Пікірлер

• 
  @mattwernecke23423 күн бұрын

  How are you getting the proper micron size with a peristaltic pump?

• 
  @mattwernecke23423 күн бұрын

  Thanks!

• 
  @Dennis474034 күн бұрын

  More great info like always. Enjoy your videos.

• 
  @tips4tesla4077 күн бұрын

  I made a seperate 1-2 gallon chamber with an intake and outtake , that circulates water around the light constantly and it never turns off, off the the side of the main reservoir, what do you think?

• 
  @pandg5439 күн бұрын

  Probably the best and most understandable video instruction of any product, i have ever seen.

• 
  @dontbanmebrodontbanme540310 күн бұрын

  For those who were confused like I was, most sites will tell you that, for example, a good value for EC is 2. Nobody ever points out that the unit in this case is milliSiemens per centimeter. So I was a bit shocked when I put my meter in my kratky container that my tomatoes and eggplants are happily growing in and got a number of around 2200 to 2390. He mentions it in the video, but I'll once again point out that this unit gives its value in microSiemens per centimeter. Translation: divide the number you get by 1,000 to get the number you'll typically see. So in my case, my water was around 2.2 - 2.4, which is right on the border for both tomatoes (almost too high) and eggplants (a tad too low). Translation: if you're doing hydroponics like I am, it's probably best to group things you want to grow by their ph and not mix them all together. I'm glad to finally at least have numbers around what I've been doing.

• 
  @aaronacj12 күн бұрын

  Your content would get more views if you stopped repeating the same shit and made your videos 15-20 mins.

• 
  @aaronacj13 күн бұрын

  Skip like the first 7 mins… he repeats himself like 50’times.

• 
  @EsromFF16 күн бұрын

  Love the outdoor growing !

• 
  @Dennis4740317 күн бұрын

  It's definitely an interesting approach to using the aerosolizing sprayer head. They are more powerful than the 1/4" plastic ones that are often shown on sites. The cool thing about leveraging air is that all the liquid tubing is at 1-3 psi, and the air-lines are at pressure. Air sure makes a lot less of a mess when it leaks. The other thing from a scale perspective, is you can avoid having multiple pumps if you have multiple nutrient mixtures you are feeding, since the air controls the flow.

• 
  @mmogiesm773518 күн бұрын

  Is the meter need to be calibrated before using pH meter?

• 
  @driftubery982924 күн бұрын

  Your link:FishTankLight-7W uv light ,but u say your light is 15W

• 
  @ATX85Ай бұрын

  I see they now have a VBR300. I wonder what the difference is between the 100 and 300? 🤔

• 
  @SaintJude66Ай бұрын

  I did things u mentioned n then listened to you, you are a fkin genius!!!🙇🏽‍♂️

• 
  @williamodelaАй бұрын

  Thanks

• 
  @williamodelaАй бұрын

  Clear explanation. Thank you 🙏.

• 
  @scottmiller1916Ай бұрын

  Thanks for the tutorial brother, love your site. I’m sure your aware of the importance of AIR FLOW( circulation) when growing crops in containers. I’ve found computer tower cooling fans work wonderfully for DIY systems, also, bulk aquarium air stones and air tubing 👍🏻

• 
  @peakenterprisesllc9286Ай бұрын

  Great video straight to the point.. 👍🏾

• 
  @PatrickWilson-hy5yfАй бұрын

  Its already been proven from migro a expert at led lights his mate bruce is the one who created the apogee par meter its already been proven how accurate the apps can be

• 
  @xfirehurican2 ай бұрын

  5 stars! Perfect for mine. Thanks

• 
  @ArchdemonSoasin2 ай бұрын

  Would this device be good for telling pH of hot sauce?

• 
  @scottmiller19162 ай бұрын

  Do you have an AMAZON store front?

• 
  @scottmiller19162 ай бұрын

  Then again,the BEST MEDICINE I’ve ever grown had NANNERS🧐

• 
  @PatrickWilson-hy5yfАй бұрын

  I'll add to that the worst smoke I've ever smoked had Nana's

• 
  @scottmiller19162 ай бұрын

  Then again,the BEST MEDICINE I’ve ever grown had NANNERS🧐

• 
  @scottmiller19162 ай бұрын

  It’s worth not getting NANNERS during flower, thanks brother!

• 
  @scottmiller19162 ай бұрын

  👀👁️👁️😎

• 
  @scottmiller19162 ай бұрын

  You can burn your leaves AND RETNAS!

• 
  @scottmiller19162 ай бұрын

  Now 👁️know why other HOSTS wear sunglasses🤣

• 
  @scottmiller19162 ай бұрын

  CHILDREN OF THE SUN 🎵🌞🎼sorry, I’m done.

• 
  @scottmiller19162 ай бұрын

  I GREW UP with PEBBLES of the Flintstones singing” 🎵Let the Sunshine in🎵 “ ✅it out or “ Len, don’t steal my sunshine, or GOOD DAY SUNSHINE………..🌞

• 
  @scottmiller19162 ай бұрын

  PAR 4 my coarse

• 
  @scottmiller19162 ай бұрын

  I’m diffused

• 
  @scottmiller19162 ай бұрын

  🤬my phone and a piece of copy paper won’t do it?

• 
  @scottmiller19162 ай бұрын

  EMP SOLAR STORM?

• 
  @scottmiller19162 ай бұрын

  Light it up🎵light it up🎵just found U✌️😎brother.

• 
  @pacman17922 ай бұрын

  Don't need to have a pump on the nutrient side if you just use an air compressor set at 90 psi (or so) as it will act as a syphon & pull the solution through instead of having it pushed... Thats only if you can stand the sound of an air compressor running where ever the set is 😂🤷🏼‍♂️

• 
  @atomizer26652 ай бұрын

  If you get a 30db compressor you wont hear it. The one in the video is probably around 60db, aka, 10x louder than 30db. There`s no need to run 90psi, my siphon fed nozzles run 30psi, my pressure fed nozzles run a max of 43psi air and 30psi water.

• 
  @pacman17922 ай бұрын

  You are making this way more difficult than it needs to be 😂

• 
  @chrismurphy71052 ай бұрын

  great video, I was you wondering if the meter needs to be calibrated for Ph when purchased, like before you use it or is it calabrated out of the box so calibration is only necessary after +-25 uses as stated in video? thank you.

• 
  @BlueMoon-gh4pp3 ай бұрын

  What about cannabis cultivation in a 2x4 grow tent

• 
  @gnawbabygnaw4 ай бұрын

  Thank You! So many choices of ph meters. This is my first one. I chose it because it said Family Owned. Now this clear video. I’m so glad I chose this.

• 
  @jy22994 ай бұрын

  Thanks for your presentation. I just purchased the FH-100 (I think it's the exact same device) and appreciate your run-through. The cost of an apogee seemed a little overkill for indoor tomatoes and strawberries, lol

• 
  @youtubecopyrights4 ай бұрын

  Light interference? I don’t think that’s a real thing. For my current understanding one light does not “ push “ other light away. Maybe in perception to our eyes but the energy transmitted onto the surfaces will be the same. Otherwise we could make those light sabers.

• 
  @aero-gro4 ай бұрын

  That's fair. lol. I'm not sure how to articulate what I was thinking there.

• 
  @antoniosanford46754 ай бұрын

  Great show. Sorry I missed you.

• 
  @aero-gro4 ай бұрын

  Next time!

• 
  @atomizer26654 ай бұрын

  Vegetable glycerin is a bad idea as its highly hygroscopic. It draws water from the air and, unlike most oils, it does mix with water. The output of the compressor may be enough to run a small system, the question is whether it can make it to harvest before the motor burns out or the reed valves develop issues. TIP: attach a tube from the suction port to the oil container and turn the compressor on . The oil will be pulled into the compressor.

• 
  @aero-gro4 ай бұрын

  How do you feel about mineral oil?

• 
  @atomizer26653 ай бұрын

  @@aero-gro A hydraulic mineral oil is the best choice. You can buy FDA approved hydraulic mineral oil, certified for food contact, but its around $1275 for a 48lb drum. I`m working on an alternative method of generating cool, clean compressed air that is a lot cheaper than buying a new fridge compressor. If you invert the compressor you risk filling the cylinder with oil which is not compressible. This is the reason you should let a fridge or freezer sit for a while after moving it to allow the oil to settle. The oil is drawn up the central hollow tube and sprays out everywhere when the compressor is running so there`s no need to invert it.

• 
  @Aussie-des4204 ай бұрын

  My weller soldering station must be all of 45 years old thank you Mr weller 😂💯

• 
  @Aussie-des4204 ай бұрын

  Nice job Andrew I played about with air Venturi systems back in the 90s when I was learning from books no internet back then . There is not a lot on KZread people seem to have a go at the method for content but no end result videos I can find . I have ordered parts so you will be seeing a bit of me m8

• 
  @Aussie-des4204 ай бұрын

  👍

• 
  @Aussie-des4204 ай бұрын

  Good show ANDREW