Пікірлер

• 
  @MrSki-mv2kr3 ай бұрын

  Too many trip hazards, I have a much better set up with my DIY removable T-bar with 4 holders on steel pipe. I also made the actual pipe clamp pole holders quick adjustment for angle with 1 longer bolt with a large wing nut per holder. That allows me to tiptoe rod angle, very sturdy even with catfish and tight drag. I basically used monster T-bar design but with a pipe. A small 1/3 circle with multiple 1/4 in holes welded to pipe allows me to use quick push/release pin for adjustment. Simple, powder coated with heat gun. Anything worth doing should be done right. I have made several of these and my idea is patented. Great for crappie up to medium heavy, not used for ocean heavy duty. 300lbs per holder is working load and no bigger than millennium crappie rod holders with all the same adjustability at much stronger use.

• 
  @aquaticadventures50883 ай бұрын

  Nice! He just slapped this together, it worked for the time he had the boat but now they have a 24ft center console so none of this is needed. Would love to see your setup though, do you have it posted anywhere?

• 
  @CC1. Жыл бұрын

  Gotta love Carvins man

• 
  @aquaticadventures5088 Жыл бұрын

  Definitely! I love that place, and need to get back out there!

• 
  @michaelboykin9881 Жыл бұрын

  Well........my...........thoughts are...........this. this ............video uh uh uh ........sucks. waste uh.........waste of uh..........uh time.

• 
  @enricorizzo9318 Жыл бұрын

  I love Fishin n stuff this

• 
  @aquaticadventures5088 Жыл бұрын

  Keith is a great dude!

• 
  @eddyshook5930 Жыл бұрын

  Good lord. Do everyone a favor and stop making videos or at least wake up before you start filming 🤦‍♂️

• 
  @allkindsofoutdooractivities Жыл бұрын

  Good video.

• 
  @aquaticadventures5088 Жыл бұрын

  Thank you!

• 
  @rockytopwrangler2069 Жыл бұрын

  ... Unfortunately he's already done a bunch of PVC builds ... probably not much left ...

• 
  @aquaticadventures5088 Жыл бұрын

  Very true, I really enjoy his stuff! I'm a full time woodworker and I've been trying to get time to do some nice wooden rod holders and such, so trying to do something a little different!

• 
  @bryanlowhorn2736 Жыл бұрын

  We did that same cruise out of Port Canaveral on the Carnival Majic a couple years ago. Great itinerary! Thanks for the look at the rod holder. Getting ready to build one for my boat and thus gives me some good ideas! New sub for you as well.

• 
  @aquaticadventures5088 Жыл бұрын

  Nice! I love cruises, I can spend 3k on a house in the outer banks for the week, plus have to buy food and everything else or I can spend 3k on a balcony room, go to multiple islands, have food included(especially Guy's Burgers 🧨🧨🧨) and be on a big ship that I can't fish off of... its really the best bang for the buck in my opinion! Thanks for watching man! I appreciate it! Need to get some more videos going 😂

• 
  @markwybierala49362 жыл бұрын

  I got a mustache.

• 
  @aquaticadventures50882 жыл бұрын

  Very nice! My wife made me shave it so it's back to the beard... but a beard is just a mustache hiding in plain sight 😂

• 
  @Addygirl529122 жыл бұрын

  I went on that first slide that you shown and I almost fell off every time I went on it

• 
  @aquaticadventures50882 жыл бұрын

  Yeah its a sketchy one! I fell off once when we came back down and crossed the stream of water haha. Still super fun though!

• 
  @medabee13222 жыл бұрын

  Finally get to see the inside of the cabana

• 
  @aquaticadventures50882 жыл бұрын

  The ones outside are pretty nice. The indoor ones are just canopies like people put on their decks or in their yards. Still nice to have a guaranteed chairs lol

• 
  @edwardmontelongo25262 жыл бұрын

  I have the same boat. If you ever switch out any of the electronic faceplates let me know. I’ll buy them off of you. Can’t find them anywhere. Thanks

• 
  @aquaticadventures50882 жыл бұрын

  Man, funny story... I sold my boat with the intentions of purchasing a center console. My wife told me after we got a new camper I could get one... its been a year and a half and I still haven't even seen a picture of my new boat 😂

• 
  @The_Backwoods_Misfit2 жыл бұрын

  Great job.

• 
  @aquaticadventures50882 жыл бұрын

  He comes up with something good every now and then 😂

• 
  @CD197552 жыл бұрын

  On all of KZread, this is the only PVC rod holder video that doesn't look like it would snap like a twig! 👏🏼👏🏼👏🏼 I have a multi-purpose boat and use PVC for quite a few projects, so I'm always looking for ways to use it. This one DEFINITELY will! Thanks guys!!

• 
  @aquaticadventures50882 жыл бұрын

  It definitely held up really well! Way better than the thin walled stuff I used. I've considered building a similar one using metal EMT conduit just for the strength. Even the thicker schedule 40 pvc can get brittle in colder temperatures and end up breaking. Let me know how it works out for you!

• 
  @steveschisler75532 жыл бұрын

  👍👍Come on wifey, let him cut it in the house! 😉

• 
  @aquaticadventures50882 жыл бұрын

  😂😂 she still won't let me cut stuff in the house, I bought a 14x36 storage shed though so now I cut whatever I want, whenever I want to lol

• 
  @CaboWabotv2 жыл бұрын

  How hot does the unit get? Im kinda scared to mount it close to my gas tank.

• 
  @aquaticadventures50882 жыл бұрын

  It gets warm but not nearly hot enough to ignite gasoline. And as long as you have your connections good and secure there would be no arcing at the battery terminals and the charger itself is sealed so you're good there as well. I never noticed anything that would be a cause for concern.

• 
  @jonathanallen66812 жыл бұрын

  Where did you get that carpet? What kind and approximately how much was it? Thanks!

• 
  @aquaticadventures50882 жыл бұрын

  He actually got that carpet at lowes, and is lowes item number 749401 and was less than a dollar per square foot. Thanks for watching!

• 
  @jonathanallen66812 жыл бұрын

  @@aquaticadventures5088 great, thank you!

• 
  @aquaticadventures50882 жыл бұрын

  No problem man! Let me know how it turns out for you!

• 
  @JasonZ173 жыл бұрын

  Easy fix for the sealing part is just put some heat shrink on it. Can get you some for less than 10 bucks that's marine grade. I would also get a LED silicone spray that you could spray before using the shrink on it. Great video! Thanks.

• 
  @aquaticadventures50883 жыл бұрын

  That's a great idea, I have rolls of that at home and didn't even think of using it for that. I'll have to give that a shot on the next one! Thanks for watching!

• 
  @randallsmith44263 жыл бұрын

  Dude i love the way you handle the lower classless opinions. Great job keep em coming

• 
  @aquaticadventures50883 жыл бұрын

  Thanks man! No point in being rude and I've found that most people that complain about video quality or things similar, don't even make videos at all and probably couldn't even use editing software. Everyone has an opinion, and I'm good with that because we live in a free nation! Thanks for stopping by brother!

• 
  @johnnycarter19663 жыл бұрын

  Better build a retaining wall. Not thinking PVC is the right material! 🤣

• 
  @aquaticadventures50883 жыл бұрын

  😂😂😂 I'm planning on building better credit by selling this house and getting another that isn't so close to a creek. In 7 years thats the first time its ever gotten in the yard but I figured it would eventually. Its nice to sit on the back deck and hear the water running over the rocks but not so nice if I end up having a pool in my living room 😂

• 
  @catfishinwithcrow6853 жыл бұрын

  How about a better quality video

• 
  @aquaticadventures50883 жыл бұрын

  Still learning, have a long way to go but will get there. Thanks for stopping by and for your feedback

• 
  @sk8trcm13 жыл бұрын

  What glue did you use on the carpet?

• 
  @aquaticadventures50883 жыл бұрын

  We used the TEC Indoor/Outdoor carpet adhesive from Lowe's. If you also purchase it from Lowe's, the Lowe's item number is 673004. It held up pretty well, and Derek actually had to take a piece off to resize a hatch door and he almost never got the carpet back off.

• 
  @melvinwagner39893 жыл бұрын

  Well one thing is for sure, Fishin N Stuff makes a helluva lot better videos. He always has something to say. Instead of rambling on as if anybody cared about your musings, prep yourself a bit. But, from the looks of your shop, FNS has won already, you'll never get it started. Attitude sells. FNS always has an upbeat attitude on video. You sound like you just shot your dog.

• 
  @aquaticadventures50883 жыл бұрын

  Totally agree

• 
  @killercop693 жыл бұрын

  @@aquaticadventures5088 at least ur not being an ass. U rock!!! hhahahahahaaa

• 
  @aquaticadventures50883 жыл бұрын

  Absolutely man, there's no reason to be a jerk bait to someone just because they don't agree with me or have a gripe about something. Everybody is entitled to their opinion. Besides, I do tend to ramble a lot(and I edit a lot of it out too 😂) either way, I appreciate you stopping by brother!

• 
  @tarekspearminsk58763 жыл бұрын

  Is this board usable when trolling for spanish mackerel?

• 
  @aquaticadventures50883 жыл бұрын

  I haven't tried trolling around 5 knots with these boars but I'm sure they'd handle it. They work really well for trolling between 1-2 knots for striper, but probably wouldn't hurt to make them a little longer for salt water. If you try it please let me know how they work out for you!

• 
  @arthurmiller83013 жыл бұрын

  Your askin for a ass whippin lol

• 
  @aquaticadventures50883 жыл бұрын

  Maybe so 😂

• 
  @vereabsolutum91313 жыл бұрын

  Liviving next to a waterway will ALWAYS be a crap shoot. I live next to the Pacific Ocean. My family and I have had to evacuate because of tsunami alerts. Were you live is certainly a RED FLAG. Frankly it seems 99.9% of this is sort of a rant about the weather/a flood/nearly loosing your boat. .1% about calling out "Fish-N-Stuff. Was it your intent to bore?

• 
  @aquaticadventures50883 жыл бұрын

  Thanks for your feedback, stay safe out there 👍

• 
  @FishinNStuff3 жыл бұрын

  Happy New Year

• 
  @aquaticadventures50883 жыл бұрын

  Happy New Year brother! Hope you're doing well and staying healthy and catching tons of fattys!

• 
  @davidlittle49483 жыл бұрын

  It’s amazing that 2020 was such a train wreck for everyone. I’m like you, I think 2021 is going to move from 2020’s train wreck to the 2021 dumpster fire. Prayer that you continue healing and maintain a sense of humor. Old tools are nostalgic - I still have some of my dad’s stuff and he passed in 1976.

• 
  @aquaticadventures50883 жыл бұрын

  Yeah, it was definitely a super crazy year for sure! I appreciate the prayers, and can also guarantee I'll always keep a sense of humor... life is too short to be serious all of the time! I love those old tools, my grandpa passed when I was about 10 months old back in 1985 so I never got to know him but using his old table saw and drill press makes me feel somewhat connected to him. Plus, if you bought a new craftsman table saw it'd be made of plastic with an aluminum top instead of sheet metal and a cast iron top... I spent a lot of time dialing that thing in and she works like a champ minus being a little underpowered. Thanks for watching, and leaving a comment! Hopes to wherever you're at, you are staying safe and in good health as well as all of your family!

• 
  @fishaholic27nc503 жыл бұрын

  What are y’all fishing for? Do they hold the rods pretty good with big hits?

• 
  @aquaticadventures50883 жыл бұрын

  Oh yeah. We've 15+ pound striper hit these things. Definitely use the thick wall stuff because the thin wall gets brittle. We've had several channel and blue cats get on them as well. Not currently using them since my buddy got a center console with fancy built in rod holders lol

• 
  @dennisharrison47443 жыл бұрын

  Friend of mine has a fisher 15ft its a 1994 with a 40hp mercury i just got a alumaweld exspress 17ft with a 85hp yamaha solid aluminum no wood in it been fixing it up way i want it

• 
  @aquaticadventures50883 жыл бұрын

  Those alumawelds are absolute beasts! That thing should scoot with an 85 on it. I'm going to be in the market for a center console soon so I can make some salt water trips.

• 
  @leroyhyson81073 жыл бұрын

  Ahhhhhhhhhh finally! Can’t wait to make mine!!!! Thank you!!!!!!!

• 
  @aquaticadventures50883 жыл бұрын

  Yeah man! Let me know how yours turns out!

• 
  @leroyhyson81073 жыл бұрын

  What’s your email?

• 
  @boomerszn30943 жыл бұрын

  So cool!!!!

• 
  @aquaticadventures50883 жыл бұрын

  That place is so awesome! Still shocked that its all within a mall!

• 
  @Bar9Taxidermy3 жыл бұрын

  Made one for myself but just realized ip65 were not submersible. Did they hold up on your end?

• 
  @aquaticadventures50883 жыл бұрын

  I honestly didn't even pay attention to the IP rating lol. Which ones did you order? I can't say for 100% certain that mine still works, it worked all the way up until about March when we stopped striper fishing but I haven't been fishing since. Been having problems with my hands and ended up needing surgery about a month and a half ago, I'll be back on the water next week hopefully! I'll throw 12V to it tomorrow and see if she still works though

• 
  @Bar9Taxidermy3 жыл бұрын

  Used the one you used. Let me know if it still works I'm curious. We rented out a cabin with a private pier. Looking forward to trying mine

• 
  @aquaticadventures50883 жыл бұрын

  I'll actually just go ahead and run outside and hook it up to see, because now I'm curious too. They should be okay, they were sealed up pretty good. I did have an issue with my leaking the first time though lol so double check all of your joints and holes

• 
  @Bar9Taxidermy3 жыл бұрын

  I definitely will. I bought some water proof silicone, but it was a 7-14 day dry time. Nobody has time for that lol. So used a 2 part epoxy. Going to put flex seal over that tomorrow

• 
  @aquaticadventures50883 жыл бұрын

  That may have been my issue... I didnt even check the full cure time on what I used. The more I think about it, the more I think I should make an updated version with better connections, and maybe battery powered so there's no wires to run and get tangled up

• 
  @Bar9Taxidermy3 жыл бұрын

  What did you use for the float?

• 
  @aquaticadventures50883 жыл бұрын

  I used some foam that an electric motor came packaged in, but if I were to do it again I would probably use something different. If you had the capability, balsa wood would probably be a really good long lasting option, just add a good sealer to it. I may figure out something else and make a follow up video to this

• 
  @chrissingleton41963 жыл бұрын

  Is this still working for you? It has mixed reviews on Amazon

• 
  @aquaticadventures50883 жыл бұрын

  Yes sir, its working like a champ. I had noticed there were some bad reviews, but one was someone that said "there's no way the cords are long enough to charge 3 cars at one time." Given thats not what it's made for, you have to consider some of the types of people that are leaving reviews that really have no idea what they're doing 😂

• 
  @coopershane67524 жыл бұрын

  Very dirty not a lot to do

• 
  @aquaticadventures50884 жыл бұрын

  I thought they had plenty to do, my kids kept finding stuff to make me keep running all over haha. What part was dirty?

• 
  @coopershane67524 жыл бұрын

  Aquatic Adventures the people were dirty

• 
  @aquaticadventures50884 жыл бұрын

  Ah I gotcha. You can find that anywhere though really. We stayed at great wolf once and the staff was rude so I totally get where you're coming from

• 
  @cooperstewart9174 жыл бұрын

  The park is very fun though

• 
  @aquaticadventures50884 жыл бұрын

  Oh for sure, we had a blast!

• 
  @malloryclark43134 жыл бұрын

  i was just there its so fun

• 
  @aquaticadventures50884 жыл бұрын

  In my opinion it's better than great wolf! We are going back in september, but I doubt I'll get to do any water stuff which is going to stink just sitting there watching everyone else have fun lol

• 
  @lenenity40164 жыл бұрын

  I went last year with a friend and rode all the slides

• 
  @aquaticadventures50884 жыл бұрын

  Minty I was looking forward to actually getting to ride the big blue loop slide this year but I'm having surgery before we go so I wont get to... how was that one?

• 
  @lenenity40164 жыл бұрын

  Aquatic Adventures Pretty good!, Although you can get stuck (cause when i went someone got stuck) its a pretty fun ride!

• 
  @aquaticadventures50884 жыл бұрын

  Yeah I noticed a couple smaller girls getting stuck on it before we got in line and they shut it down lol. I'm sure with my weight I'd have no issues of going too slow and getting stuck in there. We rode a similar one on a cruise and it was awesome!

• 
  @FishinNStuff4 жыл бұрын

  That water level sucks man . You might better fill the sand bags

• 
  @aquaticadventures50884 жыл бұрын

  Did you watch till the end? Let me know what you think brother

• 
  @themarketingrobinhood-evro854 жыл бұрын

  Wouldn’t closed cell polystyrene work better? Won’t take on water. Open cell will right?

• 
  @aquaticadventures50884 жыл бұрын

  Yeah that would probably work a little better. Any of it is going to get eat up at some point. I have some self skinning expanding foam that's used for filling fake heads for props that I may try to mold for these as well as planer bobbers

• 
  @silentmajor4 жыл бұрын

  how do you hook up the charger to two 12volt batteries is series for 24 volts?

• 
  @aquaticadventures50884 жыл бұрын

  The way mine is set up, I have a jumper cable that I use to connect the 2 batteries that I hook up before I launch my boat so the charger hooks to those batteries individually. If they're constantly wired together I'm not sure if connecting the charger to one would charge both or not.

• 
  @fishinjunkee17014 жыл бұрын

  Like that idea 👍 Going to make that for my boat 👏👏👏👏👏

• 
  @aquaticadventures50884 жыл бұрын

  It works really well for trolling. I think I'm going to make a similar one for catfishing and see how she does!

• 
  @CHIPPOFISHING4 жыл бұрын

  a lighter can be used to strip wires

• 
  @aquaticadventures50884 жыл бұрын

  I've never tried that. I have since bought actual quality wire strippers since my new job requires them lol. That's a great idea, especially in a pinch if you're on the water and need to strip wire.

• 
  @CHIPPOFISHING4 жыл бұрын

  @@aquaticadventures5088 i bet a quality set is a lot easier to use better than the 30 year old cheap strippers i have, they do all right but I didnt want to damage the small guage wire , it was a short piece to begin with

• 
  @CHIPPOFISHING4 жыл бұрын

  lighter is amazing on cleaning up braid on a fish hook when you are trying to rerig

• 
  @Feathers2Flies4 жыл бұрын

  I always wonder how many beers may possibly have been involved in the making of these videos, love the content and keep it up, funny stuff

• 
  @aquaticadventures50884 жыл бұрын

  I rarely drink so really not that many lol. I'm already goofy enough, I dont need the alcohol 😂

• 
  @weiw37214 жыл бұрын

  Was thinking, if the light is water proof, why do you need to seal the tub at all? Is it for the wire connections? I suppose you could silicone over the shrink tubing to make that water tight ... just a thought.

• 
  @aquaticadventures50884 жыл бұрын

  Yeah I just wanted to protect the electrical connection. Plus with it sealed it keeps it buoyant and the weights in the bottom force it to stay vertical. I did have to seal mine a little better because it did leak a bit which made it want to sink even with the foam up top.

• 
  @weiw37214 жыл бұрын

  Thx for the build. Very nice. This led is rated ip65, meaning it is ok to get splashed,but not intended for submerged use. Did you get to use it much and was it able to hold up? Thx!

• 
  @aquaticadventures50884 жыл бұрын

  Sorry didn't see this comment in the notifications, I did use it a good bit and it's been holding up pretty well. I think I'm going to make a few different ones in different colors and see which have the best results. Zero issues after being submerged for approximately 15-20 hours though.

• 
  @weiw37214 жыл бұрын

  Is that a 1.5" pvc?

• 
  @aquaticadventures50884 жыл бұрын

  This one is 2" because I had some lying around but 1.5 would work just as fine and would give you a little more light vertically since you could get a few more wraps of the lights

• 
  @Tsuki77864 жыл бұрын

  Did you have a Cabana in the beginning of the video? Also, if possible, could you tell me what building involves the least walking for the most indoor/outdoor fun please?

• 
  @aquaticadventures50884 жыл бұрын

  Yes we were, and it is very warm in there as well but is the same way at Great Wolf. As far as the best building to avoid a lot of walking, I would imagine that the main building, in the main hallway right near the indoor park would be best suited to eliminate a lot of walking. We stay in the time share condos that a lady my mother in-law works with gets us, and even those aren't bad since they have shuttle service from all of those buildings. I feel like there's more to do than Great Wolf and it's not quite as expensive. Hope this helps!

• 
  @abfishingahmedb54464 жыл бұрын

  Cool idea

• 
  @aquaticadventures50884 жыл бұрын

  Yeah man! It worked out really well every time we used it and never broke in the cold so it was a win in my book! Lol

• 
  @imsojessicanichole38534 жыл бұрын

  Were going in march im sooooo excited

• 
  @aquaticadventures50884 жыл бұрын

  I love that place! It's so much fun! Thanks a ton for watching! 😁

• 
  @lifesdailynuggets4 жыл бұрын

  Found it

• 
  @aquaticadventures50884 жыл бұрын

  It's been forever man! We need to hang out sometime