I am that is. My sword will wield for me. ~Brian Jacques.❤️
@xxskippernate409xx66 ай бұрын
Awesome! Ive been asking blacksmiths about this, they say that you cant. I wish i saw this before i bought my steel anvil, i really like the sound of an iron anvil with a steel face. Thats how a lot of old wrought iron anvils were done, welded steel face.
@caveofskarzs15446 ай бұрын
Glad you enjoyed! There were some surface cracks in the face due to the nature of the wire, but I spoke with the people who bought it some time later and they said it held up well. Still treat it as an experiment! Good luck. 🙂
@tonybryant55247 ай бұрын
They turned out very well ! Nice job boss
@user-vw6mv8ks2h7 ай бұрын
Отличная работа 👍 👍 👍
@mathieudube11838 ай бұрын
Amazing! Thanks so much. My anvil doesn't need this much work but this video is so useful for what I need to do to repair it.
@lwjw31848 ай бұрын
It’s really refreshing to see a regular ol’ blacksmith that gets the job done without having to have a 40X40 fully insulated top of the line shop with $100,000 worth of specialty tools that are only good for one thing. Thank you for showing everyone who is thinking about getting into forging that they can do it.
@caveofskarzs15448 ай бұрын
Thank you for your kind words. The best way to start is to just start. There will always be fantastic tools and shops to desire, but all that is useless without fundamentals, and you can't really appreciate those things until you know what it's like without them.
@lwjw31848 ай бұрын
All that growth in your shop are those extremely rare steel tree’s that you unknowingly planted with metal shavings.
@k725310 ай бұрын
Can you make martin the warrior's shield as well to go with ratdeath
@caveofskarzs154410 ай бұрын
Haha, well, I'm not sure, haven't thought to do that. I'd be more likely to remake the sword, actually, since I know I can do better
@jameswitt108 Жыл бұрын
Man what an awesome sword, you really did the sword of Martin justice.
@anvilrepairs Жыл бұрын
Nice modification, can’t wait to see the Hay budden plans
@rcflightseeker3488 Жыл бұрын
It's good to see new people in the hobby! your tempering only one side of the spine will cause a warp for sure lol.
@caveofskarzs1544 Жыл бұрын
I appreciate the comment. This was many years ago.
@tofuketsuno9768 Жыл бұрын
Impressive but there is an engraving saying I am that is
@caveofskarzs1544 Жыл бұрын
Unfortunately not. I didn't have the equipment to do so at the time. 😝
@tofuketsuno9768 Жыл бұрын
@@caveofskarzs1544 no worries this is still ver cool
@nicholasdimarcelloiii3469 Жыл бұрын
Can i achieve the same results with an oxyacetylene torch?
@N.Cognito Жыл бұрын
So the horns on Vulcan are steel?
@caveofskarzs1544 Жыл бұрын
They are capped with steel, at least, this one was.
@N.Cognito Жыл бұрын
@@caveofskarzs1544 awesome thanks for the info.
@jamesthrift1622 Жыл бұрын
just bought a vulcan 200# with face damage. video was helpful
@aidenallen45182 жыл бұрын
I just bought one of those acciaio anvils for like 137 for an 88lber. and its actually steel. I think if your going to buy a cheep anvil its better to just look around for something thats at least a decentish material
@andymsmith2 жыл бұрын
Why not just replate?
@QuinBarhaug2 жыл бұрын
Make another video on this anvil. Take and fill in the gaps on the side add onto the heal and drill a pritchel hole
@caveofskarzs15442 жыл бұрын
Would if I could! Ended up selling it.
@QuinBarhaug2 жыл бұрын
@@caveofskarzs1544 aww bummer I thought about doing that to my anvil I have the same exact one but i am getting a new one and that one is kinda sentimental. A guy gave it to me for my very first anvil. I’d feel bad to modify it but I wish it were more usable
@QuinBarhaug2 жыл бұрын
@@caveofskarzs1544 but if you ever get to it do it again. But instead of filling in the sides grind off the little lip on top before hand then hard face it and add onto the heal.
@KyznetcCrimeanBlacksmith2 жыл бұрын
👍👍👍
@joshuatichota50462 жыл бұрын
What kind of wood did you use for the handle
@caveofskarzs15442 жыл бұрын
Bloodwood! Guess I may not have mentioned it. There are some other really nice red woods you can find as well. Bloodwood tends to be brittle.
@joshuatichota50462 жыл бұрын
@@caveofskarzs1544 the exact kind I'm about to turn on my lathe for a fire steel handle
@caveofskarzs15442 жыл бұрын
@@joshuatichota5046 Hope it turns out well! It's a beautiful wood.
@jameshall89142 жыл бұрын
Nomcast electrodes! They are the bomb for cast iron! I fixed me broken cast iron vice.Holds like a champ!🤘😜🤘
@SmokeyTheLarge2 жыл бұрын
Im scared of hights, that truly is terrifying i wont lie
@caveofskarzs15442 жыл бұрын
That's only seventeen stories too.
@SmokeyTheLarge2 жыл бұрын
@@caveofskarzs1544 only 17 he says
@Escumbuit772 жыл бұрын
When the brass content of zinc is 37% and more, I think one cannot forge it..
@caveofskarzs15442 жыл бұрын
You're probably right.
@maeus82202 жыл бұрын
Remember to bring a bucket of water to cancel fall damage. Seriously though, glad to see you're still alive, if in occupational hazards.
@sharonshort91402 жыл бұрын
Oh wow this seems like an epic job! A lot of hard work, and a bit adrenaline-spiking? Truly be careful - don’t get hit by anything, and keep your safety equipment inspected and handy and all that! Take care and God bless! :)
@caveofskarzs15442 жыл бұрын
Thank you!
@benjytom73712 жыл бұрын
If I went up there, I'd die, I'm terrible at balancing myself.
@caveofskarzs15442 жыл бұрын
Eh, you'd be fine.
@benjytom73712 жыл бұрын
@@caveofskarzs1544 I mean... I fall/stumble down the stairs about once a week, so...
@jason.25802 жыл бұрын
Holy shit be careful
@caveofskarzs15442 жыл бұрын
Never
@jwhiteker13 жыл бұрын
Can you remember roughly what settings you ended up with on the welder for each wire? I'm doing a very similar one this weekend.
@caveofskarzs15443 жыл бұрын
I'm afraid I don't. I do remember that I turned the heat up pretty high.
@ExtremeCrafter3 жыл бұрын
it looked like a cheese crater in the beginning
@jackass3153 жыл бұрын
pretty sure he mean cast steel>>?
@jerod56363 жыл бұрын
JFC dude. RIP headphone users. When he says he’s doing it at work mute it for 30 seconds or you can kiss your ears goodbye.
@jasonsytsma93673 жыл бұрын
Curious how this anvil has held up? Has it cracked or chipped along the edges?
@caveofskarzs15443 жыл бұрын
I wish I could tell you. I sold it a while back because I needed to downsize my tooling situation. But it held up fine for as long as I had it.
@demastust.22773 жыл бұрын
Very good job for turning that piece of garbage into a proper tool. Vulcans are the lowest quality of old anvil.
@caveofskarzs15443 жыл бұрын
That's my opinion as well. However, I think it's still better having a Vulcan than no anvil at all.
@demastust.22773 жыл бұрын
@@caveofskarzs1544 I would gladly go back to using a sledge hammer in a stump than use a vulcan. I love my 53 lb fisher and my 175 peter wright. I wish my peter-wright was a fisher, though.
@toverublacksmithing91963 жыл бұрын
Does anyone know if you could do this to a 102 pound Peter Wright anvil. The anvil I am talking about is my great grandfather’s anvil and someone tried to fix it with just mild welding wire and they took the rebound and hardness out of it. So I want to know if I should do the same to this one.
@caveofskarzs15443 жыл бұрын
Might check out Essential Craftsman's video on anvil repair. I believe he touched on what to do with a soft anvil. As long as there's enough hardenable material you might be able to reharden it.
@josemejiacortez41653 жыл бұрын
Sell me one I need
@MartinBruleJr3 жыл бұрын
I'm with ya bro, i love using half inch round for tongs. No drawing out reins. work smarter not harder
@allenmays33403 жыл бұрын
With all the cheap cast iron anvils out there, it's good to know they can be made useful. Now I know what to do with the 91 pounds of cast iron I have that is shaped like an anvil.
@charlesjohnson-qc6hj3 жыл бұрын
Jealousy RUN's DEEP in this little world of anvil lovers... All he is doing is showing it can be done,,, not trying to prove anyone wrong or show he's a pro... A little free time project nothing more... People don't'a got'a do it his way... It's short enough to the point... So why any thumbs down at all,,, I can only think they think they'er better.. Truth is he could of done it differently or with different types of wire or what ever... He answered the question he raised,,, and did a good video saying what all he tried that's all... Good vid good job... Now get your ass back to work...
@Neeverseen3 жыл бұрын
6:19 Warning for headphone users
@paragjh2843 жыл бұрын
Very informative. I love it. Actually this was the thing I was searching for for a very long time. Thankyou...
@reiifyrresbjorn1663 жыл бұрын
Hey if you don't want your drill press to get stuck and difficult use wd40 or some kind of lubrication
@bengrosser87223 жыл бұрын
A little hint you will get better results with stainless filler rod the ductility of the nickel helps prevent cracking but not as well as pure nickle
@Gyn-nf1ge3 жыл бұрын
I've been searching for a small century to get this sword! Absolutely beautiful work, wonderful to see other love for this sword <3
@caveofskarzs15443 жыл бұрын
I'm glad to see someone appreciate this. Thank you!
@TheWhatthefuck123 жыл бұрын
FUCKING ASSHOLE ITS 400 AM IN MY HOUSE AND SCUM IS SCREAMING THUMBS DOWN DOUCHE
@caveofskarzs15443 жыл бұрын
Thanks!
@nrnrnrify3 жыл бұрын
"Look how he massacred my boy...."
@TottenCreekFarm3 жыл бұрын
Great job! I've been debating repairing my old Vulcan, it has some pretty bad edge damage, but not as bad as yours. It's a bit of a family heirloom, purchased by my grandfather about 1910, so I've been a bit reluctant to take a chance and possibly ruin it. I have used it the last 20 years or so only for non ferrous metals, but it's really no longer suitable for even that. My biggest concern is delaminating the forged welded steel face since vulcans used such a thin layer... but I think I'm gonna give it a shot.
@caveofskarzs15443 жыл бұрын
Best of luck, my friend!
@malinkowge3 жыл бұрын
To really work brass, you need to work it cold after quenching. Heat it to a dull red, put it in water, then work it. And repeat often. For best results
@Darksunbird Жыл бұрын
indeed same as copper since well it contains copper which work hardens. the more you work it th harder it becomes. you're gonna heat it red ,cool it, work it, and repeat. i think it's superposed to be called fine-smithing i make jewelry from copper and brass. it's a fun hobby
@tyjones89784 жыл бұрын
Hi, so, I followed (as far as I know) exactly what you did on my anvil, and the welds keep poping off. What am I doing wrong?
@caveofskarzs15444 жыл бұрын
Interesting. I can't say I'm an expert on anvil repair, so I can only guess with my limited knowledge. If the welds are popping off, it's possible you may need to adjust the settings of your welder. Otherwise, make sure the anvil is preheated, and have it cool down slowly after you are done. You might also try some dedicated cast iron welding rod for the first layer if you are welding a Vulcan. If none of those work, I'm afraid I'm not sure. Cast iron and wrought iron quality can vary from anvil to anvil.
@tyjones89784 жыл бұрын
I appreciate the advice! My anvil is a Southern Cresent, they have cast body's and steel faces, but when i got mine, it had been "repaired" the untempered super brittle, badly welded face plate broke off on my second project, exposing some extensive damage to the edges very similar to the damage on yours. Two more questions, one is hotter better? Like Should I just heat the anvil up as much as possible? And two if I use nickle alloy rod, would it be easier to weld the steel to the nickel then the cast iron? Again thank you for your help
@caveofskarzs15444 жыл бұрын
@@tyjones8978 Ah, I have seen a couple of those anvils. Didn't know they were cast. Hotter is better with cast iron, but keep in mind that too much will overtemper any steel. As for the nickel rod, I would say weld to the cast iron first then the steel.
@tyjones89784 жыл бұрын
Thank you so much man, I really appreciate the help, every other person I've asked just tells me "it's unfixable" or "you can't weld cast iron" or "that anvil is trash anyway" its nice to see someone really do it
@caveofskarzs15444 жыл бұрын
@@tyjones8978It Couldn't Be Done by Edgar Albert Guest is a great inspiration for me. ;D
@kentuckytrapper7804 жыл бұрын
8hr lunch break, great job you got there, nice looking anvil.
@MrWill90024 жыл бұрын
BEAUTIFUL!!! (Side fact: that badger lord who made it is named Boar (after four tree types in Mossflower: Beech, Oak, Ash, Rowan)
Пікірлер
I am that is. My sword will wield for me. ~Brian Jacques.❤️
Awesome! Ive been asking blacksmiths about this, they say that you cant. I wish i saw this before i bought my steel anvil, i really like the sound of an iron anvil with a steel face. Thats how a lot of old wrought iron anvils were done, welded steel face.
Glad you enjoyed! There were some surface cracks in the face due to the nature of the wire, but I spoke with the people who bought it some time later and they said it held up well. Still treat it as an experiment! Good luck. 🙂
They turned out very well ! Nice job boss
Отличная работа 👍 👍 👍
Amazing! Thanks so much. My anvil doesn't need this much work but this video is so useful for what I need to do to repair it.
It’s really refreshing to see a regular ol’ blacksmith that gets the job done without having to have a 40X40 fully insulated top of the line shop with $100,000 worth of specialty tools that are only good for one thing. Thank you for showing everyone who is thinking about getting into forging that they can do it.
Thank you for your kind words. The best way to start is to just start. There will always be fantastic tools and shops to desire, but all that is useless without fundamentals, and you can't really appreciate those things until you know what it's like without them.
All that growth in your shop are those extremely rare steel tree’s that you unknowingly planted with metal shavings.
Can you make martin the warrior's shield as well to go with ratdeath
Haha, well, I'm not sure, haven't thought to do that. I'd be more likely to remake the sword, actually, since I know I can do better
Man what an awesome sword, you really did the sword of Martin justice.
Nice modification, can’t wait to see the Hay budden plans
It's good to see new people in the hobby! your tempering only one side of the spine will cause a warp for sure lol.
I appreciate the comment. This was many years ago.
Impressive but there is an engraving saying I am that is
Unfortunately not. I didn't have the equipment to do so at the time. 😝
@@caveofskarzs1544 no worries this is still ver cool
Can i achieve the same results with an oxyacetylene torch?
So the horns on Vulcan are steel?
They are capped with steel, at least, this one was.
@@caveofskarzs1544 awesome thanks for the info.
just bought a vulcan 200# with face damage. video was helpful
I just bought one of those acciaio anvils for like 137 for an 88lber. and its actually steel. I think if your going to buy a cheep anvil its better to just look around for something thats at least a decentish material
Why not just replate?
Make another video on this anvil. Take and fill in the gaps on the side add onto the heal and drill a pritchel hole
Would if I could! Ended up selling it.
@@caveofskarzs1544 aww bummer I thought about doing that to my anvil I have the same exact one but i am getting a new one and that one is kinda sentimental. A guy gave it to me for my very first anvil. I’d feel bad to modify it but I wish it were more usable
@@caveofskarzs1544 but if you ever get to it do it again. But instead of filling in the sides grind off the little lip on top before hand then hard face it and add onto the heal.
👍👍👍
What kind of wood did you use for the handle
Bloodwood! Guess I may not have mentioned it. There are some other really nice red woods you can find as well. Bloodwood tends to be brittle.
@@caveofskarzs1544 the exact kind I'm about to turn on my lathe for a fire steel handle
@@joshuatichota5046 Hope it turns out well! It's a beautiful wood.
Nomcast electrodes! They are the bomb for cast iron! I fixed me broken cast iron vice.Holds like a champ!🤘😜🤘
Im scared of hights, that truly is terrifying i wont lie
That's only seventeen stories too.
@@caveofskarzs1544 only 17 he says
When the brass content of zinc is 37% and more, I think one cannot forge it..
You're probably right.
Remember to bring a bucket of water to cancel fall damage. Seriously though, glad to see you're still alive, if in occupational hazards.
Oh wow this seems like an epic job! A lot of hard work, and a bit adrenaline-spiking? Truly be careful - don’t get hit by anything, and keep your safety equipment inspected and handy and all that! Take care and God bless! :)
Thank you!
If I went up there, I'd die, I'm terrible at balancing myself.
Eh, you'd be fine.
@@caveofskarzs1544 I mean... I fall/stumble down the stairs about once a week, so...
Holy shit be careful
Never
Can you remember roughly what settings you ended up with on the welder for each wire? I'm doing a very similar one this weekend.
I'm afraid I don't. I do remember that I turned the heat up pretty high.
it looked like a cheese crater in the beginning
pretty sure he mean cast steel>>?
JFC dude. RIP headphone users. When he says he’s doing it at work mute it for 30 seconds or you can kiss your ears goodbye.
Curious how this anvil has held up? Has it cracked or chipped along the edges?
I wish I could tell you. I sold it a while back because I needed to downsize my tooling situation. But it held up fine for as long as I had it.
Very good job for turning that piece of garbage into a proper tool. Vulcans are the lowest quality of old anvil.
That's my opinion as well. However, I think it's still better having a Vulcan than no anvil at all.
@@caveofskarzs1544 I would gladly go back to using a sledge hammer in a stump than use a vulcan. I love my 53 lb fisher and my 175 peter wright. I wish my peter-wright was a fisher, though.
Does anyone know if you could do this to a 102 pound Peter Wright anvil. The anvil I am talking about is my great grandfather’s anvil and someone tried to fix it with just mild welding wire and they took the rebound and hardness out of it. So I want to know if I should do the same to this one.
Might check out Essential Craftsman's video on anvil repair. I believe he touched on what to do with a soft anvil. As long as there's enough hardenable material you might be able to reharden it.
Sell me one I need
I'm with ya bro, i love using half inch round for tongs. No drawing out reins. work smarter not harder
With all the cheap cast iron anvils out there, it's good to know they can be made useful. Now I know what to do with the 91 pounds of cast iron I have that is shaped like an anvil.
Jealousy RUN's DEEP in this little world of anvil lovers... All he is doing is showing it can be done,,, not trying to prove anyone wrong or show he's a pro... A little free time project nothing more... People don't'a got'a do it his way... It's short enough to the point... So why any thumbs down at all,,, I can only think they think they'er better.. Truth is he could of done it differently or with different types of wire or what ever... He answered the question he raised,,, and did a good video saying what all he tried that's all... Good vid good job... Now get your ass back to work...
6:19 Warning for headphone users
Very informative. I love it. Actually this was the thing I was searching for for a very long time. Thankyou...
Hey if you don't want your drill press to get stuck and difficult use wd40 or some kind of lubrication
A little hint you will get better results with stainless filler rod the ductility of the nickel helps prevent cracking but not as well as pure nickle
I've been searching for a small century to get this sword! Absolutely beautiful work, wonderful to see other love for this sword <3
I'm glad to see someone appreciate this. Thank you!
FUCKING ASSHOLE ITS 400 AM IN MY HOUSE AND SCUM IS SCREAMING THUMBS DOWN DOUCHE
Thanks!
"Look how he massacred my boy...."
Great job! I've been debating repairing my old Vulcan, it has some pretty bad edge damage, but not as bad as yours. It's a bit of a family heirloom, purchased by my grandfather about 1910, so I've been a bit reluctant to take a chance and possibly ruin it. I have used it the last 20 years or so only for non ferrous metals, but it's really no longer suitable for even that. My biggest concern is delaminating the forged welded steel face since vulcans used such a thin layer... but I think I'm gonna give it a shot.
Best of luck, my friend!
To really work brass, you need to work it cold after quenching. Heat it to a dull red, put it in water, then work it. And repeat often. For best results
indeed same as copper since well it contains copper which work hardens. the more you work it th harder it becomes. you're gonna heat it red ,cool it, work it, and repeat. i think it's superposed to be called fine-smithing i make jewelry from copper and brass. it's a fun hobby
Hi, so, I followed (as far as I know) exactly what you did on my anvil, and the welds keep poping off. What am I doing wrong?
Interesting. I can't say I'm an expert on anvil repair, so I can only guess with my limited knowledge. If the welds are popping off, it's possible you may need to adjust the settings of your welder. Otherwise, make sure the anvil is preheated, and have it cool down slowly after you are done. You might also try some dedicated cast iron welding rod for the first layer if you are welding a Vulcan. If none of those work, I'm afraid I'm not sure. Cast iron and wrought iron quality can vary from anvil to anvil.
I appreciate the advice! My anvil is a Southern Cresent, they have cast body's and steel faces, but when i got mine, it had been "repaired" the untempered super brittle, badly welded face plate broke off on my second project, exposing some extensive damage to the edges very similar to the damage on yours. Two more questions, one is hotter better? Like Should I just heat the anvil up as much as possible? And two if I use nickle alloy rod, would it be easier to weld the steel to the nickel then the cast iron? Again thank you for your help
@@tyjones8978 Ah, I have seen a couple of those anvils. Didn't know they were cast. Hotter is better with cast iron, but keep in mind that too much will overtemper any steel. As for the nickel rod, I would say weld to the cast iron first then the steel.
Thank you so much man, I really appreciate the help, every other person I've asked just tells me "it's unfixable" or "you can't weld cast iron" or "that anvil is trash anyway" its nice to see someone really do it
@@tyjones8978It Couldn't Be Done by Edgar Albert Guest is a great inspiration for me. ;D
8hr lunch break, great job you got there, nice looking anvil.
BEAUTIFUL!!! (Side fact: that badger lord who made it is named Boar (after four tree types in Mossflower: Beech, Oak, Ash, Rowan)