hi there , at 15:02 , you put a new 16 digits key password different than the password you pulled it out from the key at minute 10:39 , can you tell me how you got this number ? and where you got it from ? thank you
@dalwirsinghjaswant37703 күн бұрын
Hi sir, does this product is still usable with Topix cloud online programming or we need the original DoIP device for programming ?
@AutelConsultancy3 күн бұрын
It still works. I used it yesterday for a client who recently purchased it
@DaveBrown20203 күн бұрын
Thank you for these videos , extremely well explained
@wilbertblanco26784 күн бұрын
How about if you don’t have the QR code?
@djiceaggeloui59844 күн бұрын
Hello dear friend . I have the Autel maxiim km100 . I make all key lost for my car Honda civic 2006 hatchback , but the green key flashing and say Replace MPCS/MICU/IMOES' function. They have other option in the menu of KM100 to select
@TheRallyCoop6 күн бұрын
Thanks Curtis. I purchased the Ultra when it first came out. I did nor renew the subscription. Will I loose the intelligent feature if I update?
@ponency17 күн бұрын
he's a Genius , period A real Genius Bravo Sir
@shuaibr23898 күн бұрын
What software is this? Is it vcds?
@nicolasjuarez86399 күн бұрын
You are my favorite thanks for your help
@nicolasjuarez863910 күн бұрын
Any one knows if you can add a key on 2019 Jetta with 508and xp400.?? please
@mrteausaable10 күн бұрын
Can l just clone the fob with ikey without connect to the car so l can get duplicate key? Or l need to let the car know l have extra key fob. I plan to buy km100x.
@nicolasjuarez863911 күн бұрын
If I have the autel 508 and xp400 can I do the same thing???
@nicolasjuarez863911 күн бұрын
Please just tell me when you have to extract the pin number I didn't see it in the video please..
@rwscarlett295812 күн бұрын
Question! Can IP616 do this kind of programming with the XP400?
@OverlandAddiction-qj1cn15 күн бұрын
i have a question? im not a shop and want to buy an autel ms 906 pro, and i only want it to be able to maintain my 2021 jeep, if i buy it and dont renew subscription will it loose any functions as far as working on the same 2021 jeep i bought it to work on?
@uKeyMe15 күн бұрын
Thanks!
@josuedavidnataren425515 күн бұрын
Thanks for sharing
@josuedavidnataren425515 күн бұрын
Can this be done with volvo modules? Tia
@josuedavidnataren425515 күн бұрын
Can this be done with an ultra ev
@AutelConsultancy15 күн бұрын
No but the Ultra kits I sell comes with a tool that does .
@princeoffame10016 күн бұрын
I have an issue with fem not communicating with the dme car was running fine 2 weeks later a bunuch of codes.and the fuel pump keeps running on check position no crank nothing
@kevincottman-dq7xg19 күн бұрын
Good morning I would like to get in touch with you. My phone with all my contacts was destroyed.
@AutelConsultancy18 күн бұрын
Ill send you an email
@kozak126520 күн бұрын
Hello, Im trying to program extra key for my 2020 nissan sentra with my Autel KM100E, (will be using autel nissan universal key) but it keep failing at "Step 2: Get a Pin". when i check autels "guide" it tells me that i need some additional cable that plugs in into BCM in the dash board. I have a suspicion that special cable is for another atutel key programmer and not KM100E. When i go to youtube i found multiple videos where people were able to progam nissan key just with Autel KM100E. I also noticed that setting little different, and version of nissan soft ware is different, mine is "Nissan V1.71", where all the people on the to KZread use version "Nissan V1.60". What do you think the problem is? Autel tech support is useless! :(
@leontaffe27421 күн бұрын
Can I get your number so I can call you Monday
@jerrygreen776421 күн бұрын
I got the code with no symptoms been. Bought the car not long ago but have put a few thousand miles still with no symptoms.
@ArthurFleck-tx9di22 күн бұрын
((((Want real advise?))) Do what I'm about to do with my 908sPRO PAPERWEIGHT! !!! Sell it. Get the XTool. I've been with Autel for years. Live in a tourist town. An get subbed by all local shops here at the beach. Bought mine new had the year. We added another from a tcp card at the time... then one day "nothing " just gone... I never ever got anyone to take me seriously email response was slow as a snail 🐌 I would never ever ever ever spend that Money again. If you wanna gamble $$1200 🎰 then go ahead an buy Autel by all means. But as I said I'm at every shop in town an I've made it very known. A man loses a 1200 dollar year.. he deserves a response. But not autel lol. Just wow get the Xtool or a Solus. Thank me later. I'm sure he'll delete this... 🎉
@ArthurFleck-tx9di22 күн бұрын
An the irony I'm a Hardin lol
@GreekGodEddie24 күн бұрын
great info! i plan on getting an autel soon to do everything i need for mobile mechanic services
@MrOscar442cutlass24 күн бұрын
is this for a new module only?
@muhammedyousif237624 күн бұрын
halo : I'm very confuse looking through internet for fully courses about diagnostics and programing. what is right pleas to start ?
@AutelConsultancy24 күн бұрын
Thats difficult to find, I am the only one that offers training for the programming. I think with diagnostics alot of it will come from having access to the right information and also experience. It would help if you got a mentor of some sort
@solosolo125524 күн бұрын
for some reason the manual only shows MC9s 12 XEQ 384, but I have HPLA -XET 256, and how can I connect to it?
@mariaevans762227 күн бұрын
How much does your mentorship cost
@nsubugaisaac730527 күн бұрын
How can I get those tools please
@AutelConsultancy27 күн бұрын
You can book a diagnostic tool consultation with me if you want my training and consulting. If you dont need training and support you can purchase locally. My website is aueltech.co.za. Make sure you book the DTC service
@nsubugaisaac730527 күн бұрын
Thx you so much
@nevillecook814227 күн бұрын
can austel programe a 2000 volvo c70 key
@segounlocks502927 күн бұрын
Everyone there is an issue with the title this is 2013. We all know this isn't possible in 2014 as it uses the newer security. Let's move past that!!!
@davidcespedes287129 күн бұрын
Thank you so much for your videos , questions why do you disconnect the negative ⚫️ battery terminal and not the positive 🔴? What difference does it make? Thanks so much. You are the best ,,, thank you for time
@Canbus_AT16 күн бұрын
u disconnect the negative battery cable first because working on the negativce side first is no danger when touching other things, if u disconnect + first u can touch something with your tool and sparks will fly, so u teach to disconnect negative first so those accidents dont happen in the first place
@davidestate29 күн бұрын
Great video.. I'm not a mechanic however I can do most things on my own car and my friend's cars. I just had an issue with my Left Headlight control module as I used the MBII to see what was up. I lost my left lights except my DRL. I ordered a new module and to save cost, I installed it myself (which was easy). I didn't test the new module but my DRL remained working however my right side started to do some weird stuff. I was able to book a week later to Mercedes to program the module but when they tried they said they could not see the module and figured it has to do with a wiring related issue. I advise them that I had many code come up, (General Error) and as such many time the CAM disconnects the power and that they should cycle the modules. He didn't believe this. Anyways I requested to pick up the car and see what was wrong on my own without further cost. When I picked up my car I noticed my DRL were working on both sides, and there were no codes on my dash. I connected my MBII to guess what, the module showed up. My thought is when the code errors come up, CAM disables power however after they returned the car to me, the module woke up and handshaked. Now I figure the error will only happen once the car request lights on, as they drive it into the shop. How can I get it programmed without the lights turning on and produced the error that CAM will take over and cancel any handshake? Thanks
@regularchampentertainmentllc29 күн бұрын
how did you bypass the main menu to get to programming on Maxisys Elite ?
@johnnysprocketzАй бұрын
whats with all the shaking bro
@egimene1Ай бұрын
sorry 4E28B mask
@egimene1Ай бұрын
I have a IM608 and gbox
@egimene1Ай бұрын
Can you programming a 2000 ML320 ecu w/ mcu Motorola b58289 E428b mask
@trentondahm5471Ай бұрын
I’m interested
@abderalou4386Ай бұрын
good explanation not like old generation saldaring wires killing and broken mcus box's this Eutel is very easy to use and practice new cars it s difficult or impossible make akl without deayler servers all mcus data came from backend😂
@DCrabbeJАй бұрын
ARE YOU STILL DOING CONSULTING?
@trevorkents7900Ай бұрын
Does the process work for VW amarok 2013?
@daniellerobinson7323Ай бұрын
Any update on Intelligent diagnostic feature? I believe that any ultra that gets updated to the latest firmware update will have theirs removed? Any confirmations or personal examples of this?
@AutelConsultancyАй бұрын
Hello. I just sold an update t card to one of my clients yesterday who purchased his tool from me 2 years ago. All the features were still there and nothing was removed.
@stitchedbyfeliciaАй бұрын
Me too my scanner cost $4500 and now I can’t use it pretty sad
@realtech934529 күн бұрын
You can't use it at all or just the topology? It's not like you can't diag a car without it. It's just a nice feature. I have to keep my SUB current for FCA access, it's just part of the way it is now.
@audriuskimtys7943Ай бұрын
Does this MB was with FBS4 system or FBS3? Thanks! Because some manipulations can be done only with ABRITRES so far, of course if system is FBS4.
@AutelConsultancyАй бұрын
Hello, The vehicle is an FBS3. I actually made a mistake when identifying the vehicle as its not a 2014 as listed on my title and presentation. I was an error on my part
@audriuskimtys7943Ай бұрын
@@AutelConsultancy Its not big problem :) just asking for assurance :) great video, thank you! :)
@segounlocks502928 күн бұрын
There are a few 2014 with old system@@AutelConsultancy
@DavidPetrisorАй бұрын
The facelift e350 is a fbs4 system how can u virgin and adapt a fbs4 system
@DavidPetrisorАй бұрын
This isn’t possible on a 2014 only 2013 and older so u should fix ur title people will think u can do this to the fbs4 system which u can’t
@AutelConsultancyАй бұрын
@@DavidPetrisor Hey Dave. You are correct this is an error on my part. I cant change the video unfortunately.
@DavidPetrisorАй бұрын
@@AutelConsultancy damn sorry u can’t change it hope people don’t start thinking we can do fbs4 with aftermarket tools also u should of used the preface lift e class as all facelift ones are fbs4
@AutelConsultancyАй бұрын
@@DavidPetrisor Im sure there might be some people who find out the hard way if they didn't pay attention the vehicle selection I did ( and if they didn't read the comments section) . But if they watch my videos I always preach to check by VIN if the function is there on the tool before you commit. I got alot of comments of people who watched a you tube procedure, then when they bought a tool only to find out the the function isn't their for the VIN they are working on. Hopefully the audience learns the procedure versus the error
Пікірлер
Great video. Thank you
hi there , at 15:02 , you put a new 16 digits key password different than the password you pulled it out from the key at minute 10:39 , can you tell me how you got this number ? and where you got it from ? thank you
Hi sir, does this product is still usable with Topix cloud online programming or we need the original DoIP device for programming ?
It still works. I used it yesterday for a client who recently purchased it
Thank you for these videos , extremely well explained
How about if you don’t have the QR code?
Hello dear friend . I have the Autel maxiim km100 . I make all key lost for my car Honda civic 2006 hatchback , but the green key flashing and say Replace MPCS/MICU/IMOES' function. They have other option in the menu of KM100 to select
Thanks Curtis. I purchased the Ultra when it first came out. I did nor renew the subscription. Will I loose the intelligent feature if I update?
he's a Genius , period A real Genius Bravo Sir
What software is this? Is it vcds?
You are my favorite thanks for your help
Any one knows if you can add a key on 2019 Jetta with 508and xp400.?? please
Can l just clone the fob with ikey without connect to the car so l can get duplicate key? Or l need to let the car know l have extra key fob. I plan to buy km100x.
If I have the autel 508 and xp400 can I do the same thing???
Please just tell me when you have to extract the pin number I didn't see it in the video please..
Question! Can IP616 do this kind of programming with the XP400?
i have a question? im not a shop and want to buy an autel ms 906 pro, and i only want it to be able to maintain my 2021 jeep, if i buy it and dont renew subscription will it loose any functions as far as working on the same 2021 jeep i bought it to work on?
Thanks!
Thanks for sharing
Can this be done with volvo modules? Tia
Can this be done with an ultra ev
No but the Ultra kits I sell comes with a tool that does .
I have an issue with fem not communicating with the dme car was running fine 2 weeks later a bunuch of codes.and the fuel pump keeps running on check position no crank nothing
Good morning I would like to get in touch with you. My phone with all my contacts was destroyed.
Ill send you an email
Hello, Im trying to program extra key for my 2020 nissan sentra with my Autel KM100E, (will be using autel nissan universal key) but it keep failing at "Step 2: Get a Pin". when i check autels "guide" it tells me that i need some additional cable that plugs in into BCM in the dash board. I have a suspicion that special cable is for another atutel key programmer and not KM100E. When i go to youtube i found multiple videos where people were able to progam nissan key just with Autel KM100E. I also noticed that setting little different, and version of nissan soft ware is different, mine is "Nissan V1.71", where all the people on the to KZread use version "Nissan V1.60". What do you think the problem is? Autel tech support is useless! :(
Can I get your number so I can call you Monday
I got the code with no symptoms been. Bought the car not long ago but have put a few thousand miles still with no symptoms.
((((Want real advise?))) Do what I'm about to do with my 908sPRO PAPERWEIGHT! !!! Sell it. Get the XTool. I've been with Autel for years. Live in a tourist town. An get subbed by all local shops here at the beach. Bought mine new had the year. We added another from a tcp card at the time... then one day "nothing " just gone... I never ever got anyone to take me seriously email response was slow as a snail 🐌 I would never ever ever ever spend that Money again. If you wanna gamble $$1200 🎰 then go ahead an buy Autel by all means. But as I said I'm at every shop in town an I've made it very known. A man loses a 1200 dollar year.. he deserves a response. But not autel lol. Just wow get the Xtool or a Solus. Thank me later. I'm sure he'll delete this... 🎉
An the irony I'm a Hardin lol
great info! i plan on getting an autel soon to do everything i need for mobile mechanic services
is this for a new module only?
halo : I'm very confuse looking through internet for fully courses about diagnostics and programing. what is right pleas to start ?
Thats difficult to find, I am the only one that offers training for the programming. I think with diagnostics alot of it will come from having access to the right information and also experience. It would help if you got a mentor of some sort
for some reason the manual only shows MC9s 12 XEQ 384, but I have HPLA -XET 256, and how can I connect to it?
How much does your mentorship cost
How can I get those tools please
You can book a diagnostic tool consultation with me if you want my training and consulting. If you dont need training and support you can purchase locally. My website is aueltech.co.za. Make sure you book the DTC service
Thx you so much
can austel programe a 2000 volvo c70 key
Everyone there is an issue with the title this is 2013. We all know this isn't possible in 2014 as it uses the newer security. Let's move past that!!!
Thank you so much for your videos , questions why do you disconnect the negative ⚫️ battery terminal and not the positive 🔴? What difference does it make? Thanks so much. You are the best ,,, thank you for time
u disconnect the negative battery cable first because working on the negativce side first is no danger when touching other things, if u disconnect + first u can touch something with your tool and sparks will fly, so u teach to disconnect negative first so those accidents dont happen in the first place
Great video.. I'm not a mechanic however I can do most things on my own car and my friend's cars. I just had an issue with my Left Headlight control module as I used the MBII to see what was up. I lost my left lights except my DRL. I ordered a new module and to save cost, I installed it myself (which was easy). I didn't test the new module but my DRL remained working however my right side started to do some weird stuff. I was able to book a week later to Mercedes to program the module but when they tried they said they could not see the module and figured it has to do with a wiring related issue. I advise them that I had many code come up, (General Error) and as such many time the CAM disconnects the power and that they should cycle the modules. He didn't believe this. Anyways I requested to pick up the car and see what was wrong on my own without further cost. When I picked up my car I noticed my DRL were working on both sides, and there were no codes on my dash. I connected my MBII to guess what, the module showed up. My thought is when the code errors come up, CAM disables power however after they returned the car to me, the module woke up and handshaked. Now I figure the error will only happen once the car request lights on, as they drive it into the shop. How can I get it programmed without the lights turning on and produced the error that CAM will take over and cancel any handshake? Thanks
how did you bypass the main menu to get to programming on Maxisys Elite ?
whats with all the shaking bro
sorry 4E28B mask
I have a IM608 and gbox
Can you programming a 2000 ML320 ecu w/ mcu Motorola b58289 E428b mask
I’m interested
good explanation not like old generation saldaring wires killing and broken mcus box's this Eutel is very easy to use and practice new cars it s difficult or impossible make akl without deayler servers all mcus data came from backend😂
ARE YOU STILL DOING CONSULTING?
Does the process work for VW amarok 2013?
Any update on Intelligent diagnostic feature? I believe that any ultra that gets updated to the latest firmware update will have theirs removed? Any confirmations or personal examples of this?
Hello. I just sold an update t card to one of my clients yesterday who purchased his tool from me 2 years ago. All the features were still there and nothing was removed.
Me too my scanner cost $4500 and now I can’t use it pretty sad
You can't use it at all or just the topology? It's not like you can't diag a car without it. It's just a nice feature. I have to keep my SUB current for FCA access, it's just part of the way it is now.
Does this MB was with FBS4 system or FBS3? Thanks! Because some manipulations can be done only with ABRITRES so far, of course if system is FBS4.
Hello, The vehicle is an FBS3. I actually made a mistake when identifying the vehicle as its not a 2014 as listed on my title and presentation. I was an error on my part
@@AutelConsultancy Its not big problem :) just asking for assurance :) great video, thank you! :)
There are a few 2014 with old system@@AutelConsultancy
The facelift e350 is a fbs4 system how can u virgin and adapt a fbs4 system
This isn’t possible on a 2014 only 2013 and older so u should fix ur title people will think u can do this to the fbs4 system which u can’t
@@DavidPetrisor Hey Dave. You are correct this is an error on my part. I cant change the video unfortunately.
@@AutelConsultancy damn sorry u can’t change it hope people don’t start thinking we can do fbs4 with aftermarket tools also u should of used the preface lift e class as all facelift ones are fbs4
@@DavidPetrisor Im sure there might be some people who find out the hard way if they didn't pay attention the vehicle selection I did ( and if they didn't read the comments section) . But if they watch my videos I always preach to check by VIN if the function is there on the tool before you commit. I got alot of comments of people who watched a you tube procedure, then when they bought a tool only to find out the the function isn't their for the VIN they are working on. Hopefully the audience learns the procedure versus the error