S400 | A 10.8L SFF ITX Build
Ойын-сауық
October 2023 SFF build
Shopee: shopee.ph/10.8L-Portable-S400...
Lazada: www.lazada.com.ph/products/s4...
Also known as:
1. Shiny Scale S400
2. Flashscale S400
3. KXRORS S400
Components:
Case: S400
Processor: Ryzen 7 5800X
GPU: Asus ROG Strix RTX 4070 / Gigabyte RTX 3060 Gaming OC
Motherboard: Gigabyte B550I Aorus Pro AX
RAM: Kingston Fury Beast 32GB 3200MT/s CL16
CPU Cooler: Alpenfohn Blackridge
PSU: FSP Dagger Pro 850W Gold
00:00 Intro and Case Overview
01:47 Case panels / accessories
02:21 Build proper
04:28 Troubles and troubleshooting
04:35 Configurations tested overview
05:01 Temp Benchmarks
06:27 Cons
07:08 Pros
07:35 Suggestion to Buyers
07:59 Overall recommendation
08:14 Recommendation vs NR200P
08:30 Outro and Outtakes
#itx
#sffpc
#s400
Buy me a coffee: www.buymeacoffee.com/manong
------------------------------
Lost In Thought by Ghostrifter Official bit.ly/ghostrifter-sc
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/3QY18la
Music promoted by Audio Library • Lost In Thought - Ghos...
------------------------------
------------------------------
Happy by MusicbyAden / musicbyaden
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/happy-musicbyaden
Music promoted by Audio Library • Happy - MusicbyAden (N...
------------------------------
------------------------------
Aural Nights by MusicbyAden / musicbyaden
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/-aural-nights
Music promoted by Audio Library • Aural Nights - Musicby...
------------------------------
Subscribe for more unboxing
Пікірлер: 66
Nice video! The month long wait is def worth it.
Nice video manong.
Maganda talaga GPU compatibility ng case na to kaso yung temps talaga. Great content
This is my favorite sandwich style ITX case within 11 L. Can fit high end GPUs no problem and can handle midrange CPU heat.
Hint: You can also take the case completely apart, because no rivets are being used anywhere. Thus installation becomes much easier (albeit still a bit complicated).
@lavone5541
2 ай бұрын
Could you clarify your build method if you build it that way? Any tips would help! Im super new with pc. So the tiny case space makes assembly hard. You recommend to just take the case apart. Does that mean I first assemble the motherboard on the case's bottom, connect the psu wires, and then connect the gpu with the riser? Lastly, install the walls around them and place the psu in the bracket? Is that the correct method?
@deezllamas3907
2 ай бұрын
Is albeit a real word?
@lavone5541
2 ай бұрын
@@deezllamas3907 ask google
@okamisamakun
Күн бұрын
@@deezllamas3907 Lil bro, may internet ka na. Isang simpleng google search makikita mo na yung sagot sa tanong mo 😭😭😭
more review kuys. 👌
Interested to know how this does with all fans pointing as exhaust so that you'll have a negative pressure system that sucks air from both sides and exhausts it out the top and bottom.
@manongunboxing
6 ай бұрын
hi, sorry as I may not be able to get back to this case. Though it may help depending on the GPU. For the CPU, I don't think it will help that much.
May nakapag build na dto using scythe big shuriken 3? 65mm kasi ung sa spec sheet pero 67mm ata height cooler.. plan ko sana lipat bahay pa-s400
Also known as: Miningeek Neo S400 (on Amazon Europe / Germany).
Great vid, build ended up looking very nice. I'm considering getting this case, but I have a 66 mm cooler (noctua nh l12 ghost s1) which is just 1 mm over the maximum the manufacturer says. Do you think it would fit? I'm already using a sama im 01 case with is already small, but I want an even smaller one like this one.
@manongunboxing
5 ай бұрын
Just make sure you get the 65mm cpu cooler clearance version. This here only has 60mm cpu cooler clearance. The cooler that I put had a total of 62mm... There was a slight bulge but manageable.
Can you fully disassemble this case? I'm interested on dissable capabilities for international travel.
@manongunboxing
2 ай бұрын
Didn't really try but it seems like it. I didn't find rivets.
Ordered this one. Hopefully the axp60x57 thermalright can fit. Btw what is your pcie riser? Will a 90 degrees riser be compatible with the case?
@NectarGaming
7 ай бұрын
*axp90
@manongunboxing
7 ай бұрын
Use dual reverse riser. 180 male and 180 female. This is the "common" riser for sandwich style cases.
@NectarGaming
7 ай бұрын
@@manongunboxing thanks manong, last na ito how long is the pcie riser na gamit nyo for comparison lang cause amazon has great deals for this sff
@manongunboxing
7 ай бұрын
185mm po.
@NectarGaming
7 ай бұрын
@@manongunboxing maraming salamat manong!!!
hi…what is the cooler fan size that you used on top?im planing to cut part of top to fit AIO cooler
@manongunboxing
5 ай бұрын
It's a 120mm slim fan. 120x120x15mm Overall cooler height was 62mm
will Thermalright AXP90-X47 Pure Copper fit into this case?
@manongunboxing
Ай бұрын
Yes. That’s 47mm, the case can fit up to 60mm, sometimes 65mm
hello, can you remove the back panel to install graphic card?
@manongunboxing
2 ай бұрын
If I understand your question correctly, the answer is yes. All panels in S400 are screwed rather than riveted.
Hello, same build with S400 and Aorus B550i PRO AX, but i have issue with my nvme gen3 at the back of the motherboard, too close with the vram of my 3090 FE. Maybe high temps ? Any tips ?
@manongunboxing
3 ай бұрын
If you are not yet sure if it is a heat concern, I suggest to make sure that it is the concern. Say, check the temps while playing, when idle, and when there is disk load. But if you do have temp issues, maybe there are low profile heatsinks that can be attached to nvme drives (similar to corsair mp600 lpx nvme heatsinks) - i’m imagining it exists on amazon but sorry I just can’t confirm it now. It will not drastically cool it but at least there will be some heat dissipation.
There is a v2 of this case which fits 67mm coolers like the axp120.
@NectarGaming
7 ай бұрын
could you link it or put the product name?
@cecilchan1988
7 ай бұрын
@@NectarGaming s400 v2
@malealoy5622
7 ай бұрын
@@NectarGaming i think it's the one that has a type C connection in the front. Because i just ordered this one, and the description said it supports 67mm coolers. I noticed that when they have a type c then they're probably the newer version, but idk if this is true.
@NectarGaming
7 ай бұрын
@@malealoy5622 one way to test this is to have a type c version then use a 65mm cooler
@cecilchan1988
6 ай бұрын
@@malealoy5622any update my friend? Did you fit the x67
did it come with the black fans or you bought that on your own?
@manongunboxing
5 ай бұрын
I bough it separately
did you try S300? curious how much worse it is temp/ventilation-wise also, i think the brand name is "shiny snake" as they have lil snake on their taobao store logo xd
@manongunboxing
5 ай бұрын
Video coming soon for s300
@daesz
5 ай бұрын
great, i really like it more than s400 (cuz its smaller), but i feel like it will be very hot inside due absence of 2 fans on top@@manongunboxing
@bensteelemusic
4 ай бұрын
@@daesz I haven't held the S300, but I just got hold of both the white and black S400 and they're gorgeous. Beautiful size, and that extra cooling, GPU and fan capacity go such a long way to improve the temps and fan noise of the system. I wouldn't downsize to S300 for the sake of a couple cm size difference.
Does the case have a glass panel for add on?
@manongunboxing
5 ай бұрын
hi, I didn't see any glass panel add-on option.
Hey, how much space was left for the gpu after the installing the Strix 3070? I have a 4090 it’s a 8mm longer than the Strix. Thanks!
@manongunboxing
3 ай бұрын
Iirc it was a cm more. But for 4090, beware of height as it might the 12vhpwr might hit the fans
Will this case fit an SFX-L PSU?
@manongunboxing
2 ай бұрын
Yes, it will
The case you say comes with v4 PCIe riser. Can I use a v3 GPU with it? Say RTX 2070s. It is just a v3
@manongunboxing
Ай бұрын
Yes it should be fine. What’s not fine is if your riser is lower generation than your motherboard and gpu. E.g Motherboard and gpu is gen 4 while riser is gen 3, then expect windows crash or no POST Motherboard and/or gpu is gen 3, then riser can be gen 3 or higher. Technically, pcie generations are backwards compatible. But the riser should keep up as the riser generation is not part of the equation thus the minor complication that your riser should be equal or higher. Anyway, again, for your case, it should be fine
@Architect.Sancho
Ай бұрын
@@manongunboxing salamat!
may question lang ako hindi ba compatible ang IS-55 sa Gigabyte B550I Aorus Pro AX? parang compatible naman sila sa pcpartpicker di ba siya kasya ang configuration niya sa case nato?
@manongunboxing
7 ай бұрын
Compatible po in 1 direction. Naka-usli yung heatsink pataas. With that, di kakasya sa case na to since walang space sa baba (since irorotate yung mobo)
@third12_
7 ай бұрын
@@manongunboxing ahhh i see ganun pala thanks sa reply
Di ba talaga kasya 120mm slim fan sa baba? Parang malaki naman yung space. Pwede din siguro tanggalin yung front usb if di naman need.
@manongunboxing
5 ай бұрын
Kasya. It was part of the testing, may triple fan config.
Boss magandang araw. Pasensya sa abala. Ano pong ma irecommend nyo na case under 10L or under na magandang pang travel at pwede sa Ryzen 7 5700G na pwedeng lagyan ng GPU in the near future? Salamat
@levyvizcayno4358
6 ай бұрын
I mean under 15L at maganda ang airflow. Salamat
@manongunboxing
6 ай бұрын
This case itself po -- s400. Though so far, I find ITX builds as space savers rather than portable / good for travel. Siguro dapat below 5L... Before, there was densium (5L case) with relatively good GPU support pero nagsara na. Maybe velka 3 if price is not an issue.
boss san ka nakabili ng case?
@Snikkah
8 ай бұрын
00:23 bossing :D Lazada and Shopee same shop.
@manongunboxing
7 ай бұрын
I also added the links in the description
Does anyone feel like a slurpie?