Пікірлер

• 
  @MrKmd2713 күн бұрын

  Your F3 is beautiful! I just picked up a '14 ST Limited. Prior to purchasing I sat on other models and really felt the most comfortable on the ST's. I am not a big mileage person, just like to do short runs of 20-30 miles after work and I'm good.

• 
  @chill6275113 күн бұрын

  @MrKmd27 Thank you. Most of my rides are, to, and from work. I've yet to do any real touring. I thought about buying an ST first. Just couldn't find the right one. Enjoy your Spyder! Ride safe.

• 
  @SIRyker13 күн бұрын

  Beth gets things wrong a few times. Now that being said if you have a comm system that clamps on to the helmet it might not fit in frunk unless you move the clamp towards the back of the helmet. I would also recommend a little microfiber rag placed over the visor to keep it from scratching the shield when you close lid.

• 
  @chill6275113 күн бұрын

  @SIRyker if my helmet with the Sena 10C Pro clamped the helmet fits in the frunk, I would think most comm systems would. But it may depend on the size of the helmet.

• 
  @SIRyker13 күн бұрын

  @@chill62751 I hear ya , for me it was the bottom of the Sena 50 that kept it from fitting when it was mounted in the middle of the helmet . When I moved it towed the back it fit just fine go figure .

• 
  @Damiyon19 күн бұрын

  Will the helmet fit in the side storages

• 
  @chill6275119 күн бұрын

  @Damiyon No, the saddlebags are not deep enough for a helmet.

• 
  @Damiyon18 күн бұрын

  @@chill62751 thank you crazy how no one mentions this

• 
  @meon327120 күн бұрын

  I have the Ryker . I can put both of my gloves in the frunk and close the lid . With enough room left for one sheet of tissue paper . I like the F3 and RT but I cannot figure out WHY Can Am doesn't make the side boxes larger ? The lean angle is not that big on the trikes !!!

• 
  @SgtJamesRay20 күн бұрын

  I got home forgot to check to see if it fit. As I'm walking out the door I remembered and I said, nope I'm not going to let it happen! I turned right back around and delayed my exit from the home just to make sure I checked to see if my helmet would fit! 😂 I put a video up and gave you a shout out 😊

• 
  @SgtJamesRay22 күн бұрын

  Lol I've had my F3 for 5yr and I've never even put my helmet in it! Lol Now I gotta get home and try it! Mine is a XL

• 
  @chill6275122 күн бұрын

  LOL. I have because I've stuffed my rear trunk with my work computer bag and other things so I had to put the helmet in there. I watched her and she didn't even try to put in the right way.

• 
  @SgtJamesRay29 күн бұрын

  Nice vid. I have the Roe II. I use it for everything LOL. The noise-canceling works really well when I'm on the spider. When I used it inside the semi truck I actually did have to get out of the truck to go to the back behind the trailer to do something. But I left the camera that it was transmitting to in the cab of the truck so it had to work for the distance from the front to the back of the truck a little over 80 feet. You should definitely do a drive with the mic

• 
  @chill6275129 күн бұрын

  Thanks Brother. I like the fact that it records directly to the transmitter. Gives me a backup if needed. I really appreciate you watching!!

• 
  @SgtJamesRay29 күн бұрын

  @@chill62751 Yup they all do. That recording on the Mike feature has saved my butt more than once.

• 
  @SgtJamesRayАй бұрын

  Nice mods. It's a little hard to judge sound quality that way but they're loud LOL My windscreen was the same way but it works fine I've had it for a while now.

• 
  @chill62751Ай бұрын

  @SgtJamesRay it's definitely louder. I can hear the music even at highway speeds

• 
  @SgtJamesRayАй бұрын

  @@chill62751 Lol Slingmods gets far too much of my money as it is.

• 
  @NoID1290TVАй бұрын

  Thanks for that video! I'm looking for this exact model or maybe the mini 4 pro

• 
  @chill62751Ай бұрын

  Personally, I prefer the larger drones. Texas can get windy at times. The Mini 4 Pro is a great drone as well. When you buy one, make sure to post some videos. Thanks for watching!

• 
  @jasonthompson9709Ай бұрын

  I love how you can screenshot/record the controls. It's awesome! glad you stopped at 7:15ish, I've had a power line scare once or twice. Luckily I didn't hit it but it seems they come out of nowhere lol Now I want that microphone addon for mine, As much as i talk to myself it'd be way better video.

• 
  @chill62751Ай бұрын

  Thanks for watching. I'm in Colorado right now. Hopefully, I can get some flying in before I leave.

• 
  @SgtJamesRayАй бұрын

  Nice accessories. All of my DJI drones have skins. No drone should go naked 😂 My mavic pro has a red skin but the batteries are skinned with the red Baron. You also know you can get the correct SD card at Walmart or Best Buy rather than waiting for it to be sent in

• 
  @SgtJamesRayАй бұрын

  What, no Avata 2?! lol

• 
  @chill62751Ай бұрын

  That one was on my mind, too. Don't it out yet.

• 
  @SgtJamesRayАй бұрын

  @@chill62751 Hurry up don't make me own one by myself. We ex-soldiers have to stick together LOL

• 
  @chill62751Ай бұрын

  ​@SgtJamesRay Are you going to release an Avata 2 video?

• 
  @SgtJamesRayАй бұрын

  @@chill62751 There are so many that I just put out a simple one of me flying. lol My Son up in MI got one too. kzread.infoYeZzT-X_Ank?feature=share kzread.info/dash/bejne/emZkz4-mmdCXpqw.html kzread.info/dash/bejne/nqWtqK-ep7KthtI.html

• 
  @mhbmiggy36524 ай бұрын

  Any one who has this gun do you guys know where to buy the side charging handle for this mine bro n I been looking everywhere for replacement

• 
  @chill627514 ай бұрын

  You can try trimports.com. I don't see a phone number on the site, but I was able to get one when mine broke.

• 
  @jamesfarmer635 ай бұрын

  You can get a after market 20 round magazine, I've got 5 ,20 round magazine and it fits fine in my silver eagle, & i hear there's a 25 round drum, and I'll get that too if i can find the company that has a hem,

• 
  @devfinessin97426 ай бұрын

  Who has the g4?

• 
  @user-vt2ee9uy8d7 ай бұрын

  Where did you get the fog lights ?

• 
  @chill627517 ай бұрын

  I don't know if you can still buy them. They are from Lamonster Garage.

• 
  @pooki_63327 ай бұрын

  What kind of barrel wrench do you use?

• 
  @chill627517 ай бұрын

  I use the wrench that comes with the shotgun.

• 
  @d.gibbons29798 ай бұрын

  Is the lower plastic or aluminum?

• 
  @chill627516 ай бұрын

  It's aluminum

• 
  @SgtJamesRay11 ай бұрын

  nice

• 
  @chill6275111 ай бұрын

  Thank you sir

• 
  @christophercharles3169 Жыл бұрын

  It doesn't look like the rear trunk is closed properly. Beautiful machine and great color.

• 
  @justinaustin7396 Жыл бұрын

  Mmmk, let's focus the camera a lil bit..😂

• 
  @terrydavenport5542 Жыл бұрын

  Can you tell me where you got the fog lights with the halo ring on them...???

• 
  @chill62751 Жыл бұрын

  I believe they were from Lamonster Garage. I don't know if they still sell them. These Spyders should come with them already installed.

• 
  @terrydavenport5542 Жыл бұрын

  @@chill62751 I looked on there site but didn't see them. Can you give me the name brand on the so I can look in other places. Thanks in advance..!!

• 
  @chill62751 Жыл бұрын

  @terrydavenport5542 Here is a link I found on the TricLED website. This is just for the halo rings, not the fog lights. If your Spyder is 2019 or newer, you will only have DRL: tricledusa.com/products/dual-color-foglight-rings-white-amber-2015-2018-only

• 
  @terrydavenport5542 Жыл бұрын

  @@chill62751 Thanks so much for all your help...!!

• 
  @josifish4 Жыл бұрын

  Don't make a video where Noone can see what the hell you are doing. This gun can be put together incorrectly many ways, but only correct one way. Please don't do ameture crap like this you will get someone hurt

• 
  @chill62751 Жыл бұрын

  Well, I am an amateur. However, I tried to show how to disassemble my shotgun. It comes with a manual. Viewers who have this shotgun can always go by it and not watch my content, and so can you. Most of these AR-12 shotguns disassemble the same way. Using the 2 wrenches was probably the only major difference. Thank you for your comments.

• 
  @spacemankills2632 Жыл бұрын

  Is there a disadvantage of tightening up the barrel shroud very tight by hand did it do anything to the function of the gun

• 
  @chill62751 Жыл бұрын

  No disadvantage. Does not change the function of the shotgun.

• 
  @spacemankills2632 Жыл бұрын

  @@chill62751 Thanks brother

• 
  @levinivison1024 Жыл бұрын

  That is a Gen 4 not a Gen 2 AR-12. All Gen 4's have the recoil spring around the barrel. Gen 2 and 3 have the recoil spring underneath the barrel. The one you are showing is definitely a Gen 4 AR-12. The gas wrenches are a giveaway that it is a Gen 4 as well. Gen 3 and below did not need gas wrenches for disassembly.

• 
  @chill62751 Жыл бұрын

  I'm dropping a link to another video that does a breakdown. The guy says it's a Panzer AR-12 Pro Gen 2. A different video says the Gen 4 has polymer lower. The Pro Gen 2 has aluminum upper and lower. kzread.info/dash/bejne/lqWqta-Qf8KzgLQ.html

• 
  @chill62751 Жыл бұрын

  This is the SKU I bought: LNG-AR12-PRO-12PS This is the description from Classic Firearms where I bought my AR-12: Note - This is the 2nd generation pro design of the AR-12 shotguns and is also being made by a different company in Turkey than the previous models. We are told by the importer that they have had some gas system improvements to make them even more reliable with a wide array of shells and charges. Any reviews as of 11/13/2017 associated with this ad will be referencing the previous generation of shotguns as well as any live fire videos you may see. The previous generation of these also had barrels threaded for and came supplied with choke tubes, however, these did not. As such the original video shows choke tubes but please know that these do not come with them.

• 
  @DamageLLC Жыл бұрын

  You had me at “Silver…”, so I went ahead and bought one 😬 Sincerely, New Yorker RV’ing through Kentucky

• 
  @JessicaSimonson1976 Жыл бұрын

  You know cheek riser can go forward to help with proper placement when shouldered ....placing cheek to far backwards means your often in wrong stance you should always lead with opposite leg of strong hand and lean into it. A weak position leads to jams much like limp writing a pistol.

• 
  @khadijahdavis1572 Жыл бұрын

  That looks awesome

• 
  @chill62751 Жыл бұрын

  Thank you

• 
  @kortgreen7725 Жыл бұрын

  I read a comment lately that said that the safety would not function properly on their AR 12. I KNOW EXACLY WHY! IF THE HAMMER IS STILL AGAINST THE BOLT, AND NOT IN THE FIRE POSITION, THE SAFETY WILL NOT GO ALL THE WAY TO THE WHITE DOT ON SAFE. IT'LL LET YOU KNOW THAT THE HAMMER IS NOT COCKED, BY THE SAFETY LEVER BEING LOWER THAN NORMAL IN THE SAFE POSITION SLIGHTLY LOWER THAN ON SAFE. IF YOU TRY TO FORCE IT INTO SAFETY, WITH THE HAMMER DROPPED, IT WILL SHEAR THE SAFETY AND YOU WILL HAVE ISSUES WITH THE GUN FIRING WHEN YOU RELEASE THE TRIGGER OR NOT HOLDING THE HAMMER IN THE FIRING POSITION. JUSS A LIL FYI FROM A SON OF A GUNSMITH!

• 
  @chill62751 Жыл бұрын

  Thanks for the info! So far we've had no issues with the AR-12.

• 
  @kortgreen7725 Жыл бұрын

  @@chill62751 yeah, some are fine with no problems, but mine would not properly feed 3 inch magnum shells. 2-3/4 work fine. I took mine apart and found burs and rough spots on the bolt carrier as well in the feed ramp at the top of the chamber. It cycles way better since I smoothed those out. Im even having trouble with the 10 round mags feeding rounds into the chamber properly. The problem is that the second shell moves forward in the mag, when the gun is fired. That second shell jams alla time cause it's outta place and won't feed..... I'm gonna solve that problem by inserting a piece of UHMW nylon block in front of the shells to keep the shells against the back of the mag. That should solve any issues with the 10 rd mags. I'll update and let you know if it works or not. But I know it will. I learned about guns from the best gunsmith I know. My DAD! PEACE OUT!

• 
  @RudeRaptor Жыл бұрын

  Thanks man for this tutorial .

• 
  @correctednews14632 жыл бұрын

  Removing the barrel is extremely bad advice. My new Panzer manual warns against this because the gun must then be returned to Panzer to properly torque the barrel nut.

• 
  @jubjon2 жыл бұрын

  huh????????

• 
  @Diplorable Жыл бұрын

  ​@@jubjonthat's what I said, that guy is making BS up it's getting awful deep in here!

• 
  @casualcruelty2 жыл бұрын

  How is the screen? Does it look sturdy? Wondering if it will crack like the earlier models.

• 
  @chill627512 жыл бұрын

  As thin as the laptop is I wouldn't drop it. However, I think it's sturdy enough. Remember it's not built for rugged use.

• 
  @casualcruelty2 жыл бұрын

  @@chill62751 Thank you for the response. The burgundy colour is just stunning!

• 
  @SgtJamesRay2 жыл бұрын

  I'm not seeing so many drones from you anymore. I hope all those additions to your gun collection aren't being used to shoot them down. Lol

• 
  @chill627512 жыл бұрын

  I know. I just don't get a chance to get out to fly.

• 
  @mdj3002 жыл бұрын

  I'm sure I'll be referring to this video in the near future. Thanks

• 
  @thebridge14742 жыл бұрын

  There is a big difference between the Gen 3 and Gen 4 Panzer AR-12. When you were working with the gas rings (those two small semi-rings), you video did not show how they are either disassembled and reassembled. Can you please show more or direct me to a place where I can learn how they fit on the shotgun. Mine fell out. Thank you

• 
  @NickRoss2 жыл бұрын

  Subscribed! Great Review!

• 
  @phillippugh21612 жыл бұрын

  Great detailed video the 360 pro should last you a while 👍😊

• 
  @Rifleman-bb7vr2 жыл бұрын

  Very good informative video. Very helpful for my first break down of this rifle. Thank you

• 
  @aspenin2 жыл бұрын

  Thanks for the video!

• 
  @BlakWiseCracker2 жыл бұрын

  This is how I want to train my wife. To protect herself and me in case I get injured 🤕 trying to protect us. ⭐️⭐️⭐️⭐️⭐️

• 
  @BlakWiseCracker2 жыл бұрын

  Great video! Can you tell me if the case came with your Silver Eagle. Thanks

• 
  @chill627512 жыл бұрын

  Yes the case came with it. Thanks for watching.

• 
  @BlakWiseCracker2 жыл бұрын

  @@chill62751 I appreciate your quick reply and thanks to you I just ordered me a Silver Eagle. I enjoyed the video and God bless you and yours. Thanks 🙏🏾

• 
  @keithchorley25112 жыл бұрын

  Nice machine, you need to swap your front wheels left to right. Tyres have a directional tread and are rotating the wrong way. 🕷🙃🕷

• 
  @chill627512 жыл бұрын

  Thank you. The tire issue was fixed during the first service.

• 
  @juanvaldez54222 жыл бұрын

  What mags it take?

• 
  @chill627512 жыл бұрын

  I bought a couple magazines from TR Imports. I believe it will work with Panzer magazines.

• 
  @todddhel2 жыл бұрын

  You like this better the the silver eagle?

• 
  @chill627512 жыл бұрын

  What I about Tac Pro is it has an adjustable stock the Panzer does not. The lower receiver is almost the same. The Tac Pro disassembles easier . The Panzer is my wife's.

• 
  @todddhel2 жыл бұрын

  @@chill62751 sweet

• 
  @todddhel2 жыл бұрын

  I was going to buy this gun tomorrow how has the reliability been with it so far and have you had any issues. I'm town between this one and the se112 from tr imports.

• 
  @chill627512 жыл бұрын

  It cycles better with high velocity shells. I would say 1350 and higher. Black Aces Tactical are good. I have used Sterling brand and they are OK. The only real issue I had was the charging handle broke. TR Imports sent me a new one. What people have to remember is shotguns shells weren't designed for magazines.

• 
  @todddhel2 жыл бұрын

  @@chill62751 thanks for the info

• 
  @todddhel2 жыл бұрын

  @@chill62751 how is the recoil? Awesome video by the way.

• 
  @chill627512 жыл бұрын

  @@todddhel it depends on the shells used. The Black Aces Tactical shells produce a lot of recoil but manageable. Lower powered shells have less recoil but you may experience more failures to eject.

• 
  @todddhel2 жыл бұрын

  How has the reliability been with the tacpro I'm torn between this one and the silver eagle se122

• 
  @marksc19292 жыл бұрын

  Nice collection "...I like and own Springfield as well ...so no 10mm for you ?

• 
  @chill627512 жыл бұрын

  Not yet but I did add to my collection

• 
  @sfm0792 жыл бұрын

  Just picked mine up today and my stock is fully extended and will not retract. The lever to adjust the stock seems like it's missing a spring or something.

• 
  @chill627512 жыл бұрын

  You can contact TR Imports they may be able to send you the part

• 
  @ggreene47622 жыл бұрын

  Did you have a pin in a small zip lock bag? If so, press it into the release mechanism...you'll see a small hole. This will cause the spring to engage...and then you can adjust it..

• 
  @eugeneporter7472 жыл бұрын

  There's a pen in a bag put the pin in the hole on the stock and it is adjustable

• 
  @masonwebb6112 жыл бұрын

  They can’t actually sell it as a adjustable stock has to come as a butt stuck and then you put this pin it to make it adjustable

• 
  @chill627512 жыл бұрын

  @@masonwebb611 the stock on my shotgun was adjustable when I received it.

• 
  @richardmurray62402 жыл бұрын

  How do you adjust the stock I have the same model not sure how to shorten the stock some

• 
  @2015gtbass2 жыл бұрын

  I got the same one, but has shot it yet. Has she shot it yet, if so which she'll do yall us for it. I know the manual call for high bass shells.

• 
  @chill627512 жыл бұрын

  We used Black Aces Tactical 00Buck. It shot very well. These AR-12s like high brass. You get more jams with anything under 1350 fps