Пікірлер

• 
  @gt580311 сағат бұрын

  I've is the spline bit for the cv joints ?

• 
  @gt580311 сағат бұрын

  Correction . What size ?

• 
  @davejohnson337621 күн бұрын

  It was going so well, what happened man?

• 
  @SVsAuto11 күн бұрын

  So much has happened... The good news is I still have the bus, and it is still in the same condition as my last video. Hoping to get back to it soon.

• 
  @ratridermaanАй бұрын

  Nice job on that one! What radiator are you using?

• 
  @71iron133 ай бұрын

  Hey have you ever run into any timing belt tracking issues after replacement? Mine keeps tracking towards the diesel pump when I turn the engine over a few times.

• 
  @dustinwamsley89805 ай бұрын

  Imma need you to work on mine for me 😂😂

• 
  @The0Matador06 ай бұрын

  I’m at this stage and was wondering how you get those bits that curve in. I saw one bloke just cut before the seem which was smart.

• 
  @philipkirtzinger25126 ай бұрын

  Good video, thanks

• 
  @asurwyatt7 ай бұрын

  Yeah, good luck finding a clutch or a fly wheel for a one. I’ve been looking for two years I have an 82 Toyota diesel.

• 
  @SkaterStimm7 ай бұрын

  haha I have the same problem, someone covered my entire dog leg with bondo 1/2" thick. Tip heat the bondo with a heat gun and peel it off, no dust.

• 
  @AMJADALI-xp2bc8 ай бұрын

  Back light chahy kha se mile gii

• 
  @hfink11 ай бұрын

  Fantastic video thanks so much.

• 
  @SVsAuto11 ай бұрын

  Glad you enjoyed it!

• 
  @enriquer4865 Жыл бұрын

  Great job!!!

• 
  @SVsAuto Жыл бұрын

  Thank you!!

• 
  @pstreetgarage7304 Жыл бұрын

  Nice truck. I just recently found your channel. Watching your VW bus vids

• 
  @SVsAuto Жыл бұрын

  Welcome aboard! Glad you found us hope it helps!

• 
  @pstreetgarage7304 Жыл бұрын

  @@SVsAuto Yes. I just bought a bus. It needs alot of work 👍👍👍

• 
  @pstreetgarage7304 Жыл бұрын

  👍

• 
  @pstreetgarage7304 Жыл бұрын

  👍

• 
  @pstreetgarage7304 Жыл бұрын

  Great repair !!!

• 
  @SVsAuto Жыл бұрын

  Thank you!

• 
  @pstreetgarage7304 Жыл бұрын

  Very nice work. Digging the bending tool !

• 
  @SVsAuto Жыл бұрын

  Thanks 👍me too!

• 
  @pstreetgarage7304 Жыл бұрын

  Nice fit! I'm digging your content

• 
  @SVsAuto Жыл бұрын

  Appreciate it!

• 
  @pstreetgarage7304 Жыл бұрын

  Nice work.

• 
  @SVsAuto Жыл бұрын

  Thank you! Cheers!

• 
  @pstreetgarage7304 Жыл бұрын

  Just found your channel. I just picked up a 69 bay window. Needs alot of work

• 
  @SVsAuto Жыл бұрын

  Welcome! Glad you found us good luck with your project!

• 
  @Eurospec73 Жыл бұрын

  Great detail right up on this video. Is it possible just to remove the back portion of the subframe and leave the front still connected as long as it supported to get the steering rack out?

• 
  @SVsAuto Жыл бұрын

  I am not sure... If you try please update us here!

• 
  @Eurospec73 Жыл бұрын

  @@SVsAuto I have heard it was done that way but it's a lot harder it's always easier to just drop the subframe especially if the engine is out.

• 
  @pierrediedericks5385 Жыл бұрын

  Thanks for the awesome video man ! Just a quick question, how do you make sure that all the air is out of the system?

• 
  @SVsAuto Жыл бұрын

  You can bleed the air by cracking the banjo bolt and turning the steering until no more air is expelled.

• 
  @carlosdasilva8622 Жыл бұрын

  Did you bother to ensure the rack and pinion was at center before installing. May have oversteering to one side

• 
  @SVsAuto Жыл бұрын

  Yes centered before installing worked great!

• 
  @joedavex607 Жыл бұрын

  Great video! I'm about to embark on the same rack and same car, will follow your video as a guide.

• 
  @SVsAuto Жыл бұрын

  Good luck! Hope you are successful

• 
  @joedavex607 Жыл бұрын

  @@SVsAuto worked awesome. Thanks again. I swapped it out in a few hours and have totally forgotten about it since (which is the way it should be).

• 
  @ROONNYPARK Жыл бұрын

  Excuse me, I just wanted to know if you can help me with my car. I have a problem with the power steering. It spills all the oil. Can you help me? I removed the old steering and put a new one on, but I don't know how the connection is going.

• 
  @SVsAuto Жыл бұрын

  Just guessing, but it could possibly be the banjo fittings aren't sealing properly.

• 
  @chuyrock1622 Жыл бұрын

  Hi Steve great video thanks for sharing. I would like to know how you installed the computer and if you had to buy a special harness or did you use the same harness from the donor car? I am about to convert my 1970 VW bus but I am collecting information to be able to do it.

• 
  @SVsAuto Жыл бұрын

  I took the ecu from the donor car and modified it for use in the bus. If you are good with electrical stuff you can do it all yourself. There are also places that you can purchase premade harnesses and ECU'S. Took me about two days to modify the harness.

• 
  @chuyrock1622 Жыл бұрын

  Excellent video thank you very much for sharing. Does the heating channel have to be cut to be able to install the radiator?

• 
  @SVsAuto Жыл бұрын

  For the belly mount radiator setup it is necessary to cut the heat tubes, if your doing the engine mounted radiators you can keep them.

• 
  @brandonholtel1134 Жыл бұрын

  I might try this on f150

• 
  @dw6168 Жыл бұрын

  Yeah I've done this that s*** don't last nothing it'll also jam up your f****** latch so get the real s*** how about that

• 
  @Bloxwatch_180 Жыл бұрын

  Black electrical tape works good too

• 
  @BK-yt7ff Жыл бұрын

  The problem is the hinge so this is not a fix it actually makes it worse.

• 
  @8546billy Жыл бұрын

  Should’ve bought a Ford! Doors close with a twitch of the rist

• 
  @robert9754 Жыл бұрын

  Yeah for about 30 days

• 
  @COOKIEAJ100 Жыл бұрын

  great channel! HELLOOOOO

• 
  @SVsAuto Жыл бұрын

  Thanks for visiting

• 
  @gbodybidness787 Жыл бұрын

  Finally no more kathinkkkk

• 
  @Angrykat420 Жыл бұрын

  Stop slamming your door. If people greased and oiled their door mechanisms they would shut like butter

• 
  @Renagadebait Жыл бұрын

  Wow it takes less time to just fix it .

• 
  @georgebarrera9653 Жыл бұрын

  After four slams it needs a another replacement. Fix it properly

• 
  @doughboy1966 Жыл бұрын

  CorvairWild would use electrical tape.

• 
  @crimeboss330 Жыл бұрын

  A people like you I really appreciate each and every single bit of your time ❤

• 
  @MrWonkawonka Жыл бұрын

  Look at the line on the door. The door needs lifted up. Hinges need adjusted or replaced.

• 
  @MrWonkawonka Жыл бұрын

  I need some of that for my '99 two door two wheel tahoe.

• 
  @Despierto1983 Жыл бұрын

  Nice GMC bud And nice song

• 
  @zenogodofeverything3519 Жыл бұрын

  Naw

• 
  @goodvibes-rq7rq Жыл бұрын

  I can't wait to try this! 😂

• 
  @dougerd684 Жыл бұрын

  Huh I guess that pex shit I'd good for something

• 
  @Fastcarsslowwmoney Жыл бұрын

  I used pvc instead of pex on my old ford doors it works great

• 
  @JUSTDONTRUN. Жыл бұрын

  It’s actually the brass bushings in the hinges. Easy fix… u can use a hammer. Lol

• 
  @squarebody8269 Жыл бұрын

  Was thinking the same 🤦‍♂️

• 
  @Country_Nasty Жыл бұрын

  Or just fix your weather strip?

• 
  @2zer084 Жыл бұрын

  It’s not the weather strip, there used to be a nylon spacer that engages the second click on the latch, ford have the same shit, you can buy them at an auto parts store but then you have to take the striker off. This is better than the tape I have wrapped around mine.

• 
  @PhattyOgre Жыл бұрын

  Nice job not shaking the door as hard after the "fix". The door is still sloppy and moves at the top, which is where the noise is coming from.