Dear viewers, since the latest family firmware update ABPM.6C0 the VMG86XX Family including the VMG3625-TXX can support 3 different Wireless operation modes: Router, Access Point (AP) and Repeater. You can set this in the wireless menue. It will also change the device functions in case you change it, so we aware that only ONE mode is possible. The VMG86XX models can co-work with repeaters from the WiFi6 series like WAPXXXX also working in WiFi6 mode (802.11ax) There will be a new data sheet for the series available under sp.zyxel.com

@FearlessFrog

Жыл бұрын

I have fiber modem at home which is ZTE wifi6 modem. I want to connect the 3625-t50b to it wirelessly and from there, I want to spread the wireless broadcast from the modem in order to expand the wifi network. The 3625 has the latest firmware installed. After marking it as repeater option in the wireless operation menu, the device restarted and I pressed the onboarding button. In the meantime, I pressed the wps button of the fiber ZTE modem. Both devices saw each other. Connected. So the internet on ZTE came to 3625 wirelessly. I used the internet when I connected the 3625 to the pc via cable.IT’s ok. 3625 did not turn on wireless broadcast after doing all these operations. I mean as wireless repeater 3625 just transferred the internet as wireless from ZTE and transferred to the PC via wired. I went to 3625's interface again, looked and wifi options were off. I made It ON. But then the repeater feature disappeared, even though I enabled the wireless option, it was not visible when I looked at the wireless networks from my pc. At the end of the job, all the lights went out except the top left power light on 3625 and I reset it. In short, I have come so far. Anyone have experience and success with this issue? I don’t want to go and pay for a wireless repeater 😊

@ZyxelSupportCampus

Жыл бұрын

@@FearlessFrog please consider WiFi system such as MULTY M1 for this, which is specially for the enhancement of a network WiFi and offers this function with no tricks.

cant find video about usb sharing setup for this modem

Hi can my Zyxel routers prevent switch from connecting to the internet?

Hi. If the router isn't allowing you to access the admin page for setup. What does that mean ?

@ZyxelSupportCampus

2 жыл бұрын

Hi, this means the device is controlled by your Provider and does not allow user access to the configuration.

How do I connect the Zxyel to the VIZIA UPS Multi-Output 5V & 12V Battery Bank

@ZyxelSupportCampus

3 жыл бұрын

Dear Jeneshri, make sure the device voltage and ampere values of the secondary power connection meets exactly the value of the power bank. If they have not equal value the device can be damaged. You may need to manufacture a cable that connects both by hand. The operation by battery is not supported, as we suggest to use the standard mains power network.

Hello, how can i turn off the lights on Zyxel VMG3625-T50B, while wifi is running?

@ZyxelSupportCampus

Жыл бұрын

Hi Pexactor_, there is no such button or function the lights stay dimmed on all time.

I have two of these modems: EMG3525-T50B How can I bridge it wirelessly so that I can have an access point in another part of my house?

@ZyxelSupportCampus

2 жыл бұрын

There is an inofficial way if you disable routing and DHCP on one device and then connect it by LAN to LAN port with a cable. There are many devices that can reeat and extend your wireless on a better way. Multy series and the new WiFi 6 AP NWA50AX for instance can do much better and faster. Please consider to us a repeater rather than doing the back2back configuration.

i have exact the same wifi, should i do exact the same settings as you did for the best wifi?

@ZyxelSupportCampus

3 жыл бұрын

Hello Mohamed, if you follow the settings example and it shows the same channels are available, then yes, go ahead! :)

I can't map the hdd when I connect it to the USB port of the zyxel.i did the map network drive procedure. Please help

@ZyxelSupportCampus

2 жыл бұрын

Dear MrTeob1, please get in touch with your provider, the reseller or our support team. You can contact us on the local website support.zyxel.eu

Hi I need a replacement power cable for the router, can you please let me know which I need to buy?

@ZyxelSupportCampus

2 жыл бұрын

Hi Pabi, there is no specific part number for this power unit, so you need to purchase same product with AC/DC value of Volt, Ampere and the diameter of the second source plug to the device. Maybe we can offer one on the spare part shop. Depending on your resident country, please check support.zyxel.eu and then the segment warranty.

I have trouble with my router, same model as shown in the video. How can I share USB Hard drive over the network ? the router have a USB port, I connected a external drive, but need to access that drive on a external network. it give me the path. is the path only for local or can it also be used for network sharing

@ZyxelSupportCampus

Жыл бұрын

Hi Riaan, basically it is for network internal use only. If you really want to share the drive to the internet, you need to apply a firewall rule and a port on which users from your WAN IP can reach the drive. Because this WAN IP may change, you should use a Dyn-DNS service. A cloud drive with which you may share the data on your harddisk is more secure and also gives you a backup option. Please check for Drop Box or any other services that offer cloud based storage. You can use a NAS, which offers this service more comfortable to share data than simply the USB host of your IAD.

Hi, this model has cellular backup function with Check Cycle and Consecutive Fail settigs for usb dongle connection. So is it possible to set such parameters for adsl connection if I want to use it as a backup and a WAN connection as a main one? By default it takes approximately 75 seconds to switch, too long.

@ZyxelSupportCampus

2 жыл бұрын

Dear a man, the WAN Backup by LTE is setup with a ping check on the xDSL WAN and if the timeout is 3x 10 Seconds the LTE WAN is activated. If you require faster or permanent backup, you should consider to use a security gateway with two WAN ports that can be configured as fall over WAN.

@Aman-dr4yl

2 жыл бұрын

@@ZyxelSupportCampus Thanks for the reply! Could you recommend some model for permanent backup with 2 WANs, if there's one for home users? (I mean not very expensive)

@ZyxelSupportCampus

2 жыл бұрын

@@Aman-dr4yl my suggestion is USG FLEX 200 with Bundle license: www.zyxel.com/en/uk/products_services/USG-FLEX-Firewall-USG-FLEX-200/

i can't enable Qos in my router vmg3625-t50b downstream and upstream not appearing and appear this message (If Upstream Traffic Priority is selected, 4 level strict priority QoS will be applied automatically according to the selected criteria. In this mode, user manually defined QoS will not be applied until Auto-Priority Mapping is disabled.)

@ZyxelSupportCampus

2 жыл бұрын

Hi, the QOS is a sensitive setting, because the traffic for Phone and possibly can also affect IP-TV settings if they are provided from your Internet Provider. Please check, if these settings affect some of their services. Also these can be blocked by your provider in your device. For the rest the message says everything: you can let the upstream traffic prioritize by four preferred criteria or you switch off this automatic function and then your manual QOS goes in. Please check the user manual for this settings.

my new Zyxel VMG3625-T50B router doesn't work as intended for some reason the the dsl and internet led lights dont light up and if it does the dsl just flashes for a bit and then stops completely but the old router works perfectly fine but it has bad wifi range that's why i got a new one can you explain to me how i can fix this issue

@ZyxelSupportCampus

2 ай бұрын

Dear @bluegate4630 please make sure you have the correct Annex and the DSL line is active. If you use a splitter for phone connection, please remove it. Check with your provider which xDSL line you have and the router must be compatible with it. We are happy to help you on support.zyxel.eu

Can't connect to the wifi with my ip camera, only through the ethernet cable. What settings do i need to change? Model VMG4927-B50a. Camera worked with my old router.

@ZyxelSupportCampus

2 жыл бұрын

This is probably the issue: your camera is not able to connect to the N-WLAN of the router. But without knowing any model details is just a guess. Try a firmware update of your camera and check the ports and security settings that the camera needs

How to enable WDS on this router or similar function for wifi extending as access point?

@ZyxelSupportCampus

2 жыл бұрын

Dear Mohamed, this device does not support a "WDS" function with a WiFi 6 extender, but you can use any of our Extenders to repeat the network: www.zyxel.com/products_services/home_connectivity-wifi_extender.shtml?t=c Best option in a very crowded house can also be PowerLine, see our latest video. Or you use instead of the weaker WiFi of this device a WiFi6 Mesh System like Zyxel Multy.

I have a ZYXEL EMG3525-T50C working well I'm trying to connect my repeater but it wont

@ZyxelSupportCampus

6 ай бұрын

Hi, the repeater can only be a real repeater that connects as client to the WiFi of the Router. It does not mesh. Please contact our support.zyxel.eu for assistance.

hi there's a problem, The model i have doesn't show the Login name and The password on the backlable.

@ZyxelSupportCampus

3 жыл бұрын

Hello from Ally, the device can be customized from your provider and have a unified login as default or it is a generic device, where the login is stated in the quick start user guide. The SSID that the device send out is visible in your devices. If you can't find any WLAN credentials, you need to login to the device and change them. Remember to reset your device if you get no access and start with the standard value again to configure the device.

Tengo el modelo ruter Zyxel vmg8825-t50 1. ¿Le puedo incluir una tarjeta SIM? 2. Si se puede, ¿qué procedimientos tendría que seguir? 3. Después de incluirle la tarjeta SIM, ¿ese ruter pasaria a ser un ruter 4G o no tiene nada que ver?

@ZyxelSupportCampus

2 жыл бұрын

Sorry 3x nada. You can use a LTE Dongle on the USB hub for WWAN backup by LTE.

I have the EMG3525-T50B and I am very happy so far. I have 2 questions. 1) Do I have to update the Firmware manually? and 2) Can I use the Router to connect to ExpressVPN or NordVPN ?

@ZyxelSupportCampus

2 жыл бұрын

Hi Jerome, the firmware update will be initiated by your provider or you can check for newer versions inside the GUI of the device under maintenance. Please ensure the version has the same letter combination in round brackets ex. (ABPN.x) You can connect to software VPN systems with the clients that are connected to the IAD, but it is not possible to have a solid configured connection between the IAD and the NordVPN system. The connection must be established by the client.

@jeromegudgeon

2 жыл бұрын

@@ZyxelSupportCampus Thanks for the reply. Thats a real shame as I take security very seriously and would be good to connect to a VPN so that all devices are automatically covered. Perhaps you could consider this as a future product as other IADs support it.

@ZyxelSupportCampus

2 жыл бұрын

@@jeromegudgeon the IAD are sold world wide and their basic function is to connect to the internet with different providers and service a wide range of customers. Also the customer expect a reasonable (low) price. Any special function like the VPN connectivity of the device means a limitation or additional configuration, test and compatibility. So we keep the security level of the device to major functions. If you need higher security to protect your business date, we suggest you to take a look to our firewall series. Special the Zywall USG FLEX series. They can handle any requirement for security of a modern network.

how do you log into the interface on google it always says for me this site can’t be reached what do i do?

@ZyxelSupportCampus

Жыл бұрын

Hi, the router comes from a provider in case you are not able to log in. This means you need to accept the settings and configuration as long as you use the device with your current broadband contract. If the device is set to "Bride" there is no website to log in and the device must be set back to normal router modus by long reset >12 seconds.

Is there a firmware update for the EMG3525-T50B

@ZyxelSupportCampus

2 жыл бұрын

This comes from your provider or if you have a generic device from support.zyxel.eu

How can I manage the troubleshoot which unconnecting network?

@ZyxelSupportCampus

3 жыл бұрын

Hello Mokhlaroyim Shomurodova, first you need to check where your network has interruptions. Is the DSL or (W)LAN connection interrupted? Please check if other clients have the same issue and which status on LED is shown.

I need a firmware update file for VMG3625-T50B

@ZyxelSupportCampus

2 жыл бұрын

Hi Orashio, this depends on the device. If you use the generic version, please check our support portal. If the device is given by your internet provider you need to ask them for the update. This simple devices do not need an update so frequent, so don't expect too much update options.

Having trouble with this one. The 5g wifi signal didnt blink. Restart many times also cannot solve the problem. Care to share the solution?

@ZyxelSupportCampus

2 жыл бұрын

Hi Rosna, please check if there is a Military or Government facility in your area, who may block the channels of the 5 GHz WiFi. If not the device may have an issue and need warranty check and service.

When I installed the router the globe light was red and never changed how do I fix it?

@ZyxelSupportCampus

3 жыл бұрын

Hello Morris, Globe LED "red" means your credentials towards the provider or the encapsulation are not correct set to the device. You should have a letter from your provider that exactly tells the encapsulation (ex. PPPoE) and the user name and password for your access.

Does the Zyxel EMG3525-T50B have a mobile app?

@ZyxelSupportCampus

Жыл бұрын

Hi Uncle Baboon, no there is no App that can be used with this device.

It is possible to update the software for this router, username, or password zyxel vmg3625-t50b

@ZyxelSupportCampus

Жыл бұрын

Hey, user name is mainly "admin" and PW is on the backside written. if not it is always "1234" in factory mode. If this does not work you may have a SP device that does not allow login or you don't have the corrent PW and need to reset the device to get back to factory default. Then you need to set up the device again. 😔

Do I need to use a laptop or pc for this to work

@ZyxelSupportCampus

2 жыл бұрын

Hi Katlego, any device that can access the LAN or WLAN and can open an internet browser will do.

Como eu faço para colocar algum dispositivo na DMZ com esse router ou reencaminhar porta

@ZyxelSupportCampus

2 жыл бұрын

You asked: How do I put some device in the DMZ with this router or forward port? You can add only one device to the DMZ and here is the article that helps: Portforward => support.zyxel.eu/hc/en-us/articles/360001432480-Portforwarding-on-an-AMG-VMG-device-

I want to know if the VMG3625-T50B router supports WDS feature, and if it supports the feature, how can this router be connected with a repeater or access point

@ZyxelSupportCampus

2 жыл бұрын

Dear Khaled, no it does not support WDS. To extend your wireless among the house we suggested several devices in our former videos: WAP3205 V3, WREseries or the best you can get: Multy X WLAN series. Please have a look to our channel and let you inspire from the options.

@Dr.Geek-ZA

2 жыл бұрын

So in essence EMG3525-T50B also lacks this feature. It shows -useless- device its really is.

@ZyxelSupportCampus

2 жыл бұрын

@@Dr.Geek-ZA the feature "useless" is not valid in this case, because more than 75.000 installations in the world on private networks shows, that many customers are satisfied with the product. If it does not fit your needs, maybe connect with a technical agent at support.zyxel.eu and find the better solution. To add a wider wireless area we have the NWA50AX access point, that can flawless work together with this internet access device. You need to be fair and see for which proposal and market the product is designed for. Thanks.

@Dr.Geek-ZA

2 жыл бұрын

@@ZyxelSupportCampus Oh, I am sorry, it's not useless. Let me rephrase, it lacks a feature that would give the product better value/flexibility to a customer.

@ZyxelSupportCampus

2 жыл бұрын

@@Dr.Geek-ZA that sounds better. The reason for this is that Zyxel offers this product mainly to Service Provider world wide and the pice is the main subject to sell in the big quantities. But we also have IAD products that can service WDS on WiFi6 which is the VMG8xx series. We also have published a video about the product. Thank you for watching the videos! Best regards, Horst

Hi I just got a new modem this week. It seems to have a strange problem that has happened a few times since i got it. My device says internet not available then when I go to the Wi-Fi settings it's only showing me the 2.4 gigahertz Channel when I look at the modem it's showing me both channels are green light I don't even turn off the modem and turn it back on I just wait a few minutes and usually my device will reconnect to the 5 gigahertz Channel I only have a few devices on the channel any idea why it would be doing this the device I'm using for the internet is pretty new never had this happen before

@ZyxelSupportCampus

2 жыл бұрын

Dear @The Foreigner, the 5GHz WiFi can be influenced by military operation using the channels of the WiFi for their application. The device need to check if the channels are available and free, while doing this the 5GHz may be not working or slow working. Check if you can place the device on a different location. If the problems remain and you have no such military facilities / embassy / space research in your area, please let the reseller check the device and possibly swap it.

@StAnger561to770

2 жыл бұрын

@@ZyxelSupportCampus yeah it's okay I'm out in the countryside and there's no facilities like that around here but I've noticed when I turn the device on that sometimes the 2.4 Channel seems to pop up first I always turn my Wi-Fi off at night I find that I sleep better that way and there's no need for me to keep it on while I'm sleeping

@StAnger561to770

2 жыл бұрын

But thanks for the answer I appreciate you getting back to me

Can I get information about chipset?

@ZyxelSupportCampus

2 жыл бұрын

Dear Veysel the letter B after the number 50 indicates that it is build on a Broadcom Chipset.

What’s the maximum number of WiFi connected?

@ZyxelSupportCampus

3 жыл бұрын

We suggest 30 clients but this is also depending on your internet speed. Connect clients by LAN UTP cable to keep your WiFi speed up.

Hi im having some problems with my Zyxel router, my iternet light gets red about every a couple minutes and after a couple seconds gets back to green ,and it keeps repeating

@ZyxelSupportCampus

Жыл бұрын

Hi Miaou, this is an issue with account verification that has its root cause in the encryption. Please check if you set the WAN account settings towards your internet provider correct.

@Miaou_-cq3yv

Жыл бұрын

@@ZyxelSupportCampus Can you Guide me please how can i check

i need to upgrade the firmware ; how to download firmware file?

@ZyxelSupportCampus

Жыл бұрын

Hi, if your device is coming from your internet provider, please get in contact with them. If you bought the device free in the market in EMEA, please check with support.zyxel.eu team

How do I mount this on the wall

@ZyxelSupportCampus

2 жыл бұрын

Hi Wade, this is simple. Just use the plugs and screws that come with the device and the oval holes on the top rear side to fix it on the wall. Make sure to use the stand of the device so the cables have space in the ports.

my internet light is red, how do i fix this?

@ZyxelSupportCampus

Жыл бұрын

This could have two issue; you used the wrong encryption (PPP, PPPoe, PPTP,...) and/or username and password. The other option is that the provider shut down the line or your account is not activated. In both cases you get help from your provider.

The internet light is not getting on. What should I do?

@ZyxelSupportCampus

3 жыл бұрын

1. Check if the connection is correct (xDSL or blue WAN) 2. Check if DSL you have activated the correct profile that matches with your providers settings 3. Globe LED keeps flashing? Possible used the wrong version for the device, Annexes A or B 4. send your request to support.zyxel.eu

@ZyxelSupportCampus

3 жыл бұрын

Look at the settings shown from 03:00 minutes play time. The correct interface setting is important.

Merhaba, Türkiye den yazıyorum. Aynı modeme sahibim bu modem ile başım dertte yardıma ihtiyacim. Bu modem gün içinde 1 2 defa kopuyor. Ve modemi yeniden başlatmadan internet bağlantısı gelmiyor. Sorunu nasıl çözebiliriz. ?

@ZyxelSupportCampus

2 жыл бұрын

Merhaba, lütfen doğrudan support.zyxel.eu ile iletişime geçin

The second and third light not coming on and I have no internet

@ZyxelSupportCampus

2 ай бұрын

Hi @zenspa please check if the device is good for your internet connection and the cables are correct wired and installed. Please also check with your internet provider, if the DSL line is up and in service.

For some reason I can't enable TKIP, it's only AES. One of my devices need it to connect but it's not there.

@ZyxelSupportCampus

3 жыл бұрын

Hello Jack, TKIP is totally outdated and not save anymore. You need to use an actual and fast WLAN client that can connect to the WLAN using AES security key.

@spudhead169

3 жыл бұрын

@@ZyxelSupportCampus Lol, here's Zyxel lecturing about outdated concepts when their routers can't even break 100mbps LANWLAN throughput due to the totally inadequate and outdated hardware of the rest of the router. They give you VLANs but neglect to allow you to set PVIDs for each port. They still use JSON for configuration (LUA has been out for decades guys) and WORST of all, absolutely the worst, they STILL use Broadcom chipsets (Absolutely the worst scumbag anti open-source company ever).

@ZyxelSupportCampus

3 жыл бұрын

@@spudhead169 I understand your concerns. Please regard that in this category of this kind of devices we have a wide market of suppliers that offer nice price internet access devices. Using a specific chipset means you can use the already developed firmware and functions again in a new device. Zyxel offers other routers that are powerful of speed and VPN / WLAN have the latest technology. This segment is made for entry level IAD and usable in all areas that use same xDSL annexes and profile. The same rule for all technical things also apply here: you want more - you pay more. Thank you for your valuable question.

I have established optical fibre 100 mbps. How am I going to set up VMG8623-T50B in order to perform VOIP and fritz 7490 to operate for internet and routing

@ZyxelSupportCampus

2 жыл бұрын

Thanks for this notice, but what is the question :)?

@Maninthesky19

2 жыл бұрын

@@ZyxelSupportCampus what are the steps to bridge zyxel and fritz box in order the first to perform VOIP and the latter internet and routing

@ZyxelSupportCampus

2 жыл бұрын

@@Maninthesky19 I believe that both devices have equal functions and you need to choose one of the devices. The VoIP needs to be configured in both devices, if the VMG8623 came from your provider, it may be configured already and does not need a twist. Then you can let the device switch to bridge mode by your ISP and then use the Fritzbox connected by a LAN port as router.

@Maninthesky19

2 жыл бұрын

@@ZyxelSupportCampus according to my provider only zyxel should provide VOIP and fritz will support internet and routing. The question is which actions do I have to perform to establish the above mentioned

@ZyxelSupportCampus

2 жыл бұрын

@@Maninthesky19 then the VMG8623 device must be set to "Bridge Mode" means no routing and no DHCP, this task is for the Fritzbox then. If you have questions about this, please get in touch on support.zyxel.eu

Hello i have a Zyxel VMG8623-T50B and i can't log in to router menu...Password is correct and still i got i message ''Setting not successful. Please try again.'' Ihave already reset it about 2-3 times and still nothing!Please can u help me???

@ZyxelSupportCampus

2 жыл бұрын

@aggelos zigou the device may be given from your provider that blocked this feature, because this high end IAD is mend to be remotely operated by providers and they have all rights to configure the device. See: kzread.info/dash/bejne/iKt2uditdtyrm7g.html

again.... WHERE YOU PUT THAT GREY CABLE?.......................

@ZyxelSupportCampus

2 жыл бұрын

Dear Tarot, the grey cable is for a xDSL connection between your DSL-Provider wall box and the grey xDSL connection of the device on the backside.

I dont have gray plug

@ZyxelSupportCampus

5 ай бұрын

Hi, You mean there is no gray port on the device or ther was not a gray cable included? The cable is available in every shop that sells telephone accessory. If the device does not have a gray port it is not the VMG3625-Series, but an EX... something. Please check.

Where do I insert an LTE sim on this router?

@ZyxelSupportCampus

2 жыл бұрын

Hi there is no slot for the SIM Card but you can connect an LTE-USB-Dongle that then uses a SIM card to run the LTE backup WAN

where can i find the option for DMZ ?

@ZyxelSupportCampus

2 жыл бұрын

Hi Tamer, DMZ is available in the firewall settings, if the device is not managed by your ISP in regards to the security settings.

@tamer3009

2 жыл бұрын

@@ZyxelSupportCampus thanks but i bought this device from my isp but they removed every important thing in the settings can i install the original firmware for it do u support that cuz i cannot use my internet for work and i am working from home

How to connect Zyxel VMG3625-T50B to set-top-box wirelessly or how to connect Zyxel VMG3625-T50B to TV wirelessly. Which Wifi, 2.4 GHz or 5 GHz to use in that case.

@ZyxelSupportCampus

Жыл бұрын

This depends on your TV / Stet-Top-Box, but if you have the same SSID for both WLAN, the device will choose the best connection itself.

@navirolok2574

Жыл бұрын

Thank you for reply. In the picture of the application of the VMG3625-T50B device in its documentation, the connection to the STB is Ethernet, so it is not really clear to me whether it is even possible to wirelessly connect the VMG3625-T50B and the STB (or the TV directly). Does the device need to be specially configured for wireless connection?

@ZyxelSupportCampus

Жыл бұрын

@@navirolok2574 of course a LAN connection is stable and relieves the WLAN from stronger trafic if you stream TV on WLAN. Possibly the other clients may face performance issues. So if there is an option to connect the LAN by wire, then you should choose this option primary. The TV and STB device must connect with their internal WLAN client to the SSID of the VMG3625-T50B

@navirolok2574

Жыл бұрын

@@ZyxelSupportCampusThank you for your reply. What exactly does an internal WLAN client mean? What needs to be configured in the internal WLAN client to enable a wireless connection to the VMG3625-T50B.

@ZyxelSupportCampus

Жыл бұрын

@@navirolok2574 your TV or STB must have a module that can connect to WLAN 😁

I need firmware for ZyXEL VMG3625-T50B with it's password to login after setup it

@ZyxelSupportCampus

Жыл бұрын

Hi Amir, when you update the generic firmware the access to the device is written on the backside label. If necessary do a factory reset by using the reset button and push it with a pin for >12 seconds. If you updated a service provider firmware, the user name and password can be set by the provider to avoid customers to manipulate the device settings. In this case you need to check with the source, from where you got the firmware.

My internet keep saying that it’s on but I don’t have internet

@ZyxelSupportCampus

3 жыл бұрын

Please check with your internet provider company, if they deliver the internet with a VLAN setting. As example the German Telekom delivers Internet on VLAN 7, Entertain on VLAN 8. If the interface setting is not correct, there is not traffic coming from the internet to your home network. Check the user manual how to set the VLAN tag or get in contact with us @support.zyxel.eu

Any way to get vpn pls help

@ZyxelSupportCampus

2 жыл бұрын

Dear Lalad, please specify what you want to establish by VPN. More details on how to use VPN: support.zyxel.eu/hc/en-us/articles/360012528960-VPN-Guideline-Choosing-the-right-VPN-type-for-your-Home-Office-Useful-Links-Tutorials-

I can't access the website

@ZyxelSupportCampus

Жыл бұрын

Which website? Router GUI or any page in the web?

@mufunwamuthige5357

Жыл бұрын

@@ZyxelSupportCampus the login in page, but I managed All I needed to do was use an Ethernet to connect to the WiFi and I could access it

Advantage of Fullcone NAT ?

@ZyxelSupportCampus

Жыл бұрын

Hi Mohy, please explain what you mean. It is a Router with private Network and NAT routing TCP/IP.

@mohyezz532

Жыл бұрын

@@ZyxelSupportCampus Broadband, Routing Feature , Fullcone NAT

@mohyezz532

Жыл бұрын

@@ZyxelSupportCampus VMG3625-T50B

@ZyxelSupportCampus

Жыл бұрын

@@mohyezz532 yes it is fully supported NAT 1:1

I have the Zyxel EMG3525-T50B - it physically looks very similar and the configuration interface looks the same too. Is there any functional difference? My Zyxel recently just suddenly stopped forwarding requests on all my ports - didn't change anything. The only port that still gets forwarded is my SQL Server 1433 port. Really weird.

@ZyxelSupportCampus

3 жыл бұрын

Dear Manny, the housing and the graphical user interface come out of the same product development, but the interface to the WAN is not a modem, but an Ethernet Port. So the settings for this interface are different and will also be managed by your service provider. But you can always get in contact with our support at support.zyxel.eu

@mannylocatelli8977

3 жыл бұрын

@@ZyxelSupportCampus hi i managed to figure out this issue. it wasnt that my service provider was blocking any ports - i was experiencing something called "hairpinning" (or NAT Loopback). which was a silly error on my part.

@tamer3009

2 жыл бұрын

@@ZyxelSupportCampus well i contacted the support hope they send me the original firmware

Emg3525 t50b user name and password is wrong or blocked

@ZyxelSupportCampus

Жыл бұрын

Hi Mojalefa, if you received the device from your internet provider this can be blocked by them to avoid users from changing configuration. If you got the device in the market, please push the reset button with a pin for >12 seconds and wait until all LED light up once. Then the credentials from the backlabel are valid again. If the device has no such credentials it is a customized device for an internet provider. So then no chance to change it.

I don't see login name and password at the back

@ZyxelSupportCampus

2 жыл бұрын

Dear @a in this case you have a generic model and the login is admin and "1234" make sure the original label was not removed or washed away.

Dont buy that modem. İt has red light problem. And it never fixing. When everything is normal but suddenly ethernet light turns red when you restart the modem.

@ZyxelSupportCampus

2 жыл бұрын

Please check how you restart the modem, because it needs a few seconds for flushing the IP configuration. Depending on what setting is on the port and the connected device, you should wait for 20 seconds wen the device is powered down, then count from 20 to 40 and power it up again. If the issue stays, let our support know.

I have a lot less settings in that side menu than you

@ZyxelSupportCampus

Жыл бұрын

Hi, this is based on the fact if you use a generic device or it comes from a provider with specific settings.

This router is garbage. Wifi coverage is so poor, If im only a few feet away the signal bars drop to almost nothing, rubbish.

@ZyxelSupportCampus

2 жыл бұрын

Hi Manu0987, this may happen if you are in territory where the WiFi channels are occupied by other access-points or military base. In this case you may face the same issue with any WLAN device. If it is only this specific device that shows the issue, please get in contact with your provider or reseller to get warranty service. You should place the device in an open indoor space as shown in the video to get the best result and WLAN coverage.

@Dr.Geek-ZA

2 жыл бұрын

Agree, doesn't support WDS so can't even use it as a repeater!