Пікірлер

• 
  @dsun26253 күн бұрын

  Good job!

• 
  @TheKnightsShield23 күн бұрын

  Do you think it would be possible to use this for making the skin on a folding kayak?

• 
  @Bobby-hm4dz24 күн бұрын

  Specialist...

• 
  @leonda481729 күн бұрын

  Terrific! My lugs always wear out beneath the big toe first.I will try this once i'm there

• 
  @plinbleАй бұрын

  Was kind of hoping it was how to fold up tough polythene for emergency purposes. For something as good as was made in the video buy online, and it comes in a few days? Then have heat welded seams, but best done in a factory because of fume control?

• 
  @rocksalt636Ай бұрын

  What isn't cheaper than a starbucks coffee...

• 
  @KadirKucukАй бұрын

  Love the texture!

• 
  @neilsimmondsmediaprojectАй бұрын

  Thank you.

• 
  @calebmcdiddyАй бұрын

  What power input does your cctv camera take? I'm looking into making my own using a Panasonic SD5 WV-CP504, but the power input is this 3 prong one I've never seen before.

• 
  @neilsimmondsmediaprojectАй бұрын

  Hi. Thanks for the comment. I’m not sure about power consumption but the voltage is 12v DC which is standard for CCTV. The pin configuration might be for DC pin1 / 12v pin 2 0v and AC pin 1 / pin 3 24v.

• 
  @MrMeltedwelliesАй бұрын

  Absolutely brilliant neil

• 
  @neilsimmondsmediaprojectАй бұрын

  Thanks Mark. Posted a video at last😂

• 
  @yavuzerol2567Ай бұрын

  Super drybag

• 
  @PlayNowWorkLaterАй бұрын

  How many Starbucks ups of coffee did not cost for the scissors? Gaffer Tape? Ruler? The international method of determining cost. Nice!

• 
  @neilsimmondsmediaprojectАй бұрын

  Love it❤️And I can answer your questions. Tape = 1 SC (Starbucks Coffee) ruler = 2SC and scissors were second hand and cost a surprising 0.75 = SC at a junk sale.

• 
  @PlayNowWorkLaterАй бұрын

  @@neilsimmondsmediaproject hahaha. That’s awesome! Thanks for indulging me

• 
  @user-zx8du3ik2jАй бұрын

  Your mom told you to carry scissors in the "ice pick" knife stab mode? damn man I wont mess with your mom!🤣

• 
  @neilsimmondsmediaprojectАй бұрын

  That made me laugh. Well done. If you could see my mother 😂 bless her! As a ninja assassin though? You’re more likely to get Donald Trump to join a monastery in Tibet.

• 
  @user-zx8du3ik2jАй бұрын

  @@neilsimmondsmediaproject 🤣cheers

• 
  @ZOMBIEHEADSHOTKILLERАй бұрын

  tyvek is a good start..... but i wouldnt trust tape..... need to find a good way to plastic weld the seams shut.

• 
  @EnjoymentboyАй бұрын

  Something to keep in mind is that some tyvec is chemically treated to be mold and mildew resistant and you might not want that in contact with the things you're storing in the bag.

• 
  @hyperteleXiiАй бұрын

  No actual demonstration that it's waterproof.

• 
  @wj7495Ай бұрын

  This same method using a very permeable fabric would be a guide on how to make grow bags.

• 
  @osiralonАй бұрын

  Have you seen the NightHawkInLight waterproof tarp videos? Do you think that kind of treated cloth be viable for this purpose?

• 
  @neilsimmondsmediaprojectАй бұрын

  Hi. Thanks for the comment. I haven’t seen the videos. I’ll take a look later. You could use any fabric. But it comes down to waterproofing. I’ve made a few that are not at all waterproof, on a sewing machine, just because they are great for storage. So simple to make. 👍

• 
  @SatanicJamnicАй бұрын

  You have to be insane to trust piece of tape to hold warerproof.

• 
  @neilsimmondsmediaprojectАй бұрын

  Hi. Thanks for the comment. You’re probably right. I did give a warning about not using them in critical situations. Cheap and cheerful. You can of course up scale the principle from tape to ultrasonic welding of vinyl sheeting. Costs a bit more though. 😂

• 
  @SwiftieSince2013Ай бұрын

  You looked like a firefly in those yellow clothes dad but you’re still the best dad in the world (even when you look like a firefly) 😂

• 
  @SwiftieSince2013Ай бұрын

  This is by far the best video you’ve made so far (and I also love how 8yr old me was in the end!) 🎉❤

• 
  @SwiftieSince2013Ай бұрын

  That looked awesome dad ❤😊😂

• 
  @SwiftieSince2013Ай бұрын

  I hope you enjoyed that tea dad, it looked really nice (apart from the fly in it 😂)

• 
  @neilsimmondsmediaprojectАй бұрын

  I did!

• 
  @SwiftieSince2013Ай бұрын

  Very creative invention dad well done 👍🏻❤

• 
  @SwiftieSince2013Ай бұрын

  Hi dad, you’re doing so well at KZread ❤ Keep it up 👍🏻

• 
  @neilsimmondsmediaprojectАй бұрын

  Hey, thanks

• 
  @dragnfli1Ай бұрын

  What is gaffer tape? Im in the us and all i can think is that it might be like duct tape.

• 
  @neilsimmondsmediaprojectАй бұрын

  Hi. Thanks for asking. It is duct tape. We even have a company in the UK called Duck that make gaffer tape! The best stuff to use is the specialist tape made for joining this type of membrane. But it’s not cheap.

• 
  @thatwastakenagain2 ай бұрын

  due to lack of trae skills dind't know shiny surfaces are hard to glue

• 
  @neilsimmondsmediaprojectАй бұрын

  Thanks for the comment. The glue has more to grip if the surface is rough. 👍

• 
  @tonysmith262 ай бұрын

  Although I haven’t used my Trangia for years, I recall that using the frying pan as a lid on the pots reduced boil time significantly

• 
  @neilsimmondsmediaprojectАй бұрын

  Hi. Thanks for the comment. You are of course right. But I left the lid off for effect, to see the water boiling. 👍

• 
  @mistersmith39862 ай бұрын

  You my friend are a complete GEE KNEE OUS I think I'll try this on a pair of Topo Athletic that I just wore down. Thanx for the video my Running 🏃 Brother 👍 ⚔️ ✝️ 🇺🇲

• 
  @neilsimmondsmediaprojectАй бұрын

  Thanks for the comment. And many thanks. God bless you kind sir.

• 
  @ac-v53603 ай бұрын

  Great video! Yes, more repair videos would be great!

• 
  @District.243 ай бұрын

  Brits do it best. 😊

• 
  @neilsimmondsmediaprojectАй бұрын

  Thanks for the comment. Kind of you.

• 
  @JCleggy3 ай бұрын

  I gotta say, I thought you were crazy when you held up the new rubber heel, but it looks like you did an absolutely wonderful job. Congrats

• 
  @neilsimmondsmediaprojectАй бұрын

  Thank you! 😊

• 
  @runstant14 ай бұрын

  TOP VIDEO, PERFECTLY EXPLAINED.

• 
  @neilsimmondsmediaproject4 ай бұрын

  Thanks. I ought to make a few more. I’ve been making films about alien evidence. Not that I believe in aliens, plenty of people do!

• 
  @alunrhydderch17864 ай бұрын

  This is exactly what I've been looking for. Many thanks! Will try it, i wear the outside of my shoes very quickly.

• 
  @neilsimmondsmediaprojectАй бұрын

  Thanks for the comment. And happy scuffing!

• 
  @KeirMurphy4 ай бұрын

  Brilliant! Thanks!

• 
  @neilsimmondsmediaproject4 ай бұрын

  Cheers. Thanks for the kind comments.

• 
  @go55824 ай бұрын

  Hi handsome. Great channel and cobbler diy. I would like to know what do you drink & snack on durring your shoe repairs? Do you prefer English tea over Gatorade lime flavor?

• 
  @neilsimmondsmediaproject4 ай бұрын

  What a great question. And the answer is…… Tea. Earl Grey. I have never in my life even thought of drinking Gatorade. How about you? Which would you drink?

• 
  @louiseobrien17995 ай бұрын

  I would like to resole the whole of the shoe. The heal in your video looks excellent. Any ideas on how to find what lm looking for? Even just starting with a brand would be helpful.

• 
  @timandafish5 ай бұрын

  lol. middle of the ocean. haha yeah they got a whole island of plastic there.

• 
  @febragilisua6 ай бұрын

  Hello Neil SImmonds, I would really like to have the same product ingredients. In my country currently none or very few have this material (tyvek). Can we exchange information about these materials or also discuss other outdoor products?

• 
  @themanape6 ай бұрын

  Thanks, poor people like me could use this.

• 
  @okbutwhatisit6 ай бұрын

  Thank you, this was exactly what I needed to learn!

• 
  @DarcyWhyte7 ай бұрын

  Nice thanks! I have a pair of salomons and they're like new excep the tread is worn. The way the show is constructed it looks like one could replace the tread. To your knowledge do they sell the tread to be reglued on or do I have to use some generic tread?

• 
  @neilsimmondsmediaprojectАй бұрын

  Sorry about the very delayed response. I just used a cheap generic heal repair patch. They’re still on now. Two years later. And have lasted longer than the original!

• 
  @djbillye49437 ай бұрын

  the new rubber looks factory on them and matches.good show

• 
  @neilsimmondsmediaprojectАй бұрын

  Thanks for taking the time to comment. 👍

• 
  @internetrules85227 ай бұрын

  thank you for this video. i was considering getting a US surplus dry bag for like $35, but this seems like a fun project that i should try out my self. even If it doesn't work out, great i got to practice some DIY stuff and learn more about waterproofing.

• 
  @neilsimmondsmediaprojectАй бұрын

  That’s the spirit! And thanks for the comment. 👍

• 
  @tbrennancreative49588 ай бұрын

  Any ideas for court shoes/ tennis shoes that wear out on the ball of the foot?

• 
  @neilsimmondsmediaproject8 ай бұрын

  You could try having a go. Not much to loose if the shoes are going in the bin anyway. Keep the repair patch thinner than a heel. Let us know how you get on.

• 
  @seilgu8 ай бұрын

  can duct tape hold any weight at all?

• 
  @neilsimmondsmediaproject8 ай бұрын

  Some. But the idea of the video was to show how simple and cheap they can be. It’s easy to make a very technical and complex version with a high spec if you have a big budget and all the equipment.

• 
  @ruzziasht3498 ай бұрын

  Where's Colin, and why aren't you wearing a safety tie?

• 
  @thetruthserum28168 ай бұрын

  Tyvek can be ultrasonic friction welded as well as impulse sealed or stitched or all of the above...

• 
  @neilsimmondsmediaproject8 ай бұрын

  Thanks for taking the time to comment. I’m going to try stitching next. Wouldn’t have a clue how to ultrasonic weld.

• 
  @Scott_C9 ай бұрын

  Earned my sub. Great content.

• 
  @neilsimmondsmediaproject8 ай бұрын

  Thanks. Making some more content next week.

• 
  @Trainvta9 ай бұрын

  Very cool

• 
  @neilsimmondsmediaproject9 ай бұрын

  Thanks for taking the time to comment. 😊👍

• 
  @KenFullman9 ай бұрын

  This is why I'll never use starbucks. They're too damned expensive.

• 
  @neilsimmondsmediaproject9 ай бұрын

  🤣 You're right!