Пікірлер

• 
  @DavidSondermann15 күн бұрын

  Welches Android Auto Radio hast du da verbaut?

• 
  @richli80815 күн бұрын

  A-sure Android Radio

• 
  @flowerpower60076 ай бұрын

  Are there any ideas how to put the torx bolts out?

• 
  @flowerpower60076 ай бұрын

  I tried it with the power of a drilling machine but they're drilled too firmly

• 
  @allieandmariaАй бұрын

  They are 'threadlocked'. Grab some pipe to fit over your socket wrench handle to gain more leverage. I used copper pipe which, surprisingly, didn't bend.

• 
  @ALs_Autos7 ай бұрын

  Super clean car underneath mate, unfortunately the uk weather destroys ours 😂

• 
  @richli8087 ай бұрын

  Cheers! Yeah we have salt on the road here in winter too (Switzerland), but the car doesn't get driven much because it's always broken 😂.

• 
  @hardknocklife72109 ай бұрын

  I had this problem as well with my cim all I had to do was put a small piece of foam behind the steering column before locking it in position and it worked , basically just moved the column casing forward 1mm so the contacts work

• 
  @richli808 Жыл бұрын

  Oil feed gets disconnected at the bottom of the engine near the oil pump. The oil feed pipe stays on the turbo and it all comes out together. At the end of the video you can see both the oil feed and oil return lines are still on the turbo assembly after I got it all out.

• 
  @ecobooost_power3344 Жыл бұрын

  Did you undo the oil feed line from the turbo or from underneath ?

• 
  @charliefield8044 Жыл бұрын

  Hi mate, I see you put an inline in, otherwise it’s literally red to reds and ground the black. So much easier then Iv been seeing and reading… what size inline is that please? Also does it need to have it? Does it have to be glass fuse like you got or can I use a mini blade one

• 
  @richli808 Жыл бұрын

  Hi, I think it was a 10A fuse, and it came with the camera kit. I figured since it came with the kit then I should probably use it. :)

• 
  @charliefield8044 Жыл бұрын

  Okay thanks, so I used a 10a mini blade fuse. Done your loop just in a different direction, so I’m fairly certain it’s not that… however, where do you go into the back? Iv gone into the thick red power lead on main loom. Iv read somewhere about a pink lead? Mine only seems to be on the aftermarket loom

• 
  @fernando.alvarez.123 Жыл бұрын

  I wonder why not to have the back camera always available, always power up? Then the driver could choose when to take a look backwards.

• 
  @richli808 Жыл бұрын

  Yes that could be an option. But I only have one screen and most of the time it's displaying music! 😁

• 
  @fernando.alvarez.123 Жыл бұрын

  After only 1000km!!! Ignorant me, had expected a cleaner look of it!

• 
  @richli808 Жыл бұрын

  Me too.

• 
  @djshakalfeatdjpizdygeev699 Жыл бұрын

  And what was the problem? me too, but only from the exhaust manifold, zafira a opc z20let 192p.s.

• 
  @richli808 Жыл бұрын

  Leaking valve stem seals. Head off.

• 
  @djshakalfeatdjpizdygeev699 Жыл бұрын

  @@richli808 Thank you very much for your reply!

• 
  @lorenzosantoro2485 Жыл бұрын

  Opel Zafira B = group B spec 🤣🤣🤣? It looks mint mate!

• 
  @Vinnievxr666 Жыл бұрын

  Well done mate that’s coming along nicely you done a really good job there 💯👌🏼👍🏼

• 
  @richli808 Жыл бұрын

  Thanks 👍

• 
  @fernando.alvarez.123 Жыл бұрын

  It looks so good! Good work!

• 
  @richli808 Жыл бұрын

  Thanks Fer!

• 
  @Yodaracing1 Жыл бұрын

  Awesome mate top work !!! 🙌🙌

• 
  @richli808 Жыл бұрын

  Thanks! I had my moments of depression, thinking I would never finish it. Then I watched your videos and I realised it wasn't so bad. 😅😅

• 
  @Yodaracing1 Жыл бұрын

  @@richli808 😂😂 yea deffo would choose that over what I’ve been through lol

• 
  @team3383 Жыл бұрын

  Cool. Taken mine out now. Thanks.

• 
  @cenariusbg Жыл бұрын

  do you really need to remove the front seat out? Or you can manage without getting the front seat and battery out? Are there any airbags in the bench seat for the zafira?

• 
  @team3383 Жыл бұрын

  @@cenariusbg No need to take front seat out. Have no idea why he did !? No airbags in the bench seat.

• 
  @allieandmariaАй бұрын

  @@cenariusbg Nope, yep and nope. Did mine yesterday. Remove the bolts nearer the front of the bench first, slide the bench seat forward, then remove the bolts nearer the rear, then simply lift out. Center rail is easily cleared. FYI, the bench seats weigh about 40kg!

• 
  @cenariusbgАй бұрын

  @@allieandmaria wtf! 40kg for a bench seat. I use my car for work often and I really hate the middle seat. It takes so much space. If i could remove it easily I would fit so much more stuff, but I am always in a hurry and never justified the time to remove the bench seat so if I have to transport something big I just ride with the 5th door open (in Bulgaria police is not that strict so i don't care much). Thanks for the information, if I do need to remove it at some point I will make sure that I have a buddy to help me out.

• 
  @allieandmariaАй бұрын

  @@cenariusbg I'm converting mine to a car camper. With that bench seat removed (and taken to the dump (further dismantling makes the weight a little more manageable)), I can get a standard inflatable mat in there ~191cm. Those 30cm of now liberated space make all the difference. I can now carry 133 cans of beans for the same weight. That should last me a while!

• 
  @msaeed4614 Жыл бұрын

  Hi, what size in line fuse did you use?

• 
  @kamrankhanblu-raysandcolle9101 Жыл бұрын

  Hi mate, I have just buyed a Zafira 2011 plate. The sat nav you have in the bit of, where the clock is, what do you put in the search bar to get 1 ?

• 
  @richli808 Жыл бұрын

  I got this A-sure Radio: a-sure.com/products/7-android-9-0-gps-navi-car-radio-with-4gb-ram-64gb-rom-for-opel-corsa-astra-antara-vectra-meriva-zafira-vivaro-kmqovb6 Model :KYQ_OVBJ 4GB DDR3 ROM 64GB RAM It's OK. Sound is good. Some minor negative points: Cross-talk/interference from the CPU audible when nothing is playing. The Launcher/default screen is not very configurable No slot or cable for a SIM card Spotify app is buggy Tidal app is unusable because it's missing some controls I would consider this one, because the Launcher looks better a-sure.com/products/8-silver-android-10-dab-gps-navi-car-radio-with-octa-core-4gb-ram-64gb-rom-for-opel-vauxhall-corsa-astra-antara-vectra-meriva-zafira-vivaro-%e7%9a%84%e5%89%af%e6%9c%ac Check out idoing - they have an android radio with 6GB ROM. Don't know if it fits the Zafira though.

• 
  @kamrankhanblu-raysandcolle9101 Жыл бұрын

  Hi, not the A-sure radio, the sat-nav on top. Where the clock was ?

• 
  @richli808 Жыл бұрын

  @@kamrankhanblu-raysandcolle9101 it's the original that came with the car.

• 
  @kamrankhanblu-raysandcolle9101 Жыл бұрын

  In England, it’s just a standard clock, we don’t get a sat-nav

• 
  @mrljgibson Жыл бұрын

  I'll just leave them in then. 🤣

• 
  @marchochheim82994 жыл бұрын

  Hatte ich auch 👌🏼

• 
  @flyingnorseman5 жыл бұрын

  I understand the riding load stress on the stem doesn't exactly stress these bolts but my replacement wouldn't be same as the one that cracked. I'd gain a few grams along with durability and opt for a Thomson.

• 
  @flyingnorseman5 жыл бұрын

  Ha! You nailed my life in the first 30 seconds. I tell you the worst damn part, she wants biking to be a family affair now. Wants me to drag 3 kids out biking with me. I said make your damn all day tennis matches a family affair. Im well on my way to the X zone.

• 
  @richli8085 жыл бұрын

  Ahahaha! Good luck my friend!

• 
  @m00nchildblues6 жыл бұрын

  Took me 5 hrs at 98% w no bubble. Just wish they had more coverage on inside pivot link.rode first time BAM 1/8" CHIP! Arrgh!

• 
  @kianery6 жыл бұрын

  I got the exact the same bike and invis, I think it’s going to much detailing to do to put it on (don’t have patience) I don’t think I can’t do it.😬😬. I’m going to make a mess for sure.

• 
  @richli8086 жыл бұрын

  It's worth taking the time to put on the invis. After just one ride it was already saving the frame from stone chips. The key is the preparation, and the right soap to water mixture. If you don't want to do invis I would at least put some thick rubber tape like scotch 2228 on the down tube.

• 
  @richli8086 жыл бұрын

  kzread.info/dash/bejne/qnpplNtqmpiXdJc.html

• 
  @PhilipDoddFrance6 жыл бұрын

  Did you not notice the warning right by the torque settings you refer to? I appreciate you must be a bit hacked off, but it's written there right next to the setting; lesson learned I guess, never trust generic torque settings, double check with component specific...

• 
  @TeamCykelhold6 жыл бұрын

  That's pretty shitty from YT. Even though they covered themselves by saying it's a guideline, they made a mistake and should at least help you partly with a new bar. I just bought a Jeffsy (it's in the mail right now) and tbh this doesn't inspire me with a lot of confidence in YT...

• 
  @OhZesta6 жыл бұрын

  did u need a shock pump when unboxing your bikes?

• 
  @richli8086 жыл бұрын

  Nope. The only thing you need for unboxing is a set of Allen keys, to mount the derailleur, handlebar and pedals (bought separately). Then you can go for a ride! But you should really adjust the sag in your shock/fork to fit your weight, and for that you will need a shock pump.

• 
  @richli8086 жыл бұрын

  Here's a guide to setting your suspension sag from the lovely guys at gmbn. kzread.info/dash/bejne/iHuTwbeugpqXnM4.html