Пікірлер

• 
  @user-jz4cg9mk2e2 күн бұрын

  Привет , я из России , могу ли узнать твою почту для консультации ? Сам кузнец и очень хочу собрать пресс .

• 
  @dwayneburbridge328319 күн бұрын

  Well done!

• 
  @magedelsariakoussy907Ай бұрын

  Beautiful 👍

• 
  @johnjude2685Ай бұрын

  Saw this before, and it is a great system to copy I'm need smaller, but I'll try to copy the door system it great Thanks

• 
  @jyothisharma6721Ай бұрын

  Sar send ur phone number

• 
  @miklostoserd.8892 ай бұрын

  Megnéztem a válságban is!

• 
  @robert-oq9jq2 ай бұрын

  Outstanding

• 
  @Traderhood3 ай бұрын

  Cool.

• 
  @jayp81303 ай бұрын

  I don’t recommend this,but I never use the guard unless I’m using a cutting or sometimes a wire wheel.Like i stated “I don’t recommend” unless you trust that you have enough experience and trust your skills.Even I can have an accident but I’m prepared for the consequences.

• 
  @Temirchi_Elyor4 ай бұрын

  Zór 👍 menga sizni bu qurulmangiz juda yoqti. Sir bólmasa qancha mablağ kerak shundayni yasashga aytsangiz.🇺🇿 Elyor.

• 
  @Romas654 ай бұрын

  Excelente

• 
  @martynredfearn60544 ай бұрын

  Do you still have it?

• 
  @GnarledSage4 ай бұрын

  Amazing!! How much did you spend on this? How much did it cost on average?? How long did it take for you to make it?? I’m surprised at how well it is made.

• 
  @fitnesstempelfriedrichshaf82824 ай бұрын

  Hello Karl, With admiration I have followed the construction of your 40t forging press, as well as the recent video where you present the upgrades. In this video I can see a press with only one hydraulic cylinder in the background. Does it also have 40t pressing force? What is the difference to the press with the two hydraulic cylinders? Since I have been wanting to build a forging press myself for a long time, I have a question: Would you be able to put together a parts list for me, of course for a fee, which you decide according to your effort? Pump, Hudraulik hoses, hydraulic cylinders, metal thickness, etc., so that the parts harmonize with each other. Regards, Ulrich from Germany

• 
  @KarlMetalworks4 ай бұрын

  Hello. The press in the back of the video is a 25ton I made for sale. I can send you some parts list. You want to build a 25-25ton with one cylinder or a 40 ton? Are you on facebook or Insta ( for easier comunication, sending pictures?)

• 
  @trevorquinnell85154 ай бұрын

  dnt give up on it mate ya done better then most can keep going please 🙏

• 
  @BuildswithBrian5 ай бұрын

  Very nice work !!

• 
  @treadnokash75985 ай бұрын

  If i learned how to put engine on anything ill use it on everything

• 
  @ocnightflyer13595 ай бұрын

  Simple commonsense soloution right infront of my eyes that i did not see. Thanks bro!!

• 
  @TalRohan5 ай бұрын

  very cool, grinding off the edges of the twists gives it a really cool look ...finishes it very nicely Thanks for sharing

• 
  @victorpaul9046 ай бұрын

  🇮🇳💐🍁🌹♥️I love you steam engine 🌹🥰🥰👌🍁💐🇮🇳

• 
  @naoimportasva16996 ай бұрын

  Vapor e muito perigoso 💥💥💥 alta pressão de agua aquecida pode explodir como panela de pressão em uma bicicleta você ta sentado em cima de uma panela de pressão se explodir você será queimado vivo😬😬😬😬 preste atenção com essas Gambiaras

• 
  @6killer4267 ай бұрын

  This guy gave up on his bike because he said it lacked power. The two cylinder air compressor should have given it all the guts it needed. Just looking at the video, it occurs to me that his teeny-tiny piston valve probably isn't letting the engine breathe very well ... with a bigger valve (and a boiler capable of feeding it) that thing should have been overkill for a motorized bike. If you look at photos of Westinghouse engines (or Stuart Turner Sirius engines) having the same layout, you see a significantly larger valve.

• 
  @alimalatyr72207 ай бұрын

  Пек вадря .

• 
  @markothevrba7 ай бұрын

  That's why I remove the guard. Unless it's the cutting disc, those are scary, put the guard on for those.

• 
  @oldfarmer90047 ай бұрын

  No ! As long as you didn’t take it apart, you haven’t given up on it. Consider that you only are taking a break from it.

• 
  @moistandwhite26367 ай бұрын

  This is amazing! A shame I’m only seeing this 5 years later, I’m really impressed and I want one for myself

• 
  @johnjude26857 ай бұрын

  When there is no conversation about this build, I'd prefer mild music as my shop and garage give me plenty of shop noise. Just please let me know if sounds aren't for instructions I'm now seeing the progress is alsome, but I'm lost because I complain about the noisy video and giving thumbs down because of the noise I'm liking your hammer skills really nice Tommy Hawk but excuse me it a axe as thehandlemountfrombelow sonot a TommyHawk but really nice. please work on speaking to us and cutting the shop noise as my family doesn't like it either. But yeah you are a Smith with skills so let see more I subscribed

• 
  @johnjude26857 ай бұрын

  Off setting on anvil height seems dangerous around my belly Be careful

• 
  @antaltali98917 ай бұрын

  Mr. Kawasaki?

• 
  @gary247527 ай бұрын

  I am curious if there would have been any advantage to folding the rod to get layers in the very beginning?

• 
  @cowboyyoga9 ай бұрын

  Super! Another great video! )))

• 
  @cowboyyoga9 ай бұрын

  Really cool ! Thanks for sharing ))) It's a great idea! )))

• 
  @cowboyyoga9 ай бұрын

  Hi Karl ! Super press! And a super video! Are you open to doing some consulting if I take on building a press close to yours? It will be my second press to build, but first with a hydraulic pump. And heck... no need to apologize for your English. It's super! I wish my Russian was that good! ))) Every year it gets a bit better!

• 
  @tootarded4tv8099 ай бұрын

  Omg haha this is great thx

• 
  @GoingtoHecq9 ай бұрын

  You looked cool riding on it. That's as good as it gets for bikes like this. I am glad the open flame box didn't melt the front tire though.

• 
  @kimsutton226810 ай бұрын

  What color did you temper the metal at

• 
  @mathiasandersen340110 ай бұрын

  I have question. Do you remember what the boiler pressure was?

• 
  @matoko12310 ай бұрын

  The first thing I do with a new small angle grinder is remove the guard. I find them a nuisance. I have had a couple of injuries though :(

• 
  @guthmanb10 ай бұрын

  I had a lot of old pipes and rebar to cut up and from what I read kzread.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.

• 
  @robertmillard440810 ай бұрын

  Hi great build ! What were the specs of the rams you used and does doubling the rams equal double the pressure ? I would think so but have been caught out before with assumptions lol Cylinders are so expensive here in the uk.. a 5” bore 2” piston here is £1000!! Crazy money I’m now thinking of a 2 ram design as it may be cheaper as the rams would be smaller and easier to source new or second hand

• 
  @russianotter10 ай бұрын

  Well hot dang, it's like they were designed to actually be used this way and I've just never known.

• 
  @ironblacksmithing34010 ай бұрын

  Good

• 
  @BillLowenburg11 ай бұрын

  Thanks, this will come in really handy!

• 
  @Sigma-sj7mq11 ай бұрын

  Very smart!

• 
  @miroslavzima885611 ай бұрын

  Kdo může ale zase říct : Jel jsem na parní motorce. I když nebyl motor dost silný, projekt to byl úspěšný. Asi bys zamotal hlavu policii (nebo musel ukázat, že máš řidičák na lokomotivu :D ) Parádní projekt!

• 
  @user-ik3qh4ve5b Жыл бұрын

  Очень продуманная конструкция.

• 
  @chickenzzzzzzzzz Жыл бұрын

  Ladies and Gentlemen: The European inventive spirit that created the greatest empires on the planet

• 
  @vitaliykramarenko8131 Жыл бұрын

  👍🔱🇺🇦

• 
  @pawelo2698 Жыл бұрын

  Hello. What shapes are impossible to get on hydraulic press?

• 
  @ikosparintis8742 Жыл бұрын

  🤝🤝🤝🤝👍