Пікірлер

• 
  @GiangNguyen-TRT-CAАй бұрын

  what is resistor connect on your capacitor for . Please explain .

• 
  @jp9403Ай бұрын

  You're not getting an accurate reading with those resistors on there.

• 
  @mbrawn6505Ай бұрын

  What about voltage testing on cap

• 
  @paulputnam23052 ай бұрын

  “Maybe one day Honey”

• 
  @bcbloc024 ай бұрын

  Been years and my AI series is still going strong!!

• 
  @floridaflywheelersantiquee75784 ай бұрын

  Thanks for sharing

• 
  @mkegadgets43804 ай бұрын

  A great video, unfortunately, the audio sounds like you’re in the bathroom. And you could zoom in a little bit so we can see the unit you’re talking about. Before your post, please review your videos.

• 
  @1waukesha4 ай бұрын

  Directions unclear: how to check its uncharged. Idea: lick it ( see if it tingles like a 9V) Update: eyebrows have mostly grown back now, and I think I may have done something incorrectly on that last “test”🤣

• 
  @GHOOGLEMALE5 ай бұрын

  Thanks - If a capacitor passes the rated capacitance, is that confirmation it is good? I have a 35uf +/- 5% reporting 34.6 - However, the motor is still just humming when I turn it on. Could it still be a duff capacitor please?

• 
  @securenc14 ай бұрын

  A 35µF +/- 5% is equal to a range of 33.25 - 36.75µF, therefore 34.6 is within tolerance - and considered good.

• 
  @poppy520607 ай бұрын

  Your energy and passion for what you build and teach, is contagious!!! At 63, you have helped to inspire me to get up off of my butt, dust off my tools and start making/creating once again!!!

• 
  @Dancing_Alone_wRentals7 ай бұрын

  tHanks for the video. 3:00 One of those bandsaws is a Walker Turner.... One of these days I'll find one to complete my Walker Turner orchestra. One of these days, I'm in no hurry.

• 
  @Cetrifuga19458 ай бұрын

  Ciaoo yimmi è sempre un piacere vedere i tuoi lavori devo essere onesto e bella anche la tua persona mi piace devi essere onesto e altro ok 👌

• 
  @hamzadorukyldrm760011 ай бұрын

  Hi there I've bought a pizza oven lincat po360-2 it's 14.4kw 400v 3phase what size of converter I need to buy!???

• 
  @hamzadorukyldrm760011 ай бұрын

  Hi there I've bought a pizza oven lincat po360-2 it's 14.4kw 400v 3phase what size of converter I need to buy!???

• 
  @philbuilder1 Жыл бұрын

  0:49 0:51 can rotory phase converter create two 240v lines and one 480 volt line?

• 
  @offuttjr Жыл бұрын

  Thanks for sharing …

• 
  @johnbolongo9978 Жыл бұрын

  Gotta love a nice workshop.....nicely done.

• 
  @martinmoffitt4702 Жыл бұрын

  are they ever bolted to the ground or just sit there??

• 
  @ejb2184 Жыл бұрын

  What can make a phase converter run non stop

• 
  @BellofattoBrews Жыл бұрын

  My mother in law was originally from Meadville and still has family there. I’ve visited your brewery on one of my visits and loved your place.

• 
  @tujuprojects Жыл бұрын

  Have you tried to sell those in Europe?

• 
  @spevakdesigns Жыл бұрын

  I drove a very similar Kubota yesterday to pull on a few trees as we cut them down and direct them away from buildings, towards an access road for easier cutting. First time driving a tractor like that, very impressed with it's ability off road.

• 
  @Wrighmachining Жыл бұрын

  Thanks for the video, i will add your video to my notes in mine. Hey, i have purchased a Rode lapel mic and used it and it has greatly improved sound quality. Perhaps it may work well for you guys :)

• 
  @mts7274 Жыл бұрын

  These videos are frustrating because there's no standard on the numbering format for these capacitors. His clearly lists "MFD" on the label, but I've seen plenty that don't... just the weird upside-down looking 'h' symbol next to a capital "F". Plus the arrangement of markings on his multimeter look nothing like what the multimeters at Harbor Freight have.

• 
  @woowaptibam5253 Жыл бұрын

  This guy has some many different skills. You could tell him to make you literally anything within reason and he will make it if not from scratch damn near. It's amazing

• 
  @jairoorellana20872 жыл бұрын

  Great review

• 
  @MrRogsmart2 жыл бұрын

  Thanks Keith.

• 
  @cliffordmorgan37632 жыл бұрын

  Kello Keith I am in the same situation as I start working on heavy equipment back in 2013and I found out doing so, parts were not available for a machine I had so I bought a southbend 16 lathe to fix it and then well as it goes I started reading up through metal working books and the gears started to grind as I needed a few more machines. And 9 years later after working out of several small shops as I kept growing out of them I finally acquired a 10,000 sq ft shop that I am renovating know and my main expense right now is my three phase electrical service. I graduated high school in 2009 and have been serving in the armed forces since 2012. So I feel how rewarding it is to get a big shop to work in . Cheers and keep up the great videos and fantastic work on the machines.

• 
  @peterduke922 жыл бұрын

  I couldn’t understand you very well. Your video needs better audio quality.

• 
  @frankdavidson50432 жыл бұрын

  Please take your ad off DFace Book, we have seen enough.

• 
  @dennis-s2 жыл бұрын

  ''Interest in tools'' that's what's really gives you the start making things

• 
  @floridaflywheelersantiquee75782 жыл бұрын

  Thanks for sharing

• 
  @remodz63852 жыл бұрын

  Omg! Last company I would imagine going social justice and woke🤡🤡🤡

• 
  @brucewilliamsstudio4932 Жыл бұрын

  I bailed on the video as soon as she said "as a black woman"..... Most people could care less what your skin color is, but would be glad to honor you "as a person of character". Please stop with the oh poor me skit (victimhood). Most of us had a tough start and only through persistence we were able to succeed.

• 
  @charlesgause82242 жыл бұрын

  Cool

• 
  @RadiantJasmin Жыл бұрын

  Literally!

• 
  @MCEngineeringInc2 жыл бұрын

  Great oven!!!👍🏻

• 
  @mbuhelvisketan10062 жыл бұрын

  Can a solar system run this VDF

• 
  @3stagranch2 жыл бұрын

  Had no idea. Very cool Mr. Rucker

• 
  @danbreyfogle84862 жыл бұрын

  FINALLY I know what Keith Rucker does when he is not in the machine shop. I wondered what he did for his primary work and now I know and a I know a bit more about peanuts. Thank you American Rotary for this video and sponsoring Keith's great channel.

• 
  @jairoorellana20872 жыл бұрын

  Do you need a transformer along with with the rotary phase converter? I have a 9.7 kw machine but I don't know amperage or volts for it

• 
  @davidsellars6462 жыл бұрын

  Girl, you are a person. A very capable person that will go very far. I call you "girl" only because you are younger than me. When I hired, I had two questions: can you do the job and; will you do the job. I have worked with (females) that were leaps and bounds better than guys. The only time I have a problem is when the female part is thrown in my face. I give no more credit and give no less. The only thing I will say is that I wish you talked a bit slower because my hearing is pretty bad. I would hope to someday meet you because you are a spark plug and your enthusiasm is addicting.

• 
  @TamaraRobertsons2 жыл бұрын

  Thank you David! Perhaps the American Rotary team can add the closed captions option to this video to make it a bit easier to translate my Southern speed :D

• 
  @cyrusaraza17202 жыл бұрын

  Sir may I ask, if I have a motor starting capacitor for "Dough Mixer" of 80µF 10+20% 270V, and I have a reading of 85µF, shall I say that the capacitor is in excellent condition?

• 
  @Americanrotary2 жыл бұрын

  That is less than a 10% difference so, if your capacitors can handle a 10-20% difference you should be good!

• 
  @dogrose332 жыл бұрын

  I cant even comprehend HOW you did all that. But it turned out beautiful!

• 
  @dogrose332 жыл бұрын

  Love the video, Love the passion he has, and I want what ever it is he just made! Excited to see what else can be done with that Hot Shot Oven/Kiln

• 
  @BrianEltherington2 жыл бұрын

  Sweet custom paint!

• 
  @bcbloc022 жыл бұрын

  Leave nothing stock!

• 
  @Americanrotary2 жыл бұрын

  That's right!

• 
  @baggd652 жыл бұрын

  A lot of work. Good job!

• 
  @floridaflywheelersantiquee75782 жыл бұрын

  Like it good 👍 job

• 
  @JoelsVideoJunk2 жыл бұрын

  Jimmy my Kids love your Netflix series. I have been making stuff for years but what you are doing on Netflix is about the best thing on my family TV. Keep up the great work!

• 
  @jsenyo222 жыл бұрын

  Would be nice to actually show the idler motor

• 
  @cyrus99122 жыл бұрын

  Great taste hun. The secret to ranking - P r o m o s m !!