The 4tec is meant as a box stock class for onroad racing, not speed runs. So you know...
@nealstarling5422Ай бұрын
Hey Brew, did you by chance take the pinion gear off and attempt to see how for your 4tec can free roll ? Mine, not so good, but I fixed that 👍 Oh I did😳
@Subboxstoker3 ай бұрын
I run mine with a castle 5700kv and mamba x esc it rips and does not get warm
@JesseBlum3 ай бұрын
What battery and amp you use?
@acecapone80863 ай бұрын
Gotta bring your toolkit man.💯
@cccspokesmanandcofounder4 ай бұрын
Considering you have a huge battery in it, that likely adds almost another pound, but gives you no more voltage, only longevity. A stock 3s 5000mah battery is MORE than enough, especially if you’re doing speed runs. I have NO idea why you’d have that big battery in there, if you were complaining about weight. You’re not gonna go any faster with 6700mah of 11.1v than you will with 5000mah of 11.1v. Besides that, I’ll agree with the rock issue.
@maszkalman367616 күн бұрын
He did that on puropse so he can błtch about it...
@cccspokesmanandcofounder4 ай бұрын
7:31 Yea, but at the least you have a great son!
@enricomiceli55174 ай бұрын
rock problem can be resolved with dust guards and dirt guards. the evxl combo is stupid hugenand unecessary big in my opinion.
@kevingalea924 ай бұрын
I think it needs to bind again and that's a sweet esc man
@allscalerc4 ай бұрын
Great video. I just subscribed to your channel. 👍👍👍👍
@kingsransomsilver37124 ай бұрын
That looks like airlift
@SkunkWorks20015 ай бұрын
What body is that you did the power was on?
@robertruiz54176 ай бұрын
On the. 3.0 chassis it fit fine
@michaelrajca60436 ай бұрын
what brand of tires are those and where can i get them. i have a 4tec vxl 2.0
@WigglesTTH6 ай бұрын
The RS4 sport is even worse with the pebbles. It was almost undrivable
@SimeonSales6 ай бұрын
Those 3500kv motors get hot in general I had one in my raptor r it ran hot so much I got rid of it
@budmansdragracingchannel272611 күн бұрын
Yea the vxl motors run hot.
@TheTylerjoy048 ай бұрын
How Many Degrees Did You Run Your Soldering Station @? I Have Something Like It.. But Mines Still Having As A Hard Time Soldering It To The Connectors I Have To Wait For A Loooong It Order To The Wires To Connect To The Connectors..😬
@EdwinPerez-md4nm8 ай бұрын
You beat that rc up!! 😂😂🔥🔥
@alantaylor3538 ай бұрын
The RS4 Sport 3 has the same problem with rocks...
@DarkSpice849 ай бұрын
You make valid points but the weight segment felt like a really weak argument. Its hard to argue "only 2 pounds difference" when in reality the infraction is 63% heavier. Context is everything.
@WiIdFx10 ай бұрын
Over the years? 20? 30 years?
@cjchannel12RC11 ай бұрын
Cool video and some useful info since i might be buying a 2nd one i had a Ford GT model before i traded it away with a couple other cars for an X-Maxx. But this time i might get another brushed one and mod it into a VXL one or get a VXL one from the start. I currently have an XO-1 and a Rlaarlo AK-917 carbon chassis version.
@patrickm203111 ай бұрын
Still waiting for the follow up 😢
@user-rx8qq8sk9ydv1ce5ib11 ай бұрын
Weight is important to keep the car stable controllable. Light weight will make it out of control and feel like a cheap toy. I prefer heavy cars of course provide it have the right setup
@UnrivaledPiercer11 ай бұрын
I don't know if you reply to comments often but I had a question I can't really seem to find online. I was looking at buying a 4 Tec 2.0 but one of the common criticisms I've seemed to find is that the rear wheel offset isn't standard without using the stock wheels. From what I can tell from your video (I don't currently know a lot about the car so I may be wrong) you aren't using the stock wheels but it seems like your front and rear track width is the same? From my understanding the 4 Tec 1.0 had the same offset front and rear, but the 2.0 doesn't. I've seen one video on KZread of someone removing the rear hex's and adding wider hexes from a Stampede, but apparently that doesn't give enough width to allow standard touring wheels on the rear. I can't really see a lot of people commenting on the issue but I guess that's because this chassis isn't raced, and if it is, it seems to be with stock setups. I'm just curious what my wheel and tire options would be before I buy one, so I managed to find this "issue" before I bought anything thankfully. What did you do to the rear of your car to widen it if I may ask?
@EDChero24 күн бұрын
@UnrivaledPiercer did you ever figure this out? I would also like to know 👀
@maszkalman367616 күн бұрын
On 4-tec 2.0 the offset is bigger on the rear....
@N_Fortune11 ай бұрын
What tires are you using? Can you keep it straight using the stock tires? I've seen some just spin in circles when it's up to speed...
@drawingslim11 ай бұрын
Wing is holding back a couple mph if you have the gearing
@ja563911 ай бұрын
I hit 90 and still had some left. Stock internals, 48t/41t. No mod1 necessary.
@What_Say_You11 ай бұрын
Hey, why stop at just 90? If ya ain't got any proof, just say 190, 290, etc., 🤨 or let's see some video for these outrageous claims my friend!
@jalee6587 Жыл бұрын
Traxxas transmitter or horrible they use some kind of grease that makes the trigger and steering sticky not smooth.
@jalee6587 Жыл бұрын
Take the battery out and weigh it. The total weight all depends on the battery so take that out of the equation.
@MyRcGoSlow Жыл бұрын
Happend to mine bro when I turned the wheels it would accelerate lol it’s was connected wrong in the channels esc bro they had lights in it and didn’t connect them back up properly and just sold the slash too me and I figured it out
@MyRcGoSlow Жыл бұрын
Post links bro for the stuff u recommend so u can earn $$$ from the links bro Amazon hooks u up
@MyRcGoSlow Жыл бұрын
Keep the videos coming bro
@MyRcGoSlow Жыл бұрын
Damm just picked up a 4tec 2.0 for 130 plus 30$ in shipping 160 vxl motor let’s see how it goes subscribed
@kerrybryant2517 Жыл бұрын
Is that the stock gearing?
@PlayWitIt Жыл бұрын
Nice… what kind of Foams are those?
@justinfurman9267 Жыл бұрын
if thats a traxxas receiver switch the port your steering servo is plugged into, try the other ch1
@skrapz79 Жыл бұрын
Calibration eliminates humiliation 😂 i did same shit was so confused till i smoked a doobie n voila 😂
@skrapz79 Жыл бұрын
My hpi loves rocks i call it a crackhead constantly fuggin my steering up i hava idea 4 that tho n it will work ...... I hope 😂
@jeremypike9153 Жыл бұрын
I had a nitro 4tec probably 12-15 years ago. Back then they were still using a metal chassis.
@benburnett2159 Жыл бұрын
Same
@jbsghosthuntingandotherhobbies Жыл бұрын
Nice i 2 4-tecs Nitro and the 2.0 Brushless very cool new sub here
@jimgenius8856 Жыл бұрын
It looked like the radio needed to be recalibrated. Probably didn't need a new esc
@206beastman Жыл бұрын
Take off the body or cut the back window out
@keshajohnson4403 Жыл бұрын
What tires are these
@EJ-74 Жыл бұрын
That's pretty damn impressive for 3S and a cheap motor. 👍🏻 Lucky you found that GPS 😆
@dirtysoufracing6029 Жыл бұрын
Like the Georgia bulldogs sign u in ga
@stevelamonte1962 Жыл бұрын
I have the supra where did you find the bodies you have
@brew2lrc Жыл бұрын
I found this one on horizon hobby
@yinvelocius Жыл бұрын
My arrma vendetta is 10lb
@jalee6587 Жыл бұрын
No they are 5.8lbs definitely not 10lbs
@rickyjackson5160 Жыл бұрын
And second you probably got stuff the Shocks it bounces
Пікірлер
This is the foxbody guy
The 4tec is meant as a box stock class for onroad racing, not speed runs. So you know...
Hey Brew, did you by chance take the pinion gear off and attempt to see how for your 4tec can free roll ? Mine, not so good, but I fixed that 👍 Oh I did😳
I run mine with a castle 5700kv and mamba x esc it rips and does not get warm
What battery and amp you use?
Gotta bring your toolkit man.💯
Considering you have a huge battery in it, that likely adds almost another pound, but gives you no more voltage, only longevity. A stock 3s 5000mah battery is MORE than enough, especially if you’re doing speed runs. I have NO idea why you’d have that big battery in there, if you were complaining about weight. You’re not gonna go any faster with 6700mah of 11.1v than you will with 5000mah of 11.1v. Besides that, I’ll agree with the rock issue.
He did that on puropse so he can błtch about it...
7:31 Yea, but at the least you have a great son!
rock problem can be resolved with dust guards and dirt guards. the evxl combo is stupid hugenand unecessary big in my opinion.
I think it needs to bind again and that's a sweet esc man
Great video. I just subscribed to your channel. 👍👍👍👍
That looks like airlift
What body is that you did the power was on?
On the. 3.0 chassis it fit fine
what brand of tires are those and where can i get them. i have a 4tec vxl 2.0
The RS4 sport is even worse with the pebbles. It was almost undrivable
Those 3500kv motors get hot in general I had one in my raptor r it ran hot so much I got rid of it
Yea the vxl motors run hot.
How Many Degrees Did You Run Your Soldering Station @? I Have Something Like It.. But Mines Still Having As A Hard Time Soldering It To The Connectors I Have To Wait For A Loooong It Order To The Wires To Connect To The Connectors..😬
You beat that rc up!! 😂😂🔥🔥
The RS4 Sport 3 has the same problem with rocks...
You make valid points but the weight segment felt like a really weak argument. Its hard to argue "only 2 pounds difference" when in reality the infraction is 63% heavier. Context is everything.
Over the years? 20? 30 years?
Cool video and some useful info since i might be buying a 2nd one i had a Ford GT model before i traded it away with a couple other cars for an X-Maxx. But this time i might get another brushed one and mod it into a VXL one or get a VXL one from the start. I currently have an XO-1 and a Rlaarlo AK-917 carbon chassis version.
Still waiting for the follow up 😢
Weight is important to keep the car stable controllable. Light weight will make it out of control and feel like a cheap toy. I prefer heavy cars of course provide it have the right setup
I don't know if you reply to comments often but I had a question I can't really seem to find online. I was looking at buying a 4 Tec 2.0 but one of the common criticisms I've seemed to find is that the rear wheel offset isn't standard without using the stock wheels. From what I can tell from your video (I don't currently know a lot about the car so I may be wrong) you aren't using the stock wheels but it seems like your front and rear track width is the same? From my understanding the 4 Tec 1.0 had the same offset front and rear, but the 2.0 doesn't. I've seen one video on KZread of someone removing the rear hex's and adding wider hexes from a Stampede, but apparently that doesn't give enough width to allow standard touring wheels on the rear. I can't really see a lot of people commenting on the issue but I guess that's because this chassis isn't raced, and if it is, it seems to be with stock setups. I'm just curious what my wheel and tire options would be before I buy one, so I managed to find this "issue" before I bought anything thankfully. What did you do to the rear of your car to widen it if I may ask?
@UnrivaledPiercer did you ever figure this out? I would also like to know 👀
On 4-tec 2.0 the offset is bigger on the rear....
What tires are you using? Can you keep it straight using the stock tires? I've seen some just spin in circles when it's up to speed...
Wing is holding back a couple mph if you have the gearing
I hit 90 and still had some left. Stock internals, 48t/41t. No mod1 necessary.
Hey, why stop at just 90? If ya ain't got any proof, just say 190, 290, etc., 🤨 or let's see some video for these outrageous claims my friend!
Traxxas transmitter or horrible they use some kind of grease that makes the trigger and steering sticky not smooth.
Take the battery out and weigh it. The total weight all depends on the battery so take that out of the equation.
Happend to mine bro when I turned the wheels it would accelerate lol it’s was connected wrong in the channels esc bro they had lights in it and didn’t connect them back up properly and just sold the slash too me and I figured it out
Post links bro for the stuff u recommend so u can earn $$$ from the links bro Amazon hooks u up
Keep the videos coming bro
Damm just picked up a 4tec 2.0 for 130 plus 30$ in shipping 160 vxl motor let’s see how it goes subscribed
Is that the stock gearing?
Nice… what kind of Foams are those?
if thats a traxxas receiver switch the port your steering servo is plugged into, try the other ch1
Calibration eliminates humiliation 😂 i did same shit was so confused till i smoked a doobie n voila 😂
My hpi loves rocks i call it a crackhead constantly fuggin my steering up i hava idea 4 that tho n it will work ...... I hope 😂
I had a nitro 4tec probably 12-15 years ago. Back then they were still using a metal chassis.
Same
Nice i 2 4-tecs Nitro and the 2.0 Brushless very cool new sub here
It looked like the radio needed to be recalibrated. Probably didn't need a new esc
Take off the body or cut the back window out
What tires are these
That's pretty damn impressive for 3S and a cheap motor. 👍🏻 Lucky you found that GPS 😆
Like the Georgia bulldogs sign u in ga
I have the supra where did you find the bodies you have
I found this one on horizon hobby
My arrma vendetta is 10lb
No they are 5.8lbs definitely not 10lbs
And second you probably got stuff the Shocks it bounces