this pc case only good for 6 + 2 efficiency core processor or bellow
@yoyoyo4162 күн бұрын
Asus is the only one that doesn't make cheap, plastic looking cards.
@sleekbeaksheek2 күн бұрын
Maraming salamat po kuya, this case isn't so accessible dito sa Canada but I bought on FB market. Your build helped me navigate it more efficiently, had some trouble with my AXP120-X67 fitment but got it sorted with good cable management.
@enmaenmaenma1232 күн бұрын
285w pala to. Not bad not bad
@shk1per7772 күн бұрын
does the memory overclock well?
@manongunboxing2 күн бұрын
With my G.skill, it wasn’t able to do so.
@AndreGuerrieri3 күн бұрын
I just got this same mobo and i can't even get it to post. I tried AMD 7600 and 7500F. I'm using G.Skill Flare X5 RAM. After watching a bunch of YT videos. I'm going to try different RAM. I've seen builds use TEAMGROUP & Crucial. I see you used G.Skill Trident Z5 and you at least posted. I have the BOOT & GPU debug lights on. Maybe i got a DOA mobo...
@AlexHusTech4 күн бұрын
Nice, my colorful 4060 came today
@sc94335 күн бұрын
weird. i have the same motherboard. i can expo 6400mhz. pbo curve optimizer -30 pbo +200 mhz. ryzen 7 7700
@AndreGuerrieri3 күн бұрын
What RAM are you using?
@manongunboxing2 күн бұрын
Good for you 🙂 I’m not so lucky and for some as well.
@tanmay55705 күн бұрын
Many reviewers have suggested Single sided Hynix A die memory for proper memory OC
@manongunboxing2 күн бұрын
Good for them 🙂 Hopefully jginyue will publish the tested RAM in their site.
@Oakyman6 күн бұрын
Just built mine with Ryzen 7 7700 and 4070 Ti Super, sure, it's hot like HELL!!
@enmaenmaenma1237 күн бұрын
nako pre salamat talaga sa pagiging alay sateng mga kapwa pinoy haha
@rendericeib45137 күн бұрын
thanks, thats why they sell it cheaper on aliexpress haha
@mr.pangetako8 күн бұрын
If you’re looking for reliable products, you should stick to known brands. Anyway this is a Chinese brand.
@joshuadecear50028 күн бұрын
Hello manong! Ithink you can tune its xmp profiles manually. Lookup miyconst hardware's tutorial as to how. He was able to do so with a Jingyue b550i mobo. Anyways, great vid as always👍
@cecilchan19888 күн бұрын
Thats a different board though. And its issues didnt get fixed for 1 year from release lol
@AlexHusTech8 күн бұрын
*Great video, I love these different parts from Aliexpress, I have a Maxsun B650.*
@ndig019888 күн бұрын
unscrew IO shield on the GPU, insert GPU then screw in the IO shield = profit!
@FutanariNeko7 күн бұрын
i do this into my RX 6600XT MERC 308, and works !
@envy-27228 күн бұрын
nice review manong, been curious about this mobo for a while now hahaha.
@mtaufiqn50408 күн бұрын
This is the cheapest am5 itx mobo that i have found here in indonesia but it also lacks feature that i need so i did not choose this
@AlexHusTech8 күн бұрын
Which one did you choose? I have the Maxsun B650 MATX, I might go for a Colorful B650 next as it has more features.
@mtaufiqn50408 күн бұрын
@@AlexHusTech i prefer asrock b650e itx or wait for new am5 motherboard, i heard amd recently released x870 mobo, i hope they will also release b850 mobo too
@jnbulana63028 күн бұрын
love the review , straight to the point
@SaerosXXI8 күн бұрын
I’m building a mini ITX PC with the same case, but I’m still waiting for the parts to arrive. I’ve chosen a Ryzen 5500, a Gigabyte A520I AC, and a white MSI Ventus RTX 4060 for my build. Since I’ve never built a mini ITX PC before, I’m sure this video will be very helpful. Thanks! 👍
@Lurkatron11 күн бұрын
Was this stock fan curves and no undervolt?
@manongunboxing11 күн бұрын
Both yes.
@Lurkatron11 күн бұрын
@@manongunboxing cool thank you
@rohanchooramun728811 күн бұрын
Please try the new Adt-Link R43UH pcie 4.0 as well. Including software process how to make it work.
@Renosyb13 күн бұрын
This is rx550 case
@falexandrino13 күн бұрын
Nice video man!! Do you think a 190x180mm motherboard fits on this case? I have a AsRock H310M HDV
@manongunboxing13 күн бұрын
Thank you but sadly, no it will not fit. H310M-HDV is an MATX motherboard -- too tall and too wide.
@yourheartpiercer414 күн бұрын
I really appreciate your review and teardown of the gpu sir, however nagdadalawang isip ako if I would purchase this over an RX 5500 XT. The same store prices the latter at 5.9k pesos. Although I keep reading from reviews online that the 5500 XT only has cooler temps but is superceded by the 590 in performance. Would you prefer the 5500 XT over this ba? Thank you po in advance!
@manongunboxing14 күн бұрын
I’d go for 5500xt. Mas tahimik din yan at mas power efficient. Make sure lang din sir na 8gb.
@yourheartpiercer414 күн бұрын
@@manongunboxing okay thank you for your insights po sir! Subscribed to your channel for more benchmarks and builds :DDD
@darryl.a15 күн бұрын
Nice channel. mas interesting sakin yung mag review ka ng knock offs ng grahpics card ng china nakakatawa kasi e. hahahaha
@needlethread471517 күн бұрын
kamusta na po sir itong gpu now?
@manongunboxing16 күн бұрын
deads na po pero may isa pong nagcomment dito, 2 years na daw kanya. hit and miss I guess 🙂
@genetalavera425615 күн бұрын
@@manongunboxing Anong psu gamit mo dun sa aisurix gpu mo bossing
@manongunboxing15 күн бұрын
Seasonic 1200W platinum po
@jasonlikecake17 күн бұрын
Great video man! I never even thought about plugging in the front IO first before screwing in the motherboard
@gerwazyprotazyloszo17 күн бұрын
The standoffs are for to thick gpus or to tall cpu collers. You can put them in the side panel mounting holes. It makes the case 3 to 4 milimeters thicker. It is mantioned on the pictures on aliexpress for the t40 for example, if you take a closer look. :) I think it is not so stupid. You can fit taler collers and it propobly makes for a little more airflow. Ofcourse if you dont minde the gaps around the panels. Would be interesting to se how it looks.
@manongunboxing17 күн бұрын
Thanks for the clarification! I’ll post a pic in the community page before I dismantle the build, it is applicable to me as I used a taller cooler and just let it bulge. This will look better imho, rather than a curved bulge.
@cakeisalie17 күн бұрын
as usual, upfront and direct to the point! thank you manong!
@MrJakut8817 күн бұрын
Cool review 👍 thanks 2 u
@kingguthix18 күн бұрын
baliktad po yung fan nyo sa cpu, since sobrang liit ng space sa loob much better na hindi pa exaust ang setup, wala kayong fan na pa pasok ang air puros palabas
@manongunboxing18 күн бұрын
Originally, intake po yung fan ko 02:59. Grill nasa likod for Noctua NF-A12x15, papasok / downdraft sya sa CPU. Pero I tested everything (08:29) as benefit of doubt dahil kahit usual config e hindi performing. Hope this clarifies.
@patty108619 күн бұрын
thanks for the video friend
@hellopo521819 күн бұрын
Hi, can you give a review to their newer version of rx 580. Thanks!
@sc943320 күн бұрын
with a little mod, i think it can fit a sfx psu instead.
@manongunboxing20 күн бұрын
😲 on the gpu side?
@warnacokelat20 күн бұрын
80c+ on open bench? You're right to lump these tier as 200W+.
@At0mic_fr21 күн бұрын
May driver po ba sya na nvidia?
@manongunboxing21 күн бұрын
Yes, normal drivers for gt1030 will work po
@rerolledDK21 күн бұрын
This video saved me from potentially sabotaging my build. My original plan was to use this cooler with a Gigabyte A520i AC motherboard, Ryzen 5800x, and S300 case. However, after I had already ordered the IS-55 cooler, the Gigabyte B550i Aorus pro AX motherboard went on sale on Amazon for a very tempting price. ($169 with free shipping to Philippines and no customs fees. Still ongoing at the time of this comment). Thankfully, I ran into this video before pulling the trigger on the Aorus. I stuck with my original plan and had no problem mounting the IS-55 in the non-protruding orientation on the A520i AC. That having been said, the S300 might actually have enough room for the protruding orientation - though whether or not that would affect the ability to have the bottom exhaust fan, I cannot say.
@johnreyseno793022 күн бұрын
Where can we buy this case sir?
@manongunboxing21 күн бұрын
Hmmm… sadly currently out of stock from the store that I bought from, and it’s hard to find now. If you’re a Filipino, add to wishlist in InWin Lazmall and hope they restock.
@johnreyseno793022 күн бұрын
How much is the cost for this build?
@manongunboxing18 күн бұрын
hi, this is around 60K PHP but the components are old so you may want to consider newer components as well
@darwinsgameml716423 күн бұрын
my honest review on this gpu, im using it in 2 years until now im using it, its i very good gpu for budget meal like me but not recommend in heavy games coz temp. goes to 80 degree up to.. but in using office like photoshop and adobe premiere no problem at all... very good gpu 😊
@manongunboxing21 күн бұрын
I’m genuinely happy that you got a good one 🙂
@indrahaseo23 күн бұрын
Bluetooth adapter are no needed for now on or RX 6000 series is still better than RX 7000 series lol
@kuyamoarf25 күн бұрын
try the jginyue b650i night devil
@manongunboxing21 күн бұрын
Coming soon
@kuyamoarf21 күн бұрын
@@manongunboxing thank you because i have that mobo and there's a problem with ram compatibility
@manongunboxing18 күн бұрын
Well, video is not yet released, but I did ran to the same issue with EXPO enabled. Skip EXPO for Jginyue.
@kuyamoarf17 күн бұрын
@@manongunboxing thank you sir, nag kaka problema sya pag nka 6000M/Ts ang oc ng ram, nag rreeboot sya from time to time and sometimes hindi na sya nag bboot
@asdfw34526 күн бұрын
Not so informative. Author even hadnt done downvolting and powerlimiting whis is a must in ALL ITX cases, Even more he forgot to install 2 case fans which need to be bought separately. Oh and a Dust filter... R U serious??? Never use dust filter in itx!!! Instead use blowing machine once in year which is pretty easy with this size. The Case actually really good. but u need to know how to use itx hardware.
@manongunboxing25 күн бұрын
If I need to undervolt, i’ll just buy a more competent case. I sold this case in FB marketplace and he was so unsatisfied that he bought another case from me. Never use dust filter - if it’s an included accessory, it is expected to be used and tested. Otherwise, don’t include one, like meshroom. If you think this is a good case, that’s fine but I would never recommend such to this day. Really the worst case that I’ve tested.
@ericzhang926126 күн бұрын
i dont liek the red part
@newretrotech27 күн бұрын
I just finished a build with this case but I used an RTX 4060 single fan instead. I'm very happy with the end results but I'm a bit worried about the upgrade potential of it, 4060 it's nice but I'd like to get something more powerful in the future...
@manongunboxing27 күн бұрын
Valid concern. I think there is a small GPU every generation in the 50 or 60 class tier. So I don’t think you’d run out of GPU in the future. However, that’s likely the cap for this case - 60 class. I doubt that a 70 class would fit.
@newretrotech27 күн бұрын
@@manongunboxing I'll probably have to upgrade to a bigger one on the 22~25mm range. Either that or I'll try to mod the T40 myself with some mobo standoffs. Do you have any recommendations on slightly bigger cases?
@mikesean806227 күн бұрын
Pa help naman po nag dadalwang isip po ako, meron po ako pagpipilian this a520i na model na to vs b550m-itx/ac asrock The a520i is around 5k din vs asrock is nasa 7.5k. Ang processor ko po is ryzen 5 3600 paired with rx6600 Ano pong mas wise choice. Will do 99% gaming only.
@mikesean806227 күн бұрын
PS: d po ako mag ooverclock
@manongunboxing25 күн бұрын
Sorry for the late reply. Personally I’d go with b550 para gen 4 din po.
Пікірлер
is the cpu cooler in intake?
Boss okay din ba 'to sa editing?
With Davinci Resolve, yes. With Adobe, not sure
Nice unboxing, very informative
this pc case only good for 6 + 2 efficiency core processor or bellow
Asus is the only one that doesn't make cheap, plastic looking cards.
Maraming salamat po kuya, this case isn't so accessible dito sa Canada but I bought on FB market. Your build helped me navigate it more efficiently, had some trouble with my AXP120-X67 fitment but got it sorted with good cable management.
285w pala to. Not bad not bad
does the memory overclock well?
With my G.skill, it wasn’t able to do so.
I just got this same mobo and i can't even get it to post. I tried AMD 7600 and 7500F. I'm using G.Skill Flare X5 RAM. After watching a bunch of YT videos. I'm going to try different RAM. I've seen builds use TEAMGROUP & Crucial. I see you used G.Skill Trident Z5 and you at least posted. I have the BOOT & GPU debug lights on. Maybe i got a DOA mobo...
Nice, my colorful 4060 came today
weird. i have the same motherboard. i can expo 6400mhz. pbo curve optimizer -30 pbo +200 mhz. ryzen 7 7700
What RAM are you using?
Good for you 🙂 I’m not so lucky and for some as well.
Many reviewers have suggested Single sided Hynix A die memory for proper memory OC
Good for them 🙂 Hopefully jginyue will publish the tested RAM in their site.
Just built mine with Ryzen 7 7700 and 4070 Ti Super, sure, it's hot like HELL!!
nako pre salamat talaga sa pagiging alay sateng mga kapwa pinoy haha
thanks, thats why they sell it cheaper on aliexpress haha
If you’re looking for reliable products, you should stick to known brands. Anyway this is a Chinese brand.
Hello manong! Ithink you can tune its xmp profiles manually. Lookup miyconst hardware's tutorial as to how. He was able to do so with a Jingyue b550i mobo. Anyways, great vid as always👍
Thats a different board though. And its issues didnt get fixed for 1 year from release lol
*Great video, I love these different parts from Aliexpress, I have a Maxsun B650.*
unscrew IO shield on the GPU, insert GPU then screw in the IO shield = profit!
i do this into my RX 6600XT MERC 308, and works !
nice review manong, been curious about this mobo for a while now hahaha.
This is the cheapest am5 itx mobo that i have found here in indonesia but it also lacks feature that i need so i did not choose this
Which one did you choose? I have the Maxsun B650 MATX, I might go for a Colorful B650 next as it has more features.
@@AlexHusTech i prefer asrock b650e itx or wait for new am5 motherboard, i heard amd recently released x870 mobo, i hope they will also release b850 mobo too
love the review , straight to the point
I’m building a mini ITX PC with the same case, but I’m still waiting for the parts to arrive. I’ve chosen a Ryzen 5500, a Gigabyte A520I AC, and a white MSI Ventus RTX 4060 for my build. Since I’ve never built a mini ITX PC before, I’m sure this video will be very helpful. Thanks! 👍
Was this stock fan curves and no undervolt?
Both yes.
@@manongunboxing cool thank you
Please try the new Adt-Link R43UH pcie 4.0 as well. Including software process how to make it work.
This is rx550 case
Nice video man!! Do you think a 190x180mm motherboard fits on this case? I have a AsRock H310M HDV
Thank you but sadly, no it will not fit. H310M-HDV is an MATX motherboard -- too tall and too wide.
I really appreciate your review and teardown of the gpu sir, however nagdadalawang isip ako if I would purchase this over an RX 5500 XT. The same store prices the latter at 5.9k pesos. Although I keep reading from reviews online that the 5500 XT only has cooler temps but is superceded by the 590 in performance. Would you prefer the 5500 XT over this ba? Thank you po in advance!
I’d go for 5500xt. Mas tahimik din yan at mas power efficient. Make sure lang din sir na 8gb.
@@manongunboxing okay thank you for your insights po sir! Subscribed to your channel for more benchmarks and builds :DDD
Nice channel. mas interesting sakin yung mag review ka ng knock offs ng grahpics card ng china nakakatawa kasi e. hahahaha
kamusta na po sir itong gpu now?
deads na po pero may isa pong nagcomment dito, 2 years na daw kanya. hit and miss I guess 🙂
@@manongunboxing Anong psu gamit mo dun sa aisurix gpu mo bossing
Seasonic 1200W platinum po
Great video man! I never even thought about plugging in the front IO first before screwing in the motherboard
The standoffs are for to thick gpus or to tall cpu collers. You can put them in the side panel mounting holes. It makes the case 3 to 4 milimeters thicker. It is mantioned on the pictures on aliexpress for the t40 for example, if you take a closer look. :) I think it is not so stupid. You can fit taler collers and it propobly makes for a little more airflow. Ofcourse if you dont minde the gaps around the panels. Would be interesting to se how it looks.
Thanks for the clarification! I’ll post a pic in the community page before I dismantle the build, it is applicable to me as I used a taller cooler and just let it bulge. This will look better imho, rather than a curved bulge.
as usual, upfront and direct to the point! thank you manong!
Cool review 👍 thanks 2 u
baliktad po yung fan nyo sa cpu, since sobrang liit ng space sa loob much better na hindi pa exaust ang setup, wala kayong fan na pa pasok ang air puros palabas
Originally, intake po yung fan ko 02:59. Grill nasa likod for Noctua NF-A12x15, papasok / downdraft sya sa CPU. Pero I tested everything (08:29) as benefit of doubt dahil kahit usual config e hindi performing. Hope this clarifies.
thanks for the video friend
Hi, can you give a review to their newer version of rx 580. Thanks!
with a little mod, i think it can fit a sfx psu instead.
😲 on the gpu side?
80c+ on open bench? You're right to lump these tier as 200W+.
May driver po ba sya na nvidia?
Yes, normal drivers for gt1030 will work po
This video saved me from potentially sabotaging my build. My original plan was to use this cooler with a Gigabyte A520i AC motherboard, Ryzen 5800x, and S300 case. However, after I had already ordered the IS-55 cooler, the Gigabyte B550i Aorus pro AX motherboard went on sale on Amazon for a very tempting price. ($169 with free shipping to Philippines and no customs fees. Still ongoing at the time of this comment). Thankfully, I ran into this video before pulling the trigger on the Aorus. I stuck with my original plan and had no problem mounting the IS-55 in the non-protruding orientation on the A520i AC. That having been said, the S300 might actually have enough room for the protruding orientation - though whether or not that would affect the ability to have the bottom exhaust fan, I cannot say.
Where can we buy this case sir?
Hmmm… sadly currently out of stock from the store that I bought from, and it’s hard to find now. If you’re a Filipino, add to wishlist in InWin Lazmall and hope they restock.
How much is the cost for this build?
hi, this is around 60K PHP but the components are old so you may want to consider newer components as well
my honest review on this gpu, im using it in 2 years until now im using it, its i very good gpu for budget meal like me but not recommend in heavy games coz temp. goes to 80 degree up to.. but in using office like photoshop and adobe premiere no problem at all... very good gpu 😊
I’m genuinely happy that you got a good one 🙂
Bluetooth adapter are no needed for now on or RX 6000 series is still better than RX 7000 series lol
try the jginyue b650i night devil
Coming soon
@@manongunboxing thank you because i have that mobo and there's a problem with ram compatibility
Well, video is not yet released, but I did ran to the same issue with EXPO enabled. Skip EXPO for Jginyue.
@@manongunboxing thank you sir, nag kaka problema sya pag nka 6000M/Ts ang oc ng ram, nag rreeboot sya from time to time and sometimes hindi na sya nag bboot
Not so informative. Author even hadnt done downvolting and powerlimiting whis is a must in ALL ITX cases, Even more he forgot to install 2 case fans which need to be bought separately. Oh and a Dust filter... R U serious??? Never use dust filter in itx!!! Instead use blowing machine once in year which is pretty easy with this size. The Case actually really good. but u need to know how to use itx hardware.
If I need to undervolt, i’ll just buy a more competent case. I sold this case in FB marketplace and he was so unsatisfied that he bought another case from me. Never use dust filter - if it’s an included accessory, it is expected to be used and tested. Otherwise, don’t include one, like meshroom. If you think this is a good case, that’s fine but I would never recommend such to this day. Really the worst case that I’ve tested.
i dont liek the red part
I just finished a build with this case but I used an RTX 4060 single fan instead. I'm very happy with the end results but I'm a bit worried about the upgrade potential of it, 4060 it's nice but I'd like to get something more powerful in the future...
Valid concern. I think there is a small GPU every generation in the 50 or 60 class tier. So I don’t think you’d run out of GPU in the future. However, that’s likely the cap for this case - 60 class. I doubt that a 70 class would fit.
@@manongunboxing I'll probably have to upgrade to a bigger one on the 22~25mm range. Either that or I'll try to mod the T40 myself with some mobo standoffs. Do you have any recommendations on slightly bigger cases?
Pa help naman po nag dadalwang isip po ako, meron po ako pagpipilian this a520i na model na to vs b550m-itx/ac asrock The a520i is around 5k din vs asrock is nasa 7.5k. Ang processor ko po is ryzen 5 3600 paired with rx6600 Ano pong mas wise choice. Will do 99% gaming only.
PS: d po ako mag ooverclock
Sorry for the late reply. Personally I’d go with b550 para gen 4 din po.