this problem arise on my 97 tj sport..... this video has given me amazing insight. Was this the track lock diff?

• 
  @franksgarage135 ай бұрын

  This is the stock Dana 35 no lockers

• 
  @jamesfairmind22475 ай бұрын

  My TJ is RHD, any idea if a LHD could work just by reversing the polarity on the motor itself? Theoretically it should.

• 
  @franksgarage135 ай бұрын

  Worth a try. Not sure if that works

• 
  @jamesfairmind22475 ай бұрын

  @@franksgarage13 Actually having thought about it I believe it doesn't matter which way the motor turns, it is down to which direction the activator arm is set, so as in most cars like Mercedes, the same motor and gearbox unit can serve RHD or LHD, it is down to the arm mechanism, not the motor.

• 
  @Gunmetalbluejeeptjs5 ай бұрын

  🔥🔥🔥

• 
  @mafigueroa185 ай бұрын

  What did you do to the roll bar? I saw that you only sprayed a few inches on the back and up to the half door… curious if you put the covers back on?

• 
  @franksgarage135 ай бұрын

  Yes, I put the covers back on.

• 
  @the1andonlycw6 ай бұрын

  Thanks for your video. Mine is making that same ticking (kind of diesel sound) as yours at the start of the video. Any idea what that is? Did you fix that?

• 
  @franksgarage136 ай бұрын

  Thanks for watching. I believe that ticking is the lifters. That noise will likely stay unless you do a rebuild, but I have seen and heard of these 4.0 motors lasting with very high mileage. I’m currently at 220,000 miles.