Пікірлер

• 
  @C3PerformanceКүн бұрын

  great stuff. used your instruction to find a hole in a customers 2020 Yamaha waverunner.

• 
  @MikeT10 сағат бұрын

  Glad it helped

• 
  @TheBerto84014 күн бұрын

  I have a question about a repair I need to do on my jetski if you don't mind. I have a 97 seadoo xp that I traded some rc car stuff for and when I got it home realized it was in a little bit rougher shape than I thought. Anyway around the front bumper where the two hulls are riveted together a couple of the rivets completely broke out the fiberglass so I was wondering how I should go about patching that up so I can drill new holes through and re-rivet it back together. Thank you

• 
  @MikeT14 күн бұрын

  I guess it would depend on how damaged the holes are. Are you able to open and clean up the hole and use the next size up rivet? If not, we use some 2 part stuff called Hysol on aircraft when we have issues like that and need to fill and re drill holes on a composite piece. It takes forever to cure but when it does, it's the same strength as metal.

• 
  @TheBerto84013 күн бұрын

  @MikeT it's hard to explain but the 2 holes that connect the front bumper are completely drilled out so the hole is now a horseshoe like it was drilled out. Gonna need to form some fiberglass to fill the gap of the whole and I'm just not sure how to begin lol. Wish I could show you a picture

• 
  @rtwynn24Ай бұрын

  Why is the oil feed cable on the rear not snapping back like the one in the front it seems like a spring or something isn't connected please help

• 
  @Nobody-qh7hkАй бұрын

  How do we get the side covers off?

• 
  @MikeTАй бұрын

  There are no side covers that need to be removed on the Sport 1000s

• 
  @Nobody-qh7hkАй бұрын

  @@MikeT GT1000 sorry..

• 
  @boyebabbАй бұрын

  How would you start if it was a hole all the way through?

• 
  @MikeTАй бұрын

  Either start on the inside and put a few layers of fiberglass cloth down or bond a thin piece of sheet metal to the inside and the build the repair off of that from the outside the same as shown in the video

• 
  @7771ham2 ай бұрын

  Where did you get the paint at? And is there a code I need to use? We’re doing the same thing to our seadoos

• 
  @MikeT2 ай бұрын

  Pinned comment

• 
  @thereve3 ай бұрын

  Do you have to drain the oil do one of these? I know most of the oil is up in the tank.

• 
  @blankblank70683 ай бұрын

  How much oil did you use?

• 
  @miguelaragao13 ай бұрын

  Saíste um belo de um sapateiro!

• 
  @MR7.62A13 ай бұрын

  I want to thank you for helping me troubleshoot my bike. Turns out it is the relay.

• 
  @MikeT3 ай бұрын

  Great, glad it helped

• 
  @calemkruger45924 ай бұрын

  is it possible to remove it and keep driving

• 
  @rlagosto4 ай бұрын

  man thanks for the video, I wish you would have left a link to the screwdriver for that screw, i have multiple precision small screwdriver kits and nada, searching on amazon for swiss mechanism specific

• 
  @MikeT4 ай бұрын

  I am a mechanic and have a very vast set of tools. That was a screwdriver that I inherited probably 20 years ago. I wouldnt know where to get one. Pretty sure it is just part of an eye glasses screwdriver set though.

• 
  @rlagosto4 ай бұрын

  Yeah I think its a .6 or a .8 cause its the only ones i dont have, lol @@MikeT

• 
  @aquft13464 ай бұрын

  Mines making a buzzing noise I changed the relay any suggestions

• 
  @MikeT4 ай бұрын

  Are you getting power to the starter?

• 
  @brandonmasterscatfishing8455 ай бұрын

  Where can you get a replacement spring screw? Mine went flying never to be found again.

• 
  @MikeT4 ай бұрын

  Same lol. I just used one of the 3 that hold the movement in. Not sure the size or specs of it but I think you might be able to get a kit with various small water screws in it.

• 
  @GwotGang5915 ай бұрын

  Where did you find the trouble shooting procedure sir can you post or link that information im sure its the same for my 08 700 grizzly but want to make sure thank you in advance

• 
  @MikeT5 ай бұрын

  In the manufactures manual

• 
  @shooter71192 ай бұрын

  @geotgang591 - Did you find a copy of this? I would be interested in it as well.

• 
  @jacktrue62016 ай бұрын

  Can you tell me if you put in an oem starter or was it aftermarket..

• 
  @MikeT4 ай бұрын

  I dont remember, sorry

• 
  @vicstewart48496 ай бұрын

  What was your sanding grit sequence/progression?

• 
  @richardjackson17458 ай бұрын

  Good job... very helpful

• 
  @MikeT8 ай бұрын

  Thanks, glad it helped

• 
  @RJ9mech8 ай бұрын

  Great job Mike! Will subscribe to both. -rd

• 
  @MikeT8 ай бұрын

  Thanks RD, I appreciate the support through out the years

• 
  @ryanhill73188 ай бұрын

  Both of your front wheel videos saved my butt! Thanks!!! You always seem to be working at night!

• 
  @MikeT8 ай бұрын

  Glad they helped

• 
  @TrainersTurning8 ай бұрын

  NEW CHANNEL

• 
  @Machinehead4448 ай бұрын

  Where did you buy the rebuild kit and break pads? Thanks

• 
  @MikeT4 ай бұрын

  I dont remember, sorry

• 
  @dickgoesinya94199 ай бұрын

  Great information!!Thanks for sharing.

• 
  @MikeT9 ай бұрын

  Thanks, glad it helped

• 
  @dickgoesinya94199 ай бұрын

  @@MikeT I ordered a new starter from Amazon last night and it will be here on Wednesday. Thanks again, I'm sure it will save me a load of time and cash if I had to take it to the dealer for repair.

• 
  @user-lx7tk1mu8w9 ай бұрын

  Did you use an O.E.M. starter or what is a good after market? Thanks for an excellent video

• 
  @MikeT4 ай бұрын

  I dont remember, sorry

• 
  @paparacas9 ай бұрын

  Thanks for video 😊

• 
  @MikeT9 ай бұрын

  You're welcome, glad it helped

• 
  @carlosnazareno61199 ай бұрын

  Igual a que eu tinha. Muito nova e confiável.❤

• 
  @Mrblockland10 ай бұрын

  WHAT IS THE BATTERY?

• 
  @USSHammerology10 ай бұрын

  Was that 50w Valvoline gear oil?

• 
  @pauljames485810 ай бұрын

  surely timing needs re doing after that!?!

• 
  @MikeT10 ай бұрын

  kzread.info/dash/bejne/a22qm9KNf9fPqdI.html

• 
  @rover100bunson11 ай бұрын

  sweet

• 
  @mariant737711 ай бұрын

  I' impressed by your stand.

• 
  @GR-pm2yc Жыл бұрын

  Would the screws not just go in directly without the use of a drill bit?

• 
  @MikeT Жыл бұрын

  To check out more of my work, visit facebook.com/Trainersturning/. Interested in buying a piece, check out what I have up on Etsy www.etsy.com/shop/MiJean123 use promo code "KZread" at check out and get 10% off

• 
  @MikeT Жыл бұрын

  To check out more of my work, visit facebook.com/Trainersturning/. Interested in buying a piece, check out what I have up on Etsy www.etsy.com/shop/MiJean123 use promo code "KZread" at check out and get 10% off

• 
  @MikeT Жыл бұрын

  To check out more of my work, visit facebook.com/Trainersturning/. Interested in buying a piece, check out what I have up on Etsy www.etsy.com/shop/MiJean123 use promo code "KZread" at check out and get 10% off

• 
  @jackaspen7655 Жыл бұрын

  Looks great

• 
  @MikeT Жыл бұрын

  Thanks

• 
  @jim_isf Жыл бұрын

  Great job fellas

• 
  @MikeT Жыл бұрын

  Thanks

• 
  @ginahardee4891 Жыл бұрын

  about how much would that cost this job on this particular ski?

• 
  @epmcguire9983 Жыл бұрын

  Thanks for the great service you have provided. Lightfoot

• 
  @jimwright404 Жыл бұрын

  I followed this video almost to the 'T' and everything went exactly as described on my '81 CB - thank you! And my shafts were well lubricated in the process:)

• 
  @MikeT Жыл бұрын

  Glad it helped

• 
  @jsmcguireIII Жыл бұрын

  I'm here now for my confession. After I let a kid start up my Kodiak for fun, it later refused to start. I checked everything - connections, switches, fuses, battery, grounds, relay, even regulator. NO LUCK. Then I sat on the quad and tried to remember what he might have done while sitting on it. Then I discovered a very small button I NEVER KNEW EXISTED under the starter switch - the engine kill switch. So after replacing the solenoid and almost submitting to a mechanic for help, I found the problem. The kid had hit that button by accident I never knew it. I told my wife I had finally found a loose plastic wire connector, so we'll leave it at that.

• 
  @TwoSmoker420 Жыл бұрын

  😂😂

• 
  @markcoleman31619 ай бұрын

  Never knew this existed either ... Thank you!

• 
  @nickstave5040 Жыл бұрын

  ? Why is it in neutral?

• 
  @MikeT Жыл бұрын

  Because it's hard to push when it's in park...

• 
  @Mystery7431 Жыл бұрын

  What are all the products you used?

• 
  @killerkork10 ай бұрын

  Yes we need the product names or a link

• 
  @jackaspen765510 ай бұрын

  @@killerkork He literally says what they are called and shows them. All you have to do is watch the video...

• 
  @arnaudgarriau9609 Жыл бұрын

  What are the products your yousing?

• 
  @jackaspen765510 ай бұрын

  He talks about them in the video.

• 
  @jasonjacobs2095 Жыл бұрын

  Can a small suv hatchback tow this boat? I have Honda crosstour

• 
  @gregoryball950411 ай бұрын

  Yes

• 
  @DougMilleratWoodSpunRound Жыл бұрын

  Great platter.

• 
  @MikeT Жыл бұрын

  Thanks

• 
  @jackaspen7655 Жыл бұрын

  Beautiful

• 
  @MikeT Жыл бұрын

  Thank you

• 
  @jackaspen7655 Жыл бұрын

  That grain is awesome

• 
  @MikeT Жыл бұрын

  Yeah its got some cool character

• 
  @bbustin1747 Жыл бұрын

  You didn’t want to take some q tips and clean the threads and area around the bezel ? I have the double tap. And I have some blue flakes floating around the crystal. Does the time element pop out easily access behind the crystal to remove those flakes ? Or do you recommend just having the watch repair do this ? Thanks. Nice watch anyways.

• 
  @smeggs07 Жыл бұрын

  I know this is a dumb question but how did you break it down