Пікірлер

• 
  @ronnieholland772518 сағат бұрын

  I always make sure I have a 4 or 5 hour layover in lax because so much walking and trying to find your way to the gate I went to the Philippines back in February the walking I did in Atlanta and lax was a total of 9 miles

• 
  @mikedoingmikethings70214 сағат бұрын

  @@ronnieholland7725 wow! Hahaha that’s quite a lot of miles! Yes sir! I know that walking in LAX is a PITB not to include the delays and such from LAS. That’s why I’d rather drive.

• 
  @thomasdaum19274 күн бұрын

  Put a new PCV valve in it ! They are cheep .

• 
  @mikedoingmikethings7024 күн бұрын

  I'll keep that in mind, thanks!!!

• 
  @thomasdaum19274 күн бұрын

  @@mikedoingmikethings702 very easy to change also !…..

• 
  @andrefrank82706 күн бұрын

  So?

• 
  @MRSHONUFF10114 күн бұрын

  WTF MAN WASTED MY DAMN TIME WHY NOT VIDEO YOURSELF PUTINNG IT TOGETHER FROM THE START JACK ASS

• 
  @Itsmejason18223 күн бұрын

  How long did it took you guys from Disembark, immigration then transfer to T2? We only have 2 hrs and 20 mins layover but we dont have check in. Are we going to make it? Thanks

• 
  @mikedoingmikethings70223 күн бұрын

  Hey Jason! It took about 30 mins to disembark off the plane, immigration and luggage... Walk was about 5 mins and immigration took 2 mins because there's no one there, so that depends on how many people with foreign passport holders... It will take about 10 mins for the shuttle to get to T2, but that also depends IF the shuttle leaves right away and TRAFFIC... But, 2 hours is plenty of time IMHO... HAVE FUNNNNN!!!

• 
  @marcobertozzi938826 күн бұрын

  L ' ogiva originale pesava 167 Grani

• 
  @mikedoingmikethings70226 күн бұрын

  I believe so! I've tried all kinds of bullets even the 175gr SMK and 180gr but it really likes the 150gr-155gr bullets in my experience

• 
  @oldschoolvinylrips5644Ай бұрын

  Southwest has 2 free luggage allowance Vegas to LA

• 
  @mikedoingmikethings702Ай бұрын

  Ah yes! southwest is probably the only airline now that allows 2 free checked luggage. The rest are baiting passengers with a low initial fare, then nickel and dime them. Thank you for commenting!

• 
  @ronnieholland772518 сағат бұрын

  ​@@mikedoingmikethings702you should have drove to lax from Vegas it would have been faster and cheaper

• 
  @mikedoingmikethings70214 сағат бұрын

  @@ronnieholland7725 That was actually my original plan, but my wife does not want us to drive there… she won, again. LoL

• 
  @stu.chainzАй бұрын

  Disgusting

• 
  @mikedoingmikethings70229 күн бұрын

  What made you said that?

• 
  @That90sShow2 ай бұрын

  2009s and 10s don't have a 5.0

• 
  @mikedoingmikethings7022 ай бұрын

  Yes sir, you are correct...

• 
  @mikedoingmikethings7022 ай бұрын

  Si Flight Attendant Ma’am Claire po deserves a pay raise! Hahaha

• 
  @PhilippineAirlinesTV2 ай бұрын

  Hello, Mike! We highly appreciate you for choosing to fly with the Heart of the Filipino! We hope that we were able to make you feel our #BuongPusongAlaga (whole-hearted service) on your flight with us! Thank you very much for your support and we hope to see you again on board!

• 
  @TacticalJ832 ай бұрын

  These came out amazing! I’m getting ready to get some in the garden and the torched wood was a great touch

• 
  @mikedoingmikethings702Ай бұрын

  It's been 3 plus year since and the wine barrel char had since wore out but, the mineral oil prevented the wood from shrinking since it is super dry here in Las Vegas, Nv. I may have to re-char the wood and reapply some mineral oil in a few weeks. Thank you so much for the kind words!

• 
  @SheySheyFrans2 ай бұрын

  Glad you enjoyed po your vacation here in the Philippines. By the way po, nag subscribe din po ako sa inyo. God Bless

• 
  @mikedoingmikethings7022 ай бұрын

  Hahaha we did enjoyed our vacation at sunog na sunog hahaha salamat din sa sub haa! I really do appreciate it!

• 
  @istiaque_wanderlust3 ай бұрын

  I have a little collection of mulberries..Top among them are Turkey mulberry,Australian hybrid mulberry,pakistani long mulberry,Indian mulberry.I hope to have some more like Chiangmai 60 and jumbo variety as well.

• 
  @mikedoingmikethings7023 ай бұрын

  That's awesome to know!!! I bought a Pakistan from Just Fruits and Exotics from Florida, but the damn thing just sucks up water and taking up space and it's been 2 years since (one season old when i bought it) and it has not fruited and should have been already since it is 3 seasons old total. It is very frustrating because I don't know why it's not fruiting. My thought was that it is a "tissue cultured" plant when I bought it.

• 
  @joe73273 ай бұрын

  If you're going to put a scope mount on an M1a, use a Basset Machine mount. They are made in Texas and, in my opinion, are the best mount out there.

• 
  @macnitt40393 ай бұрын

  Nice

• 
  @Ksalvador7773 ай бұрын

  Nice watching ❤❤support

• 
  @brothersoulfilms53724 ай бұрын

  How do you upload the audio files you took?

• 
  @mikedoingmikethings7024 ай бұрын

  I am using my iphone 13 promax. The audio is automatically replaced by the mic being used. If you were to use the mic to replace the audio using an insta 360 or GoPro, you must use a free app audio recorder on your phone and export that in with the video using a free video editor like “capcut”.

• 
  @Den-sc8cp5 ай бұрын

  Дякую

• 
  @mikedoingmikethings7025 ай бұрын

  Будь ласка!

• 
  @user-qo7sv2ky5w5 ай бұрын

  We took a 600 pound + boiler up the stairs with this and it held up Strap wouldn’t stay secured which was a real pain in the ass so we used ratchet straps that we got instead

• 
  @eithieus16526 ай бұрын

  You can’t judge the flavor until about the third year. It just won’t have it. Hope this helps.

• 
  @Hanad36 ай бұрын

  a $100 or so more you could have gotten a 13th gen with the same aspect but nonetheless

• 
  @mikedoingmikethings7026 ай бұрын

  Ow trust me, I wanted to do that! My budget was less than $500 and it ended with $600+ hahaha The Victus is everything I needed and more.

• 
  @superweeniehutjrs38966 ай бұрын

  These are ugly laptops. why do you not buy good laptops like an HP HDX 9000 from 2007 it was 20 inches. 20 inches is a lot of inches, do you think you could handle that many inches? It'd be like a horse i'd think! So what do you do for a living? for me I work at an orange juice factory in Alaska. We grow all our Oranges up here and press them into the most wonderful orange juice on the planet. God bless and remember always wash your bottom after you dump.

• 
  @mikedoingmikethings7025 ай бұрын

  I am using the laptop to edit videos. I'm not even using it to play games. I just thought this has the computing power to weight ratio despite the fact that it is $150 bucks over my budget. I am a law enforcement officer for Clark County NV. I'm jealous because I love to grow fruit trees but we can barely grow anything here in the desert.

• 
  @Mr.Mister19746 ай бұрын

  Put ssd in it would help out.

• 
  @mikedoingmikethings7025 ай бұрын

  Thank you! That is my plan, but I'll have to wait until the warranty expires as they will not cover the laptop if anything happens to it if I modified it. For now, I have a Samsung T7 2TB to compensate for the lack of internal SSD.

• 
  @TrusteftTech6 ай бұрын

  Oh and in case you have to use a system which isn't as well performing. When you want to transfer 200GBs of data between drives, it's usually better/faster to do it in smaller chunks. Depending on the SSD there are different size of cache memory on the SSD from 0 to much more, which affects the speed of the SSD when transferring large files. Also when you transfer a lot, the SSD can over heat and slow down. Depending again on the SSD and any cooling solution it might have. Usually for more budget systems/drives, there is not even a simple cooling solution for the SSD. Add to the possibly cache less drive and you have terrible speeds when transferring several GBs at once. Same if you happen to use mechanical drives, though for different reasons. So if for example you have 200GBs of data, try to do it in chunks of 20GB of 15GB. If you check the time it will tell you far less time to transfer them this way than all in one go. That's it. Take care.

• 
  @mikedoingmikethings7026 ай бұрын

  Awesome!!! thank you for the advice, I'll keep that in mind...

• 
  @lucifermorningstar21546 ай бұрын

  Addressing fluctuations was resolved for me by using a high-quality cable and ensuring I had the latest up-to-date driver. However, obtaining the correct updated driver proved to be a significant challenge.

• 
  @TrusteftTech6 ай бұрын

  @@lucifermorningstar2154 If the cable is of the right specifications and not damaged, it shouldn't make any difference. Cheap or expensive, high quality or not. It's digital, it doesn't matter. For the updated driver bit, I am not sure I understand. Driver for what exactly in this case?

• 
  @TrusteftTech6 ай бұрын

  SSD transfers etc, is in megaBYTES not megabits per second. JFYI. Glad you got a much better PC you are satisfied with. Enjoy!

• 
  @cuteanimals75606 ай бұрын

  I don't know why this video is recommended to me 😂

• 
  @mikedoingmikethings7026 ай бұрын

  HAHAHA I have no idea!!! but thank you for the laugh!🤠

• 
  @cuteanimals75606 ай бұрын

  Its all love

• 
  @superweeniehutjrs38966 ай бұрын

  Because Doe Jiden is going to get you

• 
  @samuelriveros64466 ай бұрын

  Just wondering, ¿For the type of work that you do, isn't it better to build a desktop pc?

• 
  @mikedoingmikethings7026 ай бұрын

  I don't know much about computers. I was just doing a "quick" side by side comparison between the 3 laptops. My plan is to buy the cheapest laptop that would work for the day to day basic use and in 3 years, I would sell it for half I paid for and buy a new laptop. That's my plan, but, is it better to build and spend all that money? I also need the device to be light so i can carry it with me when we travel.

• 
  @NishantKumar-cr6fb6 ай бұрын

  Bro casually copying 213 GB for Speed test. LMAO

• 
  @superweeniehutjrs38966 ай бұрын

  Hi sweetie. That should be no problem at all for modern STD's, he is probably using a USB 1.1 port or an iphone lightning cable instead of the proper settlement's cabling in the south of France.

• 
  @mikedoingmikethings7026 ай бұрын

  I never claimed to be an expert on anything. I was just comparing my old laptop to the two new laptops that I purchased. I thought i could do that so see how fast the SSD read and write speed and not the computer speed?. If you could point me out on the right direction to make a better video in the future, I would appreciate it as I am always willing to learn...

• 
  @NishantKumar-cr6fb6 ай бұрын

  It's cool man. Just make them interesting like these.. I literally laughed seeing that 🤣😂

• 
  @bluetoothtv6 ай бұрын

  Awesome printer

• 
  @mikedoingmikethings7026 ай бұрын

  Salamat!!! medyo kamahalan pero talagang sulit!

• 
  @bluetoothtv6 ай бұрын

  @@mikedoingmikethings702 ano po pini print mo dyan sir?

• 
  @bluetoothtv6 ай бұрын

  Ang gaganda ng Mulberry mo sir I also have several varieties of Mulberry but they are still saplings 853 subs here :)

• 
  @mikedoingmikethings7026 ай бұрын

  Salamat bossing!!! hehehe ka uumpisa palang, kala ko hindi mabubuhay sa desyerto hahaha SALAMAT SA SUB!!!

• 
  @bluetoothtv6 ай бұрын

  @@mikedoingmikethings702 Mas gusto yata ng mulberry sir yung naaarawan,yung mga mulberry ko na hindi masyadong naaarawan ang bagal lumaki

• 
  @edwardx34257 ай бұрын

  "promosm"

• 
  @frankq56377 ай бұрын

  Ur video really helps me!

• 
  @mikedoingmikethings7027 ай бұрын

  AWESOME!!! I'm glad it did!!!

• 
  @mystictheninja14867 ай бұрын

  the little metal keyhole cover that blocks junk from getting in the keyhole broke today for me. It seems to just be a little metal thing connected to a spring and I think the spring popped off. How the heck do i get that thing back where it belongs in such a tiny opening on the car? I don't want snow and rain getting in there and rusting the mechanism.

• 
  @MathNotMathing7 ай бұрын

  The most important part was glossed over! Most people want to see how to tighten it! From start to finish.

• 
  @mikedoingmikethings7027 ай бұрын

  I did... wrap it around the item you're trying to secure, tighten the buckle, position of the locking bar. That is it.

• 
  @cuda40948 ай бұрын

  probably ammo issues

• 
  @shawnleary9 ай бұрын

  i think if you click Surface it auto puts it onto the model

• 
  @mathewtorres13529 ай бұрын

  These things are trash don’t buy them

• 
  @gregorygalati34359 ай бұрын

  You talk to fast

• 
  @mikedoingmikethings7029 ай бұрын

  LOL you can slow it down 25% on the playback speed

• 
  @lloydprunier441510 ай бұрын

  Thanks for posting this! I just bought the heaviest rated one they have and I used it to move an old washing machine. Didn't know about the strap process and my buckles are just to knurled rods that pinch the belt. After moving the washer I didn't know how to get the straps loose. Now I will be more careful or change to ratchet straps. The stair rollers seem kind of flimsy, but worked great going down my 5 steps.

• 
  @mikedoingmikethings70210 ай бұрын

  I'm not a famous youtuber nor posting the best content, but I am glad that this video helped someone...

• 
  @amadoserna263510 ай бұрын

  Fig fruit

• 
  @besnikefaruku952310 ай бұрын

  😋😋

• 
  @Stinktierchen10 ай бұрын

  Thats a similar way I thought doing it too, but then I rather bouth the proper tool on the used maked for 40€ and after using it I will sell it again(literally not loosing any money or just a little, because of the shipping). So if you have a chance getting a tool cheaply and resell it back again. I would not go this path. Only if you have no other options at all, this is the last option left ;)

• 
  @daves544510 ай бұрын

  Thanks for this useful video. Looks like I need to replace my support panel for my new 900 and your video is the best one I have seen to do just that. Fingers crossed!!

• 
  @mikedoingmikethings70210 ай бұрын

  It is pretty straight forward. Unplug the two wires and move the panel to the right and it will come off. It's just being held by plastic tabs under it. The wires in the back are "specific" so it won't fit on other slot if you accidentally plug it in on the wrong spot. But, if in doubt, take photos of the wires prior to removing them... Good Luck!!!

• 
  @daves544510 ай бұрын

  @@mikedoingmikethings702 that seems like the easy part! lol i need to take everything off and replace that gray support panel that snaps onto the actual cabinet. Looks like I also need to dissect most of the parts that are attached to the resin tank to be able to take it off. Your video shows more than most.

• 
  @m.creekrenovations10 ай бұрын

  Great stuff! The water pressure is bad in my house and all the incoming water goes through the water boss 900. The power went out a couple of days ago for 24 hours and now it seems like it’s not working. No error codes, just when I ran the water for 20 min to try to clear the pipes the water the water pressure dropped and I can’t get it back. After regenerating it still nothing. Any advice?

• 
  @m.creekrenovations10 ай бұрын

  I’ve only had the unit for like 4 years

• 
  @mikedoingmikethings70210 ай бұрын

  First you have to find out if the water pressure is good (40-60 psi) before the water softener. You can switch the dial to "BYPASS" and see if that makes a difference. When the resin is no longer good, it would float up and go through the water line and clogs the faucets, shower heads and washing machine. I found this out the hard way. I installed an inline whole house filter after the water softener just in care this happens again and saves me the hassle of clearing our waterline. Here's what you can do: 1-Does your outside of the house water pressure good? 2-Bypass water on the water softener (dial is located by the In-Out water supply line) 3-Remove faucet aerator and see if there's any resin 4-Check prior to water pressure regulator (looks like an enclosed copper bell) in the garage, check before and after this device for pressure. It could be that this went out and needs replacement. Good Luck and let me know if this helps!

• 
  @mikedoingmikethings70210 ай бұрын

  @@m.creekrenovationsremove the inlet from the water softener and measure the pressure if you have a way to do so to pinpoint the problem. If the water softener is only 4 y/o I highly doubt that the resin is bad, but not impossible. One sure sign of bad resin is, it floats up and it comes out of the tank out to your faucet.

• 
  @watchman187211 ай бұрын

  Thanks.

• 
  @pondbearflyer119311 ай бұрын

  160$ now in norcal, Aug 2023. Thanks for the explanation, i will attack it with vigor 👍🫶🤠

• 
  @mikedoingmikethings70211 ай бұрын

  Holy wow!!! I guess it won't be too bad if you use it and sell it once you are done...

• 
  @blueridgedsia11 ай бұрын

  why in the hell would you make this video by filming it with your phone

• 
  @mikedoingmikethings70211 ай бұрын

  I'm too lazy to do the fancy editing and youtube ain't paying me sh!t...

• 
  @blueridgedsia11 ай бұрын

  fair enough! @@mikedoingmikethings702

• 
  @watchman187211 ай бұрын

  Be thankful he took the time to do the video at all. You got the tutorial for free.

• 
  @Mel-fo3nl Жыл бұрын

  What kind of chemical did you use to clean the anode rod?

• 
  @mikedoingmikethings702 Жыл бұрын

  CLR or Distilled White Vinegar and a bristle brush…

• 
  @alcurtis236 Жыл бұрын

  After a winter in storage, fully drained, the pressure relief valve has small leak. I'm afraid it is molded into the tank. Any thoughts?