Пікірлер

• 
  @orlinrivera15086 күн бұрын

  I got a 1000 grit sandpaper can it work?

• 
  @alchemista218 күн бұрын

  maui charges $75 + shipping fees (was $90 + tax for me) which comes with 2 lens replacements, cleaning, adjustment. Think it would be worth paying the $60 more for authentic Maui Jim service compared to these?

• 
  @TheKnowledgeNexus120 күн бұрын

  Many like to criticize but this is a GREAT video for anyone who wants to do automotive painting for the first time without spending a bundle. I came across a ton of webpages saying, no, you need to remove the entire bumper, sand everything, paint everything, etc. I followed what this guy did and for $25 in primer, paint, and sandpaper have a job that looks really nice (instead of $1000 at a body shop). I just used newspaper around the next panel and taped up the lights. Just be really conservative with the spray and use multiple light coats to help avoid runs. I also used 400 grit sandpaper instead. Great video.

• 
  @ShazammtheProducer21 күн бұрын

  lol

• 
  @AshleyKrivis-js9pj24 күн бұрын

  What kind of pad did you use? I know foam but polishing, buffing, light sanding?

• 
  @MalcombMedia1Ай бұрын

  Good Job

• 
  @bryanlara6947Ай бұрын

  No other ramp works for a mustang except this one😭

• 
  @Benji-ky2or2 ай бұрын

  Just bought a silver surfer statue for pretty cheap just has a big crack this video is going to help a lot

• 
  @mustangpaul052 ай бұрын

  Thank you! Silver might be tricky to match but this is a cheap enough fix to try

• 
  @spazzfreeman51773 ай бұрын

  I’m having a problem with my mercury

• 
  @mustangpaul052 ай бұрын

  Probably gonna need a new transmission :(

• 
  @lekhasasidharan66614 ай бұрын

  No good

• 
  @dariusstack4 ай бұрын

  Should remove that dent out first still good job n video tho 💪🏽💪🏽💪🏽💪🏽

• 
  @mustangpaul052 ай бұрын

  Thanks 💯

• 
  @Castro624 ай бұрын

  Maybe on shirts on a hanger but those cargos were just too chewed up 🫤

• 
  @mustangpaul052 ай бұрын

  Lol

• 
  @richardbess23104 ай бұрын

  this is hard to watch. they tell you how to use it and then you go and spray on twice as much as they say and then say oh it's streaking

• 
  @TheModAddict6 ай бұрын

  Aje designed it so that it wouldnt have to be adjusted. There was a lot of thought behind this design from the install, to the modular setup whete you can just change the motor mounts for your setup. It really is a Lifetime K Member.

• 
  @infernomaster27026 ай бұрын

  perfect ramps for those mustangs, challengers, chargers and camaro's. I need to get me a pair of these for the Camaro

• 
  @asmongoldsmouth98397 ай бұрын

  *It's called indexing. I would imagine an assembly line wouldn't index all the springs perfectly to OEM spec.*

• 
  @luciatheron16218 ай бұрын

  Hang up cloths then stream up. Steam will settle the creases but use gravity.

• 
  @user-mn1mv8ke8g9 ай бұрын

  This was incredibly helpful fixing a favorite pumpkin that I thought was unfixable. With your video, I fixed it so beautifully, you can't even see where it was broken. Thank you!

• 
  @mustangpaul058 ай бұрын

  Thank you :) that means a lot to get some nice feedback

• 
  @oneeyedjack852510 ай бұрын

  Always check the fluid first. If it's low, or dark it needs changed. If it has 150000 or more it could be more serious and the Lucas won't help at all

• 
  @mustangpaul0510 ай бұрын

  Yea this is a sealed transmission. So that was harder to figure out. But good suggestion.

• 
  @Trying-to-go-fast10 ай бұрын

  I just watched this, video. Yea there is a spacer that comes with those A arms that you are supposed to use if you use the SN95 spindles. This isnt an AJE issue, this was a user install issue.

• 
  @CostantineYoussif Жыл бұрын

  I just bought the same set like yours! Question do they get easily tarnish ? Do you ever shower with them? should i be worry if i wear them 24/7 ? Should i avoid wear em’ on the beach or pool ? How do you maintain them? Thanks

• 
  @mustangpaul052 ай бұрын

  I take them off. It tarnishes a little but I don’t notice it till I shine it again

• 
  @verohandymike Жыл бұрын

  If you had taped off the lights and used some putty on the rough spots, you would have got as close to perfect a repair as possible with a spray can. You'd have got double points for removing those couple light fixtures instead of taping.

• 
  @chuck7879 Жыл бұрын

  I have the Beat Flex and its just a bit different than these. Instead of this slip-in type of connection, they had a snap-on connector. However, it was still the exact same issue as this guy. When I pulled the wires away from the board, the connector became completely detached. So, I carefully reattached it by lining it up and pressing it onto the board. I could feel it snap into place. After that, I tried the headset again, and lo and behold, it worked!!

• 
  @FreakensNL Жыл бұрын

  Anyone know the part number of the gt350 solenoids?

• 
  @Jlewis310 Жыл бұрын

  Love the peace and I am going to order it today ♥️

• 
  @NedimKuburas-lu7wq Жыл бұрын

  Where can I buy one of these?

• 
  @MoveOverMotors Жыл бұрын

  Have you come across any multiple setting switches? Ie: have the actuator open halfway, then full? The factory roush f150 has a knob that allows this same actuator to be opened 25/50/full. Thanks

• 
  @billsauer3164 Жыл бұрын

  TITLE NEEDS TO BE CHANGED TO "HOW TO FAIL AT FIXING BUMPER".. OR "HOW NOT TO PAINT YOUR BUMPER" DEFINITELY A "DO NOT RECOMMEND CHANNEL" BUTTON PRESS FOR ME

• 
  @mustangpaul05 Жыл бұрын

  Thanks man. Pure beater truck.

• 
  @basilbarnaby2145 Жыл бұрын

  Quick struts are very good struts to use and a next thing the new spring will ride a bit different for awhile cause it's new ,it has to get time to work in,can't compare the new with the original that come with the vehicle with the new that just replaced

• 
  @JediBob609 Жыл бұрын

  1. Always tape off areas you don't want paint on. Don't care what the situation is. There is zero reason to be sloppy. 2. Sand the surface down. Depending in how deep the scratches are you may need Bondo. 3. Use alcohol to wipe down the surface and clean it. Then use a microfiber towel and get any remaining dust off. 4. TAPE OFF THE AREA YOU ARE WORKING IN TO AVOID OVERSPRAY. 5. Spray a decent amount of primer down. Let dry. 5. Wet sand with high grit sandpaper. 6. Dry off and clean surface again. 7. Spray base color and get a decent layer on one at a time. For the love of God don't do what this guy did. Everytime I see runs from a can on a car I cry. You should not be spraying that close with that can. 8. Once your entire base coat step is complete, Spray over with 2K gloss clear and hardener. It's in one can. Failure to do this will result in your paint peeling off and away and not being protected. Now you know.

• 
  @mustangpaul05 Жыл бұрын

  Sure man. But this is my get around vehicle. After this I smashed the same Corner lol. Wanna come do a video fixing it with me??

• 
  @TheHelp90899 Жыл бұрын

  Which clear coat and hardening do you recommend?

• 
  @JediBob609 Жыл бұрын

  @@mustangpaul05 depends how far I have to drive 🤣

• 
  @ErikisOfficial6 ай бұрын

  ​@KeatonHenke why don't you make your own channel and show everyone how it's done rather than critiquing other people in the comments. Nothing but an "Ego" exercise. Now all of a sudden you feel superior huh? At least in your own mind

• 
  @charredskeleton Жыл бұрын

  For a work beater if it looks good from across the street it’s good enough.

• 
  @mustangpaul05 Жыл бұрын

  Thank you!! My point exactly.

• 
  @bradleyhartsough9843 Жыл бұрын

  @@mustangpaul05 .😊

• 
  @teresamcdaniel9431 Жыл бұрын

  What wattage is it 1/4 or 1/2

• 
  @mustangpaul05 Жыл бұрын

  Wattage?? You mean the Amps for the resistor? Sorry I’m not getting it

• 
  @teresamcdaniel9431 Жыл бұрын

  @@mustangpaul05 yes I don't know which one to get 1/4 or 1/2 2.2 ohms

• 
  @mustangpaul05 Жыл бұрын

  @@teresamcdaniel9431 it does day 1/2 watts. Is that what you need??

• 
  @teresamcdaniel9431 Жыл бұрын

  @@mustangpaul05 thanks again for helping

• 
  @teresamcdaniel9431 Жыл бұрын

  @Starborne Life Hi I'm having a problem finding the the plug in omhs you used for your seats. I don't have electric seats but do have air bags. This is the only resistor I could find. They all look like a round thing with pointy needles on the ends

• 
  @blakeneef Жыл бұрын

  Why didn’t you just take the piece to Home Depot to get it color matched??

• 
  @mustangpaul05 Жыл бұрын

  Lol. That would be funny. The app works great!

• 
  @kaxtu Жыл бұрын

  There 100% reps there goods ones and there's no shame in wearing reps but just not ever sells them as legit here's how I know Reps have a Chinese stamp on the label and yours has that(before you say that it could be any pair no there will never be a Chinese stamp on any authentic Jordan) the insole sticking seems a little off I recommend you use a black light or even sneaker authentication services I recommend legit check.

• 
  @mustangpaul05 Жыл бұрын

  To be honest I know they’re reps. No way could they be real at 175 but I really like them and want to see what the Internet has to say. Thanks for a nice response.

• 
  @kaxtu Жыл бұрын

  @@mustangpaul05 cool man enjoy your shoes don’t let anyone get to you paying 10k+ for shoes is crazy and there practically the same as long as your happy that’s all that matter enjoys your kicks man 👍

• 
  @Sam-wh8ig Жыл бұрын

  inside take isnt supposed to say MIAMI, its supposed to have a number. also the lace colour is wrong, box label is wrong, dior logo print colour needs to have a purple tint colour not a light blue colour. the toe box is too thic, dior chinese tag things doesnt exist. its a bad fake and you will get called out if you wear them outside. you know very well yourself they are fake but if u wanna believe they are real, you do you. you can buy same quaility reps on wedian for $80 so you basically got scammed but if you like them then yeah

• 
  @mustangpaul05 Жыл бұрын

  It does have a number on one of the shoes..not just Miami on both. I’m happy to have a sneaker talk if someone wants to walk up to me and say something

• 
  @Sam-wh8ig Жыл бұрын

  @@mustangpaul05 bruh.. its not supposed to have Miami on any of the shoes. Both are supposed to have the number out of 8500

• 
  @mudmansomeyt1484 Жыл бұрын

  @@mustangpaul05 lowkey bro these are reps, a lot is off about this shoe, you can even tell based off the swoosh.

• 
  @hnilicka1922 Жыл бұрын

  there are literally china signs bro and you think it is legit

• 
  @mustangpaul05 Жыл бұрын

  Don’t they sell Dior in China?

• 
  @hnilicka1922 Жыл бұрын

  @@mustangpaul05 yes but fake dior

• 
  @marcosanvo7030 Жыл бұрын

  man these are reps 100%

• 
  @mustangpaul05 Жыл бұрын

  But how do you know??

• 
  @jgar_07 Жыл бұрын

  @@mustangpaul05 $10k shoes for $175 😂

• 
  @marcosanvo7030 Жыл бұрын

  @@mustangpaul05 because the tag its in chinese and it should be in english. u got the dior 冰淇淋 1s

• 
  @acemaddox123gamingandother8 Жыл бұрын

  you bought reps

• 
  @mustangpaul05 Жыл бұрын

  You sure??

• 
  @markmitchezee2728 Жыл бұрын

  Wait a minute ... What ? You didn't bother to take the ( 5 ) extra seconds to put ( 5 cents ) worth of masking tape over that light ? What an Idiot !

• 
  @mustangpaul05 Жыл бұрын

  Lols no. Bro this is my daily junker. U mad??

• 
  @lonelion8341 Жыл бұрын

  This helped a lot. Thanks Bro

• 
  @mustangpaul05 Жыл бұрын

  You got it. Definitely worth the buy

• 
  @carolina45south Жыл бұрын

  Cheers dude…appreciate the knowledge💯

• 
  @mustangpaul05 Жыл бұрын

  Thank you!

• 
  @DavidFilipi Жыл бұрын

  Does the Corbeau brackets and seat lower the sitting position compared to stock bucket seats? I have a "tall driver with a helmet" problem with the bucket seats.

• 
  @91326 Жыл бұрын

  Zero expectations, zero disappointments

• 
  @mustangpaul05 Жыл бұрын

  Hey. It’s quick and easy and an improvement.

• 
  @tanjumansp9591 Жыл бұрын

  I lost tht brush attachment. Do i get it anywhere? I wanna buy tht part?

• 
  @mustangpaul05 Жыл бұрын

  No clue sorry

• 
  @D33P_4K Жыл бұрын

  Very informative video… love that you go into detail to explain everything

• 
  @mustangpaul05 Жыл бұрын

  Thank you I appreciate the feedback

• 
  @CRM537 Жыл бұрын

  lol tape the lights....

• 
  @mustangpaul05 Жыл бұрын

  Lol

• 
  @CRM537 Жыл бұрын

  @@mustangpaul05 crap job bro... man with the leaks

• 
  @vipnetworker Жыл бұрын

  What type of glue did you use at the end? Thanks 🙏

• 
  @mustangpaul05 Жыл бұрын

  Just like super glue. Nothing fancy.

• 
  @rogerrabbito4517 Жыл бұрын

  What a pain in the arsole... welp.... NOPE ...so much for the racing seats... - thx for your great video, however - much appreciated.

• 
  @mustangpaul05 Жыл бұрын

  Glad I can help. I think stock recaro seats are the way to go

• 
  @olusegunmichealolayemi3332 Жыл бұрын

  I have similar problem but the speed sensors I recently installed were on the two front wheels... Could this be the culprit 😕

• 
  @mustangpaul05 Жыл бұрын

  Nah it was the trans. I had it replaced eventually. Thanks for the idea tho.

• 
  @livethelawofone272 жыл бұрын

  Thank you for the video! Love your conversational style. You made me laugh 😁🤣😁🤣😁🤣

• 
  @mustangpaul05 Жыл бұрын

  Lol thank you!!