Clear explanation and easy to do, but unfortunately it is not working at all with my servo!!! I experimented with other combinations, but none of them are working! Or it's not working with your project or with moving other wires it's turning around like crazy.
@CAkavskaTvKvarner6 күн бұрын
Simple is more! 😊
@skunkworks9635Ай бұрын
Bro . After I seen your video . I made a sick . F-16 powered recovery boat. Gets my sonic wake 3’ no issues
@ewaldstander766Ай бұрын
I got a second hand one the other day and its awesome. Its just so hard to find after sales service. Most parts are easy to find, but try and find a rear hub with a keyway...
@SLIDEORDIE007FN2 ай бұрын
Ok hear me out m550i with body shell removed 🚀🚀
@Snuggz2822 ай бұрын
Kewl thank for the video mate 👍 was hoping to see in action before my son gets 1, Might have to get myself 1 as well 🤔 😂
@user-hm6sd7kt8l2 ай бұрын
Cool
@carboncubss2 ай бұрын
How did it slope? Id say fairly good in nice winds. I have several with that wing structure and they all slope very well. Never DLG any of them.
@my_dear_friend_3 ай бұрын
3:03 What is the left stick controlling here?
@barrelracer3183 ай бұрын
Small FYI for anyone watching this more recently. The small wire he used to complete the circuit and join the cells together may not be enough to hand the current between cells. A larger wire may be necessary.
@michaelwhinnery1643 ай бұрын
If I could give 2 thumbs up I would. I've given up on 3d printed planes... they are just to heavy and fragile.
@michaelwhinnery1643 ай бұрын
Are you actually flying on 2 sticks or was that just some b roll footage edited in ?
@Lopez_rc3 ай бұрын
He’s flying mode 1
@busybody14745 ай бұрын
Way too noisy 👎
@axelsmith2095 ай бұрын
Hello, I loved your plane and I was wanting to try to recreate it. Is there any chance you know how long and the thickness of the carbon rod on the back and how long the plane is in general? Thanks a lot 😄
@lucaspilati70205 ай бұрын
Nice Job, Bro! How much does it weight?
@ajsworldruledbycats23296 ай бұрын
Do you think the store can send it to the U.S?
@alainbellemare21686 ай бұрын
make your engine point downward a little bit
@adamkelley89966 ай бұрын
awsome job bro
@andrewk60087 ай бұрын
This was just what I needed. Removed a bad cell and hood as new. Liked and subbed.
@hendogga89278 ай бұрын
Had one of these karts in the shed that I revived. Put a new motor on with torque converter, rips now, pulls wheelies and hit 75km/h. Now I’ve got a complete suspension build on the way and a second motor swap planned.
@tugboat84758 ай бұрын
Nice video. I was only in Paramount Browns yesterday and I noticed they had garden blowers for $129 their own brand. They looked really good. My old Pope is starting to drip oil everywhere. Was going to go to Bunnings but this one looks really good
@WhatDadIsUpTo8 ай бұрын
I build and fly pod & boom as well, but I run the stab wire THROUGH the boom to a horn on the back of the empinage. Works very well and less to snag on brush if I land without catching. I don't build DLG, though. I do soaring in thermals and launch with just a toss into an updraft, which you learn how to recognize by watching wind acting on grass. You can easily build in camber using slabs of laminated sheet foam carved into shape using an undercambered wing rib as a pattern -- just sand and check often. Easy, really.
@bobeden50278 ай бұрын
I have a LI Chengfeng tank. what are the blue peleets for, and how do I get the exhaust to smoke?
@modelflight53728 ай бұрын
Brilliant! Well done Corin!
@lmadelaide52608 ай бұрын
So COOL Keep up the GREAT work!!
@kilianyoung55478 ай бұрын
Man i remember that car
@magnusladd8 ай бұрын
the capacitive sensing is such an awesome touch hell yeah man
@magnusladd8 ай бұрын
dude this is so epic!
@jamiewise79808 ай бұрын
That was EPIC. Nailed it!
@patrickhickman44848 ай бұрын
That looks awesome! Hope you do well
@c-los46309 ай бұрын
Great video, can you tell me if it has a live axle ?
@HarrisonPocockRacing11 ай бұрын
they are really fun to ride but they suck to turn no weight on it i really want to get the front suspension swap from helmet kart
@Dhouston1125 Жыл бұрын
impressive
@chrisstephenson6706 Жыл бұрын
Find a bigger pond..
@diantae Жыл бұрын
Great video the buggy looks like a beast. It looks bigger than 1/10 scale
@andrewpetrov7646 Жыл бұрын
very cool chassis kit
@user-dx1ji7cl2g Жыл бұрын
👍🤗✊ super
@BasBoyRC Жыл бұрын
Never heard of this chassis kit, in the UK only the raw and pro.
@dewabagus9676 Жыл бұрын
Top
@evanwest19295 ай бұрын
What the fuck is top
@Gabebuildsthings1234 Жыл бұрын
Thanks👍
@thomasvaughn1688 Жыл бұрын
An rc car that does donuts on gravel . Now that's new
@lucasmccarrell8325 Жыл бұрын
nice lj81 I have one myself unbeatable off-road and very good sounding
@Notavailable375 Жыл бұрын
Bit of oversteer mate?
@CORINKERSTEN Жыл бұрын
Yeah the older ones are better they turn sharper :) When you lean forward it drifts real good :) Thanks for watching!
@daggius Жыл бұрын
well done me lad
@gregsandy6560 Жыл бұрын
OK, The reason for the step on the floats ist the balancing point of the plane (Main Wing Spar). AT the planes neutral point, Balancing point the step kicks in and breaks surface tension of the water. Another words the weight is too far back on the floats for the ducted fan boat. Yes, it goes well but you missed the point of it. You can go faster. By getting the entire float out of the water you now have a hydroplane you will need a longer rudder. You will need a bigger pond.
@modelflight5372 Жыл бұрын
We love you Corin! Go Ultra RC!
@marsmal7442 Жыл бұрын
Danke !!!!!!!!
@dans2423 Жыл бұрын
It's so sad they discontinued this awesome truck!
@andrewpetrov7646 Жыл бұрын
Looks cool
@brandonlogan8472 Жыл бұрын
I put the mamba x esc as well. I put mambas crawler motor in. Don’t remember the name of it though. Same tires. Love myn.
Пікірлер
Clear explanation and easy to do, but unfortunately it is not working at all with my servo!!! I experimented with other combinations, but none of them are working! Or it's not working with your project or with moving other wires it's turning around like crazy.
Simple is more! 😊
Bro . After I seen your video . I made a sick . F-16 powered recovery boat. Gets my sonic wake 3’ no issues
I got a second hand one the other day and its awesome. Its just so hard to find after sales service. Most parts are easy to find, but try and find a rear hub with a keyway...
Ok hear me out m550i with body shell removed 🚀🚀
Kewl thank for the video mate 👍 was hoping to see in action before my son gets 1, Might have to get myself 1 as well 🤔 😂
Cool
How did it slope? Id say fairly good in nice winds. I have several with that wing structure and they all slope very well. Never DLG any of them.
3:03 What is the left stick controlling here?
Small FYI for anyone watching this more recently. The small wire he used to complete the circuit and join the cells together may not be enough to hand the current between cells. A larger wire may be necessary.
If I could give 2 thumbs up I would. I've given up on 3d printed planes... they are just to heavy and fragile.
Are you actually flying on 2 sticks or was that just some b roll footage edited in ?
He’s flying mode 1
Way too noisy 👎
Hello, I loved your plane and I was wanting to try to recreate it. Is there any chance you know how long and the thickness of the carbon rod on the back and how long the plane is in general? Thanks a lot 😄
Nice Job, Bro! How much does it weight?
Do you think the store can send it to the U.S?
make your engine point downward a little bit
awsome job bro
This was just what I needed. Removed a bad cell and hood as new. Liked and subbed.
Had one of these karts in the shed that I revived. Put a new motor on with torque converter, rips now, pulls wheelies and hit 75km/h. Now I’ve got a complete suspension build on the way and a second motor swap planned.
Nice video. I was only in Paramount Browns yesterday and I noticed they had garden blowers for $129 their own brand. They looked really good. My old Pope is starting to drip oil everywhere. Was going to go to Bunnings but this one looks really good
I build and fly pod & boom as well, but I run the stab wire THROUGH the boom to a horn on the back of the empinage. Works very well and less to snag on brush if I land without catching. I don't build DLG, though. I do soaring in thermals and launch with just a toss into an updraft, which you learn how to recognize by watching wind acting on grass. You can easily build in camber using slabs of laminated sheet foam carved into shape using an undercambered wing rib as a pattern -- just sand and check often. Easy, really.
I have a LI Chengfeng tank. what are the blue peleets for, and how do I get the exhaust to smoke?
Brilliant! Well done Corin!
So COOL Keep up the GREAT work!!
Man i remember that car
the capacitive sensing is such an awesome touch hell yeah man
dude this is so epic!
That was EPIC. Nailed it!
That looks awesome! Hope you do well
Great video, can you tell me if it has a live axle ?
they are really fun to ride but they suck to turn no weight on it i really want to get the front suspension swap from helmet kart
impressive
Find a bigger pond..
Great video the buggy looks like a beast. It looks bigger than 1/10 scale
very cool chassis kit
👍🤗✊ super
Never heard of this chassis kit, in the UK only the raw and pro.
Top
What the fuck is top
Thanks👍
An rc car that does donuts on gravel . Now that's new
nice lj81 I have one myself unbeatable off-road and very good sounding
Bit of oversteer mate?
Yeah the older ones are better they turn sharper :) When you lean forward it drifts real good :) Thanks for watching!
well done me lad
OK, The reason for the step on the floats ist the balancing point of the plane (Main Wing Spar). AT the planes neutral point, Balancing point the step kicks in and breaks surface tension of the water. Another words the weight is too far back on the floats for the ducted fan boat. Yes, it goes well but you missed the point of it. You can go faster. By getting the entire float out of the water you now have a hydroplane you will need a longer rudder. You will need a bigger pond.
We love you Corin! Go Ultra RC!
Danke !!!!!!!!
It's so sad they discontinued this awesome truck!
Looks cool
I put the mamba x esc as well. I put mambas crawler motor in. Don’t remember the name of it though. Same tires. Love myn.