Its 2024 and is this is still one of the best videos for building a subwoofer that I have found on KZread....

I came to watch a build and went on a whole DJ Magic Mike trip after the intro

No one ever says on the leads Wich is positive Wich is negative. Great video.

I am new to reconing speakers and I have watched 100 videos and nobody has broken it down like you and actually explained it the way you do and make it easy for anybody that can read a measurement

@CMDAudio

3 жыл бұрын

Thanks bud.

@sweeside2009

Жыл бұрын

I’m lucky then cuz this is the first video I watch and I liked it🤘🏽

Best video I've seen on youtube so far on building from scratch.

Man this is the most detailed video on KZread!! Thank you so much..

@danielwarbucks2469

3 жыл бұрын

Thanks brother you just started my side work I have subs that are waiting for this . Now I will offer customers custome subs and feel comfortable that the shop can produce multiple options and be well built awsome

@CMDAudio

3 жыл бұрын

@@danielwarbucks2469 You are welcome !!

Great info still here in 2022

CB dummy load as a weight ...I love it!

Great video and great information brother

Subwoofer Parts sent me over to this video when asking about coil placement within the motor. Amazing work man, keep it up!

Man that takes a lot of patience, great video, I'm not sure if you have any videos showing how much wattage the sub can handle but if not you should do one.

I dont know your name but thanks a lot CMD Audio. With all the information you provide and what mesurements are needed I was able to mess up a sub and then compete 2 others after. One is still running strong and I blew up the second one I built. So I'm back here again for a refresh course since I need to build this one a third time 😂 this time I'll try to actually follow your directions and build it like a drop in. I was doing it spider and coil into the basket first and if was aligned great then when I put the cone on it pulled to one side a little bit. Just wanted to thank you for this amazing peice of teaching gold this video was.

Great vid brother detailed and down to business that's hard to find. So many vids might contain the info your looking for but u also have to listen to the person yap about unrelated stuff it bugs the HELL out of me I wish everyone who makes a turorial/how to vid would watch this vid to see what a proper tutorial should look like.

Absolutely fascinating. Awesome video my man.

Cool Vid Brother, Thanks for taking the time and sharing quality knowledge!!

@CMDAudio

3 жыл бұрын

You are welcome my man.

Awesome video bro. That's the first time I've seen a recone video that incorporated the math as well. Keep up the great work.

thank you for your work

Awesome video man Would Love to see more like it.

Very informational brother!this is a great vid!

Thanks this video was amazing cant wait to build my first subwoofer

Great job bro ❤️❤️❤️

Good work boss I’m in the middle of a eclipse rebuild you have me good pointers 👌🏻

Great video!! Keep up the good work..

really good video. Keep up the good work.

this video was so helpful

Great video man

Thank you great video my friend

This vid is awesome thank you!!!!

Thanks

This is great! 👍

excellent video!

thanks for this video man!

I have a few gems laying around a Rockford power hx2 15” with a bad coil a 12” earthquake San Francisco 1990 competition sub fully functional . A Rockford power hx2 12 with a broken tinsel lead . Another Rockford power hx2 with a cracked basket Also have 2 12” Cerwin Vega 12d4 originals and a Vega 10d4 . I’m looking to do something either repair them all or improve them if possible like the HX2 I know there’s better options for tinsel leads . I’ve never repaired any speakers though so I’m not sure where to begin .

FUCK YES BRO! if you are still doing this let me know I would love to learn more from you

Thanks for this video. I have done a ton of recones DC , Sundown but never have built one from individual parts well all that will be changing. My biggest question I have for you is will it be easier to build a recone first or build it in place after I get the ring ca'd below the spider and triple joint done.

Hey dude i know this is a while ago but your my only help! , so if a 10" basket has a voice coil exit of 3.5" , can you have a 3" coil and a 10" cone with a 3" VCID?

Hi... is it possible for me to use the magnet and basket of a midrange speaker to build a 5 inch subwoofer..? If so please may you assist me.. I have very little experience,, but lockdown has made me ambitious..

I got some old steel waters need to be redone

I planning to recone my 12s with the some 12 spoke basket. I'm going for a 2 to 2 1/2 inch Xmax excursion sub. Had a guy with some nsv3 coils that I will be using. The thing is i will be running one inch spacers do to the long coil. Would this math still work in my case? Also any tips on making extend pole piece?

I know this is an old post but your math is off. X-Maxx is calculated by how far the speaker will move with the windings still in the gap with a 2-in winding height and 1/2-in top plate you will have 3/4 of an inch of X-Max one way or 19.05mm

would like to here it and know the wattage as well

It's been like 5 years but hopefully still have this channel where do you get the clamp rings and you know where to get neo magnets or have you ever made one would neo magnets a whole sub.... Thank you in advance

the only part of subwoofer builds everybody misses is soldering the tensile leads to the voice coil and how it attaches to the cone. afterwards you semi showed how you notched the cone but nobody else shows that

@bodhizafa7125

6 жыл бұрын

Springfield Speaker LLC/Simply Speakers both show the full sub build start to finish plus soldering. Simply Speakers also test the finish products in the Vids.

@nuclearbum9858

6 жыл бұрын

i didnt miss it i was going to say that but you said it for me ..he didnt show that part

I know this is old but its a lot of information I have been looking for but 1 thing does concern me on this when you put weight on the cone it pulled the surround down on the former but when you took the weight off the surround actually sprung back up a little so wouldn't that pull your coil up as well ruining your measurement from before with .750 above and below to more like .800+ above and .200 + or - below

Would it be possible to get a video of how to solder the leads?

hi please >>> can you tell me what is the exact position for the voice coil inside the magnet like if the magnet thick is 4 cm and the coil winded wire is 2 cm thx

Can I use a 2.5" long winding coil with a 3.3 gap in the motor?

does a subwoofer have to have more then one spider? or can it just be a 2 layer leaded spider?

what glue should i use for voice coil, cone and spider

I was wondering how you determine the rms ratings for subs you build. I have a basket I want to build on but I don't know what stuff to get to do a nice sub. (1000 rms) HELP PLEASE? LOL

Well damn im no good at math...but what determines RMS watts?

I went to the url for sub parts in the description and it took me to a spyware page direct Apple iPhone support scammers in India . Idk if there is a good working link to get subwoofer parts from if there is please lmk .

what do you charge to build custom subs

subwooferparts site is down ! Ultra Audio on eBay is still options though folks!

how set resonant frequency. which part of subwoofer?

where do you get you parts from?

How do you know on leads which is positive and negative?

@domin8orl943

5 жыл бұрын

Put the coil in the magnet gap and tap a 9v battery on the leads and if the coil pops outwards then the positive terminal of the battery is touching the positive wire on the coil.

How do you determine coil wind/hight/length To make sure you don't bottom or jump gap

@markbooth6577

6 жыл бұрын

\mr cod your project looks very interesting and very teachable. I need someone like you in my Neighborhood. Do you know anybody. Thank you

How about magnet shape

How much do you charge to build one

Make more

Could u help me Rebuild a Zv3 D2???

what epoxy do you use

Where can I buy your subs

What kind of epoxy was that he was using I'm trying to figure out so I can get me some

@KingRD-jw7ge

4 жыл бұрын

I know he taped the glue, why show everything else but the glue smh. But go to Lowe's and get proxy gorrila glue

@ssskinner28

3 жыл бұрын

They use a ca glue for the vc to the cone and usually a black rubber type glue for the cone to frame and dust cap to cone. Look on the lord of bass website they sell it. But it must be a ca glue for the voice coil right after its glued you spritz it with an activator spray I believe

how much for a 15 dual 4ohm?

Skipped right over the part I need help with

Is that intro feel the bass dj magic mike

@isaiahsibert515

3 жыл бұрын

"Feel the bass Again"

How much you charge

Hey man what happened to you?

Is your weight a ham radio dummy load?

how can we figure out voice winding height of subwoffer ?