If you like any of the following robots, music, cheese, cats, swimming, building stuff, breaking stuff or goofing around you will probably find my KZread channel amusing. I am just trying to have some fun and share some information. Hope you will enjoy.
Пікірлер
I have a black and decker automatic coffee maker. I found this exact thing in our coffee maker this morning! I rinsed it out really good, brewed hot water through it and in the reusable filter was eggs and what appears to be queens? I am so disgusted. I’m running water through it again right now. If I get more eggs and ants in the filter, I’m throwing the whole thing away. I have never seen anything like this before. Thanks for the video. I was hoping that someone else had a similar experience.
That’s an excellent idea of putting the name brilliant lol thanks so much!
I haven’t staked a blow mode down before this is why I’m watching this video. I’m afraid to use rebar because I’m afraid it might bust the light inside if it gets blown around by the wind.
Bought one today, worked for about an hour. Was using gently and it just stopped. Garbage junk ass crap. Do not buy
Lol... if you remove the whatchamacallit and reverse the doohickey that thingamajig will start working!
Thank you the directions doesn't explain some things very well highly appreciate the video!
Glad it helped!
@@jasonsanders8014 it did but I had to return it dang thing went put on me like that day I guess it didn't like the cord I had it plugged into just blew up lol
Just happened to us with my Ninja Dual brewer. We have spotless counters, ant traps on the backsplash and floor near the outside door, and nothing out for them to even be interested in but they keep showing up!! I brew a ton of hot water and vinegar and they just come back. Now I have to tear it apart because I came here to see where they could be coming from! Thank you for sharing your experience because now I have a clue what to look at next. My coffee maker is currently living outside until I can take a screwdriver to it. Gross!
Txv problem
REVISITING - we took our snare apart, and VERY PISSED AT SIMMONS. (not you, the content creator)\ *********DO NOT BUY SIMMONS DRUMS*********************************** SIMMONS made these things with PLANNED OBSOLESCENCE in mind. THEY ARE HORRIBLE. At 4:27 in the video, you can see the little foam cone on top to receive the center stroke on the snare. (as opposed to the rim shot). THAT LITTLE CONE and it's PIEZO are held up by two plastic standoffs with a screw in it. (SCREWS VISIBLE AT 5:29) THOSE PLASTIC STANDOFFS ARE MADE LIKE SHIT. THEY ARE TINY. THEY ARE THIN. THEY ARE BRUTALLY BRITTLE AFTER A FEW MONTHS - AND YOU ARE HITTING THEM WITH A STICK. Simmons should be ashamed. NO WAY did they do this UNINTENTIONALLY. YOU CANNOT REPLACE THE STANDOFF - IT'S PART OF THE BASE OF THE DRUM IT'S BULLSHIT. A $.05 DIFFERENCE IN MANUFACTURING - AGAINST THE CONSUMER - FOR PLANNED OBSOLESCENCE.
Thanks
Welcome
Making fun of Dr. Reeds real footage?? 🤦♂️ dude come on bro you are insulting the people who know we are not the only species in the Galaxy or the only dimension. This dude must work for the gov..
What's that thing you guys were holding? Seems like the fish like it
It was a metal mesh with some fish food in it the company did it not exactly sure what was in it.
You didn't show how to wire the switch and you didn't have the camera on the switch when you were referencing. something on the switch.
I have a similar ninja, the cm300. Have had it for over a year and no problems. Havent used it in 5 days and went to go add water and there was like 50 floating in the reservoir. Then lifted the machine up to find like hundreds underneath. Cleaned everything up killed all the ants. Rinsed out the machine as best i could. Currently running white vinegar thru it and after water. Definitely dont want to get rid of the machine. Your ants dont look like little sugar ants though. I heard those would be attracted to the water and warmth and possible food source nearby.
It's difficult to hear you with the unit running
Hey, do you think you could leave a link to the correct sensor for all of us? This was a really sweet video - a link to the correct sensor would be super helpful. Thanks again !
Sure this is what I used a.co/d/dFSYkKc
@@jasonsanders8014 thanks, almost forgot to give you the "like". sweet video. I'm sure I'll be repairing all my own drum pads now that you've shown this. Takes a lot of stress out of buying electronics that are intended for punishment.
so I feel like this is my issue but the video is not very clearly explained. so I am confused
What you said is true for any 3way switch not just smart switches, this was of no help to me. Thanks for trying
There is an additive for the refrigerant called Subco 88 that will lubricate the reversing valve. Old school hvac technicians will know what it is. If your valve is still sticking you can add that to keep it running smoothly. It works with most refrigerant types.
Thanks for the info, I appreciate that
Cool :) I miss yard work !
How to use the dimmer feature for led lights
I found that to be an issue. The problem is some switches still send out small amounts of electricity that will be enough to keep an led fully lit. You basically need to get switches that can dim led.
Do you have any problems with connectivity on the M1?
I did but I found it was having garbage cables. I would replace them if they started acting up. Now it’s all good. It took a while to figure it out because i kept thinking it was my devices. And the cables sometimes work fine even on other stuff.
Ants and other insects like to nest where there's heat. Laptops and game consoles are a big one too. Those ants might've used coffee as dirt.
Не става ясно приятел точно какво правиш.
You are right....way too scary for me.
This guy cant explain correctly
Yeah but the wind blows the blowmold 360 on the stake
I will look in to that. I have a few ideas. I usually don’t mind if it doesn’t blow away but I think we can do better
You can put string behind mold and tie both together with rope or wire
Thank you, your video help me. You explanations was very clear.🎉
promo sm 💔
😂😂😂 Subscribed
Would be kool to control the mpc via the thermini
Did you see at the very end I got it to work with a new update
Are you still building the robot?
Yes I will make an update shortly. I have had some busy weeks.
Did you ever find out if it was the reversing valve or the solenoid that went bad?
Not yet it’s still running. I think it’s the reversing valve.
Goodjob
Thanks
That’s absolutely awesome 💯 🎶
Thanks for the compliment. Also thanks for the audio help I would not have finished without your advice.
Chainsaw Remix!!!
Yes sir just for you
Happy birthday 🎉
Thanks! Hope your doing well.
Very, very helpful
Thanks
Dude what band tee is that?? I swear I’ve seen it before
sorry it was a gift. It doesn't have any band names on it. i tried looking for it in a store but no success.
Can you provide a picture of how you ended up wiring the switch in your box?
I ended up taking a joystick of a joycon apart and broke two of the metal tap things that bends over the top. I cleaned it out and even managed to put it back together. it worked for a while, but it eventually started drifting because the metal plating wasn't on as tight as it should because two of the metal tabs broke off. internal mechanisms are neat, tho so I have to replace it, yay.
Have you tried bending those connector feet a bit more to not get it to drift?
@@jpasw I can't, they broke, unless you talking about something else
HELPED ME A TON! THANKS
It's a reversing valve. If you have changed your thermostat you may not have it configured properly.
What size lens did you put in it?
ᎮᏒᎧᎷᎧᏕᎷ 🍀
oh wow, look at this studio!
Thanks it been a few years in the making.
@@jasonsanders8014 these are the best kinds! The gear I've had the longest, is the gear I understand best.
Hey I saw you have a mg1 I do too what did you do to it? It looks like it has mods?
@@jasonsanders8014 it is stock, except that the RCA jacks were replaced with 1/4. I picked up a used Arturia keystep, and it sends S-trigger cv-gate to the Realistic with a step sequence, clocked to the DR110. I also spice it up a little with a (contemporary) EHX op-amp big muff.
The rest is in my hands!
Lol still got my old MPD16 too. It was a waste of money for me. Vista used to give a blue screen when I plugged it in everytime, same sams with 7. Could've easily got a midi to USB thing, but nah couldn't be bothered any further.
I really just like it for the pitch bend fader. I wish my mpc live had a pitch fader like the mpc 1000. Your right I did feel I was fighting with it until I got windows 8.
I enjoy seeing videos from you, Jason! Please keep uploading when you can.
Wanted to leave a comment and say that your method totally fixed my issue. Thanks again for posting this!
Thanks for watching. Glad to help.
When I added a 50L air assist to my k40 laser It turns on and off by itself, what is the SOLUTION please 🥺
Sounds like your install is causing a electrical short or drag chain is blocking the beam.
I am not getting a burn through the head. Any ideas?