In his defense, that unit is WAY too close to the house! Lol
@SurfBrosHVAC3 сағат бұрын
100%. That's why the camera came out. I told him I would get him what he needs to do it and we'll see how long it takes
@realSamAndrew3 сағат бұрын
I was shocked when i took some online training and they had whole chapters and units on what is a screwdriver, what is a nail, what do you do with a crescent wrench, etc. I mean, nobody ever had a bike as a kid? Nobody ever had to tighten a nut or bolt?
@SurfBrosHVAC3 сағат бұрын
I was mechanically dumb before getting into HVAC. Used a drill like 10 times for random things here and there. This online training would have been targeting me
@Hvacgordo4 сағат бұрын
It’s a right of passage we’ve all been the new guy
@SurfBrosHVAC4 сағат бұрын
Yessir
@MsMonster1285 сағат бұрын
Seems like a nice guy
@SurfBrosHVAC5 сағат бұрын
This is Colton guys. Newest member of the team
@THESNAKE8Күн бұрын
Not me building a pool heater out of a 18k window unit, with a brazed plate heat exchanger, and plumbing the evap into my return air plenum and running the central air fan on low, so I can heat the pool and cool/dehumidify the house with the same watt of electricity. Next up? Solar powering it 😈
@bobboscarato1313Күн бұрын
I'm guessing this is for a stationary bus so it can connect to power lines!
@bobboscarato1313Күн бұрын
Unless you also carry an alternator and additional fuel tank?
@SurfBrosHVACКүн бұрын
He has solar on top and batteries to power everything. He has his own plan for powering it and we are leaving that part of it up to him
@Guerrilla_OPКүн бұрын
You could have mounted it on an adjustable mount, so it can be moved out, in hotter temperatures. Then you can have it pushed in, when you don't need it out, and vice versa.
@SurfBrosHVACКүн бұрын
Yeah there are for sure better ways to mount it. If you have a link to something good we can send it to him. It’s pretty mobile cause we installed the flexible lines so he can change it if he wants
@rv10flyer84Күн бұрын
I installed a gree 9K 22seer hp on my Chevy 2500 express. Works great. Cabinet, od coil, fan underneath where spare tire used to be. Remove tire hoist and install with fan blowing down. Compressor bolted to floor using the rubber feet at left rear of van.
@CravinMorehead4202 күн бұрын
Sweet Skoolie. Haha, damn $20..
@SurfBrosHVACКүн бұрын
You were close
@jonhvac2 күн бұрын
What's the BTU of that unit?
@SurfBrosHVACКүн бұрын
12k I believe. We did not supply the unit. Only thing we got for him were the no kink connectors
@deancobasky2 күн бұрын
nice drive threw came to you i am jealous nice !!! bounceing around may be a problem there any who nice job dudes
@SurfBrosHVAC2 күн бұрын
The unit is bolted to the platform and we put the flexible lines so that hopefully at least the flares stay intact. We installed an 18k BTU Daikin last year and the guy drove it all the way to Key West and it was working last I checked
@carrieresammy2 күн бұрын
thats fucking awesome
@glenngriger89974 күн бұрын
says in the instructions not to mount it to the bottom of the disconnect.
@SurfBrosHVAC3 күн бұрын
Interesting. I’ve never actually installed one on the bottom this one was done by an electrician. Good to know though
@omarquezada51594 күн бұрын
It’s because you guys suck at installs and don’t take pride of your work ginger boy get yourself a Mexican
@SurfBrosHVACКүн бұрын
I am Mexican. Speak fluent Spanish. Tapatio
@user-pw1mc5gw2m5 күн бұрын
$20.01 xlarge please. Like watching you cats have some fun while getting dirty. Thanks again.
@SurfBrosHVAC2 күн бұрын
You won
@CookingWithEdina5 күн бұрын
F that job 😂
@omario64306 күн бұрын
I really love that you were able to keep the old components like the burners and blower from that really old furnace, just to show how reliable they were back then!
@syntaxerorr6 күн бұрын
$25.55
@lureofthenorth13977 күн бұрын
35.80 ?? We love your channel !!! #Massachusetts
@fernandoprieto28658 күн бұрын
Music rocks 😊
@coastalcarolinarocks8 күн бұрын
$32.62
@MelchorLuaSanchez8 күн бұрын
$46.84
@TT-ot1np8 күн бұрын
$49.88
@INUMINIUM8 күн бұрын
$27.23 have no clue of pricing!
@CravinMorehead4208 күн бұрын
$19.25
@Hvacgordo9 күн бұрын
17.38
@rogerdodger34779 күн бұрын
$23.75
@jz71099 күн бұрын
$14.13
@garza76769 күн бұрын
Would you ever remove an old unit again or just leave it next time ?
@SurfBrosHVAC9 күн бұрын
This one was obscured by a bunch of stuff. There was a an asbestos abatement that happened before we were on site that freed up a lot of space. They literally shoved this thing into the back of the attic way back when and so we couldn’t tell how big it was before the abatement. I have done this before and never had an issue. I guess I’ve got to be more careful moving forward cause this sucked.
@garza76769 күн бұрын
@@SurfBrosHVAC how much for one of your shirts ? Large ?
@SurfBrosHVAC9 күн бұрын
I don’t have enough to sell them unfortunately. Working on it
@garza76769 күн бұрын
$60 for scrap ?
@meridianline72919 күн бұрын
$1.73
@RobertTuck-vo8cw10 күн бұрын
Ir probably had asbestos in it.
@Menik55910 күн бұрын
Dude that's a fucking package unit in an attic! Sick 😂
@SurfBrosHVAC10 күн бұрын
Yeah dude. For reference imagine trying to move a package unit using only forearms. The previous guys shoved it into the corner so it was really hard to pull out
@dwight_klaus298110 күн бұрын
blatant plug for Turbo200. They don't last any longer. There is no magic pixy dust inside.
@SurfBrosHVAC10 күн бұрын
This was not sponsored if that's what you're implying
@deancobasky10 күн бұрын
alex and red are starting to wise up on wearing a mask smart !! great job love these install videos brings me back to the good old days way to bang it out !! you will pay the price on breathing that down the road nice precautions red! nice video WANT A SHIRT!! 12.29 ON SCRAP
@jonhvac10 күн бұрын
$15.75 for the scrap
@dmiestercommkitchentech304310 күн бұрын
$28.27
@tbucky232310 күн бұрын
$18.69 good video I did this once but only two of us there for changeout but was in a crawl space
@revivalist11610 күн бұрын
Dude congrats on new office space that’s awesome man.
@Crazywill21010 күн бұрын
$22
@duongnguyen-hr2ig10 күн бұрын
That was beast of a furnace lol
@duongnguyen-hr2ig10 күн бұрын
I say $17.84
@joelmitchikoff224310 күн бұрын
Cast iron and shred steel 11.26
@WhiteboyRick9610 күн бұрын
$18.47
@WhiteboyRick9610 күн бұрын
I wonder how much a Lennox pulse weighs
@richlikeg372210 күн бұрын
Life of an installer, I hate low attics he most. I’m flexible but the heat from the roof and not to mention roofing nails that can poke you, just drains the energy out of you. I’m thinking $34 dollars of scrapping that unit
@SurfBrosHVAC10 күн бұрын
This install is honestly one of the most brutal we’ve done. It’s still ongoing. The house is working against us. It’s so bad we haven’t manage to get much footage cause recording does slow down the job a little
@AaronPowellvox10 күн бұрын
I never weighed one of these. Crazy. My guess on scrap would be $15.
@SurfBrosHVAC10 күн бұрын
This one is from the mid forties. I did some research to confirm but also that’s when the house was built
@AaronPowellvox10 күн бұрын
@@SurfBrosHVAC wow!
@Straycurrent10 күн бұрын
$13.26.
@SurfBrosHVAC10 күн бұрын
If you are the only guess then you will win
@Straycurrent10 күн бұрын
@@SurfBrosHVAC Gotta give the other viewers time to submit. Who knows, in this heat some of them may be still finishing up the day.
@SurfBrosHVAC10 күн бұрын
This thing was held together with little flathead screws and nuts/bolts of literally random sizes. Such a pain to take apart
Пікірлер
In his defense, that unit is WAY too close to the house! Lol
100%. That's why the camera came out. I told him I would get him what he needs to do it and we'll see how long it takes
I was shocked when i took some online training and they had whole chapters and units on what is a screwdriver, what is a nail, what do you do with a crescent wrench, etc. I mean, nobody ever had a bike as a kid? Nobody ever had to tighten a nut or bolt?
I was mechanically dumb before getting into HVAC. Used a drill like 10 times for random things here and there. This online training would have been targeting me
It’s a right of passage we’ve all been the new guy
Yessir
Seems like a nice guy
This is Colton guys. Newest member of the team
Not me building a pool heater out of a 18k window unit, with a brazed plate heat exchanger, and plumbing the evap into my return air plenum and running the central air fan on low, so I can heat the pool and cool/dehumidify the house with the same watt of electricity. Next up? Solar powering it 😈
I'm guessing this is for a stationary bus so it can connect to power lines!
Unless you also carry an alternator and additional fuel tank?
He has solar on top and batteries to power everything. He has his own plan for powering it and we are leaving that part of it up to him
You could have mounted it on an adjustable mount, so it can be moved out, in hotter temperatures. Then you can have it pushed in, when you don't need it out, and vice versa.
Yeah there are for sure better ways to mount it. If you have a link to something good we can send it to him. It’s pretty mobile cause we installed the flexible lines so he can change it if he wants
I installed a gree 9K 22seer hp on my Chevy 2500 express. Works great. Cabinet, od coil, fan underneath where spare tire used to be. Remove tire hoist and install with fan blowing down. Compressor bolted to floor using the rubber feet at left rear of van.
Sweet Skoolie. Haha, damn $20..
You were close
What's the BTU of that unit?
12k I believe. We did not supply the unit. Only thing we got for him were the no kink connectors
nice drive threw came to you i am jealous nice !!! bounceing around may be a problem there any who nice job dudes
The unit is bolted to the platform and we put the flexible lines so that hopefully at least the flares stay intact. We installed an 18k BTU Daikin last year and the guy drove it all the way to Key West and it was working last I checked
thats fucking awesome
says in the instructions not to mount it to the bottom of the disconnect.
Interesting. I’ve never actually installed one on the bottom this one was done by an electrician. Good to know though
It’s because you guys suck at installs and don’t take pride of your work ginger boy get yourself a Mexican
I am Mexican. Speak fluent Spanish. Tapatio
$20.01 xlarge please. Like watching you cats have some fun while getting dirty. Thanks again.
You won
F that job 😂
I really love that you were able to keep the old components like the burners and blower from that really old furnace, just to show how reliable they were back then!
$25.55
35.80 ?? We love your channel !!! #Massachusetts
Music rocks 😊
$32.62
$46.84
$49.88
$27.23 have no clue of pricing!
$19.25
17.38
$23.75
$14.13
Would you ever remove an old unit again or just leave it next time ?
This one was obscured by a bunch of stuff. There was a an asbestos abatement that happened before we were on site that freed up a lot of space. They literally shoved this thing into the back of the attic way back when and so we couldn’t tell how big it was before the abatement. I have done this before and never had an issue. I guess I’ve got to be more careful moving forward cause this sucked.
@@SurfBrosHVAC how much for one of your shirts ? Large ?
I don’t have enough to sell them unfortunately. Working on it
$60 for scrap ?
$1.73
Ir probably had asbestos in it.
Dude that's a fucking package unit in an attic! Sick 😂
Yeah dude. For reference imagine trying to move a package unit using only forearms. The previous guys shoved it into the corner so it was really hard to pull out
blatant plug for Turbo200. They don't last any longer. There is no magic pixy dust inside.
This was not sponsored if that's what you're implying
alex and red are starting to wise up on wearing a mask smart !! great job love these install videos brings me back to the good old days way to bang it out !! you will pay the price on breathing that down the road nice precautions red! nice video WANT A SHIRT!! 12.29 ON SCRAP
$15.75 for the scrap
$28.27
$18.69 good video I did this once but only two of us there for changeout but was in a crawl space
Dude congrats on new office space that’s awesome man.
$22
That was beast of a furnace lol
I say $17.84
Cast iron and shred steel 11.26
$18.47
I wonder how much a Lennox pulse weighs
Life of an installer, I hate low attics he most. I’m flexible but the heat from the roof and not to mention roofing nails that can poke you, just drains the energy out of you. I’m thinking $34 dollars of scrapping that unit
This install is honestly one of the most brutal we’ve done. It’s still ongoing. The house is working against us. It’s so bad we haven’t manage to get much footage cause recording does slow down the job a little
I never weighed one of these. Crazy. My guess on scrap would be $15.
This one is from the mid forties. I did some research to confirm but also that’s when the house was built
@@SurfBrosHVAC wow!
$13.26.
If you are the only guess then you will win
@@SurfBrosHVAC Gotta give the other viewers time to submit. Who knows, in this heat some of them may be still finishing up the day.
This thing was held together with little flathead screws and nuts/bolts of literally random sizes. Such a pain to take apart