Пікірлер

• 
  @19jody726 күн бұрын

  Come on, man.. do a real video!

• 
  @666jhoward6 күн бұрын

  wonder if works for f150 frames

• 
  @RomVlad10 күн бұрын

  As a C4 owner, it's good to see the C4 getting some attention.

• 
  @tommitchell842511 күн бұрын

  Passes everything but gas stations 🤡🤡

• 
  @RichardBauer_11 күн бұрын

  Hey, I know that guy in the beginning!

• 
  @musclecarcamaroman909212 күн бұрын

  What did y'all have to do to fix the fuel leakage? I have a foxbody that does the same thing where it pushes gas out of the tank filler neck.

• 
  @ridetechtv12 күн бұрын

  Hi @musclecarcamaroman9092, in our unique case, it was something that was left undone on our end related to the vent portion of the fuel system. All fixed and good to go now!

• 
  @aaronsmith378211 күн бұрын

  We replaced the original filler with a kit from LMR. It's a dry fit from the filler tube into the tank with rubber gasket. That could be where it's leaking.

• 
  @elkay111413 күн бұрын

  How did you know I wanted to listen to your voice more than those ITBs?

• 
  @ridetechtv12 күн бұрын

  Just had a gut feeling I guess, ha!

• 
  @Defnotchodeyo15 күн бұрын

  Might of missed this in the video, I’m in the thick of it right now with my Pontiac. Did you have to replace the factory shocks?

• 
  @xmo55224 күн бұрын

  I met this couple at the 22 or 23 Santa Maria. I was my favorite car there. They weren't there in 2024.

• 
  @CUSTOMWORKS7.3PSD26 күн бұрын

  Seems they no longer even offer this kit any more and link is broke

• 
  @6thavekid19 күн бұрын

  Belltech offers this

• 
  @6thavekid19 күн бұрын

  And rough country

• 
  @Johnshaft197026 күн бұрын

  They Junk 383 Chevy Motor From A Substandard Brand 🙄 ..... Put A Stroked 302 / 351W Ford Engine Back In It.

• 
  @noturdad5354Ай бұрын

  those itb’s look amazing😍

• 
  @joeyguerrero7524Ай бұрын

  Whr yal located ? got an 85 stepside id like this kit installed on

• 
  @user-nu5gd2pf2xАй бұрын

  後ろのCR-Xが気になる。

• 
  @Hellomynameishuman1Ай бұрын

  Fuck the mustang. Check out that crx.

• 
  @justfoundmy10mmАй бұрын

  Car deserves more attention

• 
  @tedg102Ай бұрын

  Purchased the same kit (minus the helper bag & traction bar) and can’t wait until it’s installed. It’s going on a 2021 1500 LT 2WD w/ new 275/50/22 stock takeoffs from a 23 Yukon Denali.

• 
  @davidrose2382Ай бұрын

  Crown vic easier cheaper

• 
  @tedg102Ай бұрын

  What wheel & tire set up is on that truck please?

• 
  @no1but24Ай бұрын

  Nice kit, needs a Coyote, and I would’ve put an electric rack in it.

• 
  @limabravo6065Ай бұрын

  The C4s IRS, suspension, and brakes are worth the price of admission. I just picked up a running and driving 84 with Crossfire Fuel Injection (that manifold with its twin single barrel tbi units is on my shop wall) and im tossing in an Iron LS1 (5.3 punched out with an ls1 rotating assembly) and i want to do something goofy for the transmission after the 700r goes kaboom, im thinking about the 4+3 if theres an upgrade kit for sale somewhere to make it reliable suggestions

• 
  @serbeefheart9964Ай бұрын

  This video is horrible

• 
  @oldways75Ай бұрын

  Does this tool work on rear control arms for A body?

• 
  @ghtrcp7554Ай бұрын

  Will a 28 inch tall tire fit to this system? 275/60/15..mt street ss..

• 
  @ghtrcp7554Ай бұрын

  Can this kit be used with detroit speed welded subframe connectors on a 75 trans am..?

• 
  @thehegt2 ай бұрын

  That bushing remover kits should be $40-$50 not that $135 , $135 its almost the same price with 2 new set of the lower control arm of my vehicle ,

• 
  @rebuildbetter2 ай бұрын

  It's pretty cool that you guys offer a range of performance systems for the car and that it works on both S550 and S650 cars. Are you guys going to be at Hyperfest?

• 
  @ridetechtv2 ай бұрын

  We aim to please! Yes, we'll be at Hyperfest for the show. Keep an eye out for something special we've been working on over the last year or so on track!

• 
  @shacklifecustoms84302 ай бұрын

  And for only 7 grand 😂get the fuck out of here

• 
  @MichelLinschoten2 ай бұрын

  I got the same truck just a clean and lowered. I wish i could do it for the more comfortable ride itself. Unfortunately my tires are too wide

• 
  @juanlpz51892 ай бұрын

  Did you have to roll the front fenders. Or does it rub on tires

• 
  @andrewrafferty80842 ай бұрын

  The rod ends can’t rotate. The rear end can’t twist over bumps. Very very poor design

• 
  @user-fz6qv4ve8v3 ай бұрын

  Time for a rug there Steve

• 
  @JuanMunoz-oj3xn3 ай бұрын

  Need to make a kit affordable for a ford maverick 77 something decent for reasonable price,

• 
  @willmills13703 ай бұрын

  How GM should have made this an option on the WS6 package for the Trans Am or Z28 or SS. Add a 9 inch rear, plus the works and you're golden.

• 
  @kylekeith38093 ай бұрын

  So does this system work with the 4x4 and how much for the complete set up? For my 2013 Chevy Silverado crew cab 1500 5.3 ltz Z71 4x4. Thank in advance and sending love and respect from Canada

• 
  @allengrantham69633 ай бұрын

  Ridetec air management is trash

• 
  @ZeeeBruuuh3 ай бұрын

  ayooo, what that wheel and tire set up?

• 
  @ernestomartinez79763 ай бұрын

  Would i be able to use this if i have a welded notch instead of the bolt on?

• 
  @funhumanusa4 ай бұрын

  Why not tubular control arms? I am thinking about one of these kits. Do I use my current rear sway bar? People have also suggested replacing the steering box with a quick ratio one. 1979 1Oth anniversary WS6, W72 package 20k miles. Going with 18x9 Billet wheels. Stock 4-wheel disks adequate (better rotors and pads)?

• 
  @arthurwilliams89254 ай бұрын

  Pretty cool set up but not very affordable. Not many people can afford to spend $7,000 on a lowering kit.

• 
  @FordEra4 ай бұрын

  What a great video to tell us about this kit! Great job 👏

• 
  @ridetechtv2 ай бұрын

  Thanks @fordera! Appreciate you helping us spread it to your audience! See you at the next show!

• 
  @demonrobertketchie54094 ай бұрын

  Is there a lowering kit for the 2022 Ford F150 Lightning?

• 
  @compa_choo4 ай бұрын

  How low can it go tho? Doesn't look like the rear would allow it to be slammed

• 
  @YoungGun8214 ай бұрын

  I'll assume that lowering this much would stop me from towing? I plan on owning a ~7,000lb travel trailer and trying to see how much I can lower and still tow...

• 
  @blane4thgen2 ай бұрын

  Throw some air bags in

• 
  @AK-ic1yj4 ай бұрын

  Spend 10 thousand dollars on suspension parts for your 500 dollar truck. Be a man.

• 
  @pt_atx4 ай бұрын

  I bought it and I love it!

• 
  @BootsySage2 ай бұрын

  You should make a video about it. Nice ride

• 
  @omerbayrak18084 ай бұрын

  This is definitely one of its kind. You have no idea about comfort if you don't know air suspension

• 
  @lego4x6384 ай бұрын

  do y’all still use belltech drop spindles?

• 
  @drdt44 ай бұрын

  What does a system like this cost with labor. And what kind of time frame are we looking at. This is a cool project. Thanks.

• 
  @user-wl2qc4fk1f5 ай бұрын

  What’s the link to this kit