do the 2 drain plugs get unscrewed open while flushing? or keep those closed?
@rickss6917 күн бұрын
Rear mounted rod holders suck for trolling on a ski...add them up front where you can actually see them.
@vyasshivang866025 күн бұрын
Is it safe to use front wheel drive car to launch a jet ski ?
@ZeffAUАй бұрын
might be worth learning how to tie the cleat hitches if you havent already... get the young fella on the case . Nice vid though gents, good way to spend a day
@77rockcityАй бұрын
100
@Killemgrillem002 ай бұрын
Picking up my 2024 SDFPT may 9 cant wait ,.Your video great !! Thank you.
@sasscers12 ай бұрын
Life jacket use?
@chrisboyce42223 ай бұрын
Great video thank you mate😊
@richiechristian14713 ай бұрын
Where are you in Florida. My name is Richie I live in Florida also I would like to go fishing sometime
@richiechristian14713 ай бұрын
I just bought one also
@michaelbjorgefineart46283 ай бұрын
Precious memories with your son, well done!
@erikrn87883 ай бұрын
Great video, bro. I have a Honda Accord too, but afraid not strong enough to pull a fish pro. How do you do with your car and jet ski? Thank you.
@cspalding8743 ай бұрын
How about not doing that in the channel
@ttm26095 ай бұрын
So, what is saltaway? Can someone explain the chemisty on this product? What is its pH?
@loquera305Ай бұрын
It's a solution that will eat or neutralize the salt
@ttm2609Ай бұрын
@@loquera305 🙄
@ricknoble35716 ай бұрын
Nice ideas I will use next time I’m out in the water thanks
@WRXXXual7 ай бұрын
Well done video, bud!
@ProstateCancerTRtR7 ай бұрын
Crab trap in too shallow of water? Also, some advice about the boat ramp... don't be the guy that is on one side of the two vehicle and two dock ramp that uses the other side's dock. That is hogging up the whole ramp. Great jetski.
@robertdepaulis51888 ай бұрын
Good to see people trying to give good advice . Perfect father and son day :)
@cowboysnation15949 ай бұрын
What is that adapter called?
@johannesvanhoek90809 ай бұрын
I enjoyed your peaceful video, but I noticed that you did not have a safety lanyard on, could be very dangerous for you and your son not having that also, life vest are necessary all the time, and there are specific ones for young ones , please be safe!
@mimiwalle72159 ай бұрын
❤
@RafaelRamos-ei8ro10 ай бұрын
Thanks for the video I learned a lot I am thinking of buying one for my boy David
@brycepatrick346610 ай бұрын
Hello, love the video. Do you have a link for that umbrella? I don’t want to order 12 of them till I find one that works. Thanks 🙏🏻
@raidersuckkok10 ай бұрын
terrible guide
@goldlad387510 ай бұрын
Do you dry blow it after retrieving JetSki on trailer?
@ExplorerPWC10 ай бұрын
Love the video!! No crabs but getting the young ones out on the water is PRICELESS!!!
@kathygoonen136210 ай бұрын
Anclote Island?
@lifetaste462710 ай бұрын
Yes 😀
@Grageolas_landscaping11 ай бұрын
I have a 97 Sea-Doo and he’s running a little rough
@greghowland389111 ай бұрын
Great job but to me freshwater would be fine. Sea-Doos have a closed-loop cooling system so the engine never sees saltwater
@PTRRanger95111 ай бұрын
Just a tip, don’t tie the line back on itself when it’s on the cleat. It can be hard to untie if there was a lot of pressure on the line. All you need to do is wrap is cross over itself like you did at the end of the video, only needs to be two or three times, and then flip the loop and hook it around the cleat, it locks down on itself. You can do it once more on the other side of the cleat to double lock it. No need to actually tie it at all. The harder the line is pulled, the harder it locks on itself. What I do after I load is pull it out of the water, stop on the ramp and start the ski for a couple seconds and blow out the water that’s sitting in the engine. Let gravity work on the incline. I also undo the plugs so any water can drain with gravity as I pull off the ramp. Don’t do it if it’s a busy ramp though. Just load and go. But if it’s empty use the extra time to use the incline of the ramp. Also have a way to have your bumpers be able to easily switch to the other side. I would just use the snap hooks instead of the small shackles like you have. If you come back to the ramp and you need to get out of the water in a hurry, the side of the dock you want to use maybe in use. So being able to put the bumpers on the other side in a few seconds is helpful. Don’t get comfortable just using one side. Depending on the length of the dock you can just dock it facing out so your bumpers are still on the side they are mounted, but not all docks have the room to be able to slide in and turn around, even on a PWC if there are other boats there. I would also just use the metal hook on your winch line and connect that to the bow. Reason is this, yes it has a soft loop, but that has less stitching than the hook itself, it’s also smaller webbing. What I have found is use the hook on the bow and then secure the soft hook back onto the winch using another snap hook or something. That way if the winch line itself fails, get cut, or the locking lever does not engage, the soft loop is connected to the trailer as well as will not allow the ski to slide back, and have minimal bounce in the front. It’s a fail safe. I also like to give a little slack with the dock lines if you are not using bungee type. Reason if if there are waves or wake, the slack will let the ski ride up with it, and not be held tight against the dock that is going to move at different times, or maybe not at all since the ski is lighter. You can break your lines, the hooks, or the cleats if there is too much force on them. It will also maybe force the ski under the dock edge, on top of your bumpers and scratch your paint. The boat needs to move a little with the water, not be super tight to the dock. If there are people walking on the dock and pushing it in the water, it will also push down of the top of the ski if it happens to be right under the edge. Letting it move a couple inches from the dock will also it to float on its own and not be forced to move with it. Once you are out of the water winch the boat again to make sure it’s all the way forward, sitting in water, and winching it to the stopper will still leave a little room when the ski is fully out of the water. Always wish it tight when it’s just resting on the trailer. You can usually get one more click out of it. You can see how much bounce there was in the front when you pulled out of the water as the ski fully rested on the trailer, that means there is some give in the rubber stopper and it’s bouncing on it, instead of being held by it.
@kennetholavarria804411 ай бұрын
That’s not cleaning you need to wash the whole ski with salt remover take off plate and wash whole engine compare with salt remover too then spart more work but your Jetski will last
@marlinlane245611 ай бұрын
I was told after the saltwater go to fresh water & ride it for awhile it will flush out the salt true or false
@40sumn54 Жыл бұрын
How did you get ur jbl strapped on like that???
@GOJIRA561 Жыл бұрын
I have the same JBL speaker and I want to mount it to my handle bars on my Yamaha vx cruiser. What straps did you use for that?
@Jetski270 Жыл бұрын
How to Lunch? You mean Launch
@tcperozi8831 Жыл бұрын
This saved me yesterday
@Lermithdz24 Жыл бұрын
How do you install the JBL speaker? Let me know please
@ronm7781 Жыл бұрын
sadly that knife is illegal in the People's Republik of New Jersey USA
@lifetaste4627 Жыл бұрын
Ohh man, I’m sorry!
@MichaelBrown-pg5dy Жыл бұрын
well done video, love that you didn't rush things
@lifetaste4627 Жыл бұрын
Thank you sir!
@Andr3s809 Жыл бұрын
I just want to know. Your Toyota is a V6 or V4
@lifetaste4627 Жыл бұрын
It’s V4
@kenneth9748 Жыл бұрын
That’s anclote park. Do you still ride your ski? Let me know and Im not too far in there. Be safe
@lifetaste4627 Жыл бұрын
Yes this is anclote, it would be nice to see you there.
@gsxr600mtele Жыл бұрын
Where did you get the Velcro straps for the speaker?
@lifetaste4627 Жыл бұрын
Amazon, search for diving knife straps.
@maximalniy Жыл бұрын
I bought fish pro recently and Garmin doesn't show the depth, how can i fix it? Thanks
@kelseywedge7167 Жыл бұрын
Don't forget your life jacket and that's called a dock not deck
@lifetaste4627 Жыл бұрын
Sorry for my strong accent.
@centralcal6604 Жыл бұрын
What kind of gps are u using?
@lifetaste4627 Жыл бұрын
Garmin.
@omardelgado9337 Жыл бұрын
Thank you for the video. May I ask where or what you are using to strap down your jbl speaker?
@lifetaste4627 Жыл бұрын
I bought them on Amazon, search for diving knife straps.
@doublec3 Жыл бұрын
Usually people bring this whole set when their camping away on vacation somewhere. Otherwise most rent them at local vendors near them for an hour or two.
Пікірлер
Learn how to properly use a dock cleat.
I found this funny and amusing. Good job.
do the 2 drain plugs get unscrewed open while flushing? or keep those closed?
Rear mounted rod holders suck for trolling on a ski...add them up front where you can actually see them.
Is it safe to use front wheel drive car to launch a jet ski ?
might be worth learning how to tie the cleat hitches if you havent already... get the young fella on the case . Nice vid though gents, good way to spend a day
100
Picking up my 2024 SDFPT may 9 cant wait ,.Your video great !! Thank you.
Life jacket use?
Great video thank you mate😊
Where are you in Florida. My name is Richie I live in Florida also I would like to go fishing sometime
I just bought one also
Precious memories with your son, well done!
Great video, bro. I have a Honda Accord too, but afraid not strong enough to pull a fish pro. How do you do with your car and jet ski? Thank you.
How about not doing that in the channel
So, what is saltaway? Can someone explain the chemisty on this product? What is its pH?
It's a solution that will eat or neutralize the salt
@@loquera305 🙄
Nice ideas I will use next time I’m out in the water thanks
Well done video, bud!
Crab trap in too shallow of water? Also, some advice about the boat ramp... don't be the guy that is on one side of the two vehicle and two dock ramp that uses the other side's dock. That is hogging up the whole ramp. Great jetski.
Good to see people trying to give good advice . Perfect father and son day :)
What is that adapter called?
I enjoyed your peaceful video, but I noticed that you did not have a safety lanyard on, could be very dangerous for you and your son not having that also, life vest are necessary all the time, and there are specific ones for young ones , please be safe!
❤
Thanks for the video I learned a lot I am thinking of buying one for my boy David
Hello, love the video. Do you have a link for that umbrella? I don’t want to order 12 of them till I find one that works. Thanks 🙏🏻
terrible guide
Do you dry blow it after retrieving JetSki on trailer?
Love the video!! No crabs but getting the young ones out on the water is PRICELESS!!!
Anclote Island?
Yes 😀
I have a 97 Sea-Doo and he’s running a little rough
Great job but to me freshwater would be fine. Sea-Doos have a closed-loop cooling system so the engine never sees saltwater
Just a tip, don’t tie the line back on itself when it’s on the cleat. It can be hard to untie if there was a lot of pressure on the line. All you need to do is wrap is cross over itself like you did at the end of the video, only needs to be two or three times, and then flip the loop and hook it around the cleat, it locks down on itself. You can do it once more on the other side of the cleat to double lock it. No need to actually tie it at all. The harder the line is pulled, the harder it locks on itself. What I do after I load is pull it out of the water, stop on the ramp and start the ski for a couple seconds and blow out the water that’s sitting in the engine. Let gravity work on the incline. I also undo the plugs so any water can drain with gravity as I pull off the ramp. Don’t do it if it’s a busy ramp though. Just load and go. But if it’s empty use the extra time to use the incline of the ramp. Also have a way to have your bumpers be able to easily switch to the other side. I would just use the snap hooks instead of the small shackles like you have. If you come back to the ramp and you need to get out of the water in a hurry, the side of the dock you want to use maybe in use. So being able to put the bumpers on the other side in a few seconds is helpful. Don’t get comfortable just using one side. Depending on the length of the dock you can just dock it facing out so your bumpers are still on the side they are mounted, but not all docks have the room to be able to slide in and turn around, even on a PWC if there are other boats there. I would also just use the metal hook on your winch line and connect that to the bow. Reason is this, yes it has a soft loop, but that has less stitching than the hook itself, it’s also smaller webbing. What I have found is use the hook on the bow and then secure the soft hook back onto the winch using another snap hook or something. That way if the winch line itself fails, get cut, or the locking lever does not engage, the soft loop is connected to the trailer as well as will not allow the ski to slide back, and have minimal bounce in the front. It’s a fail safe. I also like to give a little slack with the dock lines if you are not using bungee type. Reason if if there are waves or wake, the slack will let the ski ride up with it, and not be held tight against the dock that is going to move at different times, or maybe not at all since the ski is lighter. You can break your lines, the hooks, or the cleats if there is too much force on them. It will also maybe force the ski under the dock edge, on top of your bumpers and scratch your paint. The boat needs to move a little with the water, not be super tight to the dock. If there are people walking on the dock and pushing it in the water, it will also push down of the top of the ski if it happens to be right under the edge. Letting it move a couple inches from the dock will also it to float on its own and not be forced to move with it. Once you are out of the water winch the boat again to make sure it’s all the way forward, sitting in water, and winching it to the stopper will still leave a little room when the ski is fully out of the water. Always wish it tight when it’s just resting on the trailer. You can usually get one more click out of it. You can see how much bounce there was in the front when you pulled out of the water as the ski fully rested on the trailer, that means there is some give in the rubber stopper and it’s bouncing on it, instead of being held by it.
That’s not cleaning you need to wash the whole ski with salt remover take off plate and wash whole engine compare with salt remover too then spart more work but your Jetski will last
I was told after the saltwater go to fresh water & ride it for awhile it will flush out the salt true or false
How did you get ur jbl strapped on like that???
I have the same JBL speaker and I want to mount it to my handle bars on my Yamaha vx cruiser. What straps did you use for that?
How to Lunch? You mean Launch
This saved me yesterday
How do you install the JBL speaker? Let me know please
sadly that knife is illegal in the People's Republik of New Jersey USA
Ohh man, I’m sorry!
well done video, love that you didn't rush things
Thank you sir!
I just want to know. Your Toyota is a V6 or V4
It’s V4
That’s anclote park. Do you still ride your ski? Let me know and Im not too far in there. Be safe
Yes this is anclote, it would be nice to see you there.
Where did you get the Velcro straps for the speaker?
Amazon, search for diving knife straps.
I bought fish pro recently and Garmin doesn't show the depth, how can i fix it? Thanks
Don't forget your life jacket and that's called a dock not deck
Sorry for my strong accent.
What kind of gps are u using?
Garmin.
Thank you for the video. May I ask where or what you are using to strap down your jbl speaker?
I bought them on Amazon, search for diving knife straps.
Usually people bring this whole set when their camping away on vacation somewhere. Otherwise most rent them at local vendors near them for an hour or two.
What beach you are at?
Three Rooker Island
Crabs move with the tide