Seriously, the final product looks like crap. Orange peel and uneven finish. I've used this product several times and utterly hate it.
@810PRODUCTIONS2 жыл бұрын
Dog(s) in the background are obnoxious. The dog owner is a piece of spit.
@higamerXD2 жыл бұрын
that is such a usefull tool, sadly cant find any for sale in the eu
@bountyhunter18902 жыл бұрын
Can you provide the video of sanding this old paint?? Thanks
@bountyhunter18902 жыл бұрын
No sanding video ?????????????????????
@jaymefunny74242 жыл бұрын
Hoping thats not lead paint 😖
@debbiedesertangel2 жыл бұрын
I keep getting streaked marks on my kitchen cabinets with this paint, Benjamin Moore paint called advance satin.. Original finish was sprayed with lacquer. Paint stores are all of lacquer and satin so we went with semi gloss Benjamin moore . We sanded and cleaned the cabinet then applied Kiltz primer in latex. Now after applying the advance paint it looks very streaked! Am I using the wrong primer?
@tomprzytula2 жыл бұрын
Great video. Thanks for all the helpful info you've been giving us. I have 80s oak cabinets and want to paint them with a brush & roller. After watching your videos I decided on BM Advance. The idea was, Coverstain oil bonding primer, then BM Fresh Start water based primer, then 2 coats of Advance. Went to BM store and they said that since I'm using the coverstain primer, I won't need the water based Fresh Start on top of that. What's your opinion on skipping Fresh Start? I don't want unnecessary work but at the same time I don't want to screw it up. Thanks Tom
@debbiel12283 жыл бұрын
Wow! Who knew there's so much paint inside even when it looks clean. Thank you for your demonstration.
@hildaflores82523 жыл бұрын
This is so satisfying
@nestormejia26923 жыл бұрын
Aura dry too fast
@brucemacneil3 жыл бұрын
Best way is to spray after weeks of prep - then, sane and spray some more. repeat.
@BornAgainCynic00863 жыл бұрын
Mate, buy a heat gun.
@junebug53204 жыл бұрын
Upload more my geeeee
@tlwiez43074 жыл бұрын
Will this paint scratch easily if used on wood trim
@jackwardley36263 жыл бұрын
these hybrid paints ant as tough as oil if your having coloured woodwork these no point using hybrid paints oil gloss is best for interior woodwork.
@hlez88884 жыл бұрын
Does this paint contains lead?
@shure464 жыл бұрын
Horrible orange peel ..... terrible paint job
@larrywoodruff75304 жыл бұрын
Not an easy job, this is why they charge what they do, worth every penny and no, I'm not a painter.
@fonz-su6xb Жыл бұрын
I did it for 5 minutes and my arm was worked.
@1joancalvet4 жыл бұрын
Hola justin saludos desde barcelona ¿Que tipo de pincel usas para estos esmaltes he visto que es sintetico de color rojo que marca es estos pinceles .saludos
@davenelson29014 жыл бұрын
nice videio ,but shut your dog up man
@flagstamp5 жыл бұрын
I'm getting crazy brush marks with this stuff on trim molding. This isnt the result I was told I would get with Advanced. Not satisfied at all!
@shure464 жыл бұрын
ya this video shows a lot of brush and roller marks ..... I sure as hell won't use this crap ..... I use SW waterborne proclassic on cabs and it brushed well ..... dries kind of fast so you have to move fast , but it came out nice , and really , fast drying has some benefits !!!!
@darienredsox18784 жыл бұрын
Used it in my house and it took some practice and a good brush to not leave brush marks.
@bethcullinane8155 жыл бұрын
This paint is NOT oil based!!!
@americarocks1776 Жыл бұрын
Right. It's a waterborne paint. It clearly says so.
@Getajob-ye3jr5 жыл бұрын
This product is not the greatest for new construction it works better when going over areas previously painted with Satin Impervo oil base .
@beefsoda15 жыл бұрын
Fuck that. Get a pressure washer.
@mattgloss85805 жыл бұрын
Oh. good God. How on earth professional painter can show such poor standards of the finish?
@juantaste86035 жыл бұрын
Omg amateur painter
@chynnadoll19996 жыл бұрын
Oh Lawd. This is a JOB. Just shoot me!😑🙄😳😔
@harrisb436 жыл бұрын
So, considering this is apparently a Benjamin Moore video production, are we to believe that the surfaces shown at 4:24 and 4:33 represents the best of what we can expect from this product? I wish I'd seen this before I bought the stuff. I suspect this was supposed to be a spray-only product marketed to the trade. (Seems to be very few bad reviews from sprayers.) but was so expensive sales were poor(?). Decision was then made to sell to broad-base retail market for increased volume(?). Who knows. Impossible to get VERY good results with even a good brush or roller. For the price, it should jump out of the can.
@jwayne7776 жыл бұрын
Just found out the hardway. Your going to do it again unless you hit it with Jasco paint and epoxy stripper. Get as much old paint off. The paint is decaying and shrinking. You put new paint on old shrinking paint and you will get the same.
@mailaloomy42196 жыл бұрын
My works too. Used stodoys handbooks and build it with no problems.
@hectormontalvo89786 жыл бұрын
watch out for lead paint your health and lungs doesn't work a couples hundred bucks, many home owners ignore that.
@andrewe.79076 жыл бұрын
I have cracked paint around the bottom of my exterior door. Can I just use sandpaper to smooth it out and paint? I'm not looking for a huge job here. Thx....
@angieoxford70922 жыл бұрын
If you’re still waiting, the answer is yes
@olegkazakov62026 жыл бұрын
Remowe paint from wood. Cup brush Megaloder video. Ebay 35 $
@RLB-wb4ms6 жыл бұрын
I just finished using this paint on my cabinets.....very thin paint, but leaves a beautiful finish!! I brushed it on and smoothed with a roller....beautiful. I am waiting on the cabinets to fully cure....I am nervous about chipping...we'll see.
@DarkHorse086 жыл бұрын
Rachel Burnette How did your cabinets turn out? I just finished painting the entire island in my kitchen with this paint in BM Chelsea Gray and will paint the wall cabinets BM Super White.
@DarkHorse086 жыл бұрын
Rachel Burnette How long did it take to harden and do you have any nicks in the paint after use?
@cje021277 жыл бұрын
Nice video, Justin. I have searched all over for application help and found your video most helpful. A couple questions, though: 1) You say "don't go too close to the edge," but then I see you cutting in at the edge (right after the first, away-from-the-edge strokes). Am I understanding correctly that you cut in in two steps? First: away from the edge; Second, at the edge, blending into the first? 2) Do I lay off the brushed-on coat or just the areas where there are issues? I find that when I lay off the entire area (which I thought you were suggesting), I end up over-working the paint. Brush marks and globs everywhere. I'm thinking that the goal here is to just get the product on the surface and let it do it's leveling thing, only addressing, minimally, the obvious issues, like drips, etc.? I'd really appreciate a reply!
@007Variable6 жыл бұрын
Catherine Osborne of course you must cut the edge line with paint or it will not be painted. He said, " dont bring to much paint into the edge" or you'll have a thick line of paint on the cut line which will be difficult to remove or spread since your paint is in the corner against a different color.
@Existentiallytorn6 жыл бұрын
The trick with Advance is to do lighter coats, you don't want to over apply this product because it is so thin it will run when over applied, which seems to be what a lot of people are having issues with, professionals or otherwise. Per Benjamin Moore as well as any other paint manufacture in the world will suggest two coats. This is not for the sake of trying to get more money out of you, this is so the sheen and color are uniform. Think of it this way, if you have a wall or door or otherwise that you are able to look across at a shallow angle and you apply one coat a few things will more than likely be visible. You will see inconsistency in the sheen (glossy spots and dull spots) as well as different tones of the color this is due to the paint being more heavily applied in one spot compared to another. The second coat really establishes the uniformity of both the color and sheen. Hope this explanation helps.
@6ftNaturalBeauty7 жыл бұрын
Holy shit that skund
@jdhitc7 жыл бұрын
invest in a heat gun, so much easier
3 жыл бұрын
More easier is with hand and your finger duh.
@TheNlograsso7 жыл бұрын
He's painting a old, crappy garage door, not crown. Looks fine.
@Teller34487 жыл бұрын
Advance yellows very quickly...never use pure white.
@rupalsojitra3827 жыл бұрын
Is there a white in the Advance series (or other brand) you recommend? I'm sampling wedding veil and chantilly lace right now. Suggestions would be greatly appreciated.
@Teller34487 жыл бұрын
I recommend acrylic CIL. Only paints tinted with titanium oxide (and nothing else) are called technically called WHITE.
@Existentiallytorn6 жыл бұрын
Advance has a stock white in all of the sheens, however this stock white tends to be closer to Benjamin Moores' "Brilliant White, PM-4/OC-150) Chantilly Lace is by far the brightest white that Benjamin Moore offers. All the tints used by Benjamin Moore to make those colors are Titanium Dioxide based and personally I have never had a report of Advance yellowing in the 5 years I have been at my work.
@shure464 жыл бұрын
@@rupalsojitra382 SW Proclassic or PPG breakthrough has worked well for me .....
@romaineathey36637 жыл бұрын
Nice movie. However you can make it yourself. Just google woodprix and learn how to do it easily.
@JacanaProductions7 жыл бұрын
Same question, how much paint does one actually need to remove? My window sills look identical to your windows :-) OK to leave some paint around removed paint that is still stuck to the wood?
@hectorlambaren5702 жыл бұрын
Just what is peeling
@vinnydoles91808 жыл бұрын
As read in some other comments, I also recommend taking a look at Woody Hyezmar’s Woodworking Bible. Last time I saw he was still looking for proof readers!
@skiprope5368 жыл бұрын
Unbelievable paint. Finish is bar none. Dark colors I have had no problem with. How Ever the Semi gloss exterior man that stuff drys fast. Gotta work real fast.
@genesis122228 жыл бұрын
aura faded on my house in 5 years.... then the paint store gave me a rash of shit about the lifetime warranty ...
@skiprope5368 жыл бұрын
User Error or bad prep. I have dark Aura on clients after 6 years looks like it was painted yesterday.
@labenellis90498 жыл бұрын
seeing a lot of texture in the finish, can this product be sprayed?
@Existentiallytorn6 жыл бұрын
This product can be sprayed, it is recommended to use 1,500 - 2,500 psi using a tip with an orifice of 0.011 - 0.015.
@gabrielbizzlebop47028 жыл бұрын
is it lead paint?
@archean4328 жыл бұрын
Better not be, he was basically petting it.
@Beanz5728 жыл бұрын
Does it work on brick or just wood?
@duartepaintinghandymanservices9 жыл бұрын
Has a nice finish ones dried but a pain in the butt when spraying, you really cant cover with one coat, takes like 3 to 4 coats to actually cover, if you try to cover with one coat you are going to have a nice mess to clean afterwards, regal select is a much better product and actually cheaper
@theBike458 жыл бұрын
+Jorge duarte The paint is wonderful to work with - you just can't slap it on as you have done in the past. The results are essentially the same as regular oil paint, which remains the very best for semi-gloss trim and doors. Get with the times and stop living in the past Jorge
@duartepaintinghandymanservices8 жыл бұрын
+Col Mosby i use advance daily, so i know what I'm talking about, it's not worth the money, for a paint to cost over $40 you would think it would cover better and easier to work with but all the above are apposite with advanced, I use it cause they request it, that's the only reason.
@duartepaintinghandymanservices8 жыл бұрын
+Col Mosby by the way oil paints cover well and easy to work with
@CincinnatusPublish9 жыл бұрын
Worst paint I have used in over 25 years. It's like painting with glue, Runs drips and sags like I haven't seen with a paint since 1986. You have to police your work when you're done and I've done this work professionally. It also ruins the hilt of the brush. Coverage is just average and the finish is nothing to write home about. NOT WORTH THE PRICE OF A NAPKIN. Benjamin Moore should be ashamed of themselves.
Пікірлер
How irritating that continual barking is.
Seriously, the final product looks like crap. Orange peel and uneven finish. I've used this product several times and utterly hate it.
Dog(s) in the background are obnoxious. The dog owner is a piece of spit.
that is such a usefull tool, sadly cant find any for sale in the eu
Can you provide the video of sanding this old paint?? Thanks
No sanding video ?????????????????????
Hoping thats not lead paint 😖
I keep getting streaked marks on my kitchen cabinets with this paint, Benjamin Moore paint called advance satin.. Original finish was sprayed with lacquer. Paint stores are all of lacquer and satin so we went with semi gloss Benjamin moore . We sanded and cleaned the cabinet then applied Kiltz primer in latex. Now after applying the advance paint it looks very streaked! Am I using the wrong primer?
Great video. Thanks for all the helpful info you've been giving us. I have 80s oak cabinets and want to paint them with a brush & roller. After watching your videos I decided on BM Advance. The idea was, Coverstain oil bonding primer, then BM Fresh Start water based primer, then 2 coats of Advance. Went to BM store and they said that since I'm using the coverstain primer, I won't need the water based Fresh Start on top of that. What's your opinion on skipping Fresh Start? I don't want unnecessary work but at the same time I don't want to screw it up. Thanks Tom
Wow! Who knew there's so much paint inside even when it looks clean. Thank you for your demonstration.
This is so satisfying
Aura dry too fast
Best way is to spray after weeks of prep - then, sane and spray some more. repeat.
Mate, buy a heat gun.
Upload more my geeeee
Will this paint scratch easily if used on wood trim
these hybrid paints ant as tough as oil if your having coloured woodwork these no point using hybrid paints oil gloss is best for interior woodwork.
Does this paint contains lead?
Horrible orange peel ..... terrible paint job
Not an easy job, this is why they charge what they do, worth every penny and no, I'm not a painter.
I did it for 5 minutes and my arm was worked.
Hola justin saludos desde barcelona ¿Que tipo de pincel usas para estos esmaltes he visto que es sintetico de color rojo que marca es estos pinceles .saludos
nice videio ,but shut your dog up man
I'm getting crazy brush marks with this stuff on trim molding. This isnt the result I was told I would get with Advanced. Not satisfied at all!
ya this video shows a lot of brush and roller marks ..... I sure as hell won't use this crap ..... I use SW waterborne proclassic on cabs and it brushed well ..... dries kind of fast so you have to move fast , but it came out nice , and really , fast drying has some benefits !!!!
Used it in my house and it took some practice and a good brush to not leave brush marks.
This paint is NOT oil based!!!
Right. It's a waterborne paint. It clearly says so.
This product is not the greatest for new construction it works better when going over areas previously painted with Satin Impervo oil base .
Fuck that. Get a pressure washer.
Oh. good God. How on earth professional painter can show such poor standards of the finish?
Omg amateur painter
Oh Lawd. This is a JOB. Just shoot me!😑🙄😳😔
So, considering this is apparently a Benjamin Moore video production, are we to believe that the surfaces shown at 4:24 and 4:33 represents the best of what we can expect from this product? I wish I'd seen this before I bought the stuff. I suspect this was supposed to be a spray-only product marketed to the trade. (Seems to be very few bad reviews from sprayers.) but was so expensive sales were poor(?). Decision was then made to sell to broad-base retail market for increased volume(?). Who knows. Impossible to get VERY good results with even a good brush or roller. For the price, it should jump out of the can.
Just found out the hardway. Your going to do it again unless you hit it with Jasco paint and epoxy stripper. Get as much old paint off. The paint is decaying and shrinking. You put new paint on old shrinking paint and you will get the same.
My works too. Used stodoys handbooks and build it with no problems.
watch out for lead paint your health and lungs doesn't work a couples hundred bucks, many home owners ignore that.
I have cracked paint around the bottom of my exterior door. Can I just use sandpaper to smooth it out and paint? I'm not looking for a huge job here. Thx....
If you’re still waiting, the answer is yes
Remowe paint from wood. Cup brush Megaloder video. Ebay 35 $
I just finished using this paint on my cabinets.....very thin paint, but leaves a beautiful finish!! I brushed it on and smoothed with a roller....beautiful. I am waiting on the cabinets to fully cure....I am nervous about chipping...we'll see.
Rachel Burnette How did your cabinets turn out? I just finished painting the entire island in my kitchen with this paint in BM Chelsea Gray and will paint the wall cabinets BM Super White.
Rachel Burnette How long did it take to harden and do you have any nicks in the paint after use?
Nice video, Justin. I have searched all over for application help and found your video most helpful. A couple questions, though: 1) You say "don't go too close to the edge," but then I see you cutting in at the edge (right after the first, away-from-the-edge strokes). Am I understanding correctly that you cut in in two steps? First: away from the edge; Second, at the edge, blending into the first? 2) Do I lay off the brushed-on coat or just the areas where there are issues? I find that when I lay off the entire area (which I thought you were suggesting), I end up over-working the paint. Brush marks and globs everywhere. I'm thinking that the goal here is to just get the product on the surface and let it do it's leveling thing, only addressing, minimally, the obvious issues, like drips, etc.? I'd really appreciate a reply!
Catherine Osborne of course you must cut the edge line with paint or it will not be painted. He said, " dont bring to much paint into the edge" or you'll have a thick line of paint on the cut line which will be difficult to remove or spread since your paint is in the corner against a different color.
The trick with Advance is to do lighter coats, you don't want to over apply this product because it is so thin it will run when over applied, which seems to be what a lot of people are having issues with, professionals or otherwise. Per Benjamin Moore as well as any other paint manufacture in the world will suggest two coats. This is not for the sake of trying to get more money out of you, this is so the sheen and color are uniform. Think of it this way, if you have a wall or door or otherwise that you are able to look across at a shallow angle and you apply one coat a few things will more than likely be visible. You will see inconsistency in the sheen (glossy spots and dull spots) as well as different tones of the color this is due to the paint being more heavily applied in one spot compared to another. The second coat really establishes the uniformity of both the color and sheen. Hope this explanation helps.
Holy shit that skund
invest in a heat gun, so much easier
More easier is with hand and your finger duh.
He's painting a old, crappy garage door, not crown. Looks fine.
Advance yellows very quickly...never use pure white.
Is there a white in the Advance series (or other brand) you recommend? I'm sampling wedding veil and chantilly lace right now. Suggestions would be greatly appreciated.
I recommend acrylic CIL. Only paints tinted with titanium oxide (and nothing else) are called technically called WHITE.
Advance has a stock white in all of the sheens, however this stock white tends to be closer to Benjamin Moores' "Brilliant White, PM-4/OC-150) Chantilly Lace is by far the brightest white that Benjamin Moore offers. All the tints used by Benjamin Moore to make those colors are Titanium Dioxide based and personally I have never had a report of Advance yellowing in the 5 years I have been at my work.
@@rupalsojitra382 SW Proclassic or PPG breakthrough has worked well for me .....
Nice movie. However you can make it yourself. Just google woodprix and learn how to do it easily.
Same question, how much paint does one actually need to remove? My window sills look identical to your windows :-) OK to leave some paint around removed paint that is still stuck to the wood?
Just what is peeling
As read in some other comments, I also recommend taking a look at Woody Hyezmar’s Woodworking Bible. Last time I saw he was still looking for proof readers!
Unbelievable paint. Finish is bar none. Dark colors I have had no problem with. How Ever the Semi gloss exterior man that stuff drys fast. Gotta work real fast.
aura faded on my house in 5 years.... then the paint store gave me a rash of shit about the lifetime warranty ...
User Error or bad prep. I have dark Aura on clients after 6 years looks like it was painted yesterday.
seeing a lot of texture in the finish, can this product be sprayed?
This product can be sprayed, it is recommended to use 1,500 - 2,500 psi using a tip with an orifice of 0.011 - 0.015.
is it lead paint?
Better not be, he was basically petting it.
Does it work on brick or just wood?
Has a nice finish ones dried but a pain in the butt when spraying, you really cant cover with one coat, takes like 3 to 4 coats to actually cover, if you try to cover with one coat you are going to have a nice mess to clean afterwards, regal select is a much better product and actually cheaper
+Jorge duarte The paint is wonderful to work with - you just can't slap it on as you have done in the past. The results are essentially the same as regular oil paint, which remains the very best for semi-gloss trim and doors. Get with the times and stop living in the past Jorge
+Col Mosby i use advance daily, so i know what I'm talking about, it's not worth the money, for a paint to cost over $40 you would think it would cover better and easier to work with but all the above are apposite with advanced, I use it cause they request it, that's the only reason.
+Col Mosby by the way oil paints cover well and easy to work with
Worst paint I have used in over 25 years. It's like painting with glue, Runs drips and sags like I haven't seen with a paint since 1986. You have to police your work when you're done and I've done this work professionally. It also ruins the hilt of the brush. Coverage is just average and the finish is nothing to write home about. NOT WORTH THE PRICE OF A NAPKIN. Benjamin Moore should be ashamed of themselves.