I went to the url for sub parts in the description and it took me to a spyware page direct Apple iPhone support scammers in India . Idk if there is a good working link to get subwoofer parts from if there is please lmk .
@trickheadddАй бұрын
I have a few gems laying around a Rockford power hx2 15” with a bad coil a 12” earthquake San Francisco 1990 competition sub fully functional . A Rockford power hx2 12 with a broken tinsel lead . Another Rockford power hx2 with a cracked basket Also have 2 12” Cerwin Vega 12d4 originals and a Vega 10d4 . I’m looking to do something either repair them all or improve them if possible like the HX2 I know there’s better options for tinsel leads . I’ve never repaired any speakers though so I’m not sure where to begin .
@trollmode3863Ай бұрын
Its 2024 and is this is still one of the best videos for building a subwoofer that I have found on KZread....
@codycrabtree36842 ай бұрын
Thanks
@michaelbaldwin88692 ай бұрын
Do u still fit subwoofer
@joshholden85614 ай бұрын
Do u have 110 mm bolt pattern baskets like a 12 spoke or a adapter that will fit other sizes to 110 mm?
@shawnjohnson28546 ай бұрын
I have a question....I recently was sold one of these 15" silverbacks lloll and its failed up is it worth it to rebuild it or chunk it as a loss and keep on learning...I only give $30 for it and the rubber looks great just voice coil is trashed.....let me know what you would do....thanks a lot
@fatbob29447 ай бұрын
Murphy is real! Glad my interest in speakers came across you. Thanks bro, hope all going well, peace!😊
@stevemaniaci47508 ай бұрын
Nice video dude , i work in restoration , car audio as a hobby. The reason i commented is i work the disaster relief for Hurricane Harvey I was there in Texas helping everybody for like a year and a half. Rebuild . Nice to have found your channel.
@eatngoodtv9 ай бұрын
The original Juggernaut was a DD OEM. Subsequent ones were cloned in China for MMATTS to reduce cost. Thanks for the video. What u up to nowadays? Time for a new video pimp.
@hunterallen253210 ай бұрын
Skipped right over the part I need help with
@G_E_RM_A_N Жыл бұрын
Can I use a 2.5" long winding coil with a 3.3 gap in the motor?
@kingwillie206 Жыл бұрын
💪
@kingwillie206 Жыл бұрын
This is great! 👍
@capitaldesigns-knight Жыл бұрын
Great video and great information brother
@briansouth9325 Жыл бұрын
Is your weight a ham radio dummy load?
@BuddaDrifts Жыл бұрын
billy bang tnite nice
@justinsixx90 Жыл бұрын
Hey dude could you rebuild a Kicker C10? It was frozen when I got it. But I did the drop it on it's face method to get it unlocked, not the coil is scratching/rubbing.
@chemicallust77 Жыл бұрын
It comes with a high quality low tolerance resistor because it matter most in calibration...you want your calibration to be as close to spot on as possible for accurate measurments...if it came with a 10% resistor instead of a 1%...all measurements would be off by that much...pretty big difference
@jamesgrady4253 Жыл бұрын
I got some old steel waters need to be redone
@ally_vc Жыл бұрын
I came to watch a build and went on a whole DJ Magic Mike trip after the intro
@misconductfiles Жыл бұрын
👍👍
@joshholden8561 Жыл бұрын
No one ever says on the leads Wich is positive Wich is negative. Great video.
@joshholden8561 Жыл бұрын
Great info still here in 2022
@joshholden8561 Жыл бұрын
Nice
@brian69frmovale762 жыл бұрын
Thanks for this video. I have done a ton of recones DC , Sundown but never have built one from individual parts well all that will be changing. My biggest question I have for you is will it be easier to build a recone first or build it in place after I get the ring ca'd below the spider and triple joint done.
@puma16442 жыл бұрын
The King of Glue👑🌪
@gregblau80822 жыл бұрын
How do you decide what parts to use and know how they will effect sound, enclosure, etc?
@alexw8902 жыл бұрын
Thanks for this.
@jesusmsanchez46082 жыл бұрын
Hello, could you recommend the glue you use, the one I use is not that good, please?
@davidnewkirk86202 жыл бұрын
Ok
@dcole8082 жыл бұрын
Thanks for sharing...
@christhopherlasher28283 жыл бұрын
Well that sucks I just threw my two Kicker CR-V because this guy that is well-known( EMF speaker guy)on another Channel told me that it couldn't be rebuilt and i should just throw it away! in the comment section haha I held on to those speakers for like 2 years after a stereo shop had blown them with a bad amp installation along with the dd dm 2500 amp
@timcouch50053 жыл бұрын
I am new to reconing speakers and I have watched 100 videos and nobody has broken it down like you and actually explained it the way you do and make it easy for anybody that can read a measurement
@CMDAudio3 жыл бұрын
Thanks bud.
@sweeside2009 Жыл бұрын
I’m lucky then cuz this is the first video I watch and I liked it🤘🏽
@djdtaylor25073 жыл бұрын
Cool Vid Brother, Thanks for taking the time and sharing quality knowledge!!
@CMDAudio3 жыл бұрын
You are welcome my man.
@NandhaKumar-zl6tf3 жыл бұрын
Sir how select gram for add mass
@smproductions32943 жыл бұрын
I dont know your name but thanks a lot CMD Audio. With all the information you provide and what mesurements are needed I was able to mess up a sub and then compete 2 others after. One is still running strong and I blew up the second one I built. So I'm back here again for a refresh course since I need to build this one a third time 😂 this time I'll try to actually follow your directions and build it like a drop in. I was doing it spider and coil into the basket first and if was aligned great then when I put the cone on it pulled to one side a little bit. Just wanted to thank you for this amazing peice of teaching gold this video was.
@kepharolang19843 жыл бұрын
Nice one thumb up
@raoofdawood913 жыл бұрын
Hi... is it possible for me to use the magnet and basket of a midrange speaker to build a 5 inch subwoofer..? If so please may you assist me.. I have very little experience,, but lockdown has made me ambitious..
@carloscortes42293 жыл бұрын
🙋🏻♂️
@DigitalNomad92093 жыл бұрын
I'd like to contact you for a build
@faukawf3 жыл бұрын
I know this is an old post but your math is off. X-Maxx is calculated by how far the speaker will move with the windings still in the gap with a 2-in winding height and 1/2-in top plate you will have 3/4 of an inch of X-Max one way or 19.05mm
@royalwooddecor68033 жыл бұрын
hi please >>> can you tell me what is the exact position for the voice coil inside the magnet like if the magnet thick is 4 cm and the coil winded wire is 2 cm thx
@kilik09083 жыл бұрын
thank you for your work
@redford61103 жыл бұрын
Hey dude i know this is a while ago but your my only help! , so if a 10" basket has a voice coil exit of 3.5" , can you have a 3" coil and a 10" cone with a 3" VCID?
@mihajlogavrilovic16373 жыл бұрын
what glue should i use for voice coil, cone and spider
@paulturner83943 жыл бұрын
I currently have 2 Skar audio TXL 18s. They have the 3.5 coils, 6 spoke baskets. I think the factory cones are the same as what you use in this video. Do you think I could rebuild them with say TI baskets with 10" spiders, with a tall or mega roll surrounds so I could get more xmax? Or would it not be worth the trouble. Just wondering. Thanks.
@stevemaniaci47508 ай бұрын
Sounds like a cool rebuild .
@KingRD-jw7ge4 жыл бұрын
I will have to say your content is amazing sir. Good job and thanks for not hiding any tips or ideas appreciate it so much boss.
Пікірлер
Great job bro ❤️❤️❤️
I went to the url for sub parts in the description and it took me to a spyware page direct Apple iPhone support scammers in India . Idk if there is a good working link to get subwoofer parts from if there is please lmk .
I have a few gems laying around a Rockford power hx2 15” with a bad coil a 12” earthquake San Francisco 1990 competition sub fully functional . A Rockford power hx2 12 with a broken tinsel lead . Another Rockford power hx2 with a cracked basket Also have 2 12” Cerwin Vega 12d4 originals and a Vega 10d4 . I’m looking to do something either repair them all or improve them if possible like the HX2 I know there’s better options for tinsel leads . I’ve never repaired any speakers though so I’m not sure where to begin .
Its 2024 and is this is still one of the best videos for building a subwoofer that I have found on KZread....
Thanks
Do u still fit subwoofer
Do u have 110 mm bolt pattern baskets like a 12 spoke or a adapter that will fit other sizes to 110 mm?
I have a question....I recently was sold one of these 15" silverbacks lloll and its failed up is it worth it to rebuild it or chunk it as a loss and keep on learning...I only give $30 for it and the rubber looks great just voice coil is trashed.....let me know what you would do....thanks a lot
Murphy is real! Glad my interest in speakers came across you. Thanks bro, hope all going well, peace!😊
Nice video dude , i work in restoration , car audio as a hobby. The reason i commented is i work the disaster relief for Hurricane Harvey I was there in Texas helping everybody for like a year and a half. Rebuild . Nice to have found your channel.
The original Juggernaut was a DD OEM. Subsequent ones were cloned in China for MMATTS to reduce cost. Thanks for the video. What u up to nowadays? Time for a new video pimp.
Skipped right over the part I need help with
Can I use a 2.5" long winding coil with a 3.3 gap in the motor?
💪
This is great! 👍
Great video and great information brother
Is your weight a ham radio dummy load?
billy bang tnite nice
Hey dude could you rebuild a Kicker C10? It was frozen when I got it. But I did the drop it on it's face method to get it unlocked, not the coil is scratching/rubbing.
It comes with a high quality low tolerance resistor because it matter most in calibration...you want your calibration to be as close to spot on as possible for accurate measurments...if it came with a 10% resistor instead of a 1%...all measurements would be off by that much...pretty big difference
I got some old steel waters need to be redone
I came to watch a build and went on a whole DJ Magic Mike trip after the intro
👍👍
No one ever says on the leads Wich is positive Wich is negative. Great video.
Great info still here in 2022
Nice
Thanks for this video. I have done a ton of recones DC , Sundown but never have built one from individual parts well all that will be changing. My biggest question I have for you is will it be easier to build a recone first or build it in place after I get the ring ca'd below the spider and triple joint done.
The King of Glue👑🌪
How do you decide what parts to use and know how they will effect sound, enclosure, etc?
Thanks for this.
Hello, could you recommend the glue you use, the one I use is not that good, please?
Ok
Thanks for sharing...
Well that sucks I just threw my two Kicker CR-V because this guy that is well-known( EMF speaker guy)on another Channel told me that it couldn't be rebuilt and i should just throw it away! in the comment section haha I held on to those speakers for like 2 years after a stereo shop had blown them with a bad amp installation along with the dd dm 2500 amp
I am new to reconing speakers and I have watched 100 videos and nobody has broken it down like you and actually explained it the way you do and make it easy for anybody that can read a measurement
Thanks bud.
I’m lucky then cuz this is the first video I watch and I liked it🤘🏽
Cool Vid Brother, Thanks for taking the time and sharing quality knowledge!!
You are welcome my man.
Sir how select gram for add mass
I dont know your name but thanks a lot CMD Audio. With all the information you provide and what mesurements are needed I was able to mess up a sub and then compete 2 others after. One is still running strong and I blew up the second one I built. So I'm back here again for a refresh course since I need to build this one a third time 😂 this time I'll try to actually follow your directions and build it like a drop in. I was doing it spider and coil into the basket first and if was aligned great then when I put the cone on it pulled to one side a little bit. Just wanted to thank you for this amazing peice of teaching gold this video was.
Nice one thumb up
Hi... is it possible for me to use the magnet and basket of a midrange speaker to build a 5 inch subwoofer..? If so please may you assist me.. I have very little experience,, but lockdown has made me ambitious..
🙋🏻♂️
I'd like to contact you for a build
I know this is an old post but your math is off. X-Maxx is calculated by how far the speaker will move with the windings still in the gap with a 2-in winding height and 1/2-in top plate you will have 3/4 of an inch of X-Max one way or 19.05mm
hi please >>> can you tell me what is the exact position for the voice coil inside the magnet like if the magnet thick is 4 cm and the coil winded wire is 2 cm thx
thank you for your work
Hey dude i know this is a while ago but your my only help! , so if a 10" basket has a voice coil exit of 3.5" , can you have a 3" coil and a 10" cone with a 3" VCID?
what glue should i use for voice coil, cone and spider
I currently have 2 Skar audio TXL 18s. They have the 3.5 coils, 6 spoke baskets. I think the factory cones are the same as what you use in this video. Do you think I could rebuild them with say TI baskets with 10" spiders, with a tall or mega roll surrounds so I could get more xmax? Or would it not be worth the trouble. Just wondering. Thanks.
Sounds like a cool rebuild .
I will have to say your content is amazing sir. Good job and thanks for not hiding any tips or ideas appreciate it so much boss.
How about magnet shape