Пікірлер

• 
  @josepeixoto09810 күн бұрын

  mine leaks at the bottom

• 
  @KevinGibney-yt1ec10 күн бұрын

  Ste this is the product I would like in the bathroom stud out then this jig frame work. then abacus elements boards take a look

• 
  @user-li7nx3bu5u13 күн бұрын

  Is it recommended that waterproof backing board is used on the walls of an en-suite shower room before wet wall boards are put on, or is the backing board only needed when the walls are getting tiled ? What is the difference between a wet room and a shower room ? Even though the shower room has a shower tray and a screen, and the water doesn’t actually flood the floor, the room will still be full of condensation. A bathroom installer told me that he would be fitting the wet wall panels to gip roc, and gip roc to me, sounds like normal paper and chalk plasterboard. Am I right in thinking that this sounds a wee bitty unprofessional ?

• 
  @alexandrasavtchenko196217 күн бұрын

  Thank you so much for all your work!!!!!!!

• 
  @jamesfurz740620 күн бұрын

  Its nice watching Roger work isn't it?

• 
  @tislam178624 күн бұрын

  Great ❤

• 
  @chrishollingsworth198025 күн бұрын

  Roger is this safe to stick to plasterboard or should you use plywood or something else.

• 
  @jimosmond2082Ай бұрын

  Thanks for nothing

• 
  @Rach3lllan3Ай бұрын

  Jeet and perry bealadcrums Rachel Lane JP495501B

• 
  @Rach3lllan3Ай бұрын

  MICK DANIELS WIDE VINE BOYSI'M TA RACHEL WHORE BRUK MANDIBULAR

• 
  @Rach3lllan3Ай бұрын

  Help the innocent instead of toe path tally go ho game PUSSY

• 
  @Ap01101969Ай бұрын

  Thanks for the great video. Does the manufacturer still exist? I bought this kit, but think it's defective (the adhesive doesn't go right across the tape), but the manufacturer is not responding to emails.

• 
  @chrisb58242 ай бұрын

  Hi - after about 10 years use one of the valves (on/off flow) ceased up. Tried getting a replacement but struggled to find an exact matching one... Found your video and tried flushing the part in timescale remover - wow! It worked a treat. Have it several washes in the remover and slowly eased it back and forth. Left it in the wash with the valve open, then shut, then half way, and worked it both ways between soaks. After several washes and wiping away the loosened timescale the valve is now back in and working as good as new. Thanks for the video - saved us loads of hassle... 👍

• 
  @grahamsmith81222 ай бұрын

  Why no elements board first? Bit contradictory?

• 
  @raduherciu20783 ай бұрын

  If i fixed the pipe for the shower head on b i can do anything to don't brake the tiles, because is not working

• 
  @Sirricardo63 ай бұрын

  What connectors are used to join to the copper pipe (0:33)? They look like solder fittings? If they are, how are they soldered with the fittings in place?

• 
  @Sirricardo63 ай бұрын

  No Leaks as long as the o'ring doesnt degrade. I think I would have preferred to have the trap solvent welded in perhaps?

• 
  @peterhall88073 ай бұрын

  hi, roger can you please recommend agood adhesive for hardie backer board and can you use foam adhesive to fix to 35mm insulated plasterboard is it better to screw it to the plaster board.( tile adhesive)

• 
  @opentrail3 ай бұрын

  Thanks Roger. The only thing I missed from the instructions for the 820mm was fitting the siphon cam bracket. Watching you, the penny dropped and I was able to complete the install. What you call the debris plate was actually a cover plate that must be an optional extra on the 820 because I did not have that. Always a pleasure watching you Roger!

• 
  @lukedunlin2023 ай бұрын

  Can you take the click lock off the bottom of the tray once it's clicked in ?

• 
  @UC6h-h7xIZPdaVBlAaY5hQIg3 ай бұрын

  Watched a loooot of your videos. Probably the first "influencer" that I trust. Just bought the Abacus boards for my DIY walk-in shower. Let's see how it goes

• 
  @SMEAGOLTRICKSYHOBBIT3 ай бұрын

  How much did you mix of that to clean the valve?

• 
  @raj0802883 ай бұрын

  Can you tank on top of the self adhesive waterproof tape or is it not necessary?

• 
  @AbacusManufacturingGroupLtd3 ай бұрын

  It's not necessary but the belt and braces approach will not hurt.

• 
  @d.c78634 ай бұрын

  Amazing video and very good information as always 😊👌will use this before tiling 👍

• 
  @d.c78634 ай бұрын

  Great video and information thank you 🙂👍

• 
  @mickwn93554 ай бұрын

  Got a rough wall consisting of backing plaster, old tile adhesive and finishing plaster. Want to over board it with this board. What would I prime the walls with first before using the adhesive to stick to board to the wall?

• 
  @das-das-dasboot79564 ай бұрын

  Love your kit guys; I just wish the website was more informative about which fitting plates marry up to the various elements sleeves. A compatibility graph will go a long way to helping trades.

• 
  @AbacusManufacturingGroupLtd3 ай бұрын

  Thanks for the feedback. We’ve put that to the technical team so watch this space!

• 
  @leetucker60164 ай бұрын

  Sorry did I miss it? Where’s the demonstration 😂

• 
  @Participant6165 ай бұрын

  Looks like that tiler had a bad time around the WC.

• 
  @julianj40265 ай бұрын

  Can you paint the boards or would they need to be plastered first?

• 
  @sonnyshap5 ай бұрын

  Hi Roger, I have a lot of plaster board dot and dub adhesive left over. Can I use this on this elements board or similar board to dot and dub to brick walls in the bathroom?

• 
  @aaassociation67515 ай бұрын

  I have been following you long time and wonder to demonstrate of the best sound insulation achievements board apply on party wall 100mm timber floor joists old house. I am sure you had a great experience awaiting your help.. Do we need eract new stud structure then apply the board and how many layer we need

• 
  @kingofthewestmidlands40496 ай бұрын

  I used it a couple of years ago and is still doing well. Ive also used it to seal the door membrane on my Porsche.

• 
  @freepress84516 ай бұрын

  Silicon tip was useful

• 
  @grahamshillingford82296 ай бұрын

  Its a good product except the surface laquer breaks down & peels. I've had it in my ensuite shower for 6 years & the laquer coating is peeling in quite a few places...

• 
  @Jackzuk7 ай бұрын

  Ive got one of these by crosswater, how do you connect it to a regular waste pipe??

• 
  @AbacusManufacturingGroupLtd7 ай бұрын

  Apologies if we have misread your question but it’s a 1 ¼” thread which then connects directly to a corresponding bottle trap. It’s the latter that then connects to your regular waste pipe. Hope that helps. Here’s our website link for tech detail and instruction download - www.abacus-bathrooms.co.uk/#!/taps-brassware/traps-wastes/basin-wastes/Universal-Click-Freeflow-Basin-Waste-Slotted-UnSlotted-Chrome.html

• 
  @Richard570727 ай бұрын

  Great video, it inspired me to buy the same system. I have to shorten the shower tray by 100mm, what do I do about the tile lines? Would you mark to the original corners first before cutting? Or draw lines to the new corners? Thanks

• 
  @AbacusManufacturingGroupLtd7 ай бұрын

  You would need to mark the original corners as this corresponds to the manufactured fall lines.

• 
  @tucays17 ай бұрын

  what if you have a concrete floor? what do you do?

• 
  @AbacusManufacturingGroupLtd7 ай бұрын

  Aside from the labour heavy option of chasing out for any pipework (taking into account falls etc) and tray it might be an idea to consider raised concept options. This is a tiled alternative to a legged acrylic tray alternative whereby the pipework can be run above floor level, so you get the modern tiled look of a wetroom without the more advanced construction requirements.

• 
  @gdfggggg8 ай бұрын

  I use something called a Classi-seal. Really easy to use.

• 
  @josephhalley64578 ай бұрын

  AVOID this product at all costs. I recently purchased Abacus elements board from rubberduck and it's been a complete nightmare. The box of 10 boards arrived damaged and it looks like a forklift fork has punctured through them. I inspected the boards and two boards have a hole through them with the subsequent boards having deflection and compression in this same area. I reported this to Rubber duck and after chasing with several phone calls they have advised that Abacus are going to send out two replacement boards, I requested the whole batch be collected and replaced but they have refused and advised that Abacus have advised the remaining boards are "within tolerance" I asked what there tolerance was so I could check myself, and again, after several calls chasing this they advised that there isn't a tolerance measurement it is that they are "fit for purpose" in their opinion which presumably they can tell from a photo. Just so dishonest. The damaged areas on the subsequent boards are compressed from 12mm to around 6mm and are really fragile, I could quite easily push my finger through the boards in the damaged area and they will not stand up to any usual building loads and will split as soon as I put a screw through it. I have told this to Rubber duck however they are now ghosting me. Just an awful, horrible company to deal with. If you want a full refund they demand that you send them the items using a courier at your expense, even if they are damaged, despite the law saying the return delivery should be covered by the seller for damaged products. The boards might be good, however if there is any damage in transit or any issues they will do everything they can to avoid replacing them or helping you. Genuinely my worst ever experience as a consumer has been with this company. Save yourself the hassle and go with another product or supplier.

• 
  @fgbraz9 ай бұрын

  Hi there, how to fix sagging / leaning down screens?

• 
  @user-nn6zh6es2c9 ай бұрын

  Brilliant idea I'm gonna try that idea myself

• 
  @dominikings40669 ай бұрын

  Hi I just need to know what kit this is you’ve bought

• 
  @ChristianBower-sz6qi9 ай бұрын

  Cant you use the wedi tape and corner pieces for this job ?

• 
  @karimasad20949 ай бұрын

  Thank you for your clear demonstration. I found it very helpful.

• 
  @9720miller9 ай бұрын

  I use these kits on every install now, never had an issue.

• 
  @vividcolourfilms127610 ай бұрын

  You are the Jason Statham of Plumbers :D

• 
  @seismic640210 ай бұрын

  I guess the concealed cisterns are designed to be maintenance free for a number of years. For most people on a budget, a three piece suite will still be the way. If you have a shower over bath situation and you open the window while showering and squeegee and wipe the tiles / bath, the grout and silicone will last a long time. No water will go near the elements board for a long time, although I agree that this is the appropriate way to do it.

• 
  @Goodpeace310 ай бұрын

  Thank you!

• 
  @nargisbibi136710 ай бұрын

  Do you need to put primer on wedi type boards or cement boards before you tile