At the end do you have the window go all the way up with a single click then hold down the double click?
@Neil.Schell28 күн бұрын
Yes 👍🏼 hope the video was helpful!
@dead-phantom94743 ай бұрын
Thanks man
@ricardoaldana14568 ай бұрын
Mine seems to roll half way down when I do one click up in the programming phase, any ideas?
@fasteat1 Жыл бұрын
This was actually the best DIY video I've seen about this, can't thank you enough, I was actually considering removing the window glass but this made much more sense
@TheZoso25 Жыл бұрын
Thank you extremely helpful! Great video
@ezequielcosta954 Жыл бұрын
Thanks a lot for this excelent video! Cheers from Portugal!
@GL1TCH3D Жыл бұрын
Thank you so much for this video. I'm new to DIY maintenance of this level and this is exactly what I needed to repair my regulator.
@dancotube Жыл бұрын
Very clear and easy follow DIY, great work mate! ☺️
@bereketgebregzabiher1446 Жыл бұрын
Clear. My man. Bless
@OakInch Жыл бұрын
Used this for one of my windows. Thanks!
@y2kvitual Жыл бұрын
So I must be doing something wrong reference to this lil green clip. So after the replacement, the window will only go down using the key fob occasionally, but I can always put it up with window buttons. Any suggestions, its hot and need these windows to work. Thanks in advance.
@Neil.Schell Жыл бұрын
My best guess is that the green clip is not properly seated in the small hole through the window glass. The green clip locks into the hole and that allows it to pull the window down
@e90RI Жыл бұрын
Thank you for DIY it was easy to follow. All around perfect from start to finish .
@charlesharper63742 жыл бұрын
Wasup bro didn’t see the link for the regulator
@Persian99002 жыл бұрын
Perfect thank you bro 🌸🌺🌸🌺🌸
@KurtMidas15102 жыл бұрын
Open or close it with your keys and everything will be fine
@majumokhunga26612 жыл бұрын
Worked like magic. Thanks dudu
@hanibaskaronjr47292 жыл бұрын
Thanks bro seriously 👍🏼
@jondulake49772 жыл бұрын
Great video mate!! Made my job easy 👍
@tudickinson862 жыл бұрын
Thank you so much, I’ve been struggling with my window lol my husband replaced a regulator on my bmw 335i window and after that the window won’t stay up all the way keeps rolling halfway down. I tried this after watching your video and it works yay. It tools me 2 tried but still yay lol
@rationalpear18162 жыл бұрын
What is that foam block? Did this today, but the new part (which appears to be better designed in every way) would not allow the foam block to be installed. Said fuck it and threw it away.
@lucaquattrociocchi62372 жыл бұрын
how does it work even tho you coved it
@erenix39092 жыл бұрын
thx for the vid. how many miles on your e90?
@bradleyr0012 жыл бұрын
Great video, made this about a 20 minute job. Your attention to details and clear instructions were extremely helpful.
@mrk_deville64362 жыл бұрын
Thanks man straight forward super informative great video 👍🏼
@chrisdeathmetal83432 жыл бұрын
Merci beaucoup à vous !
@futuresensational23422 жыл бұрын
Thanks
@sneeuwwolf11762 жыл бұрын
Thanks! It was actually much much much easier then expected. Thanks. Cost me 34 euros to fix instead of 500 the dealer wanted.
@barbarablack96953 жыл бұрын
My son-in-law took a part out of the back door panel so we couldn't put the window up or down. After a week or so the window malfunction symbol came up and starting to beep every few minutes. Is there anyway I can stop the beeping sound until I can get it fixed? Thank You
@bobbywinston89323 жыл бұрын
Can you help me with mines are you in California
@conquerunderstanding75173 жыл бұрын
Thanks main! 😊
@jamesrichards96213 жыл бұрын
Can someone help? My window doesn’t go down when I press the button so does this mean that the motor is broken too?
@carlmyer53642 жыл бұрын
If you tell it to go down and you can hear the motor working but the window doesn't move, you just need to get that little green tab hooked into the window so it can pull it down
@northernwilli3 жыл бұрын
thanks for the useful info dude!
@nationsmostwanted3 жыл бұрын
I used a dorman motor regulator assembly but i could not get the reset.thing to work, i wonder if its a dorman issue or im not doing it right. It will work for a bit then all of Sudden doesnt like it loses its memory thing? I might try a new regulator and reuse same old motor
@pacovallejo92993 жыл бұрын
Thanks a lot for the video...just replaced the regulator and will program the window now !
@8grove3 жыл бұрын
That simple programming doesn’t work. I gotta pay 200 at the dealership
@lamrof4 жыл бұрын
Perfect man, you just saved me more than $300. I owe you a beer. Followed your guide all through and no issues what so ever. Big thumbs up !
@Neil.Schell4 жыл бұрын
Great to hear, lookin forward to that beer
@aengus19484 жыл бұрын
your video was very helpful, made the job a snap !tx
@JOSH29A4 жыл бұрын
Hey so not sure why but I replaced the regulator and motor with a brand new assembly and it seems like its not getting power, tried the main switch and the one on the door, so I'm not sure what the issue could be.
@staymedicatednyc3 жыл бұрын
Did you have to get the regulator initialized?
@MigySaan4 жыл бұрын
thanks bro💪
@atinoteintunovas99694 жыл бұрын
Thank you so much Caboose, I just saw the video and is great. That is what I'm going to do right now, well I need to buy the motor but I am pretty ready to do the job since all of the other parts are taken apart cause I had to replace also the actuator which I hated every time that I had to go drive. The noise it made was running me crazy but now is gone. take care amigo, it's been a pleasure looking at your video. Till next time!!! Good luck !!!!
@Neil.Schell4 жыл бұрын
Pepe Penalon Glad to hear you were able to get rid of that annoying noise! Thanks for watching and good luck with the repair 👍🏼
@Enigma87504 жыл бұрын
Great video. Your part about programming the window was a mystery to me. Thanks.
@yukimasaheppe10794 жыл бұрын
My windows goes down but does not seem to go all the way up
@bassandtrebleclef4 жыл бұрын
Dude, thanks very much for this video. I used it as a guide for replacing my passenger rear regulator and it worked like a champ. Cheers!
@igotoohard4 жыл бұрын
Thanks!!!!
@manixpc5 жыл бұрын
Really good video, nice and clear ty!
@Neil.Schell5 жыл бұрын
manixpc Great to hear, hope it helped!
@FunkOsax5 жыл бұрын
Hi. Just bought a used car and just noticed the top of the panel wasn't attached. The row of clips at the top of the panel, they just won't snap back in
@Neil.Schell5 жыл бұрын
David Burgess hey David! So if you are talking about the door panel it is pretty easy to get back into place. Look at 11:04 in the video and you can see the metal clips (on the door) and the plastic female clips (on the panel). Make sure they are lined up before you push them in. They take a little bit of force and sometimes a couple tries but do the top first. Hopefully this helps!
@FunkOsax5 жыл бұрын
freshcaboose thanks, will try again tomorrow morning (dark now in the UK). I appreciate you replying. Good video, very clear instructions from start to finish
Пікірлер
At the end do you have the window go all the way up with a single click then hold down the double click?
Yes 👍🏼 hope the video was helpful!
Thanks man
Mine seems to roll half way down when I do one click up in the programming phase, any ideas?
This was actually the best DIY video I've seen about this, can't thank you enough, I was actually considering removing the window glass but this made much more sense
Thank you extremely helpful! Great video
Thanks a lot for this excelent video! Cheers from Portugal!
Thank you so much for this video. I'm new to DIY maintenance of this level and this is exactly what I needed to repair my regulator.
Very clear and easy follow DIY, great work mate! ☺️
Clear. My man. Bless
Used this for one of my windows. Thanks!
So I must be doing something wrong reference to this lil green clip. So after the replacement, the window will only go down using the key fob occasionally, but I can always put it up with window buttons. Any suggestions, its hot and need these windows to work. Thanks in advance.
My best guess is that the green clip is not properly seated in the small hole through the window glass. The green clip locks into the hole and that allows it to pull the window down
Thank you for DIY it was easy to follow. All around perfect from start to finish .
Wasup bro didn’t see the link for the regulator
Perfect thank you bro 🌸🌺🌸🌺🌸
Open or close it with your keys and everything will be fine
Worked like magic. Thanks dudu
Thanks bro seriously 👍🏼
Great video mate!! Made my job easy 👍
Thank you so much, I’ve been struggling with my window lol my husband replaced a regulator on my bmw 335i window and after that the window won’t stay up all the way keeps rolling halfway down. I tried this after watching your video and it works yay. It tools me 2 tried but still yay lol
What is that foam block? Did this today, but the new part (which appears to be better designed in every way) would not allow the foam block to be installed. Said fuck it and threw it away.
how does it work even tho you coved it
thx for the vid. how many miles on your e90?
Great video, made this about a 20 minute job. Your attention to details and clear instructions were extremely helpful.
Thanks man straight forward super informative great video 👍🏼
Merci beaucoup à vous !
Thanks
Thanks! It was actually much much much easier then expected. Thanks. Cost me 34 euros to fix instead of 500 the dealer wanted.
My son-in-law took a part out of the back door panel so we couldn't put the window up or down. After a week or so the window malfunction symbol came up and starting to beep every few minutes. Is there anyway I can stop the beeping sound until I can get it fixed? Thank You
Can you help me with mines are you in California
Thanks main! 😊
Can someone help? My window doesn’t go down when I press the button so does this mean that the motor is broken too?
If you tell it to go down and you can hear the motor working but the window doesn't move, you just need to get that little green tab hooked into the window so it can pull it down
thanks for the useful info dude!
I used a dorman motor regulator assembly but i could not get the reset.thing to work, i wonder if its a dorman issue or im not doing it right. It will work for a bit then all of Sudden doesnt like it loses its memory thing? I might try a new regulator and reuse same old motor
Thanks a lot for the video...just replaced the regulator and will program the window now !
That simple programming doesn’t work. I gotta pay 200 at the dealership
Perfect man, you just saved me more than $300. I owe you a beer. Followed your guide all through and no issues what so ever. Big thumbs up !
Great to hear, lookin forward to that beer
your video was very helpful, made the job a snap !tx
Hey so not sure why but I replaced the regulator and motor with a brand new assembly and it seems like its not getting power, tried the main switch and the one on the door, so I'm not sure what the issue could be.
Did you have to get the regulator initialized?
thanks bro💪
Thank you so much Caboose, I just saw the video and is great. That is what I'm going to do right now, well I need to buy the motor but I am pretty ready to do the job since all of the other parts are taken apart cause I had to replace also the actuator which I hated every time that I had to go drive. The noise it made was running me crazy but now is gone. take care amigo, it's been a pleasure looking at your video. Till next time!!! Good luck !!!!
Pepe Penalon Glad to hear you were able to get rid of that annoying noise! Thanks for watching and good luck with the repair 👍🏼
Great video. Your part about programming the window was a mystery to me. Thanks.
My windows goes down but does not seem to go all the way up
Dude, thanks very much for this video. I used it as a guide for replacing my passenger rear regulator and it worked like a champ. Cheers!
Thanks!!!!
Really good video, nice and clear ty!
manixpc Great to hear, hope it helped!
Hi. Just bought a used car and just noticed the top of the panel wasn't attached. The row of clips at the top of the panel, they just won't snap back in
David Burgess hey David! So if you are talking about the door panel it is pretty easy to get back into place. Look at 11:04 in the video and you can see the metal clips (on the door) and the plastic female clips (on the panel). Make sure they are lined up before you push them in. They take a little bit of force and sometimes a couple tries but do the top first. Hopefully this helps!
freshcaboose thanks, will try again tomorrow morning (dark now in the UK). I appreciate you replying. Good video, very clear instructions from start to finish
Awesome video
Great vid! Let’s collaborate!