I am trying to make guides that are short and only contain the necessary information to get things up and running. The thinking being: Once you have something that works, you are able to play with it and learn new things.
In the future i wish to do other types of projects where i explain more and also doing different things like simple robotics.
Пікірлер
Thanks bro that helps me alot. Great stuff here. You have earned a subscriber
Happy I could help! nd hopefully, I get time to make more videos so I can keep you as a subscriber!
AI voice must be a fan of Star Wars as it pronounces WAN like Obi wan! 🚀
A mix between AI and being trained on my non native English voice. Fun to have tried, but ultimately, more hastle than it was worth to me.
A video that goes straight to the point and explains exactly what you need in less than a minute. THANK YOU
Exactly what I was missing when it comes to guides! Thank you for the feedback!
Thank you for this video.
I'm glad it was useful to you! Thank you for the message!
Tell us a little about an defguard - open-source solution with real WireGuard MFA/2FA & integrated OpenID Connect SSO. I have a vps with a white address, as well as a domain that is linked to cloudflare.
That looks awesome! I have had to take down my lab for a little bit, but once I have it up again. I have to test that system. Thank you for mentioning to me!
Great video but after watching this and been testing around myself I just wanna inform that the video doesn't use any key and therefore no encryption is used, you can see there is a red shield and not a green one in top of the windows at time 7:38, to get it properly setup and get your green shield instead you must fill in the key in the client before connecting. A command to get your key: sudo docker logs hbbs | grep Key [2024-07-05 08:56:42.962076 +00:00] INFO [src/rendezvous_server.rs:1191] Key: ABCABCABC123123123 Then simply copy ABCABCABC123123123 to your client network setup. Thanks for the video and good luck.
ive got a minipc with 2 ethernet ports, and one is used to access proxmox, so i cannot use it in the openwrt vm?
Sure you can! What I would do is to have the same interface you access Proxmox with as WAN for openwrt, then you can easily add Proxmox to the LAN side when you have gotten the router up and running.
Your the GOAT
Haha, thank you! I really appreciate messages like this!
Thanks so much for the video. I'm very new to Linux but your steps seemed like everything went well until I tried to connect to a machine. Once I enter the remote ID and attempt to connect it says: "Connection error key mismatch." Any idea what this could be? thanks so much!
Hello! It has been a long time since I was troubleshooting this program, but i remember getting an error if one machine used the local IP address and another machine used the external IP address. If you have Discord you can share some images of settings on the server i have linked in the description and i will try to see if i can find an error.
Easy to follow and understand. Thank you!!
Thank you for the feedback! I'm glad the video was helpful!
I have Windows 11 installed on a Physical drive where in i would like to convert to VHDk file and then import to Proxmox, so the will i be able to import the vhdk file as per the guide you have mentioned
I have not tried converting everything, but as far as I know, you should be able to convert most things!
Thank you for this video! Very easy to follow. Only thing I would add is that you do not have to wipe the drive (@4:00) as you can just click the ➡ under storage, file systems to mount an existing file system so that you do not lose all you precious data.
Happy it helped you out and thank you for the feedback! When I set it up I had to do a full format because it was previously used for Windows, but I should have made that clear!
And I was looking for the command line solutions... Thank you, mate.
I plan on making one for adding to LXC or linux server doing it completely in terminal, but that's a bit late for helping out now.
Fire picture
Jo takk du, men hva gjør du oppe så sent. Det er viktig å hvile hodet når man har fagprøve! :-)
@@Divgitally Jobbet sent måtte fikse noe greier med fagprøven 😅
Er ikke lett å sovne når man har en stor og viktig oppgave hengende over seg!
how are you? What are your plans for the channel? It is very pleasant and informative to listen to you
Hello! I'm happy to hear from you! I'm good. How about you? For now I have a few smaller projects I wish to do, but i should be done with CCNA instructor training in August which takes up quite a lot of time outside work. I don't have any plans for the long run at the moment. I have a few ideas for ways to go with the channel, but have yet to sit down and actually make a proper plan :-)
Hi, I missed you ;)
Feels good to upload something again! :-)
Amazing video man!! Working great, thanks!!!
I'm happy you like the video! Thank you for the message!
veldig nyttig guide :)
Takk for meldingen! Bra du syns den var nyttig! :-)
Thanks for the guide. Confirmed these steps work 2024 on svr2022.
Hi , dumb Q. do i need vlan switch here using OVS?
Hello there. Not stupid at all! It really depends on what you want to do. If you just want to have multiple VLAN's on Proxmox and share one VLAN out, you do not need anything other than a unmanaged switch. You just need it if you wish to have multiple VLAN's out from Proxmox.
@@Divgitally thnks for your reply. yeah i have proxmox on my intel nuc which has single LAN. and i also have manged switch capable of vlan. if im going to add multiple vm with vlans, i want to try this OVS. would it work? i think this one would be the solution for having a single NIC. Can you please help me out. 😃 in proxmox single NIC, im running pfsense, i just dont kniw how to integrate coin wifi hotspot on vlan22. and sometimes i just want try out another firewall and vms like opnsense, openwrt, and so on. Thank you!
It is absolutely possible to do with one nic, but you will need to set up one VLAN on your switch for WAN and one or more for your LAN side. Then, all VLANS need to be trunked to the port where your Proxmox and pfSense router is connected. All VLAN's need to be on the same physical interface you have on Proxmox. There are some others I have spoken with on the Discord server I set up that has done the same as you want to do. There is a link to it in the video description if you wish to hop on there. It is just a bit easier to follow up there. There are plenty of good routers and firewall's to virtualize and play with! OPNsense is similar to pfSense. OpenWRT is more of a router compared to the two others.
@@Divgitally Thank you bro! appreciate it ! 🍻
" Good tutorial!!! If you want to encrypt the connection between your client and remote host, follow these steps: For 'hbbs' and 'hbbr', be sure to add '-k _'. For example: hbbs -r "server ip address":21117 -k _ hbbr -k _ To secure the connection, take the contents of 'id_ed25519.pub' and add it to RustDesk's 'id/relay' config section. Put this public key in the 'key' on the client. You should then have a secure connection."
I feel so lost.. I found out I need proxmox after already setting up my nas and I cannot find a complete guide for anything. I am very new, but I am trying... Do I need to start over to use proxmox with OMV and Cloudflare? I don''t expect a full how to as a response, but if someone could give me an order of operations or a map of how things are going to line up, I would be eternally grateful. I am trying to setup a home nas that I can sync my photos and videos from my phone when I am away from home. Technology stack: Odroid HC4 16gb sdcard 2x 4tb Ultrastar NAS Armbian direct on HC4 OMV 7 installed direct to Armbian on HC4 OMV plugin for photoprism already installed and running Purchased Photosync bundle/premium on android Already acquired Domain Cloudflare installed direct to Armbian on HC4 - supposed to be better/easier than running reverse proxy - Stopped setup when the guide told me to use proxmox, that was "already setup" Current status: The tutorial I found for cloudflare says I now need proxmox.... the proxmox tutorial says for me to install OMV from proxmox... At this point I am going in circles and I don't want to start something that will make me have to start from the beginning. Does Anyone have a order of operations for this?
You do not need proxmox for cloudflare! You can run what's needed with Docker on your SBC. Seems like a cool project! If you come to the discord server Linked in the description I can more easily follow up trying to help you!
For LXC 🙄.....
Hello! Could i ask you what type of USB you wish to connect. Storage, network or something else? I want to make more videos, but time has been an issue for a good long while now.
@@Divgitally Hi USB 3.0 nede this für Syncthing and for OMV
How to configure vlan on mikrotik virtualized proxmox sir?
Hello! The Proxmox side should be similar, but i have not used the Mikrotik router enough to say anything about how to do that, but if you join the Discord server i have in the video description and share some images from the UI I could try to help you!
Great video m8. I only have one network interface (auto created bridge vmbr0 that I plan to use for the wan) and I dont understand the part that you say I can just use the default one for the second one (the lan). Should I make a virtual bridge and leave everything blank?
I'm happy the video somewhat helped you! This might help you the rest of the way: kzread.info/dash/bejne/fWWWqM6ilNjYl7Q.htmlsi=aVFa_3fGcUDHgldC There is a term for what you want to do which is router on a stick. Just in case you need to search for something and I am slow to answer.
thank you great video , could you please help me , i cant get ping betwen the vlans....
Hello! I'm glad it somewhat helped! If you have Discord, you can hop on the server i have and share a screenshot of the rules you have set up so i can more easily see whats up! The invite is in the video description.
i ma trying to access pf through my home nat network is that possible
If you use it as your router, there is a setting where you can enable access to the gui from WAN. I recommend you dont do that and use something like a VPN instead. Not sure if I understood you correctly, so go ahead and correct me if I'm wrong
@@Divgitally hi thanks for your reply so i could give you like a breake down of what i have have some issue which has been driving me crazy, i have proxmox on my server and only have two nic ports , i used one for t-he management port on proxmox and the other is what i have left to run pf sesne , this is my set up i create a bridge without an ip address the second nic as a slave port and create a bridge which is connected to nothing and use it as my lan port , my issue now is that when i complete installation nd want to access pf sesne with e wan ip address it doesn't allow me, is there something i am missing and is there a way i can walk through it
@@Divgitally and just to clearify i am using this as a router for my home lab , but i also want to be able to connect to it through vpn when i am not home
@@teesec3978 ok. What you can do is setting it up like a router on a stick, but then what you need is a switch that can handle VLAN's. We have been through it with a guy doing something similar on the Discord server i set up. But in broad strokes, you set up something like VLAN 10 on 2 ports. one "access" for WAN and one "trunk" port with all VLAN's to use with pfSense. With pfSense up and running, create something like VLAN 20 for LAN that you set all other ports as access. I have done that to test myself, but I screw up to much to have that be a viable way so i just use a USB nic for either the management or WAN interface. For VPN you can take a look at tailscale or twingate. They can be a bit annoying at times, but useful when they work as intended.
@@Divgitally can i get access to the discord group so we can talk more
Note he didn't show how to passthrough USB devices for LXC containers in Proxmox.
Noted.
what about moving VM's between nodes?
That is actually pretty annoying. I want to make a video on it one day. So far, I have been lazy and just set up a Proxmox backup server and added it to both nodes. Back up the VM, then restore it on the other node. It can easily be done when they are clustered, but don't do that unless you actually plan on having them in a cluster.
@@Divgitally i've a cluster with 2 nodes - so basically two hardware pieces (laptops) so how to move this?
@@vklab24 Apologies, but i don't remember and i am currently not running any clusters. I like to be able to kill nodes without the extra cleanup. a quick google search didn't give me much so i should setup a cluster and make a video about it. I have a bit under a week and ill be done with my exam (Hopefully) and can start making videos again.
You write to first use the following command to update: (`pwd`/docker/rustdesk:/root) I then get the following message: -bash: /home/ubuntu/docker/rustdesk:/root: No such file or directory What am I doing wrong?
That is wierd. It should make the directories itself, but you can try to make the directories yourself "/docker/rustdesk" and then run the command again.
Thanks for useful information.
Thank you for the message! Good luck with the setup if you decide to do that!
Nice video! Very detailed. Thank you so much Keep it up bro ! 🥰🥰🥰
Hello. Thank you for the kind words! I really appreciate that you took the time! 😀
Thanks for making this great video.❤❤. Please make a video on, how to add proxmox vms to this GNS3 instance.
Hello. Thank you for the message! That seems like a fun idea. I should also have made a video on how to properly connect to the GNS3 network with outside resources. Once I finish a certification I'm working on i will hopefully get to make more videos!
Hi Bro I have a router provided by my ISP its a fibre based, it has 4 ports one is for fibre-optic cable which comes from ISP. Other 2 are LAN ports one is connected to my PC via LAN cable & a telephone port nothing connected to it . Can I configure pfsense on my PC. Also what do I need to do physically on it like which port is required etc..?
Hello, there are a few ways you can set up pfSense or other firewalls to use at your home. I would recommend it if possible you would use another machine which can be on all the time, but that is up to what you want to do. When it comes to the ISP router, you can either disable routing on it and let pfSense handle that. This is called router on a stick. You can also do like what I have done and set the ISP router into bridge mode, which let's you use your own router as the only router, but then you need to have 2 network interfaces. If I get some more details on equipment and what you want, I can try to help say more about what you can do. Just as a side thing. ESXi is being removed from the homelab marked, so I would recommend Proxmox instead if you wish to virtualize you router.
I did press F10 but nothing happened
You also held down the shift key when pressing F10?
Thank you! That was just what I needed.
I'm happy to hear that! Good luck in your virtualization adventure!
Can you scp directly in to a storage container first and then use the disk to make a VM ?
I have not tried that myeself, but i don't see why it should not work!
Thank you very much, very useful
Hello! I'm happy you found it useful and thank you for the message!
AI Voice
That is correct. I did it to test synthesizing my voice. Fun to try, but not something I wanted to keep doing. What I used is mentioned in the video description.
I installed mikrotik in proxmox and And want to utilizee 1-512 VLANs on a single port. So do I need to create these interfaces one by one 512 times? Or is there any shorter command?
Hello! There might be a way to do it more quickly, but I don't know it. I can try to take a look later. Can I ask you why you need that many VLAN's? I have never seen that many VLAN's in use at one time in a setup.
@@Divgitally I'm admin at internet provider, so we are segregating our zones by vlan. So we required even more than 512 as our network spans over entire country.
@@faizansirajuddin Cool! That makes sense! from what i can see, the command below is used to generate a vlan. An option is to generate all the commands using something like excel for example, then copying them (first to notepad because Excel can be annoying) into the CLI. You might get away with pushing 20 or more commands at a time, but i cant promise that. /interface vlan add vlan-id=50 interface=ether2 name=ether2-vlan50 I don't have any better tips for doing that at the moment best of luck to you and I'm here or Discord if you need me!
@Divgitally Regards! Another issue I encountered when virtualizing Mikrotik on Proxmox is that it behaves strangely with PPPOE users-users connect occasionally and disconnect others. especially when using vlans to host numerous PPPOE servers. I set up a dhcp server on the same VLAN to confirm that it was operational. However, when switching to PPPoE on the same VLAN, requests occasionally get through and occasionally don't. Using CCR resolved this issue for me.
@@faizansirajuddinThank you for sharing! I have personally just used it in a minor setup, but it would really be interesting to learn more about your setup! Can i ask about the spec's on your machine?
Great video! Is it possible to use pfsense with only one hw NIC and a vlan switch in front? And then tag all connections throughout my network?
Happy you like it! Yes, it is absolutely possible to do a setup like that. That is called router on a stick. You will still need you ISP router to be the gateway router in that case, but it is very doable! There is a guy on the discord server doing exactly that. If you run into issues, you can hop on there to ask. Best of luck!
Thank you so much for sharing! I followed your other video using Oracle but my instance went down last night. I switched to pay as you go and got a new instance back up and working. I also followed this tutorial and created the CT on my Dell T630 we have at our office. Is it possible to use no noip like in the oracle tutoral with the methond you used here to allow access out of network? I would like to use my home computer to access my work computer
Hello! I'm happy you found the video useful! Weird that it went down on Oracle cloud though! Just be careful when it comes to pay as you go. Oracle seems to have soime of the less expensive plans, but it can quickly add up! You can absolutely use noip to reach your home! many home routers even have it's own ddns tab where you can add the provider, user and address you wish to use. I can't say much about ISP routers, but all the routers i have used over the years over the years have that function! If you run into any issues, just send a printscreen on the Discord server and I'll take a look!
Is there a way to access the rustcloud web GUI from this method?
As long as the ports are open, you should be able to connect to that, but I think you need the paid versjon for that.
Hi, Excellent video, Thank you so much, !!!!!
Thank you for the comment! I'm glad the video could help you!
NO-IP free is a pain to use. They make you confirm from an email or login and confirm every month or they delete your DDNS. DuckDNS is another free one that works well and is super easy. I thing Google also does it
So if I have a router from my isp and I want to run opnsense as my router/firewall in proxmox do I turn my isp router into a dummy router basically and have all dhcp and stuff run on opnsense? Also how will it get my Wi-Fi signal would I need a wireless ap or my isp router will still give me Wi-Fi is where I’m lost ap.
Hello! The way I run it at home is to just set the ISP router into bridge mode which makes it a dumb box that just passes through the signal and gives my virtual router the WAN IP. With that setup you will need an access point or a wifi router you can set into AP mode. You could in theory setup a OPNsense firewall and then have the DHCP server run there, but you would lose the function of the firewall and generate a lot of headaches for yourself. Best of luck to you!
I only have one network card, so I can only create one bridge. Should I just add the same bridge twice to the VM?
That is one way of doing it, but then you need to have another router like your ISP router be set as the gateway. This approach is called router on a stick.
I have a ONT already to turn fiber optics into ethernet. I added the second bridge with VLAN tag 6 and it worked! I am wondering, you mention that’s one way. Which other ways is there to accomplish this with just one network card?
@avillp if you want to use a virtual router, but only have one network interface, it is able to just have the ISP router be the gateway to route traffic to the web by disabling the DHCP server there, then setting that up on your virtual router
Epic 👍
Thanks! I appreciate the message!
Does this mean I won't have an internet connection if I set the gateway to the pfsense on each of my devices?
That is correct. Sorry for the late reply! I would on pfSense set your router that is connected to WAN to be the gateway.
or you can buy a cheap tplink manage switch and create a vlan dedicated for wan tag and untagged to pfsense vlan tag.
Thank you for a short video that clearly explains what is in the subject! I'm stuck connecting a USB device from HP ProDesk400 box, through proxmox VE, to ubuntu server vm, and finally to be used with adb for reformatting an old Fire tablet. Any help would be appreciated.
Hello. Thank you for the message and sorry for the late reply! When I connected a phone last, it had to be open and I had to accept the connection from the phone to get it working. I have not had a Fire tablet, but it will probably have similar issues. I'm quite late now, but did you get it working?