Пікірлер

• 
  @raddthorw58334 күн бұрын

  No moving parts(

• 
  @DiecastNewb3 күн бұрын

  Correct. 🥺🤷🏽

• 
  @impromptu046 күн бұрын

  Very nice model. I agree with your rating. The red interior is terrific and goes with the pinstripe and redline tyres. I like white muscle cars too. Thank you for the review.

• 
  @DiecastNewb6 күн бұрын

  The interior is great. Def a good color combo! Thanks!

• 
  @BFDdrives6 күн бұрын

  Really a very beautiful model - loving the details. Such a great model - although the re-work on the left rear fender is of course something not so fine but as you mentioned you bought it as a used model car. So things like this can happen.

• 
  @DiecastNewb6 күн бұрын

  Correct. I might just leave it as is and leave it with this bit of character lol. Thanks!!

• 
  @wesleyxavier7436 күн бұрын

  How wonderful, very happy for this review, it's a shame about the defects in the paintwork (I hope they can be repaired), it's still a very cool model, especially with that red interior.

• 
  @DiecastNewb6 күн бұрын

  Oh yeah, even with the small faults, I like this one a lot! Thanks!

• 
  @50FknDeep7 күн бұрын

  Love Cutty!!

• 
  @DiecastNewb6 күн бұрын

  😬💪💪

• 
  @johnmcaleese84599 күн бұрын

  The stickers used on the gauges drives me crazy. No matter how good the paint and body might look, its a non purchase for me. Acme seems to be the biggest offender. Love your reviews. Thorough and professional.

• 
  @DiecastNewb9 күн бұрын

  Thank you! 😊 And yeah, there's always something with these releases. Do note, Greenlight owns GMP licenses so this is actually a Greenlight release. But I think Acme will take over FULL oversee of future GMPs so, let's see if there's better QA

• 
  @Howiex-is8gq12 күн бұрын

  Lovevthese cars i d buy one if they make them new again

• 
  @NinjaMaster77521 күн бұрын

  Where did you manage to find one of these? I can’t find one anywhere on the internet

• 
  @DiecastNewb21 күн бұрын

  I know... Hard AF. Actually bought it from a local guy. You might need to keep watch on ebay though. Do note, price will be elevated for sure

• 
  @NinjaMaster77521 күн бұрын

  @@DiecastNewbmy man I’m watching one right now for almost $400 😂

• 
  @DiecastNewb21 күн бұрын

  Dang lol!! Good luck!

• 
  @EVOSparksDieCastАй бұрын

  Cool defenders. Nice👍😊

• 
  @DiecastNewbАй бұрын

  Thanks!!!

• 
  @cjpamp1267Ай бұрын

  @cjpamp1267 0 seconds ago Does anyone make a 1965 Oldsmobile 442 die cast 1:18 Scale

• 
  @DiecastNewbАй бұрын

  The earliest I have is 1967. Haven't seen a 65.

• 
  @abdullah_alobydiАй бұрын

  How much in usd dwollar?

• 
  @DiecastNewbАй бұрын

  This one retailed for like 50 euros in German sites. Not sure how much it would be now since it seems not to be available.

• 
  @diecastshowАй бұрын

  This is really nice model bro👍😊

• 
  @DiecastNewbАй бұрын

  Thanks. It looks great for sure

• 
  @diegoalejandromartinezhuer653Ай бұрын

  how much did that cost

• 
  @DiecastNewbАй бұрын

  At that time, $140 or so. Might be more expensive on ebay since this was a limited release.

• 
  @YOCOSMINMAX16Ай бұрын

  What's the average price?

• 
  @DiecastNewbАй бұрын

  Right now,prices should be higher but the average a few years ago was from $40 to $70. Quality is quite good. I probably wouldn't pay too much but if you like it, go for it.

• 
  @YOCOSMINMAX16Ай бұрын

  @@DiecastNewb I found one very expensive on ebay. Thanks

• 
  @boudewynwagener7653Ай бұрын

  In your opinion better than HW61 and GL for the price?

• 
  @DiecastNewbАй бұрын

  It's better than Greenlight for sure in terms of overall quality, but if price is an issue, GL models are ok. HW61 have the upper hand, especially interior details (including dash) but are pricy on ebay! So models acquired will really depend on budget constraints. Thanks

• 
  @KOTR-SRGY-BOOSTАй бұрын

  They could at least do some 72-74 'Cudas since they already tooled up the parts for the 72 Sox & Martin, and yellow street drag cars. I mean, why not make a few since they already have the molds for the grille, taillight panel, etc... Seems like a no brainer to me.

• 
  @DiecastNewbАй бұрын

  I vote for that!!! 🤷🏽😊

• 
  @plymouthdie-castreplicasАй бұрын

  Brilliant car! I love a '69 Barra and mainly the 440 M-code like this one. Awesome color combination👌♥

• 
  @DiecastNewbАй бұрын

  Agree bud!! Thanks!

• 
  @impromptu04Ай бұрын

  This would sit nicely beside your GMP Southern "Speed and Marine" GTX. But we need more new molds from these diecast manufacturers! I'd like to see a quality 1969 Firebird Trans Am, for example.

• 
  @DiecastNewbАй бұрын

  Totally agree. That's why I'm going to steer clear on color variations. I have a few pre-ordered already but after those, I'm done buying these... Hopefully will get others, maybe even older HW61s...

• 
  @billpewterbaugh2982Ай бұрын

  the front fender/door gaps are HUGE!! what a shame to see that and it not acceptable in my opinion. So this model won't find a way into my collection even if it was half the retail price

• 
  @DiecastNewbАй бұрын

  Is it cool? Yes. But definitely not perfect. And indeed, that's the biggest con on this one. Crazy gaps. And like I mentioned, you could say it's part of the "story" for this particular release but the mold is probably getting worse by now

• 
  @dustdevl3404Ай бұрын

  The wheels are the same as the Gurney Cuda AAR Trans Am racer tribute car as is that front spoiler. It's pretty much a release of that car using the Pro Stock hood tooled up for the drag versions. Well, except for the Hemi. Personally, I think the misaligned doors actually enhance this one. It's supposed to be a cobbled up mess. Tempted by it but I have too many on pre-order and need to stop. At least for a while.

• 
  @DiecastNewbАй бұрын

  Ahhhh I definitely don't have that particular Cuda! And yeah, I get that this is supposed to be a "custom crazy build", but still the gaps... I think have a couple more Cudas pre-ordered and then, I might just stop with the color variations lol. And agree, too many pre-orders! 😫😅 Need to prep the new room soon!

• 
  @dustdevl3404Ай бұрын

  @@DiecastNewb 3 Cudas on pre-order, John Hagen's 68 Superstock, Arlen Vanke's 68 and the Bahama Yellow 340 ragtop from YCID. That one is the spitting image of the one down the street from me when I was a little kid in 1971. Assorted other Challengers and stuff too. And now Acme is releasing Gene Snow's 68 Hemi-Dart too. Got one free shelf and I can squeeze a few more in here and there. Problem is my collection is just like the Hotel California. They never leave.

• 
  @DiecastNewbАй бұрын

  😂😂 I hear ya. I need to reorganize my pre-order list because I'm not even sure if the list!!

• 
  @R1chardB1nghamАй бұрын

  Not seen one of these before but I really like it - there are some weird details visible if you know your VWs though; Dash is from curved screen Super Beetle/1303, whereas this is a normal, flat screen car. front suspension is very odd, the standard torsion bars are in place but not connected to anything, but then it has big A-arms between the front wheels. Think I'll leave mine on its wheels and not think about it too much...

• 
  @DiecastNewbАй бұрын

  Oh yeah, probably a mix and match from previous Solido releases lol. It looks cool, but yeah, I think that if you want exact or just proper details, Schuco might be better with VWs.

• 
  @kmdiecast96692 ай бұрын

  Lovely model👌👌

• 
  @DiecastNewbАй бұрын

  Thanks!

• 
  @shanebrbich56982 ай бұрын

  Been looking for this example for years now 👍🇦🇺

• 
  @DiecastNewb2 ай бұрын

  This one is a bit harder to find nowadays. I got lucky getting this one at a decent price on ebay.

• 
  @shanebrbich56982 ай бұрын

  @@DiecastNewb I have the red one ,however, MoPars should only come in 2 colours Black and White 🤣! Nah , they look great in all their quirky colours! I got some great 1:18’s myself! The Highway 61’s are the better ones! 2 off ‘70 Hemi challengers (Black) 1 ‘70 Cuda Hemi (triple Black) a White (orange interior) ‘71 Hemi Cuda and a heap of Hemi B bodies in black as well as my Australian muscle cars by biante! 👍🇦🇺

• 
  @DiecastNewb2 ай бұрын

  Lol!! I love white cars so you won't hear complaints from me but I do like brown American muscle cars for some reason (in search for some of them). I really need to buy some Biante's!!! They look very detailed!

• 
  @shanebrbich56982 ай бұрын

  @@DiecastNewb 😀 haha, yeah my ‘68 charger started life as a copper bronze colour car and I had it painted black with a white bumblebee stripe. Biantes are Very detailed. As good as the Autoart cars I believe. Some have sliding sunrooves as well as working side windows.

• 
  @dustdevl34042 ай бұрын

  How hard would this be to take apart? A bit of paint on the interior details like knobs and dash would make it much better. Exterior is nicely done, though. I think they put the money where it's most visible. Their Challengers have some dash and door detail and look very good on the shelf.

• 
  @DiecastNewb2 ай бұрын

  I haven't seen any videos recently but I don't believe they are too hard to pull apart. Indeed, exterior looks very good and I really like their Challengers too. I think these would make nice little side projects!!

• 
  @user-gi1re3hu9b2 ай бұрын

  I would like to see this car in a 1/24 scale size?😊

• 
  @DiecastNewb2 ай бұрын

  I believe that "Johnny Lightning" released a few Dusters in 1/24. Your best bet is to look for them on ebay as they are no longer produced. Thanks!

• 
  @Driver03782 ай бұрын

  Blue punch buggy no punch back!! 😜 Just had to get that out. Lol. Cool little model, but I was very much expecting suspension especially on a Baja car. C’mon!! Even a roll cage shoulda been part of the interior. But, then again, I don’t have any solido’s, so I didn’t really know what to expect. The painted belts made me laugh though. 😂

• 
  @DiecastNewb2 ай бұрын

  Lol!! Those painted belts like... Why!?!?! Solido makes "solid" (pun intended) models, good looking, cheap but of course lacking on the details dept. Oh well...

• 
  @boudewynwagener76532 ай бұрын

  I bought both versions. Have not looked them in detail as they are now stored. Thank you for showing me the model. Nice model for the money. Owners can do some nice detailing on interior, engine and under carriage to make it more realistic. ✊🏻✊🏻

• 
  @DiecastNewb2 ай бұрын

  Yeah, I think these particular releases would be great for that (i.e. Good looking and cheap enough to take some chances!) I'll be looking at the red release as well.

• 
  @analovotv2 ай бұрын

  Like9😊😊

• 
  @DiecastNewb2 ай бұрын

  Thanks! 😊

• 
  @Edmersondohc2 ай бұрын

  Nice😊

• 
  @DiecastNewb2 ай бұрын

  Thanks. Looks really cool.

• 
  @EVOSparksDieCast2 ай бұрын

  Great model mate👍😊

• 
  @abrarariyan19102 ай бұрын

  Where did you get this from??????

• 
  @DiecastNewb2 ай бұрын

  Bought it from Carloverdiecast a few years ago. But you should be able to find it in ebay as well as other sites such as: livecarmodel.com/products/1-18-mitsubishi-pajero-v31-green-diecast-car-model.html

• 
  @EVOSparksDieCast2 ай бұрын

  Nice model bro..

• 
  @DiecastNewb2 ай бұрын

  Thanks!! 💪

• 
  @Driver03782 ай бұрын

  What a beauty! Looooove the upgraded engine with the removable hood to show it off. The red sway bars and oil pan certainly do make the underside pop. As I’ve said before, I love ACME models, but AGAIN the rotating callipers …. 🤦‍♂️ And yes, the stubs on the headlights were a bit of a let down too, but overall, I’d buy it. 😉

• 
  @DiecastNewb2 ай бұрын

  Yeah, cons are more like nitpicking but indeed, it is still a cool model and that engine... 😲 I believe John still has a few of these available to order, so hint hint lol

• 
  @impromptu042 ай бұрын

  Good idea to have a removable hood-that engine needs to be seen! Love the detailed distributor and spark plug cables. I have the Exact Detail yellow and black 'Cheap Street' version with a bench seat. A quality model. Thanks for showing it to us.

• 
  @DiecastNewb2 ай бұрын

  I think the only Exact Detail I have is a Camaro. Seems they were on top of the game with regards to models and tooling at that time! Thanks for watching!

• 
  @johnrfoxinc2 ай бұрын

  Thanks and I missed the sun visors not being on my sample so I never corrected it for production. I think the color in the sun is outstanding, thats what I was going for but then nobody displays there models outside, LOL.

• 
  @DiecastNewb2 ай бұрын

  I thought it was weird it didn't come with any lol. And yeah, that candy blue is great. Chose a Pic with a natural sunlight for the thumbnail just for that reason. Good one for sure! 🔥💪💪

• 
  @kmdiecast96692 ай бұрын

  Wowww hell lot of details 🫶clever placement of limited edition number plate

• 
  @DiecastNewb2 ай бұрын

  It's a real beaut!! 🔥 Thanks

• 
  @rc-fannl73642 ай бұрын

  Nice, but no "scanner" effect?

• 
  @1969camaro2 ай бұрын

  I like to purchase that one please let me know if it’s available

• 
  @DiecastNewb2 ай бұрын

  I'm not a seller, I'm a collector. Best bet right now ebay as these have been out of stock for a while. 🤷🏽 Thanks.

• 
  @1969camaro2 ай бұрын

  I’d like to order one

• 
  @DiecastNewb2 ай бұрын

  They're still some in stock. Visit www.118scalemusclecars.com/product-page/ycid-23-1969-camaro-rs-azure-turquoise

• 
  @treborrobinson86652 ай бұрын

  The music man lol just talk about the car

• 
  @DiecastNewb2 ай бұрын

  Naaah. It's easier for me to just write than to record my "beautiful angelic voice" take after take lol 🤭😬

• 
  @joeg43822 ай бұрын

  Maisto does them so much better. Great video, thank you. You just saved me 260 dollars. 😁

• 
  @DiecastNewb2 ай бұрын

  Hello. I don't think Maisto does a 1/18 Chevelle or at least I haven't seen one. Also, PRETTY SURE, Maisto level of detail is lower based on the Maisto's I have. But one thing is clear, I would NEVER EVER pay $260 for an AutoWorld/Ertl unless it is a very limited Ertl Authentics release!

• 
  @Edmersondohc2 ай бұрын

  Nice

• 
  @DiecastNewb2 ай бұрын

  Thanks! It does look cool.

• 
  @lucasrem2 ай бұрын

  why film the box ?

• 
  @DiecastNewb2 ай бұрын

  It's the whole unboxing experience. Plus some boxes actually have decent information about the model (others are as plain as they can be 🤷🏽) 😊

• 
  @andersonduraes68702 ай бұрын

  Many finishing flaws, in addition to not having any working lights in a period technology car, it looks more like a fake replica from China than a licensed original.

• 
  @DiecastNewb2 ай бұрын

  It actually did have working lights when new. But indeed, definitely NOT perfect. And at the time I bought it, I think it was like 40 bucks which at that price was great unlike what they go for nowadays. Thanks!

• 
  @andersonduraes68702 ай бұрын

  @@DiecastNewb Congratulations on your good work, I have been following how the price of these miniatures has increased as the quality drops, perhaps it is the standard of Chinese work, which is incompatible and costs more than 300 USD

• 
  @DiecastNewb2 ай бұрын

  Thank you! And yes, prices are increasing on EVERYTHING but it really irks when quality takes a hit. Thanks!

• 
  @Howiex-is8gq2 ай бұрын

  The plate under the door! Do cuda have them? Never noticed them on a real car......

• 
  @DiecastNewb2 ай бұрын

  Do you mean the rocker panel? Yes, they do. They don't look as gaudy lol, but they do have them.

• 
  @Howiex-is8gq3 ай бұрын

  This would match my christine model...nice

• 
  @chrisflorian43083 ай бұрын

  Hello. A nice looking model. The sidepipes are a cool feature on this version of the Dodge Viper. Happy enough your model isn't damaged. These days I already pre-orded the upcoming 1:18 GMP 1970 Plymouth Road Runner *Graveyard Carz* (Q2/2024) and I am looking for the 1:18 ACME 1970 Dodge Challenger R/T Dodge Fever (Bright Red) (Q3/2024). Best regards Chris

• 
  @DiecastNewb3 ай бұрын

  Yeah. I saw a feature that the sidepipes get very hot!! Those should be good ones!! 😲💪

• 
  @chrisflorian43083 ай бұрын

  @@DiecastNewb Have nice easter. GMP is in my opinion always a good choice. I really love my 1:18 GMP 1970 Dodge Coronet SuperBee (Go Mango orange) 👍. Today I sold my old ERTL 1969 Camaro Z/28 on EBAY. I sell my old muscle car models (1:18) one by one and buy new and more detailed ones from GMP and ACME. I am not the biggest Ford fan, but I am also interested in the upcoming 1:18 ACME 1965 Shelby GT350 "snake on a plane". Looks really nice. Now I am waiting for pictures of the real model: 1:18 ACME 1970 Dodge Challenger R/T "Dodge fever"

• 
  @DiecastNewb3 ай бұрын

  @@chrisflorian4308 I'll probably end up selling my older less detailed models as well... I'm running out of space too! Lol

• 
  @chrisflorian43083 ай бұрын

  @@DiecastNewb Me, too. In the next days I sell another old ERTL model. GMP and ACME produce now these days to much amazing 1:18 muscle car models I wanna buy 😀. I already pre-ordered now the 1:18 GMP 1970 Plymouth Roadrunner (Q3/2024) and the 1:18 ACME 1965 Shelby GT350 (Q4/2024). Have you already seen some photos of the upcoming 1:18 ACME 1970 Dodge Challenger R/T "Dodge fever"? Until now I haven't found any real pictures of the model. Maybe I also need to buy this model, too 😂

• 
  @DiecastNewb3 ай бұрын

  @@chrisflorian4308 saw the email announcement but I don't think there are any sample pictures around yet

• 
  @analovotv3 ай бұрын

  Like6😊😊

• 
  @DiecastNewb3 ай бұрын

  Thanks!